[resolvido] como configurar moden dial up em dell inspiron 15

[marcosrokc]

como configurar o moden para um dell inspiron 1525??

[dtomadon]

Olá boa noite , sou novo no ubuntu , minha máquina também é dual boot vista/ubuntu, minha primeira dificuldade no ubuntu foi configurar meu modem para acessar a internet na minha cidade ainda discada, buscando ajuda neste fórum, a primeira pergunta que me fizeram foi qual meu modem, se você não sabe responder também faça o seguinte :  baixe o programa no endereço
http://linmodems.technion.ac.il/packages/scanModem.gz e depois faça o que segue abaixo.

Coloque na sua pasta de usuário na home, clique com o botão direito do mouse sobre ele e escolha a opção extrair aqui. Depois abra um terminal (Aplicações > Acessórios > Consola ou Terminal) e digite:

chmod +x scanModem*

para executar digite:

./scanModem*

aguarde o processo terminar e depois vá na sua pasta de usuário que lá terá uma pasta chamada Modem com vários arquivos .txt, cole aqui o conteúdo do arquivo ModemData.txt

depois abra outro terminal e digite lspci e lspci -n e coloque aqui para vermos o resultado.

Esses comandos me foram passados pelo membro " Alarcon " .

Tenho pouquissíma experiência em linux mas espero poder ajudá-lo se não conseguir outros membros com certeza irão fazer..

[marcosrokc]

Meu caro companheiro de aprendizagem em Linux, segui seus passos e ai esta o resultado:

Only plain text email is forwarded by the  Discuss@Linmodems.org List Server,
as HTML can contain viruses. Use as the email Subject Line:
           YourName, YourCountry  kernel 2.6.24-16-generic
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@Linmodems.org are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
--------------------------  System information ----------------------------
CPU=x86_64, 
Linux version 2.6.24-16-generic (buildd@yellow) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 12:47:45 UTC 2008
scanModem update of:  2008_08_26


Some modem drivers can only be used in 32 bit modem on x86_64 systems,
while some others are competent on x86_64 Systems.  Cases are:
1) http://linmodems.technion.ac.il/bigarch/archive-seventh/msg03119.html
for the snd-hda-intel audio+modem driver. Also applicable to AC97 modem controllers.
In both cases, 32 bit libraries must be installed to support the slmodemd helper having a precompiled 32 bit component.
2) For USB modems using the slusb.ko driver. 32 bit libraries must be installed to support the slmodemd helper having a precompiled 32 bit component
3) The hsfmodem and hcfpcimodem drivers for Conexant chipsest modes are x86_64 competent.

There are no blacklisted modem drivers in /etc/modprobe*  files
Attached USB devices are:
ID 05a9:2640 OmniVision Technologies, Inc.
ID 1241:1122 Belkin

USB modems not recognized

For candidate card in slot 00:1b.0, firmware information and bootup diagnostics are:
PCI slot   PCI ID      SubsystemID   Name
----------   ---------   ---------   --------------
00:1b.0   8086:284b   1028:022f   Audio device: Intel Corporation 82801H

Modem interrupt assignment and sharing:
21:       3017       2870   IO-APIC-fasteoi   uhci_hcd:usb2, uhci_hcd:usb4, HDA Intel
--- Bootup diagnostics for card in PCI slot 00:1b.0 ----
[   24.199708] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21
[   24.200252] PCI: Setting latency timer of device 0000:00:1b.0 to 64


===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.

The ALSA verion is 1.0.16
The modem cards detected by "aplay -l"  are: None


The /proc/asound/pcm file reports:
-----------------------
00-00: STAC92xx Analog : STAC92xx Analog : playback 1 : capture 3
00-03: ATI HDMI : ATI HDMI : playback 1

about /proc/asound/cards:
------------------------
0 [Intel          ]: HDA-Intel - HDA Intel
                      HDA Intel at 0xfe9fc000 irq 21

PCI slot 00:1b.0 has a High Definition Audio Card
The drivers are in the kernel modules tree at:
/lib/modules/2.6.24-16-generic/ubuntu/sound/alsa-driver/pci/hda/snd-hda-intel.ko
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===

A candidate modem is not evident among the PCI devices:
------------------------------------------------
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c)
00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02)
02:09.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
02:09.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
02:09.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12)
02:09.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
02:09.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev ff)
09:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller (rev 12)
------------------------------------------------
with USB and bridge devices not displayed.

If your modem is connected by an external serial cable,
or mounted internally on an ISA card, scanModem would not access it.
Try with Root permission
$ sudo wvdialconf  /etc/wvdial.conf
to detect these modem types and some USB modems.
If the detection is successful, read the DOCs/wvdial.txt .
Edit the /etc/wvdial.conf with Root permission:
   sudo  gedit  /etc/wvdial.conf
  will be able to dial out with Root permission:
   sudo wvdial

Many modems for which scanModem fails have Conexant chips.
From http://www.linuxant.com/drivers/modemident.php
get the ListModem tool, which will report on Conexant chipset modems

If the above tests fail, please provide any independent information available on your modem.
If an alternative boot into Microsoft windows can be done, do mouse
clicks on:
   Start > Settings > Control Panel > Classical View (for Window XP) > System
> Hardware > Device Manager > Modems > Click on the + > Modem. Double click to
expand the graphic. Manufacturer information may be displayed. For example, CXT
stands for Conexant. Click the Diagnostics Tab. Record any hardware ID or vendor
and device information. From the Driver Details TAB, copy out the VENdor and DEVice information.
Next do the Query Modem and record the ATI specifications displayed such as:
    ATI3 - Agere SoftModem Version 2.1.22
    ATI5 - 2.1.22, AMR Intel MB, AC97 ID:SIL REV:0x27
Try to identify the modem setup file, with name perhaps MODEM.INF.
If may contain chipset Vendor informaton.

The /proc/asound/ audio+modem diagostics are being copied.
Finished copy to Modem/ALSAmpj.tgz

Predictive  diagnostics for card in bus 00:1b.0:
   Modem chipset not detected on
NAME="Audio device: Intel Corporation 82801H "
CLASS=0403
PCIDEV=8086:284b
SUBSYS=1028:022f
IRQ=21
HDA=8086:284b
SOFT=8086:284b.HDA


High Definition Audio (HDA) cards MAY host a modem chip in their Subsystem,
and many are supported by the ALSA audio+modem driver snd-hda-intel
A modem was not detected on HDA card 8086:284b.
If another modem card is present, then most likely 8086:284b does not host a modem.
If another modem card has not been detected, then possibilities are:
   1) A Conexant modem chip is present on 8086:284b, as Conexant chips
are frequently not detectable by ALSA diagnostics
   2) The modem may be of the older non-PCI Controller Chipset (hardware) type.
Try detection with Root permission:
   sudo wvdialconf  /etc/wvdial.conf

For candidate modem in:  00:1b.0
   0403 Audio device: Intel Corporation 82801H
      Primary device ID:  8086:284b
    Subsystem PCI_id  1028:022f
    Softmodem codec or chipset from diagnostics:
                               from    Archives:
                       
     

Support type needed or chipset:   

Support can likely be achieved through two mutually exclusive alternatives:
1) The hsfmodem software for Conexant chipset modems: Read DOCs/Conexant.txt
The following ALSA alternative CANNOT work with Conexant modems.

2) An ALSA modem driver plus slmodemd.  Read DOCs/Smartlink.txt for details, and
to test get the package SLMODEMD.gcc4.2.tar.gz from: 
   http://linmodems.technion.ac.il/packages/smartlink/

----------------end Softmodem section --------------

Writing DOCs/Intel.txt

For owners of a Dell PCs with Conexant HSF modems, a driver source package with full speed enabled is available, but requires driver compiling. Read DOCs/Conexant.txt


Start at http://www.linuxant.com/drivers/hsf/downloads-license.php to find the
hsfmodem package matching your System. For several Linux distros, there are
precompiled drivers matched to specific kernels. These have within the FileName,
your KernelVersion:   2.6.24_16_generic
They can be found through http://www.linuxant.com/drivers/hsf/full/downloads.php
A more precise location may be given a few paragraphs below.
If an EXACT Match with your your KernelVersion is not found, one of the
"Generic packages with source" near the bottom of the page must be used.
Downloaded packages must be moved into the Linux partition (home folder is OK)
and unzipped with:
   unzip hsf*.zip
The installation command for a .deb suffic packages is, with root/adm permission:
  sudo dpkg -i hsf*.deb
while for .rpm suffix it is, with:
  rpm -i hsf*.rpm

Support for Conexant chips hosted on High Definition Audio cards may require
installation of additional packages, one of the alsa-driver-linuxant packages
on  http://www.linuxant.com/alsa-driver/  At the same time download the
alsa-driver-1.0.17-1.patch , in case it prove to be later needed. During the
hsfmodem install, there will be a message if there is necessary installation of
alsa-driver-linuxant

The installation command for a .deb suffic packages is, with root/adm permission:
  sudo alsa* -i hsf*.deb
while for .rpm suffix it is, with:
  rpm -i hsf*.rpm

There may a message that "Dependencies" are not satisfied.  In this case the Ubuntu/Debian packages to be installed are linux-libc-dev & libc6-dev. Package
names may be different for other Linuxes. If not on your install CD, these
packages can be searched for at http://packages.ubuntu.com.  After download,
they can be coinstalled with:
   sudo dpkg -i li*.deb
Again try the alsa-driver-linuxant

There may be a message that the patch must be applied.  In this case get the
ftp://ftp.alsa-project.org/pub/driver/alsa-driver-1.0.17.tar.bz2
Under Linux, this package is unpacked with:
$ tar jxf alsa*.tar.bz2
Next the patch is applied with:
$ patch -p0 < alsa-driver-1.0.17-1.patch

See http://linmodems.technion.ac.il/bigarch/archive-eighth/msg00838.html
for details on compiling and installing replacement snd-hda-intel + its
dependent drivers.
After the installation is completed, rerun the hsfmodem installation.
Reboot and try to detect the modem with Root permission:
   sudo wvdialconf  /etc/wvdial.conf

From  http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
download hsfmodem-7.68.00.12full_k2.6.24_16_generic_ubuntu_i386.deb.zip
Under Linux unpack with:
$ unzip hsfmodem*.zip
Then install with:
$ sudo dpkg -i hsfmodem*.deb
Subsequently, the modem should be found with
$ sudo wvdialconf /etc/wvdial.conf
Edit in your personal information with:
$ sudo gedit /etc/wvdial.conf
and try dialing out with:
$ sudo wvdial.
See DOCs/Testing.txt  for details.

Read DOCs/Conexant.txt

Writing DOCs/Conexant.txt

Writing DOCs/Smartlink.txt
============ end Smartlink section =====================


The base of the UDEV device file system is: /dev/.udev

Versions adequately match for the compiler installed: 4.2.3
             and the compiler used in kernel assembly: 4.2.3



Minimal compiling resources appear complete:
   make utility - /usr/bin/make
   Compiler version 4.2
   linuc_headers base folder /lib/modules/2.6.24-16-generic/build

However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed in  /usr/include/ .
For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default.
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.




If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$  apt-get update
$  apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb


Checking pppd properties:
   -rwsr-xr-- 1 root dip 313600 2007-10-04 17:48 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
    http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
   $ su - root  (not for Ubuntu)
        sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
   sudo chmod a+x /usr/sbin/pppd

Checking settings of:   /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx

In case of a message like:
   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html

Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.

Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================

Checking for modem support lines:
--------------------------------------
     /device/modem symbolic link:   
slmodemd created symbolic link /dev/ttySL0: 
     Within /etc/udev/ files:

     Within /etc/modprobe.conf files:
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
     Within any ancient /etc/devfs files:

     Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------


mpj@mpj-laptop:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c)
00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 02)
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f2)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02)
02:09.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
02:09.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
02:09.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12)
02:09.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
02:09.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev ff)
09:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller (rev 12)
0b:00.0 Network controller: Broadcom Corporation BCM4310 USB Controller (rev 01)

mpj@mpj-laptop:~$ lspci -n
00:00.0 0600: 8086:2a00 (rev 0c)
00:02.0 0300: 8086:2a02 (rev 0c)
00:02.1 0380: 8086:2a03 (rev 0c)
00:1a.0 0c03: 8086:2834 (rev 02)
00:1a.1 0c03: 8086:2835 (rev 02)
00:1a.7 0c03: 8086:283a (rev 02)
00:1b.0 0403: 8086:284b (rev 02)
00:1c.0 0604: 8086:283f (rev 02)
00:1c.1 0604: 8086:2841 (rev 02)
00:1c.4 0604: 8086:2847 (rev 02)
00:1d.0 0c03: 8086:2830 (rev 02)
00:1d.1 0c03: 8086:2831 (rev 02)
00:1d.2 0c03: 8086:2832 (rev 02)
00:1d.7 0c03: 8086:2836 (rev 02)
00:1e.0 0604: 8086:2448 (rev f2)
00:1f.0 0601: 8086:2815 (rev 02)
00:1f.1 0101: 8086:2850 (rev 02)
00:1f.2 0106: 8086:2829 (rev 02)
00:1f.3 0c05: 8086:283e (rev 02)
02:09.0 0c00: 1180:0832 (rev 05)
02:09.1 0805: 1180:0822 (rev 22)
02:09.2 0880: 1180:0843 (rev 12)
02:09.3 0880: 1180:0592 (rev 12)
02:09.4 0880: 1180:0852 (rev ff)
09:00.0 0200: 11ab:4354 (rev 12)
0b:00.0 0280: 14e4:4315 (rev 01)

[dtomadon]

Bom dia caro Marcosrokc, no meu pouco conhecimento em linux pelo seu scan modem , aparentemente ha uma placa de som HDA , etá placa também estava no meu scan modem ,a minha máquina é Desktop  o dell inspiron 1525 é um laptop, ou estou enganado. ( essa placa é comum em laptop )
Segundo o membro Alarcon essa placa faz um duplo papel , placa de aúdio e modem ao mesmo tempo; parece ser um modem HDA e está fora dos meus poucos conhecimentos
No meu micro o modem identificado foi um motorola; Smartlynk
Peço um favor envie esses comandos por uma mensagem para o membro "Alarcon " ele é o guru dos modems neste fórum desculpe não poder ajudá-lo com seu problema, mas se conseguir solução do seu problema com o Alarcon notifique este tópico para nosso aprendizado .
Uma boa semana!!!

[alarcon]

Pelo resultado do scanModem me parece que você tem de usar o driver Conexant, então o driver adequado para o Ubuntu 8.04 HArdy Heron 32bits é esse aqui:

http://linux.dell.com/files/ubuntu/hardy/modem-drivers/hsf/hsfmodem_7.68.00.09oem_i386.deb

Coloque na sua pasta de usuário e depois abra um terminal (Aplicações > Acessórios > Consola ou Terminal) e digite:

sudo dpkg -i hsfmodem_7.68.00.09oem_i386.deb

quando for feita perguntas a você pelo terminal, apenas vá dando ENTER e só responda a referente a localidade como sendo BRAZIL com z mesmo.

Se você não tem o discador gnome-ppp instalado aí, baixe-o daqui:

http://mirrors.kernel.org/ubuntu/pool/universe/g/gnome-ppp/gnome-ppp_0.3.23-1_i386.deb

para instalar basta clicar duas vezes sobre o arquivo gnome-ppp_0.3.23-1_i386.deb e digitar sua senha (isso com ele no Ubuntu ok).

Configure com os dados corretos o discador. Seu nome de usuário deve ser o completo com @ e domínio (por exemplo usuario@provedor.com.br) indo nas configurações do gnome-ppp, aba Opções deixe marcada a opção ignorar seqüências de terminal (modo burro). A opção verificar portadora em alguns caso é preciso estar marcada, já em outros não, portanto teste dos dois modos. Na aba Modem, ainda nas configurações do discador gnome-ppp, clique no botão detectar para ele detectar o dispositivo que representa seu modem, mas isso depois de ter instalado o driver conexant ok. Normalmente o dispositivo que representa modems conexant é o /dev/ttySHSF0

Veja também se ao digitar no terminal (menu Aplicações > Acessórios > Consola ou Terminal):

sudo gedit /etc/ppp/pap-secrets

e

sudo gedit /etc/ppp/chap-secrets

no final de cada um destes arquivos tem a informação:

"usuario@provedor.com.br" * "senha1234"

onde as informações entre duas aspas " " são respectivamente o nome de acesso completo do provedor (com @ e domínio) e a senha de acesso do provedor.


Caso seu som fique sem funcionar e o modem funcione, baixe este arquivo:

http://www.linuxant.com/alsa-driver/alsa-driver-linuxant_1.0.16.1-1_all.deb

instale e reinicie o PC para ver se funciona.

OBS: Se você utiliza o Ubuntu 8.04 Hardy Heron 64bits as coisas são mais complicadas em relação a softmodems, portanot recomendaria instalar o Ubuntu 8.04 32bits, agora sei que a DELL fornece driver conexant para 64bits, mas são driver ainda para serem compilados e por tanto mais complicado:

http://linux.dell.com/files/ubuntu/hardy/modem-drivers/hsf/hsfmodem-7.68.00.09x86_64oem.tar.gz

antes de compilar teria de ter instalado nos seu sistema os pacotes:

- make
- gcc
- build-essential
- linux-headers-2.6.24-16-generic

que são necessários ao processo de compilação do driver. Minha recomendação é de que mesmo tendo um PC 64bits, usar o Ubuntu 32bits ao invés do Ubuntu 64bits, principalmente por causa das conexões discadas por softmodems que são poucos com suporte 64bits e se já é difícil fazer um softmodem funcionar em 32bits imagina em 64bits.

[dtomadon]

Valeu "Alarcon " você é o cara , muito obrigado pela ajuda ao nosso colega.!

[marcosrokc]

valeu pela ajuda, vou tentar compilar, já q meu Ubuntu é 64 bits , e te digo se deu ok?
valeu!!!!!

[marcosrokc]

Compilou, compilou, mas não consigo configurar!!!!!!!

[alarcon]

Compilou, compilou, mas não consigo configurar!!!!!!!

Poderia ser mais específico no procedimento que fez?

Você instalou no seu sistema os pacotes:

- make
- gcc
- build-essential
- linux-headers-2.6.24-16-generic

e suas dependências antes de compilar o driver indicado.

Observou se no processo de compilação acusou algum erro?

[marcosrokc]

Ta com todos os pacotes certos!!!
Na verdade vou mudar de versão
vou pedir o CD da 32bits (não tenho paciência pra baixar em net discada)
valeu a ajuda

[marcosrokc]

Pronto, instalei o 32 bits
segui todos os passos
e na hora de discar nao acha o modem de jeito nenhum!!!!!!!!
o que que eu faço?

[alarcon]

Pronto, instalei o 32 bits
segui todos os passos
e na hora de discar nao acha o modem de jeito nenhum!!!!!!!!
o que que eu faço?

É o seguinte, seu modem é esse:

ID 8086:284b
Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)

é um modem HDA (High Definition Audio), ou seja, uma placa de som especial que também faz o papel de modem e então se já era complicado fazer um softmodem (ou winmodem) normal funcionar no linux, imagina um modem deste tipo.

Pelo script scanModem foi indicado o driver Conexant como possível driver, o problema é que no Readme deste driver não encontrei a ID do seu modem para os tipos de modem HDA que ele suporta que lá informa esses aqui:

HDA (High Definition Audio) Modems

   only under 2.6.16 or newer kernels

   HDA VENDOR ID 14F12BFA
   HDA VENDOR ID 14F12C06

e mais estes aqui da Intel, sem fazer referencia a HDA:

INTEL AC-Link Controller (ICH)

   PCI ID 8086:7186
   PCI ID 8086:7196
   PCI ID 8086:2416
   PCI ID 8086:2446
   PCI ID 8086:2486
   PCI ID 8086:24C6
   PCI ID 8086:24D6
   PCI ID 8086:266D
   PCI ID 8086:2426

   PCI ID 10DE:00D9 (NVIDIA nForce3)
   PCI ID 10DE:01C1 (NVIDIA)

portanto pelo readme o driver conexant não suportaria seu modem HDA, mas pelo scanModem ele faz referencia ao driver Conexant:

Many modems for which scanModem fails have Conexant chips.
From http://www.linuxant.com/drivers/modemident.php
get the ListModem tool, which will report on Conexant chipset modems

assim como também faz referencia ao driver Smartlink:

2) An ALSA modem driver plus slmodemd.  Read DOCs/Smartlink.txt for details, and
to test get the package SLMODEMD.gcc4.2.tar.gz from:
   http://linmodems.technion.ac.il/packages/smartlink/

e portanto escolhi o driver conexant para você usar, por que para os modems HDA o uso do driver conexant (desde que suportado por ele é claro) é bem mais fácil de usar, pois requer uma simples instalação do pacote .deb e no caso de se usar o driver smartlink teria ainda que compilar e usá-lo de uma forma não convencional. Só consegui ajudar uma pessoa com modem HDA e o driver Smartlink com sucesso somente uma vez e faz um certo tempo. Nas outras tentativas resultou em completo fracasso.

No driver Smartlink também não encontrei nada sobre IDs de modems HDA que ele suporta. Sei que dá suporte, mas não sei para que tipos de modem HDA o que torna mais trabalhoso.


Pergunto, você instalou o driver conexant como falado nos textos anteriores de forma correta?

[marcosrokc]

sim, instalei tudo do jeito citado!!!!
mas nao deu!!
que mais eu posso tentar fazer??

[marcosrokc]

Ta dando esse erro no modem:

--> Ignoring malformed input line: ";Do NOT edit this file by hand!"
--> WvDial: Internet dialer version 1.60
--> Cannot open /dev/modem: Input/output error
--> Cannot open /dev/modem: Input/output error
--> Cannot open /dev/modem: Input/output error

[marcosrokc]

Agora deu certo
apos instalar o drive de som o moden foi reconhecido
a internet esta mto boa
valeu a todos pela ajuda