Qual o melhor ubuntu pro meu computador ?

Arthemyz · 15 de Janeiro de 2011, 03:06

Nao to sabendo escolher a melhor versao do ubuntu pro meu pc to tendo problemas pra instalar ubuntu restricted extras agora to com erro no synaptic : E: dpkg foi interrompido. Você deve executar o comando 'sudo dpkg --configure -a' para corrigir o problema.
E: _cache->open() failed, please report. Eu uso o ubuntu Linux artemys-desktop 2.6.32-27-generic #49-Ubuntu SMP Wed Dec 1 23:52:12 UTC 2010 i686 GNU/Linux
artemys@artemys-desktop:~$ cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=10.04
DISTRIB_CODENAME=lucid
DISTRIB_DESCRIPTION="Ubuntu 10.04.1 LTS Eu usei ums comandos pra tentar descobri a configuracao do meu pc e postar aqui pra vcs mi ajudarem a escolher a melhor versao do ubuntu pra esse pc : Comando dmesg resultado : [ 0.111710] pci 0000:00:01.0: bridge 32bit mmio: [0xec000000-0xec0fffff]
[ 0.111716] pci 0000:00:01.0: bridge 32bit mmio pref: [0xe0000000-0xe7ffffff]
[ 0.111726] pci_bus 0000:00: on NUMA node 0
[ 0.111733] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.137725] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.137861] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.137994] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.138126] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.138258] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.138390] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.138531] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.138667] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.138839] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.138843] vgaarb: loaded
[ 0.139031] SCSI subsystem initialized
[ 0.139154] libata version 3.00 loaded.
[ 0.139260] usbcore: registered new interface driver usbfs
[ 0.139283] usbcore: registered new interface driver hub
[ 0.139319] usbcore: registered new device driver usb
[ 0.139507] ACPI: WMI: Mapper loaded
[ 0.139510] PCI: Using ACPI for IRQ routing
[ 0.139714] NetLabel: Initializing
[ 0.139717] NetLabel: domain hash size = 128
[ 0.139719] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.139741] NetLabel: unlabeled traffic allowed by default
[ 0.139806] Switching to clocksource tsc
[ 0.139996] AppArmor: AppArmor Filesystem Enabled
[ 0.139996] pnp: PnP ACPI init
[ 0.139996] ACPI: bus type pnp registered
[ 0.142597] pnp: PnP ACPI: found 13 devices
[ 0.142600] ACPI: ACPI bus type pnp unregistered
[ 0.142607] PnPBIOS: Disabled by ACPI PNP
[ 0.142626] system 00:00: iomem range 0xc8000-0xcbfff has been reserved
[ 0.142631] system 00:00: iomem range 0xf0000-0xf7fff could not be reserved
[ 0.142634] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.142637] system 00:00: iomem range 0xfc000-0xfffff could not be reserved
[ 0.142641] system 00:00: iomem range 0x1dff0000-0x1dffffff could not be reserved
[ 0.142645] system 00:00: iomem range 0xffff0000-0xffffffff has been reserved
[ 0.142648] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.142652] system 00:00: iomem range 0x100000-0x1dfeffff could not be reserved
[ 0.142655] system 00:00: iomem range 0xffee0000-0xffefffff has been reserved
[ 0.142659] system 00:00: iomem range 0xfffe0000-0xfffeffff has been reserved
[ 0.142662] system 00:00: iomem range 0xfec00000-0xfecfffff could not be reserved
[ 0.142666] system 00:00: iomem range 0xfee00000-0xfeefffff has been reserved
[ 0.142676] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.142680] system 00:02: ioport range 0x800-0x805 has been reserved
[ 0.142683] system 00:02: ioport range 0x290-0x297 has been reserved
[ 0.142686] system 00:02: ioport range 0x880-0x881 has been reserved
[ 0.142689] system 00:02: ioport range 0x882-0x891 has been reserved
[ 0.177480] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.177485] pci 0000:00:01.0: IO window: 0xc000-0xcfff
[ 0.177493] pci 0000:00:01.0: MEM window: 0xec000000-0xec0fffff
[ 0.177498] pci 0000:00:01.0: PREFETCH window: 0xe0000000-0xe7ffffff
[ 0.177519] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.177523] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.177526] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff]
[ 0.177529] pci_bus 0000:01: resource 1 mem: [0xec000000-0xec0fffff]
[ 0.177532] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xe7ffffff]
[ 0.177590] NET: Registered protocol family 2
[ 0.177732] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.178076] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.178199] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.178318] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.178321] TCP reno registered
[ 0.178443] NET: Registered protocol family 1
[ 1.780015] pci 0000:00:03.3: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 1.780047] pci 0000:01:00.0: Boot video device
[ 1.780296] cpufreq-nforce2: No nForce2 chipset.
[ 1.780337] Scanning for low memory corruption every 60 seconds
[ 1.780482] audit: initializing netlink socket (disabled)
[ 1.780500] type=2000 audit(1295064259.780:1): initialized
[ 1.789288] Trying to unpack rootfs image as initramfs...
[ 1.800488] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.802192] VFS: Disk quotas dquot_6.5.2
[ 1.802273] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.808400] fuse init (API version 7.13)
[ 1.808574] msgmni has been set to 914
[ 1.808938] alg: No test for stdrng (krng)
[ 1.809029] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.809033] io scheduler noop registered
[ 1.809035] io scheduler anticipatory registered
[ 1.809038] io scheduler deadline registered
[ 1.809092] io scheduler cfq registered (default)
[ 1.809240] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.809272] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.809408] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.809414] ACPI: Power Button [PWRB]
[ 1.809482] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.809485] ACPI: Power Button [PWRF]
[ 1.809544] fan PNP0C0B:00: registered as cooling_device0
[ 1.809556] ACPI: Fan [FAN] (on)
[ 1.809854] processor LNXCPU:00: registered as cooling_device1
[ 1.813019] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.813029] ACPI: Thermal Zone [THRM] (9 C)
[ 1.817983] isapnp: Scanning for PnP cards...
[ 1.823771] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.823894] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.824036] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.824464] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.824617] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.824756] alloc irq_desc for 18 on node -1
[ 1.824759] alloc kstat_irqs on node -1
[ 1.824771] serial 0000:00:09.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.824912] 0000:00:09.0: ttyS2 at I/O 0xd808 (irq = 18) is a 16450
[ 1.824996] 0000:00:09.0: ttyS3 at I/O 0xd810 (irq = 18) is a 8250
[ 1.825025] Couldn't register serial port 0000:00:09.0: -28
[ 1.826250] brd: module loaded
[ 1.826838] loop: module loaded
[ 1.826980] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 1.827169] pata_sis 0000:00:02.5: version 0.5.2
[ 1.827200] alloc irq_desc for 16 on node -1
[ 1.827203] alloc kstat_irqs on node -1
[ 1.827214] pata_sis 0000:00:02.5: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.832083] scsi0 : pata_sis
[ 1.875858] scsi1 : pata_sis
[ 1.876951] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x4000 irq 14
[ 1.876955] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x4008 irq 15
[ 1.877067] alloc irq_desc for 17 on node -1
[ 1.877071] alloc kstat_irqs on node -1
[ 1.877082] pata_acpi 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.877158] pata_acpi 0000:00:05.0: PCI INT A disabled
[ 1.877575] Fixed MDIO Bus: probed
[ 1.877624] PPP generic driver version 2.4.2
[ 1.877734] tun: Universal TUN/TAP device driver, 1.6
[ 1.877737] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.877870] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.877900] alloc irq_desc for 23 on node -1
[ 1.877903] alloc kstat_irqs on node -1
[ 1.877910] ehci_hcd 0000:00:03.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 1.877937] ehci_hcd 0000:00:03.3: EHCI Host Controller
[ 1.877993] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
[ 1.878042] ehci_hcd 0000:00:03.3: cache line size of 128 is not supported
[ 1.878064] ehci_hcd 0000:00:03.3: irq 23, io mem 0xec122000
[ 1.888193] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00
[ 1.888390] usb usb1: configuration #1 chosen from 1 choice
[ 1.888431] hub 1-0:1.0: USB hub found
[ 1.888453] hub 1-0:1.0: 8 ports detected
[ 1.888545] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.888586] alloc irq_desc for 20 on node -1
[ 1.888589] alloc kstat_irqs on node -1
[ 1.888601] ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.888630] ohci_hcd 0000:00:03.0: OHCI Host Controller
[ 1.888695] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
[ 1.888729] ohci_hcd 0000:00:03.0: irq 20, io mem 0xec125000
[ 1.970124] usb usb2: configuration #1 chosen from 1 choice
[ 1.970172] hub 2-0:1.0: USB hub found
[ 1.970191] hub 2-0:1.0: 3 ports detected
[ 1.970268] alloc irq_desc for 21 on node -1
[ 1.970271] alloc kstat_irqs on node -1
[ 1.970283] ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.970312] ohci_hcd 0000:00:03.1: OHCI Host Controller
[ 1.970370] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
[ 1.970405] ohci_hcd 0000:00:03.1: irq 21, io mem 0xec120000
[ 2.057981] usb usb3: configuration #1 chosen from 1 choice
[ 2.058032] hub 3-0:1.0: USB hub found
[ 2.058051] hub 3-0:1.0: 3 ports detected
[ 2.058130] alloc irq_desc for 22 on node -1
[ 2.058133] alloc kstat_irqs on node -1
[ 2.058146] ohci_hcd 0000:00:03.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 2.058179] ohci_hcd 0000:00:03.2: OHCI Host Controller
[ 2.058243] ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4
[ 2.058275] ohci_hcd 0000:00:03.2: irq 22, io mem 0xec121000
[ 2.072581] ata1.00: ATAPI: IDE/ATAPI CD-ROM 60XS, 206G, max UDMA/33
[ 2.072629] ata1.01: ATAPI: HL-DT-ST DVDRAM GSA-4167B, DL10, max UDMA/33
[ 2.088689] ata1.00: configured for UDMA/33
[ 2.104414] ata1.01: configured for UDMA/33
[ 2.150327] usb usb4: configuration #1 chosen from 1 choice
[ 2.150370] hub 4-0:1.0: USB hub found
[ 2.150388] hub 4-0:1.0: 2 ports detected
[ 2.150462] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.150611] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.150991] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.151002] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.151303] mice: PS/2 mouse device common for all mice
[ 2.151541] rtc_cmos 00:04: RTC can wake from S4
[ 2.151598] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 2.151625] rtc0: alarms up to one year, 242 bytes nvram
[ 2.151779] device-mapper: uevent: version 1.0.3
[ 2.154102] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 2.155913] device-mapper: multipath: version 1.1.0 loaded
[ 2.155920] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.158615] EISA: Probing bus 0 at eisa.0
[ 2.158626] Cannot allocate resource for EISA slot 1
[ 2.158636] Cannot allocate resource for EISA slot 4
[ 2.158653] EISA: Detected 0 cards.
[ 2.158767] cpuidle: using governor ladder
[ 2.158770] cpuidle: using governor menu
[ 2.159318] TCP cubic registered
[ 2.159475] NET: Registered protocol family 10
[ 2.160104] lo: Disabled Privacy Extensions
[ 2.160482] NET: Registered protocol family 17
[ 2.160577] Using IPI No-Shortcut mode
[ 2.160731] PM: Resume from disk failed.
[ 2.160757] registered taskstats version 1
[ 2.161003] Magic number: 11:30:60
[ 2.161121] rtc_cmos 00:04: setting system clock to 2011-01-15 04:04:20 UTC (1295064260)
[ 2.161125] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.161127] EDD information not available.
[ 2.169827] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 2.342227] Freeing initrd memory: 7783k freed
[ 2.440711] isapnp: No Plug & Play device found
[ 2.441191] scsi 0:0:0:0: CD-ROM ATAPI CD-ROM 60X 206G PQ: 0 ANSI: 5
[ 2.444914] sr0: scsi3-mmc drive: 52x/50x cd/rw xa/form2 cdda tray
[ 2.444920] Uniform CD-ROM driver Revision: 3.20
[ 2.445083] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 2.445181] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 2.448968] scsi 0:0:1:0: CD-ROM HL-DT-ST DVDRAM GSA-4167B DL10 PQ: 0 ANSI: 5
[ 2.460742] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.460876] sr 0:0:1:0: Attached scsi CD-ROM sr1
[ 2.460949] sr 0:0:1:0: Attached scsi generic sg1 type 5
[ 2.616087] Freeing unused kernel memory: 656k freed
[ 2.617030] Write protecting the kernel text: 4684k
[ 2.617060] Write protecting the kernel read-only data: 1840k
[ 2.647157] udev: starting version 151
[ 2.914379] Floppy drive(s): fd0 is 1.44M
[ 2.918164] sata_sis 0000:00:05.0: version 1.0
[ 2.918191] sata_sis 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.918198] sata_sis 0000:00:05.0: Detected SiS 180/181/964 chipset in SATA mode
[ 2.935277] scsi2 : sata_sis
[ 2.938518] FDC 0 is a post-1991 82077
[ 2.941143] scsi3 : sata_sis
[ 2.941861] ata3: SATA max UDMA/133 cmd 0xdc00 ctl 0xdd00 bmdma 0xe000 irq 17
[ 2.941868] ata4: SATA max UDMA/133 cmd 0xde00 ctl 0xdf00 bmdma 0xe008 irq 17
[ 2.948554] sis900.c: v1.08.10 Apr. 2 2006
[ 2.948626] alloc irq_desc for 19 on node -1
[ 2.948630] alloc kstat_irqs on node -1
[ 2.948641] sis900 0000:00:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.949760] 0000:00:04.0: SiS 900 on Foxconn 661 7MI transceiver found at address 1.
[ 2.960971] 0000:00:04.0: Using transceiver found at address 1 as default
[ 2.964763] eth0: SiS 900 PCI Fast Ethernet at 0xd400, IRQ 19, 00:15:58:b6:64:2a
[ 3.260054] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 3F0)
[ 3.318154] ata3.00: ATA-7: ST340211AS, 3.AAE, max UDMA/133
[ 3.318159] ata3.00: 78165360 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 3.384800] ata3.00: configured for UDMA/133
[ 3.384976] scsi 2:0:0:0: Direct-Access ATA ST340211AS 3.a PQ: 0 ANSI: 5
[ 3.385240] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 3.385654] sd 2:0:0:0: [sda] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB)
[ 3.385724] sd 2:0:0:0: [sda] Write Protect is off
[ 3.385727] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.385761] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.385991] sda: sda1 sda2 < sda5 sda6 >
[ 3.465191] sd 2:0:0:0: [sda] Attached SCSI disk
[ 3.714803] ata4: SATA link down (SStatus 0 SControl 3F0)
[ 4.181310] kjournald starting. Commit interval 5 seconds
[ 4.181327] EXT3-fs: mounted filesystem with ordered data mode.
[ 15.373706] udev: starting version 151
[ 15.488259] Adding 1971192k swap on /dev/sda6. Priority:-1 extents:1 across:1971192k
[ 15.518657] lp: driver loaded but no devices found
[ 15.702456] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 15.708108] Linux agpgart interface v0.103
[ 15.797583] parport_pc 00:0a: reported by Plug and Play ACPI
[ 15.797633] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 15.812742] agpgart-sis 0000:00:00.0: SiS chipset [1039/0661]
[ 15.884377] lp0: using parport0 (interrupt-driven).
[ 15.942494] psmouse serio1: ID: 10 00 64
[ 15.976703] agpgart-sis 0000:00:00.0: AGP aperture is 64M @ 0xe8000000
[ 16.049716] vga16fb: initializing
[ 16.049724] vga16fb: mapped to 0xc00a0000
[ 16.049875] fb0: VGA16 VGA frame buffer device
[ 16.090470] type=1505 audit(1295064274.426:2): operation="profile_load" pid=485 name="/sbin/dhclient3"
[ 16.091200] type=1505 audit(1295064274.426:3): operation="profile_load" pid=485 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 16.091608] type=1505 audit(1295064274.426:4): operation="profile_load" pid=485 name="/usr/lib/connman/scripts/dhclient-script"
[ 16.128875] ppdev: user-space parallel port driver
[ 16.208834] EXT3 FS on sda1, internal journal
[ 16.410642] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[ 16.584273] ata3.00: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6
[ 16.584281] ata3.00: failed command: SET FEATURES
[ 16.584289] ata3.00: cmd ef/05:fe:00:00:00/00:00:00:00:00/40 tag 0
[ 16.584290] res 51/04:fe:00:00:00/00:00:00:00:00/40 Emask 0x1 (device error)
[ 16.584293] ata3.00: status: { DRDY ERR }
[ 16.584296] ata3.00: error: { ABRT }
[ 16.584307] ata3: hard resetting link
[ 16.620074] Console: switching to colour frame buffer device 80x30
[ 16.631331] Intel ICH 0000:00:02.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 16.908058] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 3F0)
[ 16.952042] intel8x0_measure_ac97_clock: measured 54767 usecs (2635 samples)
[ 16.952046] intel8x0: clocking to 48000
[ 17.027353] ata3.00: configured for UDMA/133
[ 17.027392] ata3: EH complete
[ 17.198631] EXT4-fs (sda5): mounted filesystem with ordered data mode
[ 17.791724] type=1505 audit(1295064276.126:5): operation="profile_load" pid=743 name="/usr/share/gdm/guest-session/Xsession"
[ 17.823295] type=1505 audit(1295064276.158:6): operation="profile_replace" pid=751 name="/sbin/dhclient3"
[ 17.851360] type=1505 audit(1295064276.186:7): operation="profile_replace" pid=751 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 17.851801] type=1505 audit(1295064276.186:

: operation="profile_replace" pid=751 name="/usr/lib/connman/scripts/dhclient-script"
[ 17.931049] type=1505 audit(1295064276.266:9): operation="profile_load" pid=762 name="/usr/bin/evince"
[ 18.002784] type=1505 audit(1295064276.338:10): operation="profile_load" pid=762 name="/usr/bin/evince-previewer"
[ 18.052425] type=1505 audit(1295064276.390:11): operation="profile_load" pid=762 name="/usr/bin/evince-thumbnailer"

Arthemyz · 15 de Janeiro de 2011, 03:07

[ 19.616728] eth0: Media Link On 100mbps full-duplex
[ 21.556852] serial8250: too much work for irq18
[ 21.581654] serial8250: too much work for irq18
[ 21.727460] serial8250: too much work for irq18
[ 21.752330] serial8250: too much work for irq18
[ 21.898074] serial8250: too much work for irq18
[ 21.922906] serial8250: too much work for irq18
[ 22.068753] serial8250: too much work for irq18
[ 22.093537] serial8250: too much work for irq18
[ 22.239330] serial8250: too much work for irq18
[ 22.264217] serial8250: too much work for irq18
[ 22.409973] serial8250: too much work for irq18
[ 22.434805] serial8250: too much work for irq18
[ 22.580613] serial8250: too much work for irq18
[ 22.605441] serial8250: too much work for irq18
[ 22.751251] serial8250: too much work for irq18
[ 22.776072] serial8250: too much work for irq18
[ 22.921837] serial8250: too much work for irq18
[ 22.946665] serial8250: too much work for irq18
[ 23.092512] serial8250: too much work for irq18
[ 23.117335] serial8250: too much work for irq18
[ 23.263105] serial8250: too much work for irq18
[ 23.287911] serial8250: too much work for irq18
[ 23.433736] serial8250: too much work for irq18
[ 23.458541] serial8250: too much work for irq18
[ 23.604337] serial8250: too much work for irq18
[ 23.629167] serial8250: too much work for irq18
[ 23.774969] serial8250: too much work for irq18
[ 23.799791] serial8250: too much work for irq18
[ 23.945592] serial8250: too much work for irq18
[ 23.970413] serial8250: too much work for irq18
[ 24.116223] serial8250: too much work for irq18
[ 24.141050] serial8250: too much work for irq18
[ 24.286844] serial8250: too much work for irq18
[ 24.311678] serial8250: too much work for irq18
[ 24.457474] serial8250: too much work for irq18
[ 24.482304] serial8250: too much work for irq18
[ 24.628091] serial8250: too much work for irq18
[ 24.652919] serial8250: too much work for irq18
[ 24.798735] serial8250: too much work for irq18
[ 24.823556] serial8250: too much work for irq18
[ 24.969344] serial8250: too much work for irq18
[ 24.994177] serial8250: too much work for irq18
[ 25.139979] serial8250: too much work for irq18
[ 25.164803] serial8250: too much work for irq18
[ 25.310602] serial8250: too much work for irq18
[ 25.335425] serial8250: too much work for irq18
[ 25.481232] serial8250: too much work for irq18
[ 25.506060] serial8250: too much work for irq18
[ 25.651852] serial8250: too much work for irq18
[ 25.676675] serial8250: too much work for irq18
[ 25.822485] serial8250: too much work for irq18
[ 25.847309] serial8250: too much work for irq18
[ 25.993102] serial8250: too much work for irq18
[ 26.017930] serial8250: too much work for irq18
[ 26.163749] serial8250: too much work for irq18
[ 26.188561] serial8250: too much work for irq18
[ 26.334355] serial8250: too much work for irq18
[ 26.359188] serial8250: too much work for irq18
[ 26.504990] serial8250: too much work for irq18
[ 26.675615] serial8250: too much work for irq18
[ 26.846251] serial8250: too much work for irq18
[ 27.016870] serial8250: too much work for irq18
[ 27.187495] serial8250: too much work for irq18
[ 27.358111] serial8250: too much work for irq18
[ 28.584012] eth0: no IPv6 routers present
[ 41.252681] serial8250: too much work for irq18
[ 41.417256] serial8250: too much work for irq18
[ 41.423290] serial8250: too much work for irq18
[ 41.587880] serial8250: too much work for irq18
[ 41.593910] serial8250: too much work for irq18
[ 41.758501] serial8250: too much work for irq18
[ 41.764600] serial8250: too much work for irq18
[ 41.929167] serial8250: too much work for irq18
[ 41.935161] serial8250: too much work for irq18
[ 42.099761] serial8250: too much work for irq18
[ 42.105797] serial8250: too much work for irq18
[ 42.270403] serial8250: too much work for irq18
[ 42.276452] serial8250: too much work for irq18
[ 42.441036] serial8250: too much work for irq18
[ 42.447050] serial8250: too much work for irq18
[ 42.611640] serial8250: too much work for irq18
[ 42.617678] serial8250: too much work for irq18
[ 42.782257] serial8250: too much work for irq18
[ 42.788342] serial8250: too much work for irq18
[ 42.952921] serial8250: too much work for irq18
[ 42.958910] serial8250: too much work for irq18
[ 43.123507] serial8250: too much work for irq18
[ 43.129557] serial8250: too much work for irq18
[ 43.294142] serial8250: too much work for irq18
[ 43.300210] serial8250: too much work for irq18
[ 43.464778] serial8250: too much work for irq18
[ 43.470825] serial8250: too much work for irq18
[ 43.635414] serial8250: too much work for irq18
[ 43.641457] serial8250: too much work for irq18
[ 43.806016] serial8250: too much work for irq18
[ 43.812102] serial8250: too much work for irq18
[ 43.976676] serial8250: too much work for irq18
[ 43.982681] serial8250: too much work for irq18
[ 44.147268] serial8250: too much work for irq18
[ 44.153352] serial8250: too much work for irq18
[ 44.317911] serial8250: too much work for irq18
[ 44.323929] serial8250: too much work for irq18
[ 44.488524] serial8250: too much work for irq18
[ 44.494557] serial8250: too much work for irq18
[ 44.659152] serial8250: too much work for irq18
[ 44.665205] serial8250: too much work for irq18
[ 44.829766] serial8250: too much work for irq18
[ 44.835819] serial8250: too much work for irq18
[ 45.000443] serial8250: too much work for irq18
[ 45.006446] serial8250: too much work for irq18
[ 45.171026] serial8250: too much work for irq18
[ 45.177096] serial8250: too much work for irq18
[ 45.341671] serial8250: too much work for irq18
[ 45.347701] serial8250: too much work for irq18
[ 45.512309] serial8250: too much work for irq18
[ 45.518328] serial8250: too much work for irq18
[ 45.682908] serial8250: too much work for irq18
[ 45.688973] serial8250: too much work for irq18
[ 45.853532] serial8250: too much work for irq18
[ 45.859579] serial8250: too much work for irq18
[ 46.024166] serial8250: too much work for irq18
[ 46.030190] serial8250: too much work for irq18
[ 46.194789] serial8250: too much work for irq18
[ 46.200822] serial8250: too much work for irq18
[ 46.371451] serial8250: too much work for irq18
[ 46.542078] serial8250: too much work for irq18
[ 46.712701] serial8250: too much work for irq18
[ 46.883328] serial8250: too much work for irq18
[ 47.053958] serial8250: too much work for irq18
[ 47.224582] serial8250: too much work for irq18
[ 47.395209] serial8250: too much work for irq18
[ 47.565844] serial8250: too much work for irq18
[ 47.736455] serial8250: too much work for irq18
[ 47.907095] serial8250: too much work for irq18
[ 48.077705] serial8250: too much work for irq18
[ 48.248379] serial8250: too much work for irq18
[ 48.418973] serial8250: too much work for irq18
[ 48.589598] serial8250: too much work for irq18
[ 48.760218] serial8250: too much work for irq18
[ 48.930856] serial8250: too much work for irq18
[ 49.101461] serial8250: too much work for irq18
[ 49.272110] serial8250: too much work for irq18
[ 49.442725] serial8250: too much work for irq18
[ 49.613371] serial8250: too much work for irq18
[ 49.783980] serial8250: too much work for irq18
[ 49.954625] serial8250: too much work for irq18
[ 50.125228] serial8250: too much work for irq18
[ 50.295860] serial8250: too much work for irq18
[ 50.466488] serial8250: too much work for irq18
[ 50.637118] serial8250: too much work for irq18
[ 50.807738] serial8250: too much work for irq18
[ 50.978379] serial8250: too much work for irq18
[ 51.149001] serial8250: too much work for irq18
[ 51.319635] serial8250: too much work for irq18
[ 51.490251] serial8250: too much work for irq18
[ 51.660890] serial8250: too much work for irq18
[ 51.831493] serial8250: too much work for irq18
[ 52.002126] serial8250: too much work for irq18
[ 52.172745] serial8250: too much work for irq18
[ 52.343390] serial8250: too much work for irq18
[ 52.514006] serial8250: too much work for irq18
[ 52.684642] serial8250: too much work for irq18
[ 52.855252] serial8250: too much work for irq18
[ 53.025896] serial8250: too much work for irq18
[ 53.196514] serial8250: too much work for irq18
[ 53.367153] serial8250: too much work for irq18
[ 53.537767] serial8250: too much work for irq18
[ 53.708396] serial8250: too much work for irq18
[ 53.879027] serial8250: too much work for irq18
[ 54.049644] serial8250: too much work for irq18
[ 54.220264] serial8250: too much work for irq18
[ 54.390901] serial8250: too much work for irq18
[ 83.133054] NET: Registered protocol family 24
[ 83.954797] ip_tables: (C) 2000-2006 Netfilter Core Team
artemys@artemys-desktop:~$ cat /proc/cpuinfo

Arthemyz · 15 de Janeiro de 2011, 03:08

artemys@artemys-desktop:~$ cat /proc/cpuinfo
processor   : 0
vendor_id   : GenuineIntel
cpu family   : 15
model      : 6
model name   : Intel(R) Celeron(R) D CPU 3.06GHz
stepping   : 5
cpu MHz      : 3067.056
cache size   : 512 KB
fdiv_bug   : no
hlt_bug      : no
f00f_bug   : no
coma_bug   : no
fpu      : yes
fpu_exception   : yes
cpuid level   : 6
wp      : yes
flags      : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc up pebs bts pni dtes64 monitor ds_cpl cid cx16 xtpr pdcm lahf_lm
bogomips   : 6134.11
clflush size   : 64
cache_alignment   : 128
address sizes   : 36 bits physical, 48 bits virtual
power management:

Falco90 · 15 de Janeiro de 2011, 05:43

Citação de: Arthemyz online 15 de Janeiro de 2011, 03:06
Nao to sabendo escolher a melhor versao do ubuntu pro meu pc to tendo problemas pra instalar ubuntu restricted extras agora to com erro no synaptic : E: dpkg foi interrompido. Você deve executar o comando 'sudo dpkg --configure -a' para corrigir o problema.
E: _cache->open() failed, please report.

No painel de cima, clique no menu Aplicativos > Acessórios > Terminal para abrir a janela onde você deve colar o comando(sem as aspas).

Holmes · 15 de Janeiro de 2011, 21:02

oi Arthemyz, teste todos via live-cd............ai vc pode tomar uma decisão.....

vlw fwi, Viva

clodoaldops · 15 de Janeiro de 2011, 21:51

Use o ubuntu 10.10... Baixe a iso do site oficial... Grave em 4x ou 8x no maximo... Teste o live-cd antes de instalar... Tenho maverick rodando num desktop generico, num note dell e num note itautec sem problemas.

Qual o melhor ubuntu pro meu computador ?

Arthemyz

Arthemyz

Arthemyz

Falco90

Holmes

clodoaldops