Sem som - ATI Technologies Inc SBx00 Azalia (note DELL D531)

Iniciado por maksg, 23 de Dezembro de 2007, 16:58

tópico anterior - próximo tópico

maksg

Olá...

Instalei o Ubuntu 7.10 no notebook mas estou sem som.

Após muito pesquisar pela rede. Muitos Foruns lidos, inclusive este, não consegui fazer a placa de som ATI Technologies Inc SBx00 Azalia no meu notebook DELL Latitude D531 AMD Turion 64 x2 funcionar. E olha que vasculhei a rede toda... e nada... masssssss...como todo brasileiro... nunca desisto.(rs)

Detalhe:
O Ubuntu detecta a placa de som como ATI Technologies Inc SBx00 Azalia.
O Windows detecta a placa de som como SigmaTel High Definition Audio Codec

Outra coisa. Quando clico no ícone do volume é gerada a seguinte mensagem:
NENHUM MÓDULO OU/E DISPOSITIVO DO GSTREAMER DE CONTROLE DE VOLUME FOI ENCONTRADO.

Por favor, meus amigos aqui estão as saídas que consegui, acho que é a informação suficiente para que vcs tenham uma idéia do que possa estar acontecendo.

Fiz todas as atualizações que estavam disponíveis, logo após ter instalado o SO...
O slider de volume está no máximo...
Existe um símbolo vermelho de um x vermelho em cima do ícone do volume na task-bar...

Sei que posso baixar o kernel mais novo (linux-2.6.23.12) para resolver isso. Fiz. Mas gerou tanto erro.... que tive que zerar o processo todo e reinstalar o Ubuntu novamente.

Mas se essa for a única solução, peço a vcs me indiquem um caminho seguro para fazer essa compilação e funcionar na máquina.

Sinceramente? Máquina sem som... não dá !

Espero a ajuda de vcs.

Sds.
maksg


>>>>>>>>>>>>>>>>>>>>>>>>AS SAÍDAS !!!!!


marcia@getsemani:/$ aplay -l
aplay: device_list:204: nenhuma placa de som encontrada...
marcia@getsemani:/$


marcia@getsemani:/$ lspci -v
00:00.0 Host bridge: ATI Technologies Inc RS690 Host Bridge
Subsystem: Dell Unknown device 0206
Flags: bus master, 66MHz, medium devsel, latency 64

00:01.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (Internal gfx) (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, medium devsel, latency 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fe900000-feafffff
Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
Capabilities: <access denied>

00:05.0 PCI bridge: ATI Technologies Inc Unknown device 7915 (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
Memory behind bridge: fe800000-fe8fffff
Capabilities: <access denied>

00:06.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 2) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
Memory behind bridge: fe700000-fe7fffff
Capabilities: <access denied>

00:12.0 SATA controller: ATI Technologies Inc SB600 Non-Raid-5 SATA (prog-if 01 [AHCI 1.0])
Subsystem: Dell Unknown device 0206
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 22
I/O ports at 6eb0 [size=8]
I/O ports at 6eb8
I/O ports at 6ec0 [size=8]
I/O ports at 6ec8
I/O ports at 6ee0 [size=16]
Memory at 54000000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>

00:13.0 USB Controller: ATI Technologies Inc SB600 USB (OHCI0) (prog-if 10 [OHCI])
Subsystem: Dell Unknown device 0206
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16
Memory at ffb00000 (32-bit, non-prefetchable) [size=4K]

00:13.1 USB Controller: ATI Technologies Inc SB600 USB (OHCI1) (prog-if 10 [OHCI])
Subsystem: Dell Unknown device 0206
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17
Memory at ffb01000 (32-bit, non-prefetchable) [size=4K]

00:13.2 USB Controller: ATI Technologies Inc SB600 USB (OHCI2) (prog-if 10 [OHCI])
Subsystem: Dell Unknown device 0206
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18
Memory at ffb02000 (32-bit, non-prefetchable) [size=4K]

00:13.3 USB Controller: ATI Technologies Inc SB600 USB (OHCI3) (prog-if 10 [OHCI])
Subsystem: Dell Unknown device 0206
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17
Memory at ffb03000 (32-bit, non-prefetchable) [size=4K]

00:13.4 USB Controller: ATI Technologies Inc SB600 USB (OHCI4) (prog-if 10 [OHCI])
Subsystem: Dell Unknown device 0206
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18
Memory at ffb04000 (32-bit, non-prefetchable) [size=4K]

00:13.5 USB Controller: ATI Technologies Inc SB600 USB Controller (EHCI) (prog-if 20 [EHCI])
Subsystem: Dell Unknown device 0206
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 20
Memory at ffa80000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>

00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 14)
Subsystem: Dell Unknown device 0206
Flags: 66MHz, medium devsel
I/O ports at 10c0 [size=16]
Capabilities: <access denied>

00:14.1 IDE interface: ATI Technologies Inc SB600 IDE (prog-if 8a [Master SecP PriP])
Subsystem: Dell Unknown device 0206
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16
I/O ports at 01f0 [size=8]
I/O ports at 03f4
I/O ports at 0170 [size=8]
I/O ports at 0374
I/O ports at bfa0 [size=16]

00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia
Subsystem: Dell Unknown device 0206
Flags: slow devsel, IRQ 16
Memory at febfc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>

00:14.3 ISA bridge: ATI Technologies Inc SB600 PCI to LPC Bridge
Subsystem: Dell Unknown device 0206
Flags: bus master, 66MHz, medium devsel, latency 0

00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (prog-if 01 [Subtractive decode])
Flags: bus master, 66MHz, medium devsel, latency 64
Bus: primary=00, secondary=03, subordinate=07, sec-latency=64
I/O behind bridge: 00002000-00002fff
Memory behind bridge: fe600000-fe6fffff
Prefetchable memory behind bridge: 50000000-53ffffff

00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
Flags: fast devsel
Capabilities: <access denied>

00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
Flags: fast devsel

00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
Flags: fast devsel

00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
Flags: fast devsel
Capabilities: <access denied>

01:05.0 VGA compatible controller: ATI Technologies Inc Radeon X1200 Series (prog-if 00 [VGA])
Subsystem: Dell Unknown device 0206
Flags: bus master, fast devsel, latency 64, IRQ 19
Memory at e0000000 (64-bit, prefetchable) [size=256M]
Memory at fe9f0000 (64-bit, non-prefetchable) [size=64K]
I/O ports at ee00 [size=256]
Memory at fea00000 (32-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>

03:01.0 CardBus bridge: O2 Micro, Inc. Cardbus bridge (rev 21)
Subsystem: Dell Unknown device 0206
Flags: bus master, stepping, slow devsel, latency 168, IRQ 23
Memory at fe600000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=03, secondary=04, subordinate=07, sec-latency=176
Memory window 0: 50000000-53fff000 (prefetchable)
Memory window 1: 58000000-5bfff000
I/O window 0: 00002000-000020ff
I/O window 1: 00002400-000024ff
16-bit legacy interface ports at 0001

03:01.4 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02) (prog-if 10 [OHCI])
Subsystem: O2 Micro, Inc. Firewire (IEEE 1394)
Flags: bus master, medium devsel, latency 64, IRQ 23
Memory at fe6ff000 (32-bit, non-prefetchable) [size=4K]
Memory at fe6fe800 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>

09:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5755M Gigabit Ethernet PCI Express (rev 02)
Subsystem: Dell Unknown device 0206
Flags: bus master, fast devsel, latency 0, IRQ 18
Memory at fe7f0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>

0b:00.0 Network controller: Broadcom Corporation BCM94311MCG wlan mini-PCI (rev 01)
Subsystem: Dell Unknown device 0007
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at fe8fc000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>

marcia@getsemani:/$



marcia@getsemani:/$ lspci -nn
00:00.0 Host bridge [0600]: ATI Technologies Inc RS690 Host Bridge [1002:7910]
00:01.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (Internal gfx) [1002:7912]
00:05.0 PCI bridge [0604]: ATI Technologies Inc Unknown device [1002:7915]
00:06.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 2) [1002:7916]
00:12.0 SATA controller [0106]: ATI Technologies Inc SB600 Non-Raid-5 SATA [1002:4380]
00:13.0 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI0) [1002:4387]
00:13.1 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI1) [1002:4388]
00:13.2 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI2) [1002:4389]
00:13.3 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI3) [1002:438a]
00:13.4 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI4) [1002:438b]
00:13.5 USB Controller [0c03]: ATI Technologies Inc SB600 USB Controller (EHCI) [1002:4386]
00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 14)
00:14.1 IDE interface [0101]: ATI Technologies Inc SB600 IDE [1002:438c]
00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia [1002:4383]
00:14.3 ISA bridge [0601]: ATI Technologies Inc SB600 PCI to LPC Bridge [1002:438d]
00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384]
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
01:05.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon X1200 Series [1002:791f]
03:01.0 CardBus bridge [0607]: O2 Micro, Inc. Cardbus bridge [1217:7135] (rev 21)
03:01.4 FireWire (IEEE 1394) [0c00]: O2 Micro, Inc. Firewire (IEEE 1394) [1217:00f7] (rev 02)
09:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5755M Gigabit Ethernet PCI Express [14e4:1673] (rev 02)
0b:00.0 Network controller [0280]: Broadcom Corporation BCM94311MCG wlan mini-PCI [14e4:4311] (rev 01)
marcia@getsemani:/$



marcia@getsemani:/$ modprobe -c | egrep '1002.*4383'
alias pci:v00001002d00004383sv*sd*bc*sc*i* snd_hda_intel
marcia@getsemani:/$


marcia@getsemani:/$ lsmod | grep snd_hda_intel
snd_hda_intel 337192 0
snd_pcm 94344 2 snd_hda_intel,snd_pcm_oss
snd 69288 9 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,sn d_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_de vice
snd_page_alloc 12560 2 snd_hda_intel,snd_pcm
marcia@getsemani:/$

De acordo com o site Guiadohardware.... é a saída de comando que diz qual é o problema ....

marcia@getsemani:/$ dmesg | grep '00:14.2'
[ 26.883786] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16
[ 29.115609] ACPI: PCI interrupt for device 0000:00:14.2 disabled

marcia@getsemani:/$


marcia@getsemani:/$ dmesg | grep hda
[ 16.833271] ide0: BM-DMA at 0xbfa0-0xbfa7, BIOS settings: hdaMA, hdbio
[ 17.576212] hda: HL-DT-ST DVD+/-RW GSA-T11N, ATAPI CD/DVD-ROM drive
[ 17.915699] hda: selected mode 0x42
[ 26.544710] hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 28.109986] hda_intel: azx_get_response timeout, switching to polling mode...
[ 29.113435] hda_intel: azx_get_response timeout, switching to single_cmd mode...
[ 29.113614] hda_codec: No auto-config is available, default to model=ref
[ 29.115300] hda-intel: no codecs initialized
marcia@getsemani:/$

marcia@getsemani:/$ uname -r
2.6.22-14-generic


Tuta

Fala ai amigão!!!

também tenho esse note e tive muita dor de cabeça com o som!!!

E após procurar... procurar e tentar várias coisas que encontrei na net (nenhuma delas com sucesso!!), acabei achando a solução sozinho mesmo apesar de ser iniciante!!!

Faça o seguinte:

Va ate o site da alsa www.alsa-project.org e baixe o "alsa-driver-1.0.15".

Depois de baixado leia o arquivo install... (ai é só seguir os passos ate o 6 item!!)

Depois é só reiniciar!!