Como instalar wireless notebook presario C750br placa Wireless intel [resolvido]

[leocsum]

Olá Boa noite... sou completamente iniciante no Sistema linux... preciso de ajuda para ativar meu wireless ja tentei alguns tutoriais mais nenhum deu certo... coloquei o comando lspci e aparece o seguinte

leo-linux@leolinux-Presario-C700-Notebook-PC:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
01:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection (rev 61)
02:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
leo-linux@leolinux-Presario-C700-Notebook-PC:~$

Como faço para configurar esse Wireless e como faço para ligar o Wireless e ficar azul a luz indicando que esta ligado? Desde já Obrigado pela ajuda.

Ahhh detalhe meu Linux e o Ubuntu 10.10

[zekkerj]

Olá leocsum, execute os comandos abaixo e cole o resultado aqui.

sudo lshw -C network

iwconfig wlan0

ifconfig -a

nm-tool

[leocsum]

Oi Obrigado pela resposta aki vão as telas q foram aparecendo com esses comandos

leo-linux@leolinux-Presario-C700-Notebook-PC:~$ sudo lshw -C Network
[sudo] password for leo-linux:
PCI (sysfs) 
SCSI                     
  *-network DISABLED
       description: Wireless interface
       product: PRO/Wireless 4965 AG or AGN [Kedron] Network Connection
       vendor: Intel Corporation
       physical id: 0
       bus info: pci@0000:01:00.0
       logical name: wlan0
       version: 61
       serial: 00:1f:3b:08:cf:01
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless
       configuration: broadcast=yes driver=iwlagn driverversion=2.6.35-28-generic firmware=228.61.2.24 latency=0 link=yes multicast=yes wireless=IEEE 802.11abg
       resources: irq:43 memory:d1300000-d1301fff
  *-network
       description: Ethernet interface
       product: RTL-8139/8139C/8139C+
       vendor: Realtek Semiconductor Co., Ltd.
       physical id: 1
       bus info: pci@0000:02:01.0
       logical name: eth0
       version: 10
       serial: 00:1f:29:32:f8:db
       size: 100MB/s
       capacity: 100MB/s
       width: 32 bits
       clock: 33MHz
       capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=8139too driverversion=0.9.28 duplex=full ip=192.168.69.16 latency=64 link=yes maxlatency=64 mingnt=32 multicast=yes port=MII speed=100MB/s
       resources: irq:16 ioport:1000(size=256) memory:d1200000-d12000ff
  *-network DISABLED
       description: Ethernet interface
       physical id: 1
       logical name: vboxnet0
       serial: 0a:00:27:00:00:00
       capabilities: ethernet physical
       configuration: broadcast=yes multicast=yes
leo-linux@leolinux-Presario-C700-Notebook-PC:~$
leo-linux@leolinux-Presario-C700-Notebook-PC:~$
leo-linux@leolinux-Presario-C700-Notebook-PC:~$ lwconfig wlan0
No command 'lwconfig' found, did you mean:
Command 'iwconfig' from package 'wireless-tools' (main)
Command 'ldconfig' from package 'libc-bin' (main)
lwconfig: command not found
leo-linux@leolinux-Presario-C700-Notebook-PC:~$ iwconfig wlano
wlano     No such device

leo-linux@leolinux-Presario-C700-Notebook-PC:~$ iwconfig wlan0
wlan0     IEEE 802.11abg  ESSID:off/any 
          Mode:Managed  Access Point: Not-Associated   Tx-Power=off   
          Retry  long limit:7   RTS thr:off   Fragment thr:off
          Power Management:off
         
leo-linux@leolinux-Presario-C700-Notebook-PC:~$ ifconfig -a
eth0      Link encap:Ethernet  HWaddr 00:1f:29:32:f8:db 
          inet addr:192.168.69.16  Bcast:192.168.69.255  Mask:255.255.255.0
          inet6 addr: fe80::21f:29ff:fe32:f8db/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:126090 errors:0 dropped:0 overruns:0 frame:0
          TX packets:80603 errors:0 dropped:0 overruns:3 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:175097159 (175.0 MB)  TX bytes:7410683 (7.4 MB)
          Interrupt:16 Base address:0x1000

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:20 errors:0 dropped:0 overruns:0 frame:0
          TX packets:20 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:1160 (1.1 KB)  TX bytes:1160 (1.1 KB)

vboxnet0  Link encap:Ethernet  HWaddr 0a:00:27:00:00:00 
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

wlan0     Link encap:Ethernet  HWaddr 00:1f:3b:08:cf:01 
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

leo-linux@leolinux-Presario-C700-Notebook-PC:~$ nm-tool

NetworkManager Tool

State: connected

- Device: wlan0 ----------------------------------------------------------------
  Type:              802.11 WiFi
  Driver:            iwlagn
  State:             unavailable
  Default:           no
  HW Address:        00:1F:3B:08:CF:01

  Capabilities:

  Wireless Properties
    WEP Encryption:  yes
    WPA Encryption:  yes
    WPA2 Encryption: yes

  Wireless Access Points


- Device: eth0  [Auto eth0] ----------------------------------------------------
  Type:              Wired
  Driver:            8139too
  State:             connected
  Default:           yes
  HW Address:        00:1F:29:32:F8:DB

  Capabilities:
    Carrier Detect:  yes
    Speed:           100 Mb/s

  Wired Properties
    Carrier:         on

  IPv4 Settings:
    Address:         192.168.69.16
    Prefix:          24 (255.255.255.0)
    Gateway:         192.168.69.254

    DNS:             192.168.69.253


leo-linux@leolinux-Presario-C700-Notebook-PC:~$

[zekkerj]

leo-linux@leolinux-Presario-C700-Notebook-PC:~$ sudo lshw -C Network
[sudo] password for leo-linux:
(...)
  *-network DISABLED

Ligue o botão liga/desliga da rede wireless.

[leocsum]

Oi Zekkerj eu ja tentei ligar e ñ liga... aperto e ñ acende... tenho o windows 7 e o linux instalado aki no not.. um em cada partição e no win7 aperto ele liga funciona de boa o wireless mais aki no linux ele nem liga

[zekkerj]

Mantenha na posição "ligado", no Windows, e não mexa mais. Confirme a posição ligada pelo boot do windows.

Volte ao ubuntu, execute o comando abaixo e cole o resultado aqui.

lsmod | grep -i wmi

[leocsum]

Então.. não e uma chave q liga e desliga.. e um botão q só da para apertar e ligar o wireless se ja estiver feito o login no windows.. antes disso durante o boot ele ñ liga.. eu liguei o windows liguei o wireless e mandei reiniciar e ele desliga enquanto ta reiniciando... dei o comando q me pediu e aparece isso...

leo-linux@leolinux-Presario-C700-Notebook-PC:~$ lsmod | grep -i wmi
snd_rawmidi            17783  1 snd_seq_midi
snd_seq_device          5744  3 snd_seq_midi,snd_rawmidi,snd_seq
hp_wmi                  5223  0
snd                    49038  13 snd_hda_codec_conexant,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
leo-linux@leolinux-Presario-C700-Notebook-PC:~$ ^C
leo-linux@leolinux-Presario-C700-Notebook-PC:~$

[zekkerj]

Beleza, já tem mais ou menos o que eu quero.

Crie o arquivo "/etc/modprobe.d/blacklist-wmi.conf" com a linha abaixo:

blacklist hp_wmi

Depois reinicie o sistema. Veja se depois disso consegue conectar.

[leocsum]

leo-linux@leolinux-Presario-C700-Notebook-PC:~$ blacklist hp_wmi
blacklist: command not found

[zekkerj]

Eu pedi para você criar um arquivo com essa linha, não pra executar um comando.

[leocsum]

Olá perdão pela demora.. tive alguns problemas pessoais...

Então eu criei e fico assim

# This file lists those modules which we don't want to be loaded by
# alias expansion, usually so some other driver will be loaded for the
# device instead.

# evbug is a debug tool that should be loaded explicitly
blacklist evbug

# these drivers are very simple, the HID drivers are usually preferred
blacklist usbmouse
blacklist usbkbd

# replaced by e100
blacklist eepro100

# replaced by tulip
blacklist de4x5

# causes no end of confusion by creating unexpected network interfaces
blacklist eth1394

# snd_intel8x0m can interfere with snd_intel8x0, doesn't seem to support much
# hardware on its own (Ubuntu bug #2011, #6810)
blacklist snd_intel8x0m

# Conflicts with dvb driver (which is better for handling this device)
blacklist snd_aw2

# causes failure to suspend on HP compaq nc6000 (Ubuntu: #10306)
blacklist i2c_i801

# replaced by p54pci
blacklist prism54

# replaced by b43 and ssb.
blacklist bcm43xx

# most apps now use garmin usb driver directly (Ubuntu: #114565)
blacklist garmin_gps

# replaced by asus-laptop (Ubuntu: #184721)
blacklist asus_acpi

# low-quality, just noise when being used for sound playback, causes
# hangs at desktop session start (Ubuntu: #246969)
blacklist snd_pcsp

# ugly and loud noise, getting on everyone's nerves; this should be done by a
# nice pulseaudio bing (Ubuntu: #77010)
blacklist pcspkr

# EDAC driver for amd76x clashes with the agp driver preventing the aperture
# from being initialised (Ubuntu: #297750). Blacklist so that the driver
# continues to build and is installable for the few cases where its
# really needed.
blacklist amd76x_edac
blacklist hp_wmi
blacklist hp_wmi
blacklist hp_wmi


e mesmo assim não liga o wireless

[zekkerj]

Pode repetir os comandos de teste agora?

sudo lshw -C network

rfkill list wifi

[leocsum]

sim

leo-linux@leolinux-Presario-C700-Notebook-PC:~$ sudo lshw -C network
  *-network UNCLAIMED     
       description: Network controller
       product: PRO/Wireless 4965 AG or AGN [Kedron] Network Connection
       vendor: Intel Corporation
       physical id: 0
       bus info: pci@0000:01:00.0
       version: 61
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress bus_master cap_list
       configuration: latency=0
       resources: memory:d1300000-d1301fff
  *-network
       description: Ethernet interface
       product: RTL-8139/8139C/8139C+
       vendor: Realtek Semiconductor Co., Ltd.
       physical id: 1
       bus info: pci@0000:02:01.0
       logical name: eth0
       version: 10
       serial: 00:1f:29:32:f8:db
       size: 100MB/s
       capacity: 100MB/s
       width: 32 bits
       clock: 33MHz
       capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=8139too driverversion=0.9.28 duplex=full ip=192.168.69.16 latency=64 link=yes maxlatency=64 mingnt=32 multicast=yes port=MII speed=100MB/s
       resources: irq:16 ioport:1000(size=256) memory:d1200000-d12000ff
  *-network DISABLED
       description: Ethernet interface
       physical id: 1
       logical name: vboxnet0
       serial: 0a:00:27:00:00:00
       capabilities: ethernet physical
       configuration: broadcast=yes multicast=yes
leo-linux@leolinux-Presario-C700-Notebook-PC:~$ rfkill list wifi
leo-linux@leolinux-Presario-C700-Notebook-PC:~$

[zekkerj]

Execute o comando abaixo, depois teste sua conexão sem reiniciar ou fechar sua sessão.

sudo modprobe iwlagn

[leocsum]

ebaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa funcionouuuuuuuuuuuuuuuuuuuuuuuuuuu obrigadoooooooooooooooooo valeu mesmoooooooooooo nossa q ajuda... muito obrigado!!!