Qrazercfg iniciar automaticamente -mouse Deathadder

[kaito57]

Eu consegui instalar o driver, mas toda vez que inicio o computador tenho escolher o dpi no programa (1800)... queria que isso fosse automático...

Eu segui o tutorial do link abaixo:
http://ubuntuforums.org/showthread.php?t=1578998&page=3

o que fiz foi o seguinte:
$ razercfg -s
retorna: Mouse:DeathAdder 3500DPI:USB-003:1532-0016-0

$ razercfg -d Mouse:DeathAdder 3500DPI:USB-003:1532-0016-0 -R
retorna: -h|--help            Print this help text
-v|--version         Print the program version number
-B|--background      Fork into the background
-s|--scan            Scan for devices and print the bus IDs
-K|--reconfigure     Force-reconfigure all detected devices

-d|--device DEV      Selects the device with the bus ID "DEV"
   Use the special value "mouse" for DEV to select
   the first razer mouse device found in the system.
   If this option is omitted, the first Razer device found is selected.

-S|--sleep SECS      Sleep SECS seconds.

Device operations (DEVOPS):
These options apply to the device that is specified with -d

Options for mice:
-V|--fwver               Print the firmware version number
-r|--res [profile:]DPI   Changes the scan resolution. profile is optional.
-R|--getres              Prints the resolutions
-f|--freq [profile:]FREQ Changes the scan frequency. profile is optional.
-F|--getfreq             Prints the frequencies
-L|--leds                Print the identifiers of the LEDs on the device
-l|--setled LED:off      Toggle the LED with the identifier "LED" ON or OFF
-X|--flashfw FILE        Flash a firmware image to the device