Instalação do driver via chrome9 no Semp Toshiba IS1522

[jcao]

Olá pessoal
Estou seguindo os passos do rogerio.miguel no tópico sobre como instalar e ativar o drive da via chrome9 no ubuntu 8.04...
http://ubuntuforum-br.org/index.php/topic,40174.0.html

cheguei até o item 9, mas agora ao entrar no item 10

make oldconfig

está retornando a mensagem

make: *** No rule to make target 'oldconfig'. Stop.

o que está acontecendo e que posso fazer?

[jcao]

Era o caminho que estava errado.
Acertei o caminho e tudo funciomou OK.

[yoneharafelipe]

mas funcionou a renderização direta? na saida do comando glxinfo existe:
"direct rendering: YES" ?
Se existe por favor poste seu xorg.conf e a saida do seu lspci.

meu lspci:

00:00.0 Host bridge: VIA Technologies, Inc. P4M900 Host Bridge
00:00.1 Host bridge: VIA Technologies, Inc. P4M900 Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. P4M900 Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. P4M900 Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. P4M900 Host Bridge
00:00.5 PIC: VIA Technologies, Inc. P4M900 I/O APIC Interrupt Controller
00:00.6 Host bridge: VIA Technologies, Inc. P4M900 Security Device
00:00.7 Host bridge: VIA Technologies, Inc. P4M900 Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
00:02.0 PCI bridge: VIA Technologies, Inc. P4M900 PCI to PCI Bridge Controller (rev 80)
00:03.0 PCI bridge: VIA Technologies, Inc. P4M900 PCI to PCI Bridge Controller (rev 80)
00:0f.0 IDE interface: VIA Technologies, Inc. VT8237A SATA 2-Port Controller (rev 80)
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 07)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0)
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237A PCI to ISA Bridge
00:11.7 Host bridge: VIA Technologies, Inc. VT8251 Ultra VLINK Controller
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 7c)
00:13.0 PCI bridge: VIA Technologies, Inc. VT8237A Host Bridge
00:13.1 PCI bridge: VIA Technologies, Inc. VT8237A PCI to PCI Bridge
01:00.0 VGA compatible controller: VIA Technologies, Inc. Chrome9 HC IGP (rev 01)
04:01.0 Audio device: VIA Technologies, Inc. VIA High Definition Audio Controller (rev 10)
05:01.0 Ethernet controller: Atheros Communications Inc. AR2413 802.11bg NIC (rev 01)

eu não sei identificar qual o chipset reside meu notebook semptoshiba is1522
abraços

[Electro]

Olá,

gostaria de saber se você fez progresso.

Já tentei várias configurações e não consegui
fazer o X-server funcionar além de 800x600
(com driver vesa).

Baixei o driver no site da Via e tentei as
dicas do Morimoto, mas nada.

Tenho a impressão de que o problema
é a conf. do monitor, apesar do comando
      # modprobe via-agp   
dar pau.


Agradeço a colaboração.

Notebook: Semp Toshiba IS 1522
vídeo:   VIA Chrome9 HC IGP

[sauloandrade]

Pessoal,
executei o tutorial http://ubuntuforum-br.org/index.php/topic,40174.0.html, originalmente feito para o Itautec, na sua última versão (kernel 2.6.24.22) e funcionou perfeitamente nomeu notebook. Finalmente esta dando gosto usar o ubuntu no semp tohiba IS1522. segue meu Xorg final.

Código Selecionar Expandir


# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "abnt2"
Option "XkbLayout" "br"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "vmmouse"
EndSection

Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizEdgeScroll" "0"
EndSection

Section "Device"
Driver "via"
Identifier "Configured Video Device"
Option "LCDPort" "DFP_HIGHLOW"
EndSection


Section "Monitor"
Identifier "Monitor"
EndSection

Section "Screen"
Identifier "Default Screen"
Device "Configured Video Device"
Monitor "Monitor"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1280x800"
Virtual 1280 800
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Synaptics Touchpad"
EndSection

Section "Module"
Load  "glx"
Load  "dri"
Load  "extmod"
EndSection

Section "DRI"
Group 0
Mode 0666
EndSection


e o meu lspci:

Código Selecionar Expandir


00:00.0 Host bridge: VIA Technologies, Inc. P4M900 Host Bridge
00:00.1 Host bridge: VIA Technologies, Inc. P4M900 Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. P4M900 Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. P4M900 Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. P4M900 Host Bridge
00:00.5 PIC: VIA Technologies, Inc. P4M900 I/O APIC Interrupt Controller
00:00.6 Host bridge: VIA Technologies, Inc. P4M900 Security Device
00:00.7 Host bridge: VIA Technologies, Inc. P4M900 Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
00:02.0 PCI bridge: VIA Technologies, Inc. P4M900 PCI to PCI Bridge Controller (rev 80)
00:03.0 PCI bridge: VIA Technologies, Inc. P4M900 PCI to PCI Bridge Controller (rev 80)
00:0f.0 IDE interface: VIA Technologies, Inc. VT8237A SATA 2-Port Controller (rev 80)
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 07)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0)
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237A PCI to ISA Bridge
00:11.7 Host bridge: VIA Technologies, Inc. VT8251 Ultra VLINK Controller
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 7c)
00:13.0 PCI bridge: VIA Technologies, Inc. VT8237A Host Bridge
00:13.1 PCI bridge: VIA Technologies, Inc. VT8237A PCI to PCI Bridge
01:00.0 VGA compatible controller: VIA Technologies, Inc. Chrome9 HC IGP (rev 01)
04:01.0 Audio device: VIA Technologies, Inc. VIA High Definition Audio Controller (rev 10)
05:01.0 Ethernet controller: Atheros Communications Inc. AR2413 802.11bg NIC (rev 01)


Espero que isso ajude a quem esta precisando.