Problemas com Resolução 1024 x 600 (Proview PC 81001)

Iniciado por kleberguedes, 28 de Outubro de 2009, 00:16

tópico anterior - próximo tópico
Imprimir
Ir para o fim Páginas1
Ações

kleberguedes

28 de Outubro de 2009, 00:16
Olá a todos, pessoal a pouco tempo adquiri um Netbook Proview PC-81001 e percebi que estou tendo problemas com a resolução 1024 x 768, entrei no site do fabricante e descobri que a resolução adequada para este note é de 1024 x 600. Gostaria de saber como posso resolver este problema? Segue abaixo algumas informações sobre a minha máquina.


Ubuntu 9.04 32 bits
Kernel = 2.6.28-16-generic

lspci
00:01.0 Host bridge: Advanced Micro Devices [AMD] CS5536 [Geode companion] Host Bridge (rev 33)
00:01.1 VGA compatible controller: Advanced Micro Devices [AMD] Geode LX Video
00:01.2 Entertainment encryption device: Advanced Micro Devices [AMD] Geode LX AES Security Block
00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
00:0e.0 CardBus bridge: Texas Instruments PCI1510 PC card Cardbus Controller
00:0f.0 ISA bridge: Advanced Micro Devices [AMD] CS5536 [Geode companion] ISA (rev 03)
00:0f.2 IDE interface: Advanced Micro Devices [AMD] CS5536 [Geode companion] IDE (rev 01)
00:0f.3 Multimedia audio controller: Advanced Micro Devices [AMD] CS5536 [Geode companion] Audio (rev 01)
00:0f.4 USB Controller: Advanced Micro Devices [AMD] CS5536 [Geode companion] OHC (rev 02)
00:0f.5 USB Controller: Advanced Micro Devices [AMD] CS5536 [Geode companion] EHC (rev 02)


hwinfo -monitor
Model: "System"
  Formfactor: "unknown"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

03: None 00.0: 10104 FPU
  [Created at misc.192]
  Unique ID: rdCR.EMpH5pjcahD
  Hardware Class: unknown
  Model: "FPU"
  I/O Ports: 0xf0-0xff (rw)
  Config Status: cfg=new, avail=yes, need=no, active=unknown

04: None 00.0: 0801 DMA controller (8237)
  [Created at misc.206]
  Unique ID: rdCR.f5u1ucRm+H9
  Hardware Class: unknown
  Model: "DMA controller"
  I/O Ports: 0x00-0x1f (rw)
  I/O Ports: 0xc0-0xdf (rw)
  I/O Ports: 0x80-0x8f (rw)
  DMA: 4
  Config Status: cfg=new, avail=yes, need=no, active=unknown

05: None 00.0: 0800 PIC (8259)
  [Created at misc.219]
  Unique ID: rdCR.8uRK7LxiIA2
  Hardware Class: unknown
  Model: "PIC"
  I/O Ports: 0x20-0x21 (rw)
  I/O Ports: 0xa0-0xa1 (rw)
  IRQ: 2 (no events)
  Config Status: cfg=new, avail=yes, need=no, active=unknown

06: None 00.0: 0802 Timer (8254)
  [Created at misc.230]
  Unique ID: rdCR.AJKleuxpiP0
  Hardware Class: unknown
  Model: "Timer"
  IRQ: 0 (347280 events)
  Config Status: cfg=new, avail=yes, need=no, active=unknown

07: None 00.0: 0900 Keyboard controller
  [Created at misc.251]
  Unique ID: rdCR.9N+EecqykME
  Hardware Class: unknown
  Model: "Keyboard controller"
  I/O Port: 0x60 (rw)
  I/O Port: 0x64 (rw)
  Config Status: cfg=new, avail=yes, need=no, active=unknown

09: None 00.0: 10102 Main Memory
  [Created at memory.61]
  Unique ID: rdCR.CxwsZFjVASF
  Hardware Class: memory
  Model: "Main Memory"
  Memory Range: 0x00000000-0x1e7affff (rw)
  Memory Size: 488 MB
  Config Status: cfg=new, avail=yes, need=no, active=unknown

10: PCI 0f.5: 0c03 USB Controller (EHCI)
  [Created at pci.314]
  UDI: /org/freedesktop/Hal/devices/pci_1022_2095
  Unique ID: Jes5.ZNl012BuTB8
  SysFS ID: /devices/pci0000:00/0000:00:0f.5
  SysFS BusID: 0000:00:0f.5
  Hardware Class: usb controller
  Model: "AMD CS5536 [Geode companion] EHC"
  Vendor: pci 0x1022 "AMD"
  Device: pci 0x2095 "CS5536 [Geode companion] EHC"
  SubVendor: pci 0x1022 "AMD"
  SubDevice: pci 0x2095
  Revision: 0x02
  Driver: "ehci_hcd"
  Driver Modules: "ehci_hcd"
  Memory Range: 0xef900000-0xef900fff (rw,non-prefetchable)
  IRQ: 10 (no events)
  Module Alias: "pci:v00001022d00002095sv00001022sd00002095bc0Csc03i20"
  Driver Info #0:
    Driver Status: ehci-hcd is not active
    Driver Activation Cmd: "modprobe ehci-hcd"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

11: PCI 0f.4: 0c03 USB Controller (OHCI)
  [Created at pci.314]
  UDI: /org/freedesktop/Hal/devices/pci_1022_2094
  Unique ID: RJNG.HLQlI8DrR2E
  SysFS ID: /devices/pci0000:00/0000:00:0f.4
  SysFS BusID: 0000:00:0f.4
  Hardware Class: usb controller
  Model: "AMD CS5536 [Geode companion] OHC"
  Vendor: pci 0x1022 "AMD"
  Device: pci 0x2094 "CS5536 [Geode companion] OHC"
  SubVendor: pci 0x1022 "AMD"
  SubDevice: pci 0x2094
  Revision: 0x02
  Driver: "ohci_hcd"
  Memory Range: 0xeff00000-0xeff00fff (rw,non-prefetchable)
  IRQ: 10 (no events)
  Module Alias: "pci:v00001022d00002094sv00001022sd00002094bc0Csc03i10"
  Driver Info #0:
    Driver Status: ohci-hcd is not active
    Driver Activation Cmd: "modprobe ohci-hcd"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

12: PCI 0f.3: 0401 Multimedia audio controller
  [Created at pci.314]
  UDI: /org/freedesktop/Hal/devices/pci_1022_2093
  Unique ID: a_tQ.KBPfOWuF5X7
  SysFS ID: /devices/pci0000:00/0000:00:0f.3
  SysFS BusID: 0000:00:0f.3
  Hardware Class: sound
  Model: "AMD CS5536 [Geode companion] Audio"
  Vendor: pci 0x1022 "AMD"
  Device: pci 0x2093 "CS5536 [Geode companion] Audio"
  SubVendor: pci 0x1022 "AMD"
  SubDevice: pci 0x2093
  Revision: 0x01
  Driver: "cs5535audio"
  Driver Modules: "snd_cs5535audio"
  I/O Ports: 0xdc80-0xdcff (rw)
  IRQ: 5 (6755 events)
  Module Alias: "pci:v00001022d00002093sv00001022sd00002093bc04sc01i00"
  Driver Info #0:
    Driver Status: snd_cs5535audio is active
    Driver Activation Cmd: "modprobe snd_cs5535audio"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

13: PCI 0f.2: 0101 IDE interface
  [Created at pci.314]
  UDI: /org/freedesktop/Hal/devices/pci_1022_209a
  Unique ID: ifOb.V_qu2ejf_uC
  SysFS ID: /devices/pci0000:00/0000:00:0f.2
  SysFS BusID: 0000:00:0f.2
  Hardware Class: storage
  Model: "AMD CS5536 [Geode companion] IDE"
  Vendor: pci 0x1022 "AMD"
  Device: pci 0x209a "CS5536 [Geode companion] IDE"
  SubVendor: pci 0x1022 "AMD"
  SubDevice: pci 0x209a
  Revision: 0x01
  Driver: "pata_amd"
  I/O Ports: 0x1f0-0x1f7 (rw)
  I/O Port: 0x3f6 (rw)
  I/O Ports: 0x170-0x177 (rw)
  I/O Port: 0x376 (rw)
  I/O Ports: 0xeff0-0xefff (rw)
  Module Alias: "pci:v00001022d0000209Asv00001022sd0000209Abc01sc01i80"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

14: PCI 0f.0: 0601 ISA bridge
  [Created at pci.314]
  UDI: /org/freedesktop/Hal/devices/pci_1022_2090
  Unique ID: _+Pw.Iif6nhF3_1C
  SysFS ID: /devices/pci0000:00/0000:00:0f.0
  SysFS BusID: 0000:00:0f.0
  Hardware Class: bridge
  Model: "AMD CS5536 [Geode companion] ISA"
  Vendor: pci 0x1022 "AMD"
  Device: pci 0x2090 "CS5536 [Geode companion] ISA"
  SubVendor: pci 0x1022 "AMD"
  SubDevice: pci 0x2090
  Revision: 0x03
  I/O Ports: 0x6000-0x6007 (rw)
  I/O Ports: 0x6100-0x61ff (rw)
  I/O Ports: 0x6200-0x623f (rw)
  I/O Ports: 0x1800-0x181f (rw)
  I/O Ports: 0x9d00-0x9d7f (rw)
  I/O Ports: 0x9c00-0x9c3f (rw)
  Module Alias: "pci:v00001022d00002090sv00001022sd00002090bc06sc01i00"
  Driver Info #0:
    Driver Status: cs5535_gpio is active
    Driver Activation Cmd: "modprobe cs5535_gpio"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

15: PCI 0e.0: 0607 CardBus bridge
  [Created at pci.314]
  UDI: /org/freedesktop/Hal/devices/pci_104c_ac56
  Unique ID: vuMS.jmB_c50gSh6
  SysFS ID: /devices/pci0000:00/0000:00:0e.0
  SysFS BusID: 0000:00:0e.0
  Hardware Class: bridge
  Model: "Texas Instruments PCI1510 PC card Cardbus Controller"
  Vendor: pci 0x104c "Texas Instruments"
  Device: pci 0xac56 "PCI1510 PC card Cardbus Controller"
  SubVendor: pci 0x104c "Texas Instruments"
  SubDevice: pci 0xac56
  Driver: "yenta_cardbus"
  Driver Modules: "yenta_socket"
  Memory Range: 0xefc00000-0xefc00fff (rw,non-prefetchable)
  IRQ: 7 (1 event)
  Module Alias: "pci:v0000104Cd0000AC56sv0000104Csd0000AC56bc06sc07i00"
  Driver Info #0:
    Driver Status: yenta_socket is active
    Driver Activation Cmd: "modprobe yenta_socket"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

16: PCI 0d.0: 0200 Ethernet controller
  [Created at pci.314]
  UDI: /org/freedesktop/Hal/devices/pci_10ec_8139
  Unique ID: rBUF.IQxIdIhhuH7
  SysFS ID: /devices/pci0000:00/0000:00:0d.0
  SysFS BusID: 0000:00:0d.0
  Hardware Class: network
  Model: "Realtek RT8139"
  Vendor: pci 0x10ec "Realtek Semiconductor Co., Ltd."
  Device: pci 0x8139 "RTL-8139/8139C/8139C+"
  SubVendor: pci 0x10ec "Realtek Semiconductor Co., Ltd."
  SubDevice: pci 0x8139 "RT8139"
  Revision: 0x10
  Driver: "8139too"
  Driver Modules: "8139too"
  Device File: eth0
  I/O Ports: 0xdf00-0xdfff (rw)
  Memory Range: 0xefd00000-0xefd000ff (rw,non-prefetchable)
  IRQ: 5 (6755 events)
  HW Address: 00:1a:13:b0:90:be
  Link detected: yes
  Module Alias: "pci:v000010ECd00008139sv000010ECsd00008139bc02sc00i00"
  Driver Info #0:
    Driver Status: 8139too is active
    Driver Activation Cmd: "modprobe 8139too"
  Driver Info #1:
    Driver Status: 8139cp is active
    Driver Activation Cmd: "modprobe 8139cp"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

17: PCI 01.2: 1010 Entertainment encryption device
  [Created at pci.314]
  UDI: /org/freedesktop/Hal/devices/pci_1022_2082
  Unique ID: e6j0.CpF8ZF3vymC
  SysFS ID: /devices/pci0000:00/0000:00:01.2
  SysFS BusID: 0000:00:01.2
  Hardware Class: unknown
  Model: "AMD Geode LX AES Security Block"
  Vendor: pci 0x1022 "AMD"
  Device: pci 0x2082 "Geode LX AES Security Block"
  SubVendor: pci 0x1022 "AMD"
  SubDevice: pci 0x2082
  Driver: "Geode LX AES"
  Driver Modules: "geode_aes"
  Memory Range: 0xefe00000-0xefe03fff (rw,non-prefetchable)
  IRQ: 11 (no events)
  Module Alias: "pci:v00001022d00002082sv00001022sd00002082bc10sc10i00"
  Driver Info #0:
    Driver Status: geode_rng is active
    Driver Activation Cmd: "modprobe geode_rng"
  Driver Info #1:
    Driver Status: geode_aes is active
    Driver Activation Cmd: "modprobe geode_aes"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

18: PCI 01.1: 0300 VGA compatible controller (VGA)
  [Created at pci.314]
  UDI: /org/freedesktop/Hal/devices/pci_1022_2081
  Unique ID: mnDB.j5Ti6sFvYK8
  SysFS ID: /devices/pci0000:00/0000:00:01.1
  SysFS BusID: 0000:00:01.1
  Hardware Class: graphics card
  Model: "AMD Geode LX"
  Vendor: pci 0x1022 "AMD"
  Device: pci 0x2081 "Geode LX"
  SubVendor: pci 0x1022 "AMD"
  SubDevice: pci 0x2081
  Memory Range: 0x90000000-0x91ffffff (rw,non-prefetchable)
  Memory Range: 0x8fffc000-0x8fffffff (rw,non-prefetchable)
  Memory Range: 0x8fff8000-0x8fffbfff (rw,non-prefetchable)
  Memory Range: 0x8fff4000-0x8fff7fff (rw,non-prefetchable)
  Memory Range: 0x8fff0000-0x8fff3fff (rw,non-prefetchable)
  IRQ: 11 (no events)
  I/O Ports: 0x3c0-0x3df (rw)
  Module Alias: "pci:v00001022d00002081sv00001022sd00002081bc03sc00i00"
  Driver Info #0:
    XFree86 v4 Server Module: amd
  Config Status: cfg=new, avail=yes, need=no, active=unknown

19: PCI 01.0: 0600 Host bridge
  [Created at pci.314]
  UDI: /org/freedesktop/Hal/devices/pci_1022_2080
  Unique ID: vSkL.1NaY1topiiD
  SysFS ID: /devices/pci0000:00/0000:00:01.0
  SysFS BusID: 0000:00:01.0
  Hardware Class: bridge
  Model: "AMD CS5536 [Geode companion] Host Bridge"
  Vendor: pci 0x1022 "AMD"
  Device: pci 0x2080 "CS5536 [Geode companion] Host Bridge"
  SubVendor: pci 0x1022 "AMD"
  SubDevice: pci 0x2080
  Revision: 0x33
  I/O Ports: 0xac1c-0xac1f (rw)
  Module Alias: "pci:v00001022d00002080sv00001022sd00002080bc06sc00i00"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

20: None 00.0: 10600 Disk
  [Created at block.243]
  Unique ID: TrYz.Fxp0d3BezAE
  SysFS ID: /class/block/ramzswap0
  Hardware Class: disk
  Model: "Disk"
  Device File: /dev/ramzswap0
  Device Number: block 251:0
  Drive status: no medium
  Config Status: cfg=new, avail=yes, need=no, active=unknown

21: IDE 00.0: 10600 Disk
  [Created at block.243]
  UDI: /org/freedesktop/Hal/devices/storage_serial_SATA_FUJITSU_MHW2060_K003T8228D91
  Unique ID: 3OOL.UwrAj4x_SFE
  Parent ID: ifOb.V_qu2ejf_uC
  SysFS ID: /class/block/sda
  SysFS BusID: 0:0:0:0
  SysFS Device Link: /devices/pci0000:00/0000:00:0f.2/host0/target0:0:0/0:0:0:0
  Hardware Class: disk
  Model: "FUJITSU MHW2060A"
  Vendor: "FUJITSU"
  Device: "MHW2060A"
  Revision: "0000"
  Driver: "pata_amd", "sd"
  Device File: /dev/sda
  Device Number: block 8:0-8:15
  Drive status: no medium
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #13 (IDE interface)

22: None 00.0: 11300 Partition
  [Created at block.412]
  UDI: /org/freedesktop/Hal/devices/volume_uuid_8a9d5120_ad0d_461e_ae16_ec00b61097bb
  Unique ID: bdUI.SE1wIdpsiiC
  Parent ID: 3OOL.UwrAj4x_SFE
  SysFS ID: /class/block/sda/sda1
  Hardware Class: partition
  Model: "Partition"
  Device File: /dev/sda1
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #21 (Disk)

23: None 00.0: 11300 Partition
  [Created at block.412]
  UDI: /org/freedesktop/Hal/devices/volume_uuid_5515ed2a_9f6f_4ca0_b39f_da06ea8c1e20
  Unique ID: 2pkM.SE1wIdpsiiC
  Parent ID: 3OOL.UwrAj4x_SFE
  SysFS ID: /class/block/sda/sda2
  Hardware Class: partition
  Model: "Partition"
  Device File: /dev/sda2
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #21 (Disk)

24: None 00.0: 11300 Partition
  [Created at block.412]
  UDI: /org/freedesktop/Hal/devices/volume_uuid_801e8a1b_fc63_43cd_b19e_48051374d00d
  Unique ID: W__Q.SE1wIdpsiiC
  Parent ID: 3OOL.UwrAj4x_SFE
  SysFS ID: /class/block/sda/sda3
  Hardware Class: partition
  Model: "Partition"
  Device File: /dev/sda3
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #21 (Disk)

25: USB 00.0: 10a00 Hub
  [Created at usb.122]
  UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_0f_4_if0
  Unique ID: pBe4.cvV1lTsD8N3
  Parent ID: RJNG.HLQlI8DrR2E
  SysFS ID: /devices/pci0000:00/0000:00:0f.4/usb2/2-0:1.0
  SysFS BusID: 2-0:1.0
  Hardware Class: hub
  Model: "Linux 2.6.28-16-generic ohci_hcd OHCI Host Controller"
  Hotplug: USB
  Vendor: usb 0x1d6b "Linux 2.6.28-16-generic ohci_hcd"
  Device: usb 0x0001 "OHCI Host Controller"
  Revision: "2.06"
  Serial ID: "0000:00:0f.4"
  Driver: "hub"
  Driver Modules: "usbcore"
  Speed: 12 Mbps
  Module Alias: "usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #11 (USB Controller)

26: USB 00.0: 10a00 Hub
  [Created at usb.122]
  UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_0f_5_if0
  Unique ID: k4bc.G_ipYBRd0t3
  Parent ID: Jes5.ZNl012BuTB8
  SysFS ID: /devices/pci0000:00/0000:00:0f.5/usb1/1-0:1.0
  SysFS BusID: 1-0:1.0
  Hardware Class: hub
  Model: "Linux 2.6.28-16-generic ehci_hcd EHCI Host Controller"
  Hotplug: USB
  Vendor: usb 0x1d6b "Linux 2.6.28-16-generic ehci_hcd"
  Device: usb 0x0002 "EHCI Host Controller"
  Revision: "2.06"
  Serial ID: "0000:00:0f.5"
  Driver: "hub"
  Driver Modules: "usbcore"
  Speed: 480 Mbps
  Module Alias: "usb:v1D6Bp0002d0206dc09dsc00dp00ic09isc00ip00"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #10 (USB Controller)

27: ADB 00.0: 10502 Bus Mouse
  [Created at input.183]
  UDI: /org/freedesktop/Hal/devices/computer_logicaldev_input
  Unique ID: kZYT.VdKNesd9pT6
  Hardware Class: mouse
  Model: "Macintosh mouse button emulation"
  Vendor: 0x0001
  Device: 0x0001 "Macintosh mouse button emulation"
  Compatible to: int 0x0210 0x0003
  Device File: /dev/input/mice (/dev/input/mouse0)
  Device Files: /dev/input/mice, /dev/input/mouse0, /dev/input/event0
  Device Number: char 13:63 (char 13:32)
  Driver Info #0:
    Buttons: 3
    Wheels: 0
    XFree86 Protocol: explorerps/2
    GPM Protocol: exps2
  Config Status: cfg=new, avail=yes, need=no, active=unknown

28: PS/2 00.0: 10800 Keyboard
  [Created at input.161]
  UDI: /org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input
  Unique ID: EXC1.+49ps10DtUF
  Hardware Class: keyboard
  Model: "AT Translated Set 2 keyboard"
  Vendor: 0x0001
  Device: 0x0001 "AT Translated Set 2 keyboard"
  Compatible to: int 0x0211 0x0001
  Device File: /dev/input/event1
  Device Number: char 13:65
  Driver Info #0:
    XkbRules: xfree86
    XkbModel: pc104
  Config Status: cfg=new, avail=yes, need=no, active=unknown

29: PS/2 00.0: 10500 PS/2 Mouse
  [Created at input.183]
  UDI: /org/freedesktop/Hal/devices/platform_i8042_i8042_AUX2_port_logicaldev_input
  Unique ID: AH6Q.U5GX9Ignjc0
  Hardware Class: mouse
  Model: "PS/2 Generic Mouse"
  Vendor: 0x0002
  Device: 0x0001 "PS/2 Generic Mouse"
  Compatible to: int 0x0210 0x0003
  Device File: /dev/input/mice (/dev/input/mouse1)
  Device Files: /dev/input/mice, /dev/input/mouse1, /dev/input/event3
  Device Number: char 13:63 (char 13:33)
  Driver Info #0:
    Buttons: 3
    Wheels: 0
    XFree86 Protocol: explorerps/2
    GPM Protocol: exps2
  Config Status: cfg=new, avail=yes, need=no, active=unknown

30: None 00.0: 10103 CPU
  [Created at cpu.304]
  Unique ID: rdCR.j8NaKXDZtZ6
  Hardware Class: cpu
  Arch: Intel
  Vendor: "AuthenticAMD"
  Model: 5.10.2 "Geode(TM) Integrated Processor by AMD PCS"
  Features: fpu,de,pse,tsc,msr,cx8,sep,pge,cmov,clflush,mmx,mmxext,3dnowext,3dnow,up
  Clock: 500 MHz
  BogoMips: 996.07
  Cache: 128 kb
  Config Status: cfg=new, avail=yes, need=no, active=unknown

31: None 00.0: 10701 Ethernet
  [Created at net.124]
  Unique ID: fLK9.ndpeucax6V1
  SysFS ID: /class/net/pan0
  Hardware Class: network interface
  Model: "Ethernet network interface"
  Driver: "bridge"
  Device File: pan0
  HW Address: 32:99:94:8a:0f:5b
  Config Status: cfg=new, avail=yes, need=no, active=unknown

32: None 00.0: 10701 Ethernet
  [Created at net.124]
  Unique ID: usDW.ndpeucax6V1
  Parent ID: rBUF.IQxIdIhhuH7
  SysFS ID: /class/net/eth0
  SysFS Device Link: /devices/pci0000:00/0000:00:0d.0
  Hardware Class: network interface
  Model: "Ethernet network interface"
  Driver: "8139too"
  Driver Modules: "8139too"
  Device File: eth0
  HW Address: 00:1a:13:b0:90:be
  Link detected: yes
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #16 (Ethernet controller)

33: None 00.0: 10700 Loopback
  [Created at net.124]
  Unique ID: ZsBS.GQNx7L4uPNA
  SysFS ID: /class/net/lo
  Hardware Class: network interface
  Model: "Loopback network interface"
  Device File: lo
  Link detected: yes
  Config Status: cfg=new, avail=yes, need=no, active=unknown


:) :) :)

yeticannotski

#1
28 de Outubro de 2009, 07:15
Não tenho um Netbook, mas dei uma olhada em uns fóruns a questão da resolução realmente parece ser um problema para o Gnome. Você já tentou instalar o Ubuntu Netbook Remix?

Se quiser alguns truques para mover janelas que ficam fora da área da tela, que pode ajudar a conviver com a resolução diferente, avise.

kleberguedes

#2
02 de Novembro de 2009, 17:30
Já instalei o Ubuntu remix 9.10 , mas ficou muito lento com consumo de CPU em 100% . Gostaria de saber se podemos modificar a tela do Ubuntu 9.10 para ficar igual ao do remix e ve o que acontece.

VB5

#3
02 de Novembro de 2009, 23:37
kleberguedes,

Não sei se pode ajudar, mas uso uma GeForce 6200 com um monitor LG W2053TQ (WS 20"), e não tive problema para criar uma resolução própria de 1360 x 768, que é a mais confortável visualmente no caso, ainda que não seja a recomendada. Certifique-se de ter todos os drivers de sua placa (Geode LX) instalados, pode ser isso.

VB5
Ubuntu 10.04 - Semprom 2600+/Asus K8N/1.5 GB RAM DDR 400/GeForce 6200/HDs: 80MB + 320 GB

ezrandrade

#4
17 de Fevereiro de 2010, 21:41
Citação de: VB5 online 02 de Novembro de 2009, 23:37
kleberguedes,

Não sei se pode ajudar, mas uso uma GeForce 6200 com um monitor LG W2053TQ (WS 20"), e não tive problema para criar uma resolução própria de 1360 x 768, que é a mais confortável visualmente no caso, ainda que não seja a recomendada. Certifique-se de ter todos os drivers de sua placa (Geode LX) instalados, pode ser isso.

VB5


E como é que faz para customizar essa nova resolução?

ezrandrade

#5
19 de Fevereiro de 2010, 21:43 Última edição: 19 de Fevereiro de 2010, 22:00 por ezrandrade
Como o chipset do vídeo deste netbook é um AMD Geode LX-800, andei garimpando a internet quase ao ponto de desistir novamente, quando me deparei de que existe um .DEB que ajusta o vídeo ao monitor. Acontece que baixei e rodei o arquivo e não vi resultado algum. Alguém mais experiente que eu se habilitaria a explicar o que deve ser feito depois de instalado?
O arquivo é xserver-xorg-video-geode e pode ser baixado no seguinte link do debian: http://mirror.pop-sc.rnp.br/mirror/Debian/pool/main/x/xserver-xorg-video-geode/xserver-xorg-video-amd_2.11.7-1_i386.deb

Desde já, obrigado.

ezrandrade

#6
12 de Maio de 2010, 12:51
Finalmente, consegui resolver o problema com a resolução do monitor que insistia em 1024x768 ao invés de 1024x600.
A solução estava no fórum do Linux Mint (http://www.linuxmint.com.br/modules/newbb/viewtopic.php?start=20&topic_id=161&viewmode=flat&order=ASC&type=&mode=0) Post #22.
O xorg.conf customizado para este netbook segue abaixo. Espero que tenham sucesso, como eu tive. Abraços.

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "abnt2"
Option "XkbLayout" "pt"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
EndSection

Section "Device"
Identifier "Configured Video Device"
Boardname "vesa"
Busid "PCI:0:1:1"
Driver "geode"
Option "AccelMethod" "EXA"
Option "MigrationHeuristic" "greedy"
Option "PanelMode" "48960 1024 1064 1168 1312 600 601 604 622"
Screen 0
EndSection

Section "Monitor"
Identifier "Configured Monitor"
Vendorname "Generic LCD Display"
Modelname "LCD Panel 1024x600"
HorizSync 31.5 - 37.9
VertRefresh 50.0 - 70.0
DisplaySize 195 113
modeline "1024x600@60" 48.96 1024 1064 1168 1312 600 601 604 622 -HSync -VSync
Gamma 1.0
EndSection

Section "Screen"
Identifier "Default Screen"
Device "Configured Video Device"
Monitor "Configured Monitor"
Defaultdepth 24
   SubSection "Display"
   Depth 24
   Virtual 1024 600
   Modes "1024x600@60"
   EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
screen 0 "Default Screen" 0 0
EndSection

Section "Module"
Load "glx"
Load "GLcore"
Load "v4l"
EndSection

Section "ServerFlags"
EndSection

Zepa

#7
10 de Junho de 2010, 12:26
Aqui nao resolveu :(

carirygondim

#8
11 de Junho de 2010, 15:25

Citação de: ezrandrade online 12 de Maio de 2010, 12:51
Finalmente, consegui resolver o problema com a resolução do monitor que insistia em 1024x768 ao invés de 1024x600.
A solução estava no fórum do Linux Mint (http://www.linuxmint.com.br/modules/newbb/viewtopic.php?start=20&topic_id=161&viewmode=flat&order=ASC&type=&mode=0) Post #22.
O xorg.conf customizado para este netbook segue abaixo. Espero que tenham sucesso, como eu tive. Abraços.

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "abnt2"
Option "XkbLayout" "pt"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
EndSection

Section "Device"
Identifier "Configured Video Device"
Boardname "vesa"
Busid "PCI:0:1:1"
Driver "geode"
Option "AccelMethod" "EXA"
Option "MigrationHeuristic" "greedy"
Option "PanelMode" "48960 1024 1064 1168 1312 600 601 604 622"
Screen 0
EndSection

Section "Monitor"
Identifier "Configured Monitor"
Vendorname "Generic LCD Display"
Modelname "LCD Panel 1024x600"
HorizSync 31.5 - 37.9
VertRefresh 50.0 - 70.0
DisplaySize 195 113
modeline "1024x600@60" 48.96 1024 1064 1168 1312 600 601 604 622 -HSync -VSync
Gamma 1.0
EndSection

Section "Screen"
Identifier "Default Screen"
Device "Configured Video Device"
Monitor "Configured Monitor"
Defaultdepth 24
   SubSection "Display"
   Depth 24
   Virtual 1024 600
   Modes "1024x600@60"
   EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
screen 0 "Default Screen" 0 0
EndSection

Section "Module"
Load "glx"
Load "GLcore"
Load "v4l"
EndSection

Section "ServerFlags"
EndSection



Uso o Ubuntu 10.04 LTS.
A resolução que consigo é 1024 x 768 (boa para mim), mas com 60 Hz (ruim para minha vista). Pela experiência com meu pc e com Windows XP, o melhor é colocar 70 Hz com a mesma resolução 1024 x 768. O problema é que não existe tal opção com o driver fornecido para placa Nvidia. Como conseguir tal 70 Hz?

ezrandrade

#10
15 de Novembro de 2010, 17:54
O problema foi solucionado na versão 10.10. O Ubuntu já reconhece a resolução. Basta apenas ir no gerenciador de resolução e mudar para 1024x600.
Imprimir
Ir para o topo Páginas1
Ações