internet discada nokia 1508i livre da enbratel

[Sir Allan Robs]

Ola pessoal.
Uma das minhas amigas gostou muito do meu Linux e me encheu de perguntas que adorei responder, na lan onde trabalho deixei ela usar durante varias horas o seu pc com o novo Os que ela amou.
O porem desta linda historia esta que a net dela é discada pelo "celular" da nokia 1508i da embratel é um tipo de fixo móvel, aff, nao sei configurar este tal de discada numca a fiz, ligando para o suporte dito tecnico da embratel, nao desmerecendo quem lá trabalha, nao tem suporte pra linux , que mundo é esse. Tem varios dias que ando tentando e nada, ela ja me pedio pra por o velho xp pra poder ter net em casa, isso esta sendo o fim, depois de tantos otimos elogios
... "o quem podera me ajudar"?
Obrigado pela ajuda

[zekkerj]

Esse aparelho é USB, não??? Pode postar a saída do comando "lsusb"

[Sir Allan Robs]

Esse aparelho é USB, não??? Pode postar a saída do comando "lsusb"

Por hora agradeço a ajuda.
otimo@pc:~$ lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 0421:018f Nokia Mobile Phones
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
otimo@pc:~$

[Sir Allan Robs]

Esse aparelho é USB, não??? Pode postar a saída do comando "lsusb"

Por hora agradeço a ajuda.
otimo@pc:~$ lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 0421:018f Nokia Mobile Phones
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
otimo@pc:~$

Olha o porque da presa ser inimiga de perfeição.
"achei" umas dicas e fui testar
daqui mesmo:
http://ubuntuforum-br.org/index.php/topic,62320.0.html
e agora esta assim:
otimo@pc:~$ wvdial
--> WvDial: Internet dialer version 1.60
--> Cannot open /dev/modem: No such file or directory
--> Cannot open /dev/modem: No such file or directory
--> Cannot open /dev/modem: No such file or directory
mas quando rodo o comando gnome ppp aparece uma caixa de dialogo pedindo pra entrar com os dados depois de pronto da esta msn:
WvDial: Internet dialer version 1.60
--> Cannot open /dev/modem: No such file or directory
--> Cannot open /dev/modem: No such file or directory
--> Cannot open /dev/modem: No such file or directory

penso que em vez de ir pra direção certa estou mais perto de devolver a maq com "xp" aff.

[zekkerj]

penso que em vez de ir pra direção certa estou mais perto de devolver a maq com "xp" aff.

Tá não. 

Bus 003 Device 002: ID 0421:018f Nokia Mobile Phones

Executa pra mim:

sudo modprobe usbserial product=0x018f vendor=0x0421

Depois acompanha a saída do comando "dmesg", pra ver qual é o nome do dispositivo que vai surgir. Pode ser "ttyUSB0", ou ainda "ttyACM0".

Na hora de discar pelo wvdial, vc tem que editar o arquivo "wvdial.conf" pra procurar o modem nesse nome de dispositivo, senão ele vai tentar discar pelo "/dev/modem" --- e falhar miseravelmente.

Dê retorno.

[Sir Allan Robs]

agora estou usando a gvt pra postar da propia maq

obrigado pela ajuda.
[    0.158176] HPET not enabled in BIOS. You might try hpet=force boot option
[    0.158256] pci 0000:00:11.5: reg 10 io port: [0xd000-0xd0ff]
[    0.158318] pci 0000:00:11.5: supports D1 D2
[    0.158370] pci 0000:00:12.0: reg 10 io port: [0xee00-0xeeff]
[    0.158380] pci 0000:00:12.0: reg 14 32bit mmio: [0xfebff800-0xfebff8ff]
[    0.158436] pci 0000:00:12.0: supports D1 D2
[    0.158439] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.158446] pci 0000:00:12.0: PME# disabled
[    0.158532] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xf0000000-0xf3ffffff]
[    0.158542] pci 0000:01:00.0: reg 14 32bit mmio: [0xfd000000-0xfdffffff]
[    0.158570] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfeaf0000-0xfeafffff]
[    0.158597] pci 0000:01:00.0: supports D1 D2
[    0.158655] pci 0000:00:01.0: bridge 32bit mmio: [0xfca00000-0xfeafffff]
[    0.158662] pci 0000:00:01.0: bridge 32bit mmio pref: [0xeff00000-0xf7efffff]
[    0.158676] pci_bus 0000:00: on NUMA node 0
[    0.158689] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.159018] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.176084] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.176302] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.176503] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.176703] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.176903] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.177105] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.177308] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.177518] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.177760] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.177766] vgaarb: loaded
[    0.178024] SCSI subsystem initialized
[    0.178166] libata version 3.00 loaded.
[    0.178362] usbcore: registered new interface driver usbfs
[    0.178392] usbcore: registered new interface driver hub
[    0.178453] usbcore: registered new device driver usb
[    0.178766] ACPI: WMI: Mapper loaded
[    0.178771] PCI: Using ACPI for IRQ routing
[    0.179065] NetLabel: Initializing
[    0.179069] NetLabel:  domain hash size = 128
[    0.179072] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.179095] NetLabel:  unlabeled traffic allowed by default
[    0.179179] Switching to clocksource tsc
[    0.180001] AppArmor: AppArmor Filesystem Enabled
[    0.180001] pnp: PnP ACPI init
[    0.180001] ACPI: bus type pnp registered
[    0.193292] pnp: PnP ACPI: found 14 devices
[    0.193298] ACPI: ACPI bus type pnp unregistered
[    0.193307] PnPBIOS: Disabled by ACPI PNP
[    0.193342] system 00:09: ioport range 0xa00-0xa0f has been reserved
[    0.193348] system 00:09: ioport range 0x290-0x29f has been reserved
[    0.193360] system 00:09: ioport range 0xa20-0xa2f has been reserved
[    0.193364] system 00:09: ioport range 0xa30-0xa3f has been reserved
[    0.193369] system 00:09: ioport range 0xa40-0xa4f has been reserved
[    0.193383] system 00:0a: ioport range 0x290-0x297 has been reserved
[    0.193388] system 00:0a: ioport range 0xc00-0xc05 has been reserved
[    0.193393] system 00:0a: ioport range 0x3e0-0x3e7 has been reserved
[    0.193397] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
[    0.193402] system 00:0a: ioport range 0x800-0x87f has been reserved
[    0.193406] system 00:0a: ioport range 0x400-0x41f has been reserved
[    0.193420] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.193425] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.193437] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[    0.193442] system 00:0d: iomem range 0xc0000-0xcffff could not be reserved
[    0.193447] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
[    0.193452] system 00:0d: iomem range 0x100000-0x1dffffff could not be reserved
[    0.193457] system 00:0d: iomem range 0xfff80000-0xffffffff has been reserved
[    0.228364] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.228369] pci 0000:00:01.0:   IO window: disabled
[    0.228378] pci 0000:00:01.0:   MEM window: 0xfca00000-0xfeafffff
[    0.228385] pci 0000:00:01.0:   PREFETCH window: 0xeff00000-0xf7efffff
[    0.228415] pci 0000:00:01.0: setting latency timer to 64
[    0.228425] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.228430] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[    0.228435] pci_bus 0000:01: resource 1 mem: [0xfca00000-0xfeafffff]
[    0.228439] pci_bus 0000:01: resource 2 pref mem [0xeff00000-0xf7efffff]
[    0.228507] NET: Registered protocol family 2
[    0.228689] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.229220] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.229332] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[    0.229446] TCP: Hash tables configured (established 16384 bind 16384)
[    0.229451] TCP reno registered
[    0.229707] NET: Registered protocol family 1
[    0.229752] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[    0.229866] pci 0000:00:11.0: Bypassing VIA 8237 APIC De-Assert Message
[    0.229881] pci 0000:01:00.0: Boot video device
[    0.230234] cpufreq-nforce2: No nForce2 chipset.
[    0.230296] Scanning for low memory corruption every 60 seconds
[    0.230512] audit: initializing netlink socket (disabled)
[    0.230538] type=2000 audit(1275296368.228:1): initialized
[    0.243601] Trying to unpack rootfs image as initramfs...
[    0.257403] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.263184] VFS: Disk quotas dquot_6.5.2
[    0.263314] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.264460] fuse init (API version 7.13)
[    0.264669] msgmni has been set to 913
[    0.269472] alg: No test for stdrng (krng)
[    0.269649] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.269657] io scheduler noop registered
[    0.269660] io scheduler anticipatory registered
[    0.269664] io scheduler deadline registered
[    0.269753] io scheduler cfq registered (default)
[    0.269956] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.270001] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.270190] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    0.270204] ACPI: Sleep Button [SLPB]
[    0.270294] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.270302] ACPI: Power Button [PWRB]
[    0.270387] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.270392] ACPI: Power Button [PWRF]
[    0.271140] ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU1._PDC] (Node dd80f150), AE_INVALID_TABLE_LENGTH
[    0.271273] processor LNXCPU:00: registered as cooling_device0
[    0.297195] isapnp: Scanning for PnP cards...
[    0.303202] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.303351] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.304145] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.306168] brd: module loaded
[    0.307115] loop: module loaded
[    0.307352] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[    0.307716]   alloc irq_desc for 20 on node -1
[    0.307723]   alloc kstat_irqs on node -1
[    0.307737] pata_acpi 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[    0.307824] pata_acpi 0000:00:0f.0: PCI INT B disabled
[    0.307862] pata_acpi 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.307905] pata_acpi 0000:00:0f.1: PCI INT A disabled
[    0.308482] Fixed MDIO Bus: probed
[    0.308549] PPP generic driver version 2.4.2
[    0.308680] tun: Universal TUN/TAP device driver, 1.6
[    0.308685] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.357155] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.357213]   alloc irq_desc for 21 on node -1
[    0.357218]   alloc kstat_irqs on node -1
[    0.357231] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[    0.357265] ehci_hcd 0000:00:10.4: EHCI Host Controller
[    0.357369] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
[    0.357466] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfebffc00
[    0.369135] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
[    0.369403] usb usb1: configuration #1 chosen from 1 choice
[    0.369466] hub 1-0:1.0: USB hub found
[    0.369488] hub 1-0:1.0: 8 ports detected
[    0.369611] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.369645] uhci_hcd: USB Universal Host Controller Interface driver
[    0.369732] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    0.369751] uhci_hcd 0000:00:10.0: UHCI Host Controller
[    0.369858] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[    0.369898] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000dc00
[    0.370106] usb usb2: configuration #1 chosen from 1 choice
[    0.370168] hub 2-0:1.0: USB hub found
[    0.370185] hub 2-0:1.0: 2 ports detected
[    0.370281] uhci_hcd 0000:00:10.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    0.370298] uhci_hcd 0000:00:10.1: UHCI Host Controller
[    0.370400] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[    0.370438] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000d880
[    0.370643] usb usb3: configuration #1 chosen from 1 choice
[    0.370707] hub 3-0:1.0: USB hub found
[    0.370725] hub 3-0:1.0: 2 ports detected
[    0.370813] uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.370829] uhci_hcd 0000:00:10.2: UHCI Host Controller
[    0.370922] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[    0.370960] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000d800
[    0.371174] usb usb4: configuration #1 chosen from 1 choice
[    0.371233] hub 4-0:1.0: USB hub found
[    0.371258] hub 4-0:1.0: 2 ports detected
[    0.371352] uhci_hcd 0000:00:10.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.371368] uhci_hcd 0000:00:10.3: UHCI Host Controller
[    0.371473] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[    0.371513] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000d480
[    0.371719] usb usb5: configuration #1 chosen from 1 choice
[    0.371776] hub 5-0:1.0: USB hub found
[    0.371794] hub 5-0:1.0: 2 ports detected
[    0.371981] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    0.377172] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.377198] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.377567] mice: PS/2 mouse device common for all mice
[    0.377936] rtc_cmos 00:02: RTC can wake from S4
[    0.378046] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.378114] rtc0: alarms up to one year, y3k, 114 bytes nvram
[    0.378347] device-mapper: uevent: version 1.0.3
[    0.378640] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    0.381059] device-mapper: multipath: version 1.1.0 loaded
[    0.381069] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.381435] EISA: Probing bus 0 at eisa.0
[    0.381489] EISA: Detected 0 cards.
[    0.383203] cpuidle: using governor ladder
[    0.383211] cpuidle: using governor menu
[    0.384083] TCP cubic registered
[    0.384326] NET: Registered protocol family 10
[    0.385252] lo: Disabled Privacy Extensions
[    0.385770] NET: Registered protocol family 17
[    0.385895] Using IPI No-Shortcut mode
[    0.386120] PM: Resume from disk failed.
[    0.386144] registered taskstats version 1
[    0.386537]   Magic number: 10:612:979
[    0.386692] rtc_cmos 00:02: setting system clock to 2010-05-31 08:59:29 UTC (1275296369)
[    0.386699] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.386702] EDD information not available.
[    0.403023] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    0.976589] isapnp: No Plug & Play device found
[    0.997778] Freeing initrd memory: 7728k freed
[    1.010045] Freeing unused kernel memory: 672k freed
[    1.011206] Write protecting the kernel text: 4828k
[    1.011293] Write protecting the kernel read-only data: 1876k
[    1.058263] udev: starting version 151
[    1.365557] Floppy drive(s): fd0 is 1.44M
[    1.395276] FDC 0 is a post-1991 82077
[    1.509204] pata_via 0000:00:0f.1: version 0.3.4
[    1.509228] pata_via 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    1.514442] scsi0 : pata_via
[    1.524391] scsi1 : pata_via
[    1.532992] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[    1.533000] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[    1.534356] sata_via 0000:00:0f.0: version 2.4
[    1.534381] sata_via 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[    1.534455] sata_via 0000:00:0f.0: routed to hard irq line 11
[    1.539724] scsi2 : sata_via
[    1.549450] scsi3 : sata_via
[    1.552762] ata3: SATA max UDMA/133 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 20
[    1.552769] ata4: SATA max UDMA/133 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 20
[    1.554762] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[    1.554840]   alloc irq_desc for 23 on node -1
[    1.554845]   alloc kstat_irqs on node -1
[    1.554859] via-rhine 0000:00:12.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.580808] eth0: VIA Rhine II at 0xfebff800, 00:16:ec:42:b7:ad, IRQ 23.
[    1.581524] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
[    1.768031] ata3: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[    1.868612] ata2.00: ATA-7: Maxtor 6K040L0, NAR61HA0, max UDMA/133
[    1.868618] ata2.00: 80293248 sectors, multi 16: LBA
[    1.868682] ata2.01: ATAPI: HL-DT-STDVD-RAM GSA-H20N, 1.00, max UDMA/33
[    1.884485] ata2.00: configured for UDMA/133
[    1.900404] ata2.01: configured for UDMA/33
[    1.902043] scsi 1:0:0:0: Direct-Access     ATA      Maxtor 6K040L0   NAR6 PQ: 0 ANSI: 5
[    1.902415] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    1.903802] sd 1:0:0:0: [sda] 80293248 512-byte logical blocks: (41.1 GB/38.2 GiB)
[    1.903912] sd 1:0:0:0: [sda] Write Protect is off
[    1.903918] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.903973] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.904375]  sda: sda1 sda2 <
[    1.928715] scsi 1:0:1:0: CD-ROM            HL-DT-ST DVD-RAM GSA-H20N 1.00 PQ: 0 ANSI: 5
[    1.949425]  sda5 >
[    1.955919] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.955928] Uniform CD-ROM driver Revision: 3.20
[    1.956332] sd 1:0:0:0: [sda] Attached SCSI disk
[    1.956874] sr 1:0:1:0: Attached scsi CD-ROM sr0
[    1.957308] sr 1:0:1:0: Attached scsi generic sg1 type 5
[    2.160024] ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[    2.503302] EXT4-fs (sda1): mounted filesystem with ordered data mode
[   11.229958] Adding 1392632k swap on /dev/sda5.  Priority:-1 extents:1 across:1392632k
[   11.342327] udev: starting version 151
[   11.504095] lp: driver loaded but no devices found
[   11.961159] parport_pc 00:08: reported by Plug and Play ACPI
[   11.961268] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[   12.023772] Linux agpgart interface v0.103
[   12.042258] lp0: using parport0 (interrupt-driven).
[   12.042850] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   12.072159] agpgart: Detected VIA VT3314 chipset
[   12.242780] agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
[   12.346662] vga16fb: initializing
[   12.346671] vga16fb: mapped to 0xc00a0000
[   12.346874] fb0: VGA16 VGA frame buffer device
[   12.358919] psmouse serio1: ID: 10 00 64
[   12.523935] ppdev: user-space parallel port driver
[   12.905261] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5
[   13.084154] Console: switching to colour frame buffer device 80x30
[   13.140559] type=1505 audit(1275307182.253:2):  operation="profile_load" pid=573 name="/sbin/dhclient3"
[   13.141558] type=1505 audit(1275307182.253:3):  operation="profile_load" pid=573 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   13.142091] type=1505 audit(1275307182.253:4):  operation="profile_load" pid=573 name="/usr/lib/connman/scripts/dhclient-script"
[   13.169623]   alloc irq_desc for 22 on node -1
[   13.169630]   alloc kstat_irqs on node -1
[   13.169644] VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[   13.169823] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
[   13.663584] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[   13.847697] type=1505 audit(1275307182.957:5):  operation="profile_load" pid=670 name="/usr/share/gdm/guest-session/Xsession"
[   13.903285] type=1505 audit(1275307183.013:6):  operation="profile_replace" pid=676 name="/sbin/dhclient3"
[   13.912328] type=1505 audit(1275307183.025:7):  operation="profile_replace" pid=676 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   13.912891] type=1505 audit(1275307183.025::  operation="profile_replace" pid=676 name="/usr/lib/connman/scripts/dhclient-script"
[   13.943703] type=1505 audit(1275307183.053:9):  operation="profile_load" pid=679 name="/usr/bin/evince"
[   13.987683] type=1505 audit(1275307183.097:10):  operation="profile_load" pid=679 name="/usr/bin/evince-previewer"
[   14.026182] type=1505 audit(1275307183.137:11):  operation="profile_load" pid=679 name="/usr/bin/evince-thumbnailer"

[Sir Allan Robs]

nao deu na primeira parte


[   15.284569] [drm] Initialized drm 1.1.0 20060810
[   15.291882]   alloc irq_desc for 16 on node -1
[   15.291889]   alloc kstat_irqs on node -1
[   15.291904] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   15.294436] [drm] Initialized via 2.11.1 20070202 for 0000:01:00.0 on minor 0
[   15.303848] agpgart-via 0000:00:00.0: AGP 3.5 bridge
[   15.303889] agpgart-via 0000:00:00.0: putting AGP V3 device into 8x mode
[   15.303987] pci 0000:01:00.0: putting AGP V3 device into 8x mode
[   24.304025] eth0: no IPv6 routers present
[   33.268816] end_request: I/O error, dev fd0, sector 0
[   45.769033] end_request: I/O error, dev fd0, sector 0
[   59.880478] end_request: I/O error, dev fd0, sector 0
[   72.048860] end_request: I/O error, dev fd0, sector 0
[   72.048873] __ratelimit: 9 callbacks suppressed
[   72.048879] Buffer I/O error on device fd0, logical block 0
[   84.221283] end_request: I/O error, dev fd0, sector 0
[   84.221299] Buffer I/O error on device fd0, logical block 0
[   96.388481] end_request: I/O error, dev fd0, sector 0
[   96.388495] Buffer I/O error on device fd0, logical block 0
[  108.556694] end_request: I/O error, dev fd0, sector 0
[  108.556709] Buffer I/O error on device fd0, logical block 0
[  120.729358] end_request: I/O error, dev fd0, sector 0
[  120.729373] Buffer I/O error on device fd0, logical block 0
[  132.892498] end_request: I/O error, dev fd0, sector 0
[  132.892512] Buffer I/O error on device fd0, logical block 0
[  145.060694] end_request: I/O error, dev fd0, sector 0
[  145.060708] Buffer I/O error on device fd0, logical block 0
[  157.228893] end_request: I/O error, dev fd0, sector 0
[  157.228908] Buffer I/O error on device fd0, logical block 0
[  169.400542] end_request: I/O error, dev fd0, sector 0
[  169.400556] Buffer I/O error on device fd0, logical block 0
[  181.568762] end_request: I/O error, dev fd0, sector 0
[  181.568777] Buffer I/O error on device fd0, logical block 0
[  193.740728] end_request: I/O error, dev fd0, sector 0
[  193.740742] Buffer I/O error on device fd0, logical block 0
[  205.912371] end_request: I/O error, dev fd0, sector 0
[  205.912385] Buffer I/O error on device fd0, logical block 0
[  218.076477] end_request: I/O error, dev fd0, sector 0
[  218.076490] Buffer I/O error on device fd0, logical block 0
[  230.248471] end_request: I/O error, dev fd0, sector 0
[  230.248484] Buffer I/O error on device fd0, logical block 0
[  242.420451] end_request: I/O error, dev fd0, sector 0
[  242.420465] Buffer I/O error on device fd0, logical block 0
[  254.592417] end_request: I/O error, dev fd0, sector 0
[  254.592431] Buffer I/O error on device fd0, logical block 0
[  266.764405] end_request: I/O error, dev fd0, sector 0
[  266.764419] Buffer I/O error on device fd0, logical block 0
[  278.936398] end_request: I/O error, dev fd0, sector 0
[  278.936412] Buffer I/O error on device fd0, logical block 0
[  291.108376] end_request: I/O error, dev fd0, sector 0
[  291.108390] Buffer I/O error on device fd0, logical block 0
[  303.272524] end_request: I/O error, dev fd0, sector 0
[  303.272538] Buffer I/O error on device fd0, logical block 0
[  315.445219] end_request: I/O error, dev fd0, sector 0
[  315.445235] Buffer I/O error on device fd0, logical block 0
[  327.616448] end_request: I/O error, dev fd0, sector 0
[  327.616463] Buffer I/O error on device fd0, logical block 0
[  339.788429] end_request: I/O error, dev fd0, sector 0
[  339.788444] Buffer I/O error on device fd0, logical block 0
[  351.956687] end_request: I/O error, dev fd0, sector 0
[  351.956701] Buffer I/O error on device fd0, logical block 0
[  364.128609] end_request: I/O error, dev fd0, sector 0
[  364.128623] Buffer I/O error on device fd0, logical block 0
[  376.296845] end_request: I/O error, dev fd0, sector 0
[  376.296861] Buffer I/O error on device fd0, logical block 0
[  388.469014] end_request: I/O error, dev fd0, sector 0
[  388.469029] Buffer I/O error on device fd0, logical block 0
[  396.152063] usb 3-2: new full speed USB device using uhci_hcd and address 2
[  396.315323] usb 3-2: configuration #1 chosen from 1 choice
[  400.640874] end_request: I/O error, dev fd0, sector 0
[  400.640890] Buffer I/O error on device fd0, logical block 0
[  412.812893] end_request: I/O error, dev fd0, sector 0
[  412.812908] Buffer I/O error on device fd0, logical block 0
[  424.984516] end_request: I/O error, dev fd0, sector 0
[  424.984536] Buffer I/O error on device fd0, logical block 0
[  437.157273] end_request: I/O error, dev fd0, sector 0
[  437.157287] Buffer I/O error on device fd0, logical block 0
[  449.333170] end_request: I/O error, dev fd0, sector 0
[  449.333184] Buffer I/O error on device fd0, logical block 0
[  461.504593] end_request: I/O error, dev fd0, sector 0
[  461.504608] Buffer I/O error on device fd0, logical block 0
[  473.680807] end_request: I/O error, dev fd0, sector 0
[  473.680822] Buffer I/O error on device fd0, logical block 0
[  485.848858] end_request: I/O error, dev fd0, sector 0
[  485.848873] Buffer I/O error on device fd0, logical block 0
[  498.020817] end_request: I/O error, dev fd0, sector 0
[  498.020832] Buffer I/O error on device fd0, logical block 0
[  510.192550] end_request: I/O error, dev fd0, sector 0
[  510.192564] Buffer I/O error on device fd0, logical block 0
[  522.360685] end_request: I/O error, dev fd0, sector 0
[  522.360699] Buffer I/O error on device fd0, logical block 0
[  534.532629] end_request: I/O error, dev fd0, sector 0
[  534.532644] Buffer I/O error on device fd0, logical block 0
[  546.700866] end_request: I/O error, dev fd0, sector 0
[  546.700883] Buffer I/O error on device fd0, logical block 0
[  558.868706] end_request: I/O error, dev fd0, sector 0
[  571.092511] end_request: I/O error, dev fd0, sector 0
[  583.256764] end_request: I/O error, dev fd0, sector 0
[  583.256778] Buffer I/O error on device fd0, logical block 0
[  595.432834] end_request: I/O error, dev fd0, sector 0
[  595.432848] Buffer I/O error on device fd0, logical block 0
[  607.604073] end_request: I/O error, dev fd0, sector 0
[  607.604088] Buffer I/O error on device fd0, logical block 0
[  619.776337] end_request: I/O error, dev fd0, sector 0
[  619.776352] Buffer I/O error on device fd0, logical block 0
[  631.948867] end_request: I/O error, dev fd0, sector 0
[  631.948882] Buffer I/O error on device fd0, logical block 0
[  644.108411] end_request: I/O error, dev fd0, sector 0
[  644.108425] Buffer I/O error on device fd0, logical block 0
[  648.531935] usbcore: registered new interface driver usbserial
[  648.534575] USB Serial support registered for generic
[  648.537714] usbserial_generic 3-2:1.0: generic converter detected
[  648.542794] usb 3-2: generic converter now attached to ttyUSB0
[  648.542852] usbserial_generic 3-2:1.1: generic converter detected
[  648.548548] usb 3-2: generic converter now attached to ttyUSB1
[  648.548645] usbcore: registered new interface driver usbserial_generic
[  648.548650] usbserial: USB Serial Driver core
[  656.268404] end_request: I/O error, dev fd0, sector 0
[  656.268420] Buffer I/O error on device fd0, logical block 0
[  668.432316] end_request: I/O error, dev fd0, sector 0
[  668.432330] Buffer I/O error on device fd0, logical block 0
[  680.608472] end_request: I/O error, dev fd0, sector 0
[  680.608488] Buffer I/O error on device fd0, logical block 0
[  692.760309] end_request: I/O error, dev fd0, sector 0
[  692.760323] Buffer I/O error on device fd0, logical block 0
[  704.924362] end_request: I/O error, dev fd0, sector 0
[  704.924377] Buffer I/O error on device fd0, logical block 0
[  717.096343] end_request: I/O error, dev fd0, sector 0
[  717.096358] Buffer I/O error on device fd0, logical block 0
[  729.260451] end_request: I/O error, dev fd0, sector 0
[  729.260470] Buffer I/O error on device fd0, logical block 0
[  741.432882] end_request: I/O error, dev fd0, sector 0
[  741.432897] Buffer I/O error on device fd0, logical block 0
[  753.608316] end_request: I/O error, dev fd0, sector 0
[  753.608330] Buffer I/O error on device fd0, logical block 0
[  765.776928] end_request: I/O error, dev fd0, sector 0
[  765.776943] Buffer I/O error on device fd0, logical block 0
[  777.948491] end_request: I/O error, dev fd0, sector 0
[  777.948505] Buffer I/O error on device fd0, logical block 0
[  790.100367] end_request: I/O error, dev fd0, sector 0
[  790.100381] Buffer I/O error on device fd0, logical block 0
[  802.268339] end_request: I/O error, dev fd0, sector 0
[  802.268353] Buffer I/O error on device fd0, logical block 0
[  814.432349] end_request: I/O error, dev fd0, sector 0
[  814.432364] Buffer I/O error on device fd0, logical block 0
[  826.600931] end_request: I/O error, dev fd0, sector 0
[  826.600946] Buffer I/O error on device fd0, logical block 0
[  838.768824] end_request: I/O error, dev fd0, sector 0
[  838.768838] Buffer I/O error on device fd0, logical block 0
[  850.940469] end_request: I/O error, dev fd0, sector 0
[  850.940484] Buffer I/O error on device fd0, logical block 0
[  863.092319] end_request: I/O error, dev fd0, sector 0
[  863.092334] Buffer I/O error on device fd0, logical block 0
[  875.256285] end_request: I/O error, dev fd0, sector 0
[  875.256299] Buffer I/O error on device fd0, logical block 0
[  887.428254] end_request: I/O error, dev fd0, sector 0
[  887.428269] Buffer I/O error on device fd0, logical block 0
[  899.596477] end_request: I/O error, dev fd0, sector 0
[  899.596491] Buffer I/O error on device fd0, logical block 0
[  911.752468] end_request: I/O error, dev fd0, sector 0
[  911.752483] Buffer I/O error on device fd0, logical block 0
[  923.916690] end_request: I/O error, dev fd0, sector 0
[  923.916705] Buffer I/O error on device fd0, logical block 0
[  936.084890] end_request: I/O error, dev fd0, sector 0
[  936.084905] Buffer I/O error on device fd0, logical block 0
[  948.256474] end_request: I/O error, dev fd0, sector 0
[  948.256489] Buffer I/O error on device fd0, logical block 0
[  960.424659] end_request: I/O error, dev fd0, sector 0
[  960.424674] Buffer I/O error on device fd0, logical block 0
[  972.592877] end_request: I/O error, dev fd0, sector 0
[  972.592892] Buffer I/O error on device fd0, logical block 0
[  984.764484] end_request: I/O error, dev fd0, sector 0
[  984.764499] Buffer I/O error on device fd0, logical block 0
[  996.940629] end_request: I/O error, dev fd0, sector 0
[  996.940643] Buffer I/O error on device fd0, logical block 0
[ 1009.108844] end_request: I/O error, dev fd0, sector 0
[ 1009.108859] Buffer I/O error on device fd0, logical block 0
[ 1021.280786] end_request: I/O error, dev fd0, sector 0
[ 1021.280800] Buffer I/O error on device fd0, logical block 0
[ 1033.452731] end_request: I/O error, dev fd0, sector 0
[ 1033.452746] Buffer I/O error on device fd0, logical block 0
[ 1045.628464] end_request: I/O error, dev fd0, sector 0
[ 1045.628478] Buffer I/O error on device fd0, logical block 0
[ 1057.800425] end_request: I/O error, dev fd0, sector 0
[ 1057.800440] Buffer I/O error on device fd0, logical block 0
[ 1069.972500] end_request: I/O error, dev fd0, sector 0
otimo@pc:~$ wvdial.conf
No command 'wvdial.conf' found, did you mean:
Command 'wvdialconf' from package 'wvdial' (main)
wvdial.conf: command not found
otimo@pc:~$

[zekkerj]

[  648.534575] USB Serial support registered for generic
[  648.537714] usbserial_generic 3-2:1.0: generic converter detected
[  648.542794] usb 3-2: generic converter now attached to ttyUSB0
[  648.542852] usbserial_generic 3-2:1.1: generic converter detected
[  648.548548] usb 3-2: generic converter now attached to ttyUSB1
[  648.548645] usbcore: registered new interface driver usbserial_generic
[  648.548650] usbserial: USB Serial Driver core

Parece que o dispositivo é o /dev/ttyUSB0, mesmo.

otimo@pc:~$ wvdial.conf
No command 'wvdial.conf' found, did you mean:
Command 'wvdialconf' from package 'wvdial' (main)
wvdial.conf: command not found
otimo@pc:~$

cat /etc/wvdial.conf

[Sir Allan Robs]

otimo@pc:~$ cat /etc/wvdial.conf
[Dialer Defaults]
Phone =
Username =
Password =
New PPPD = yes


foi isso que aconteceu com o comando.  (to meio perdido)

[zekkerj]

[Dialer Defaults]
Phone =
Username =
Password =
New PPPD = yes

brrr.

Vamos tentar assim???

Código Selecionar Expandir

[Dialer Defaults]
Modem = /dev/ttyUSB0
Init1 = ATZ
Baud = 115200
Phone = <número que você disca>
Dial Command = ATD
Username = <seu usuário>
Password = shhhhhhh!!!
Stupid Mode = 1
ISDN = 0
New PPPD = yes

Pra editar esse arquivo, vc precisa de poderes:

gksu gedit /etc/wvdial.conf

[Sir Allan Robs]

rodei o comando "gksu gedit /etc/wvdial.conf"
[Dialer Defaults]
Phone =
Username =
Password =
New PPPD = yes

ai apareceu o gedit com este testo ai acima.

[zekkerj]

Então: isso é um editor de textos, você vai alterar o arquivo pra ficar da forma como eu sugeri.