Problemas com placa de tv digital.

[seudusso]

Senhores,

Comprei uma visus tv extreme e não consigo faze-la funcionar no ubuntu 10.10.
Aguem por favor tem alguma ideia de como colocar está placa para funcionar.

obrigado.

[navegantesdailusao]

Olá, fez a atualizacao...

instalou o alsa mixer???


abs

[seudusso]

navegantesdailusao,

A atualização que fiz foi a de segurança e de pacotes ou tem mais alguma coisa que deveria atualiza?
Eu instalei o alsa mix sim.

Abraços.

[Tota]

Senhores,

Comprei uma visus tv extreme e não consigo faze-la funcionar no ubuntu 10.10.
Aguem por favor tem alguma ideia de como colocar está placa para funcionar.

obrigado.

Ola

Sem postar o resultado para placas usb

Código Selecionar Expandir

sudo lsusb

ou para placas pci

Código Selecionar Expandir

sudo lspci
fica bem mais dificil ajudar.

Veja qual sua placa, e poste o resultado.

[]'s

[seudusso]

Resultado:

ubuntu@ubuntu:~$ sudo lsusb
Bus 002 Device 002: ID 1210:048e DigiTech
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 1f4d:6650 G-Tek Electronics Group (Minha Placa USB visustv De captura)
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

[Tota]

Bus 001 Device 003: ID 1f4d:6650 G-Tek Electronics Group (Minha Placa USB visustv De captura)

Esta é sua placa. Pesquisei na net sobre ela e não encontrei suporte a esta placa, o que não quer dizer que não funcione.

O que ocorre é que o fabricante da placa é esta g-tek e o vendedor é Visus, que importa produtos Oem da China.

Se tem windows instalado, voce pode ir no gerenciador de dispositivos e em propriedades verificar qual o chipset da placa. Alternativamente, voce pode, com cuidado, abrir o dispositivo e com uma lente de aumentos verificar nos dois chips maiores qual o fabricante deles e o numero.

Com isto voce pode pesquisar mais na rede.

Infelizmente.

Só para confirmar, entre em terminal e digite sem a placa de tv

Código Selecionar Expandir

sudo dmesg

Plugue a placa e digite novamente o comando.

Voce ira ver que algumas linhas de informação foram adicionadas ao dmesg

Copie e cole estas linhas aqui para confirmar.

[]'s

[reubu]

Não sei se ajuda mas vai: eu estou usando o debian 6.0.1  e vou postar aqui o resultado do lsusb e dmesg
1 : lsusb

lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 1bcf:05ca Sunplus Innovation Technology Inc.
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 1c4f:0002 SiGma Micro
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 005: ID 1f4d:6650 G-Tek Electronics Group
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
renato@debian:~$
A  visus extreme  aparece como  ID 1f4d:6650 G-Tek Electronics Group.


[    0.362278] udev[56]: starting version 164
[    0.430619] usbcore: registered new interface driver usbfs
[    0.430708] usbcore: registered new interface driver hub
[    0.430795] usbcore: registered new device driver usb
[    0.436314] SCSI subsystem initialized
[    0.447018] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.447044]   alloc irq_desc for 23 on node -1
[    0.447046]   alloc kstat_irqs on node -1
[    0.447052] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.447064] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.447067] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.447081] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.447099] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[    0.447107] ehci_hcd 0000:00:1d.7: debug port 1
[    0.450688] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[    0.450708]   alloc irq_desc for 19 on node -1
[    0.450709]   alloc kstat_irqs on node -1
[    0.450715] via-rhine 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    0.455944] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.456244] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9ffbc00
[    0.457255] eth0: VIA Rhine III at 0x1e800, f0:7d:68:fe:d8:1e, IRQ 19.
[    0.457981] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
[    0.458139] libata version 3.00 loaded.
[    0.471881] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.471908] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.471911] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.471914] usb usb1: Product: EHCI Host Controller
[    0.471917] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[    0.471919] usb usb1: SerialNumber: 0000:00:1d.7
[    0.471989] usb usb1: configuration #1 chosen from 1 choice
[    0.472010] hub 1-0:1.0: USB hub found
[    0.472015] hub 1-0:1.0: 8 ports detected
[    0.472218] ata_piix 0000:00:1f.1: version 2.13
[    0.472230]   alloc irq_desc for 18 on node -1
[    0.472231]   alloc kstat_irqs on node -1
[    0.472237] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.472268] ata_piix 0000:00:1f.1: setting latency timer to 64
[    0.472318] scsi0 : ata_piix
[    0.472406] scsi1 : ata_piix
[    0.473111] uhci_hcd: USB Universal Host Controller Interface driver
[    0.473367] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    0.473369] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    0.473658] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.473664] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.473666] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.473674] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.473696] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c480
[    0.473722] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    0.473724] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.473725] usb usb2: Product: UHCI Host Controller
[    0.473727] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[    0.473728] usb usb2: SerialNumber: 0000:00:1d.0
[    0.473780] usb usb2: configuration #1 chosen from 1 choice
[    0.473800] hub 2-0:1.0: USB hub found
[    0.473804] hub 2-0:1.0: 2 ports detected
[    0.473845]   alloc irq_desc for 22 on node -1
[    0.473846]   alloc kstat_irqs on node -1
[    0.473852] ata_piix 0000:00:1f.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[    0.473855] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    0.473880] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.473953] scsi2 : ata_piix
[    0.474000] scsi3 : ata_piix
[    0.475111] ata3: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xb880 irq 22
[    0.475113] ata4: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb888 irq 22
[    0.475148] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.475153] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.475155] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.475161] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.475187] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c800
[    0.475213] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.475215] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.475217] usb usb3: Product: UHCI Host Controller
[    0.475218] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[    0.475219] usb usb3: SerialNumber: 0000:00:1d.1
[    0.475270] usb usb3: configuration #1 chosen from 1 choice
[    0.475289] hub 3-0:1.0: USB hub found
[    0.475293] hub 3-0:1.0: 2 ports detected
[    0.475325] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.475330] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.475332] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.475337] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.475362] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c880
[    0.475388] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.475389] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.475391] usb usb4: Product: UHCI Host Controller
[    0.475392] usb usb4: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[    0.475393] usb usb4: SerialNumber: 0000:00:1d.2
[    0.475434] usb usb4: configuration #1 chosen from 1 choice
[    0.475456] hub 4-0:1.0: USB hub found
[    0.475460] hub 4-0:1.0: 2 ports detected
[    0.475491] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    0.475496] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    0.475498] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.475505] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    0.475532] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000cc00
[    0.475556] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.475558] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.475559] usb usb5: Product: UHCI Host Controller
[    0.475560] usb usb5: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[    0.475562] usb usb5: SerialNumber: 0000:00:1d.3
[    0.475601] usb usb5: configuration #1 chosen from 1 choice
[    0.475618] hub 5-0:1.0: USB hub found
[    0.475623] hub 5-0:1.0: 2 ports detected
[    0.647887] ata4.01: NODEV after polling detection
[    0.648036] ata3.00: ATA-8: ST31000528AS, CC38, max UDMA/133
[    0.648039] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    0.655852] ata4.00: ATAPI: TSSTcorp CDDVDW SH-S203D, SB00, max UDMA/100
[    0.664032] ata3.00: configured for UDMA/133
[    0.664145] scsi 2:0:0:0: Direct-Access     ATA      ST31000528AS     CC38 PQ: 0 ANSI: 5
[    0.671820] ata4.00: configured for UDMA/100
[    0.673903] scsi 3:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-S203D  SB00 PQ: 0 ANSI: 5
[    0.678883] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 também/931 GiB)
[    0.678969] sd 2:0:0:0: [sda] Write Protect is off
[    0.678971] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.678987] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.679087]  sda:sr0: scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 cdda tray
[    0.683236] Uniform CD-ROM driver Revision: 3.20
[    0.683329] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    0.685959]  sda1 sda2 < sda5 sda6 >
[    0.701057] sd 2:0:0:0: [sda] Attached SCSI disk
[    0.704665] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    0.704902] sr 3:0:0:0: Attached scsi generic sg1 type 5
[    0.899007] usb 1-4: new high speed USB device using ehci_hcd and address 4
[    0.968455] PM: Starting manual resume from disk
[    0.968457] PM: Resume from partition 8:5
[    0.968458] PM: Checking hibernation image.
[    0.968630] PM: Error -22 checking image file
[    0.968633] PM: Resume from disk failed.
[    0.993181] kjournald starting.  Commit interval 5 seconds
[    0.993194] EXT3-fs: mounted filesystem with ordered data mode.
[    1.030359] usb 1-4: New USB device found, idVendor=1f4d, idProduct=6650
[    1.030362] usb 1-4: New USB device strings: Mfr=16, Product=32, SerialNumber=64
[    1.030364] usb 1-4: Product: Hybrid SBTD-T USB
[    1.030365] usb 1-4: Manufacturer: Geniatech
[    1.030366] usb 1-4: SerialNumber: 2004090820040908
[    1.030437] usb 1-4: configuration #1 chosen from 1 choice
[    1.272015] usb 2-1: new low speed USB device using uhci_hcd and address 2
[    1.484631] usb 2-1: New USB device found, idVendor=1c4f, idProduct=0002
[    1.484636] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.484639] usb 2-1: Product: USB Keykoard
[    1.484641] usb 2-1: Manufacturer: USB
[    1.484717] usb 2-1: configuration #1 chosen from 1 choice
[    1.724513] usb 3-1: new low speed USB device using uhci_hcd and address 2
[    1.757594] udev[473]: starting version 164
[    1.897089] usb 3-1: New USB device found, idVendor=1bcf, idProduct=05ca
[    1.897091] usb 3-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    1.897093] usb 3-1: Product: 2.4GHz 2way RF Receiver
[    1.897159] usb 3-1: configuration #1 chosen from 1 choice
[    2.053893] parport_pc 00:06: reported by Plug and Play ACPI
[    2.053997] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[    2.057073] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    2.057079] ACPI: Power Button [PWRB]
[    2.057116] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    2.057118] ACPI: Power Button [PWRF]
[    2.057588] ACPI: SSDT 000000007ffa00f0 00214 (v01    AMI   CPU1PM 00000001 INTL 20060113)
[    2.057770] processor LNXCPU:00: registered as cooling_device0
[    2.057977] ACPI: SSDT 000000007ffa0310 00143 (v01    AMI   CPU2PM 00000001 INTL 20060113)
[    2.058387] input: PC Speaker as /devices/platform/pcspkr/input/input3
[    2.058837] processor LNXCPU:01: registered as cooling_device1
[    2.181499] intel_rng: FWH not detected
[    2.279739] usbcore: registered new interface driver hiddev
[    2.280516] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[    2.292788] input: USB USB Keykoard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input4
[    2.292849] generic-usb 0003:1C4F:0002.0001: input,hidraw0: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-0000:00:1d.0-1/input0
[    2.384919] [drm] Initialized drm 1.1.0 20060810
[    2.525418] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.525423] nouveau 0000:01:00.0: setting latency timer to 64
[    2.527382] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x298200a2)
[    2.528014] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[    2.573884] [drm] nouveau 0000:01:00.0: ... appears to be valid
[    2.573887] [drm] nouveau 0000:01:00.0: BIT BIOS found
[    2.573889] [drm] nouveau 0000:01:00.0: Bios version 62.98.6f.00
[    2.573891] [drm] nouveau 0000:01:00.0: TMDS table revision 2.0 not currently supported
[    2.573893] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
[    2.573896] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4
[    2.573898] [drm] nouveau 0000:01:00.0:   0: 0x00001030: type 0x30 idx 0 tag 0x07
[    2.573900] [drm] nouveau 0000:01:00.0:   1: 0x00000200: type 0x00 idx 2 tag 0xff
[    2.573902] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 02000300 00000028
[    2.573904] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 01000302 00020030
[    2.573906] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 04011310 00000028
[    2.573922] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xD691
[    2.624160] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xDA96
[    2.648008] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE392
[    2.648017] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xE460
[    2.656081] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xE716
[    2.656084] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xE77B
[    2.680012] [drm] nouveau 0000:01:00.0: 0xE77B: Condition still not met after 20ms, skipping following opcodes
[    2.680021] [drm] nouveau 0000:01:00.0: 0xC4C8: parsing output script 0
[    2.749725] [TTM] Zone  kernel: Available graphics memory: 1030334 kiB.
[    2.749734] [drm] nouveau 0000:01:00.0: 512 MiB VRAM
[    2.765630] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[    2.766234] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1
[    2.769693] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
[    2.770182] [drm] nouveau 0000:01:00.0: Detected a DAC output
[    2.770184] [drm] nouveau 0000:01:00.0: Detected a TMDS output
[    2.770186] [drm] nouveau 0000:01:00.0: Detected a DAC output
[    2.770188] [drm] nouveau 0000:01:00.0: Detected a DVI-I connector
[    2.770227] [drm] nouveau 0000:01:00.0: Detected a VGA connector
[    2.950749] [drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x40250000, bo ffff88007dfe1a00
[    2.955218] [drm] nouveau 0000:01:00.0: 0x11C1: parsing clock script 0
[    2.955624] Console: switching to colour frame buffer device 160x64
[    2.957076] fb0: nouveaufb frame buffer device
[    2.957077] registered panic notifier
[    2.957084] [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0
[    3.023911] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    3.023939] HDA Intel 0000:00:1b.0: setting latency timer to 64
[    3.215824] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
[   12.309597] /build/buildd-linux-2.6_2.6.32-32-amd64-LHwob_/linux-2.6-2.6.32/debian/build/source_amd64_none/drivers/hid/usbhid/hid-core.c: usb_submit_urb(ctrl) failed
[   12.309625] generic-usb 0003:1C4F:0002.0002: timeout initializing reports
[   12.309744] input: USB USB Keykoard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input6
[   12.309826] generic-usb 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Device [USB USB Keykoard] on usb-0000:00:1d.0-1/input1
[   12.324322] input: 2.4GHz 2way RF Receiver as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input7
[   12.324376] generic-usb 0003:1BCF:05CA.0003: input,hidraw2: USB HID v1.00 Keyboard [2.4GHz 2way RF Receiver] on usb-0000:00:1d.1-1/input0
[   12.356489] input: 2.4GHz 2way RF Receiver as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/input/input8
[   12.356608] generic-usb 0003:1BCF:05CA.0004: input,hiddev0,hidraw3: USB HID v1.00 Mouse [2.4GHz 2way RF Receiver] on usb-0000:00:1d.1-1/input1
[   12.356628] usbcore: registered new interface driver usbhid
[   12.356630] usbhid: v2.6:USB HID core driver
[   12.713312] Adding 4022264k swap on /dev/sda5.  Priority:-1 extents:1 across:4022264k
[   12.933473] EXT3 FS on sda1, internal journal
[   12.980186] loop: module loaded
[   13.381904] kjournald starting.  Commit interval 5 seconds
[   13.382250] EXT3 FS on sda6, internal journal
[   13.382256] EXT3-fs: mounted filesystem with ordered data mode.
[   14.764062] fuse init (API version 7.13)
[   15.003633] RPC: Registered udp transport module.
[   15.003634] RPC: Registered tcp transport module.
[   15.003635] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   15.077631] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   15.165232] svc: failed to register lockdv1 RPC service (errno 97).
[   15.165849] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[   15.175215] NFSD: starting 90-second grace period
[   15.916285] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[   16.056323] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input9
[   17.732876] [drm] nouveau 0000:01:00.0: Allocating FIFO number 2
[   17.736302] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 2
[   18.463937] Bluetooth: Core ver 2.15
[   18.463972] NET: Registered protocol family 31
[   18.463974] Bluetooth: HCI device and connection manager initialized
[   18.463975] Bluetooth: HCI socket layer initialized
[   18.491606] Bluetooth: L2CAP ver 2.14
[   18.491607] Bluetooth: L2CAP socket layer initialized
[   18.535313] Bluetooth: RFCOMM TTY layer initialized
[   18.535319] Bluetooth: RFCOMM socket layer initialized
[   18.535320] Bluetooth: RFCOMM ver 1.11
[   18.635443] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   18.635446] Bluetooth: BNEP filters: protocol multicast
[   18.736082] Bridge firewalling registered
[   18.862218] Bluetooth: SCO (Voice Link) ver 0.6
[   18.862220] Bluetooth: SCO socket layer initialized
[   19.460412] lp0: using parport0 (interrupt-driven).
[   19.488414] ppdev: user-space parallel port driver
[   25.167580] CPU0 attaching NULL sched-domain.
[   25.167586] CPU1 attaching NULL sched-domain.
[   25.188580] CPU0 attaching sched-domain:
[   25.188585]  domain 0: span 0-1 level MC
[   25.188588]   groups: 0 1
[   25.188594] CPU1 attaching sched-domain:
[   25.188597]  domain 0: span 0-1 level MC
[   25.188599]   groups: 1 0
[   26.816007] eth0: no IPv6 routers present
[   40.719585] UDF-fs: No VRS found
[   40.719587] UDF-fs: No partition found (1)
[   40.792948] ISO 9660 Extensions: Microsoft Joliet Level 3
[   40.820524] ISO 9660 Extensions: RRIP_1991A
[ 3930.557906] usb 1-4: USB disconnect, address 4
[ 3935.720014] usb 1-4: new high speed USB device using ehci_hcd and address 5
[ 3935.858313] usb 1-4: New USB device found, idVendor=1f4d, idProduct=6650
[ 3935.858317] usb 1-4: New USB device strings: Mfr=16, Product=32, SerialNumber=64
[ 3935.858320] usb 1-4: Product: Hybrid SBTD-T USB
[ 3935.858323] usb 1-4: Manufacturer: Geniatech
[ 3935.858325] usb 1-4: SerialNumber: 2004090820040908
[ 3935.858424] usb 1-4: configuration #1 chosen from 1 choice


Na linha de comando lsusb , tanto no ubuntu , quanto no debian  não muda ( o dispositivo é reconhecido como  ID 1f4d:6650 G-Tek Electronics Group )

No debian na linha de comando dmesg ai sim vi a diferençaO dispositivo é reconhecido como Product: Hybrid SBTD-T USB e pesquisa na net  achei o 2 sites do fabricantes

( http://www.geniatech.com/pa/u6813.asp)  e (http://www.mygica.com/pa/u6813.asp)  é o mesmo dispositivo  e agora precisamos de alguèm para tentar  entender estas linhas e ajudar a gente a compilar  os drives  ela usa o chip u6813 da trident inc .
bom é isso que  custou horas de sonos e epsero que tenha ajudado  aqui com estas informações >

[seudusso]

Também encontrei isso no ubuntu e no windows 7 foi identificado como Hybrid SBTD-T USB com o drive da Geniatech Inc versão 1.5.716.1.