conexão discada no ubuntu 9.10 64bits

Iniciado por clovix, 22 de Novembro de 2009, 15:26

tópico anterior - próximo tópico

clovix

Boa tarde Alarcon e a todos do forum!

Estou tentando conexão discada a dias e não estou conseguindo a dias, já segui vários tópicos do Alarcon e não tive resultado positivo, coloco abaixo informações das tentativas que fiz.

Obrigado a todos.

00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev 01)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
01:01.0 Modem: ALi Corporation SmartLink SmartPCI561 56K Modem
01:04.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller (rev 14)
----------------------------------------------------------------------------

==================Arquivo ModemData.txt===========================================
Only plain text email is forwarded by the  Discuss@Linmodems.org List Server,
as HTML can contain viruses. Use as the email Subject Line:
           YourName, YourCountry  kernel 2.6.31-14-generic
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@Linmodems.org are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
--------------------------  System information ----------------------------
CPU=x86_64, 
Linux version 2.6.31-14-generic (buildd@crested) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #48-Ubuntu SMP Fri Oct 16 14:05:01 UTC 2009
scanModem update of:  2009_11_14


Presently install your Linux Distributions dkms package. It provides for automated driver updates,
following upgrade of your kernel.  For details see http://linux.dell.com/projects.shtml#dkms


Some modem drivers can only be used in 32 bit modem on x86_64 systems,
while some others are competent on x86_64 Systems.  Cases are:
1) http://linmodems.technion.ac.il/bigarch/archive-seventh/msg03119.html
for the snd-hda-intel audio+modem driver. Also applicable to AC97 modem controllers.
In both cases, 32 bit libraries must be installed to support the slmodemd helper having a precompiled 32 bit component.
2) For USB modems using the slusb.ko driver. 32 bit libraries must be installed to support the slmodemd helper having a precompiled 32 bit component
3) The hsfmodem and hcfpcimodem drivers for Conexant chipsest modes are x86_64 competent.

There are no blacklisted modem drivers in /etc/modprobe*  files

Potentially useful modem drivers now loaded are:
         snd_hda_intel       

Attached USB devices are:
ID 066f:8000 SigmaTel, Inc. MSCN MP3 Player
If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html
A sample report is:  http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html

If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@linmodems.org

For candidate card in slot 01:01.0, firmware information and bootup diagnostics are:
PCI slot   PCI ID      SubsystemID   Name
----------   ---------   ---------   --------------
01:01.0   10b9:5459   10a5:5459   Modem: ALi Corporation SmartLink SmartPCI561 56K Modem

Modem interrupt assignment and sharing:
--- Bootup diagnostics for card in PCI slot 01:01.0 ----
[    0.310796] pci 0000:01:01.0: reg 10 32bit mmio: [0xdfffb000-0xdfffbfff]
[    0.310803] pci 0000:01:01.0: reg 14 io port: [0xd400-0xd4ff]
[    0.310845] pci 0000:01:01.0: PME# supported from D3hot D3cold
[    0.310849] pci 0000:01:01.0: PME# disabled
[    0.599314] serial 0000:01:01.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    0.599586] 0000:01:01.0: ttyS1 at I/O 0xd428 (irq = 21) is a 8250
[    0.599730] 0000:01:01.0: ttyS2 at I/O 0xd440 (irq = 21) is a 8250
[    0.599833] 0000:01:01.0: ttyS3 at I/O 0xd450 (irq = 21) is a 8250
[    0.599851] Couldn't register serial port 0000:01:01.0: -28

The PCI slot 01:01.0 of the modem card may be disabled early in
a bootup process,  but then enabled later. If modem drivers load
but the  modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@linmodems.org
if help is needed.


For candidate card in slot 00:1b.0, firmware information and bootup diagnostics are:
PCI slot   PCI ID      SubsystemID   Name
----------   ---------   ---------   --------------
00:1b.0   8086:27d8   1043:8249   Audio device: Intel Corporation 82801G

Modem interrupt assignment and sharing:
19:       1409          0   IO-APIC-fasteoi   uhci_hcd:usb5, HDA Intel
--- Bootup diagnostics for card in PCI slot 00:1b.0 ----
[    0.309907] pci 0000:00:1b.0: reg 10 64bit mmio: [0xdfef8000-0xdfefbfff]
[    0.309950] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.309954] pci 0000:00:1b.0: PME# disabled
[   55.245408] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[   55.245443] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   55.408525] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5

The PCI slot 00:1b.0 of the modem card may be disabled early in
a bootup process,  but then enabled later. If modem drivers load
but the  modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@linmodems.org
if help is needed.



===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.

The ALSA verion is 1.0.20
The modem cards detected by "aplay -l"  are: None


The /proc/asound/pcm file reports:
-----------------------
00-00: ALC883 Analog : ALC883 Analog : playback 1 : capture 1
00-01: ALC883 Digital : ALC883 Digital : playback 1 : capture 1
00-02: ALC883 Analog : ALC883 Analog : capture 1

about /proc/asound/cards:
------------------------
0 [Intel          ]: HDA-Intel - HDA Intel
                      HDA Intel at 0xdfef8000 irq 19

PCI slot 00:1b.0 has a High Definition Audio Card
The drivers are in the kernel modules tree at:
/lib/modules/2.6.31-14-generic/kernel/sound/pci/hda/snd-hda-intel.ko
/lib/modules/2.6.24-21-generic/ubuntu/sound/alsa-driver/pci/hda/snd-hda-intel.ko
/lib/modules/2.6.24-22-generic/ubuntu/sound/alsa-driver/pci/hda/snd-hda-intel.ko
/lib/modules/2.6.28-11-generic/kernel/sound/pci/hda/snd-hda-intel.ko
/lib/modules/2.6.24-19-generic/ubuntu/sound/alsa-driver/pci/hda/snd-hda-intel.ko
/lib/modules/2.6.27-7-generic/kernel/sound/pci/hda/snd-hda-intel.ko
UNEXPECTED HDA diagnostic outcome.
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===

Predictive  diagnostics for card in bus 01:01.0:
   Modem chipset  detected on
NAME="Modem: ALi Corporation SmartLink SmartPCI561 56K Modem"
CLASS=0703
PCIDEV=10b9:5459
SUBSYS=10a5:5459
IRQ=21
IDENT=slamr

For candidate modem in:  01:01.0
   0703 Modem: ALi Corporation SmartLink SmartPCI561 56K Modem
      Primary device ID:  10b9:5459
Support type needed or chipset:   slamr



Writing DOCs/Intel.txt
The modem is supported by the Smartlink
plus the slmodemd helper utility.  Read the
DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow through guidance.


From  http://linmodems.technion.ac.il/packages/smartlink/Ubuntu/ ,
download the package slamr-2.6.31-14-generic.tar.gz
Under Linux, open a terminal and unpack with:
$ tar zxvf slamr*.tar.gz
Move into the unpacked folder
$ cd slamr-2.6.31-14-generic
Look around
$ ls
Run the
$  sudo ./setup

Afterwards do:
$ slmodemd --help
$ slmodemd --countrylist &> Clist.txt
If not in the USA, look for your COUNTRY_NAME therein.
Do and edit with:
$ sudo gedit  /etc/default/sl-modem-daemon
and therein replace the USA in the line:
SLMODEMD_COUNTRY=USA
This will provide for the correct Country setting in the automated:
    slmodemd -c COUNTRY /dev/slamr0

Read the DOCs/Smartlink.txt and DOCs/YourSystem.txt
Writing DOCs/Smartlink.txt
============ end Smartlink section =====================


Predictive  diagnostics for card in bus 00:1b.0:
   Modem chipset not detected on
NAME="Audio device: Intel Corporation 82801G "
CLASS=0403
PCIDEV=8086:27d8
SUBSYS=1043:8249
IRQ=19
HDA=8086:27d8
SOFT=8086:27d8.HDA


High Definition Audio (HDA) cards MAY host a modem chip in their Subsystem,
and many are supported by the ALSA audio+modem driver snd-hda-intel
A modem was not detected on HDA card 8086:27d8.
If another modem card is present, then most likely 8086:27d8 does not host a modem.
If another modem card has not been detected, then possibilities are:
   1) A Conexant modem chip is present on 8086:27d8, as Conexant chips
are frequently not detectable by ALSA diagnostics
   2) The modem may be of the older non-PCI Controller Chipset (hardware) type.
Try detection with Root permission:
   sudo wvdialconf  /etc/wvdial.conf

For candidate modem in:  00:1b.0
   0403 Audio device: Intel Corporation 82801G
      Primary device ID:  8086:27d8
    Subsystem PCI_id  1043:8249
    Softmodem codec or chipset from diagnostics:
                               from    Archives:
                       
     

Support type needed or chipset:   

Support can likely be achieved through two mutually exclusive alternatives:
1) The hsfmodem software for Conexant chipset modems: Read DOCs/Conexant.txt
The following ALSA alternative CANNOT work with Conexant modems.

2) An ALSA modem driver plus slmodemd.  Read DOCs/Smartlink.txt for details, and
to test get the package SLMODEMD.gcc4.4.tar.gz from:
   http://linmodems.technion.ac.il/packages/smartlink/


Completed candidate modem analyses.

The base of the UDEV device file system is: /dev/.udev

Versions adequately match for the compiler installed: 4.4.1
             and the compiler used in kernel assembly: 4.4.1

The patch utility is needed and is needed for compiling ALSA drivers, and possibly others.


Minimal compiling resources appear complete:
   make utility - /usr/bin/make
   Compiler version 4.4
   linuc_headers base folder /lib/modules/2.6.31-14-generic/build

However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed in  /usr/include/ .
For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default.
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.




If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$  apt-get update
$  apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb


Checking pppd properties:
   -rws--x--x 1 root dip 321600 2009-02-20 15:26 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
    http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
   $ su - root  (not for Ubuntu)
        sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
   sudo chmod a+x /usr/sbin/pppd

Checking settings of:   /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx

In case of a message like:
   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html

Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.

Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================

Checking for modem support lines:
--------------------------------------
     /device/modem symbolic link:   
slmodemd created symbolic link /dev/ttySL0: 
     Within /etc/udev/ files:

     Within /etc/modprobe.conf files:
/etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
/etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
     Within any ancient /etc/devfs files:

     Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------

zekkerj

você instalou/ativou o serviço "sl-modem-daemon"???
Pesquise antes de perguntar, sua dúvida pode já ter sido respondida.
Não respondo dúvidas por MP, coloque sua dúvida no fórum onde ela pode ser pesquisada pelos seus colegas!
Não venha ao fórum apenas para perguntar. Se você sabe a resposta de um problema, porque não ajudar seu colega? ;D

clovix

Sim segui o tutorial do Alarcon, este é o link

http://ubuntuforum-br.org/index.php/topic,48619.msg283950.html#msg283950

trecho das instruções do tutorial mas mesmo assim não deu certo.

sudo dpkg -i --force-all sl-modem-daemon_2.9.10+2.9.9d+e-pre2-5ubuntu4_i386.deb

depois de terminada a instalação e ainda com o terminal aberto execute os 7 comandos na seqüência:
Citar
sudo /etc/init.d/sl-modem-daemon stop
cd /etc
sudo sed -i -e 's/SLMODEMD_COUNTRY=USA/SLMODEMD_COUNTRY=BRAZIL/g' default/sl-modem-daemon
sudo sed -i -e 's/""/"--perm=0666"/g' default/sl-modem-daemon
sudo rm -f /usr/sbin/slmodemd
sudo mv -f /usr/sbin/slmodemd_backup /usr/sbin/slmodemd
sudo /etc/init.d/sl-modem-daemon restart

Obrigado.

clovix

Boa noite pessoal !!!

Mais alguém pode me ajudar ? Estou a dias tentando configurar mas não consigo ! E não quero usar o Win.
Sei que tem vários tópico, mas já tentei vários e até a documentação on-line e não deu certo.

Desculpe minha insistência

Obrigado.

clovix

Alarcon, será que você pode dar um help, já não sei a onde recorrer

Obrigado.

zekkerj

Jurava que tinha respondido aqui. Ou será que foi em outro caso de conexão discada??

clovix, você consegue discar com o wvdial? chega a ouvir os sons de discagem/conexão?

recebe alguma mensagem de erro ao tentar os procedimentos listados??
Pesquise antes de perguntar, sua dúvida pode já ter sido respondida.
Não respondo dúvidas por MP, coloque sua dúvida no fórum onde ela pode ser pesquisada pelos seus colegas!
Não venha ao fórum apenas para perguntar. Se você sabe a resposta de um problema, porque não ajudar seu colega? ;D

clovix

Boa tarde Zekkerj !!

Desculpa pela demora mas tive fora uns dias e também dei uma desanimada.
Já tentei pelo GNOME PPP (modem não encontrado) e pelo pon(Erro no script), mas não obtive sucesso.
Em alguns dos tutoriais ao instalar os pacotes dava erro em outros não.
Gostaria de saber se você pode me dar novas orientações(do zero), pois como já escrevi usei várias, e confesso que estou confuso.

Muito obrigado.

zekkerj

Eu tenho acompanhado outro tópico do alarcon, e parece que o driver de 64 bits dos modems HSP tá com problema.
Pesquise antes de perguntar, sua dúvida pode já ter sido respondida.
Não respondo dúvidas por MP, coloque sua dúvida no fórum onde ela pode ser pesquisada pelos seus colegas!
Não venha ao fórum apenas para perguntar. Se você sabe a resposta de um problema, porque não ajudar seu colega? ;D