Interfaces de rede não reiniciam

[bruno_moita]

Bom dia,

   Estou com um leve problema nas minas placas de rede, elas sobm OK quando reinicio o comutador, mas quando uso o comando /etc/init.d/networking restart só a placa eth1 sobe:

   Abaixo meu arquivo /etc/network/interfaces:

# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
# LAN
#allow-hotplug eth0
iface eth0 inet manual
        address 192.168.1.1
        netmask 255.255.255.0
        gateway 192.168.1.1
        broadcast 192.168.1.255
        network 192.168.1.0
        dns-nameservers 127.0.0.1 200.146.35.35 200.146.36.36


# WAN GVT
#allow-hotplug eth1
#iface eth1 inet dhcp

# WAN EMBRATEL
#allow-hotplug eth2
iface eth2 inet manual
        address 189.55.62.244
        netmask 255.255.255.248
        gateway 189.55.62.241
        broadcast 189.55.62.240
        network 189.55.62.247
        dns-nameservers 127.0.0.1 200.255.255.66 200.255.255.70

auto dsl-provider
iface dsl-provider inet ppp
pre-up /sbin/ifconfig eth1 up # line maintained by pppoeconf
provider dsl-provider

auto eth1
iface eth1 inet manual

[bruno_moita]

Resolvido, descomentei as linhas de allow-hotplug, e substitui o allow-hotplug por auto.