Placa RealAngel ou PixewViewPro (cx23880)

[k.rossit]

Pessoas,
Nao consigo fazer rodar a placa. Já Li outros tópicos e mesmo assim, nada...
quando dou o dmseg aparecem as configurações abaixo...

Código Selecionar Expandir


[   23.788304] cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
[   23.788405] cx8800 0000:00:09.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   23.789017] cx88[0]: subsystem: 14f1:ea3d, board: PowerColor RA330 [card=62,autodetected]
[   23.789021] cx88[0]: TV tuner type 71, Radio tuner type 0
[   23.789057] end_request: I/O error, dev sr0, sector 0
[   23.789066] Buffer I/O error on device sr0, logical block 0
[   23.789072] Buffer I/O error on device sr0, logical block 1
[   23.789083] Buffer I/O error on device sr0, logical block 2
[   23.789088] Buffer I/O error on device sr0, logical block 3
[   23.789092] Buffer I/O error on device sr0, logical block 4
[   23.789097] Buffer I/O error on device sr0, logical block 5
[   23.789101] Buffer I/O error on device sr0, logical block 6
[   23.789106] Buffer I/O error on device sr0, logical block 7
[   23.790749] end_request: I/O error, dev sr0, sector 0
[   23.790757] Buffer I/O error on device sr0, logical block 0
[   23.790763] Buffer I/O error on device sr0, logical block 1
[   24.170583] tuner' 0-0061: chip found @ 0xc2 (cx88[0])
[   24.283138] xc2028 0-0061: creating new instance
[   24.283145] xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner
[   24.283159] cx88[0]: Asking xc2028/3028 to load firmware xc3028-v27.fw
[   24.283298] input: cx88 IR (PowerColor RA330) as /devices/pci0000:00/0000:00:09.0/input/input6
[   24.283317] cx88 IR (PowerColor RA330): unknown key: key=0x3f raw=0x3f down=1
[   24.283320] cx88 IR (PowerColor RA330): unknown key: key=0x3f raw=0x3f down=0
[   24.332768] cx88[0]/0: found at 0000:00:09.0, rev: 5, irq: 18, latency: 32, mmio: 0xec000000
[   24.332872] cx88[0]/0: registered device video0 [v4l2]
[   24.332922] cx88[0]/0: registered device vbi0
[   24.332970] cx88[0]/0: registered device radio0
[   24.332990] firmware: requesting xc3028-v27.fw
[   25.062782] xc2028 0-0061: Error: firmware xc3028-v27.fw not found.


Isso quando o arquivo está assim:

# Enable double-buffering so gstreamer et. al. work
options quickcam compatible=2

# Default hostap to managed mode
options hostap_pci iw_mode=2
options hostap_cs iw_mode=2

# Stop auto-association.
# LP: #264104
options cx88xx card=62 i2c_scan=1

# XXX: Ignore HPA by default. Needs to be revisted in jaunty
options libata ignore_hpa=1

Se eu mudo para
options cx88xx card=27 i2c_scan=1

No dmesg aparece:

Código Selecionar Expandir


[   23.955274] cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
[   23.955662] cx8800 0000:00:09.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   23.956258] cx88[0]: subsystem: 14f1:ea3d, board: PixelView PlayTV Ultra Pro (Stereo) [card=27,insmod option]
[   23.956263] cx88[0]: TV tuner type 38, Radio tuner type -1
[   23.970044] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5
[   24.035839] parport_pc 00:0a: reported by Plug and Play ACPI
[   24.035887] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   24.101347] cx88[0]: i2c scan: found device @ 0x66  [???]
[   24.117378] cx88[0]: i2c scan: found device @ 0xa0  [eeprom]
[   24.117515] cx88[0]: i2c scan: found device @ 0xa2  [???]
[   24.117649] cx88[0]: i2c scan: found device @ 0xa4  [???]
[   24.117786] cx88[0]: i2c scan: found device @ 0xa6  [???]
[   24.117923] cx88[0]: i2c scan: found device @ 0xa8  [???]
[   24.118058] cx88[0]: i2c scan: found device @ 0xaa  [???]
[   24.118193] cx88[0]: i2c scan: found device @ 0xac  [???]
[   24.118328] cx88[0]: i2c scan: found device @ 0xae  [???]
[   24.124005] cx88[0]: i2c scan: found device @ 0xc2  [tuner (analog/dvb)]
[   24.192750] tuner' 0-0061: chip found @ 0xc2 (cx88[0])
[   24.659338] tuner-simple 0-0061: creating new instance
[   24.659348] tuner-simple 0-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3))
[   24.660077] input: cx88 IR (PixelView PlayTV Ultra as /devices/pci0000:00/0000:00:09.0/input/input6
[   24.704814] cx88[0]/0: found at 0000:00:09.0, rev: 5, irq: 18, latency: 32, mmio: 0xec000000
[   24.704912] cx88[0]/0: registered device video0 [v4l2]
[   24.704958] cx88[0]/0: registered device vbi0
[   24.705005] cx88[0]/0: registered device radio0
[   24.803762] Intel ICH 0000:00:02.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[   25.124605] intel8x0_measure_ac97_clock: measured 54860 usecs
[   25.124611] intel8x0: clocking to 48000
[   25.880541] lp0: using parport0 (interrupt-driven).
[   26.038155] Adding 570268k swap on /dev/sda7.  Priority:-1 extents:1 across:570268k


Mesmo quando eu coloco o tuner de acordo com o especificado tuner=71 para RealAngel ou tuner=38 para PixewViel e reinicio, quando abro o tvtime dá sem sinal. Já mudei a a "norma" e etc,  e nada.

Eu comprei a placa como RealAngel, mas quando configuro por ela, o firmware nao é localizado? É isso mesmo que acontece?

Se alguem puder me ajudar eu agradeço!

Ainda sou leigo em Linux. Uso o Ubuntu 8.10. E nao entendo nada de linha de comando.

Kadu

[mstr]

[   24.170583] tuner' 0-0061: chip found @ 0xc2 (cx88[0])
[   24.283138] xc2028 0-0061: creating new instance
[   24.283145] xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner
[   24.283159] cx88[0]: Asking xc2028/3028 to load firmware xc3028-v27.fw
[   24.283298] input: cx88 IR (PowerColor RA330) as /devices/pci0000:00/0000:00:09.0/input/input6
[   24.283317] cx88 IR (PowerColor RA330): unknown key: key=0x3f raw=0x3f down=1
[   24.283320] cx88 IR (PowerColor RA330): unknown key: key=0x3f raw=0x3f down=0
[   24.332768] cx88[0]/0: found at 0000:00:09.0, rev: 5, irq: 18, latency: 32, mmio: 0xec000000
[   24.332872] cx88[0]/0: registered device video0 [v4l2]
[   24.332922] cx88[0]/0: registered device vbi0
[   24.332970] cx88[0]/0: registered device radio0
[   24.332990] firmware: requesting xc3028-v27.fw
[   25.062782] xc2028 0-0061: Error: firmware xc3028-v27.fw not found.

é por isso que não vai, o firmware não encontrado

verifica se com isso vai http://placadecaptura.co.cc/nome/instalar.php?id=cx88xx&n=22