Problema na inicialização do num lock no Feisty - 27/4/2007

[rjbgbo]

Bom dia, estou c/ problema na inicialização do num lock no Feisty

Executei os passos:

Como deixar o Num Lock ligado na inicialização do GNOME

    *

      Leia "Notas Gerais"
    *

      Leia "Como adicionar repositórios adicionais"

      sudo apt-get install numlockx
      sudo cp /etc/X11/gdm/Init/Default /etc/X11/gdm/Init/Default_backup
      sudo gedit /etc/X11/gdm/Init/Default

    *

      Procure esta linha:

      ...
      exit 0

    *

      Adicionar as seguintes linhas acima dela:

      if [ -x /usr/bin/numlockx ]; then
       /usr/bin/numlockx on
      fi

    *

      Salve o arquivo editado.
    *

      Leia "Como reiniciar o GNOME sem reiniciar o computador"

fonte: http://ubuntuforums.org/showthread.php?t=399913

Meu teclado é um kit s/ fio teclad0+mouse da Clone, identificado no Gerenciador de Dispositivo como: wireless keyboard+mouse usb

Uso sources.list: http://www.ubuntulinux.nl/source-o-matic p/ Feisty

Desde já agradeço a ajuda de vcs

[Iuri]

manda o arquivo /etc/X11/gdm/Init/Default pra cá, pra eu analisar.

Flw!

[rjbgbo]

manda o arquivo /etc/X11/gdm/Init/Default pra cá, pra eu analisar.

Flw!

Obrigado amigo, segue a cópia do arquivo:

#!/bin/sh
# Stolen from the debian kdm setup, aren't I sneaky
# Plus a lot of fun stuff added
#  -George

PATH=/usr/X11R6/bin:$PATH
OLD_IFS=$IFS

gdmwhich () {
  COMMAND="$1"
  OUTPUT=
  IFS=:
  for dir in $PATH
  do
    if test -x "$dir/$COMMAND" ; then
      if test "x$OUTPUT" = "x" ; then
        OUTPUT="$dir/$COMMAND"
      fi
    fi
  done
  IFS=$OLD_IFS
  echo "$OUTPUT"
}


sysmodmap=/etc/X11/Xmodmap

XMODMAP=`gdmwhich xmodmap`
if [ x$XMODMAP != x ] ; then
  if [ x$GDM_PARENT_DISPLAY = x ]; then
    if [ -f $sysmodmap ]; then
      $XMODMAP $sysmodmap
    fi
  else
    ( DISPLAY=$GDM_PARENT_DISPLAY XAUTHORITY=$GDM_PARENT_XAUTHORITY $XMODMAP -pke ) | $XMODMAP -
  fi

  #
  # Switch Sun's Alt and Meta mod mappings
  #

  UNAME=`gdmwhich uname`
  PROCESSOR=`$UNAME -p`
  if [ x$PROCESSOR = xsparc ]; then
    if $XMODMAP | /usr/bin/grep mod4 | /usr/bin/grep Alt > /dev/null 2>/dev/null
    then
      $XMODMAP -e "clear Mod1" \
               -e "clear Mod4" \
               -e "add Mod1 = Alt_L" \
               -e "add Mod1 = Alt_R" \
               -e "add Mod4 = Meta_L" \
               -e "add Mod4 = Meta_R"
    fi
  fi
fi

SETXKBMAP=`gdmwhich setxkbmap`
if [ x$SETXKBMAP != x ] ; then
  # FIXME: is this all right?  Is this completely on crack?
  # What this does is move the xkb configuration from the GDM_PARENT_DISPLAY
  # FIXME: This should be done in code.  Or there must be an easier way ...
  if [ -n "$GDM_PARENT_DISPLAY" ]; then
    XKBSETUP=`( DISPLAY=$GDM_PARENT_DISPLAY XAUTHORITY=$GDM_PARENT_XAUTHORITY $SETXKBMAP -v )`
    if [ -n "$XKBSETUP" ]; then
      XKBKEYMAP=`echo "$XKBSETUP" | grep '^keymap' | awk '{ print $2 }'`
      XKBTYPES=`echo "$XKBSETUP" | grep '^types' | awk '{ print $2 }'`
      XKBCOMPAT=`echo "$XKBSETUP" | grep '^compat' | awk '{ print $2 }'`
      XKBSYMBOLS=`echo "$XKBSETUP" | grep '^symbols' | awk '{ print $2 }'`
      XKBGEOMETRY=`echo "$XKBSETUP" | grep '^geometry' | awk '{ print $2 }'`
      if [ -n "$XKBKEYMAP" ]; then
        $SETXKBMAP -keymap "$XKBKEYMAP"
      elif [ -n "$XKBTYPES" -a -n "$XKBCOMPAT" -a -n "$XKBSYMBOLS" -a -n "$XKBGEOMETRY" ]; then
        $SETXKBMAP -types "$XKBTYPES" -compat "$XKBCOMPAT" -symbols "$XKBSYMBOLS" -geometry "$XKBGEOMETRY"
      elif [ -n "$XKBTYPES" -a -n "$XKBCOMPAT" -a -n "$XKBSYMBOLS" ]; then
        $SETXKBMAP -types "$XKBTYPES" -compat "$XKBCOMPAT" -symbols "$XKBSYMBOLS"
      elif [ -n "$XKBSYMBOLS" ]; then
        $SETXKBMAP -symbols "$XKBSYMBOLS"
      fi
    fi
  fi
fi

exit 0

[Iuri]

Digite no terminal: sudo gedit /etc/X11/gdm/Init/Default

Agora substitua o texto dele por esse:

#!/bin/sh
# Stolen from the debian kdm setup, aren't I sneaky
# Plus a lot of fun stuff added
#  -George

PATH=/usr/X11R6/bin:$PATH
OLD_IFS=$IFS

gdmwhich () {
  COMMAND="$1"
  OUTPUT=
  IFS=:
  for dir in $PATH
  do
    if test -x "$dir/$COMMAND" ; then
      if test "x$OUTPUT" = "x" ; then
        OUTPUT="$dir/$COMMAND"
      fi
    fi
  done
  IFS=$OLD_IFS
  echo "$OUTPUT"
}


sysmodmap=/etc/X11/Xmodmap

XMODMAP=`gdmwhich xmodmap`
if [ x$XMODMAP != x ] ; then
  if [ x$GDM_PARENT_DISPLAY = x ]; then
    if [ -f $sysmodmap ]; then
      $XMODMAP $sysmodmap
    fi
  else
    ( DISPLAY=$GDM_PARENT_DISPLAY XAUTHORITY=$GDM_PARENT_XAUTHORITY $XMODMAP -pke ) | $XMODMAP -
  fi

  #
  # Switch Sun's Alt and Meta mod mappings
  #

  UNAME=`gdmwhich uname`
  PROCESSOR=`$UNAME -p`
  if [ x$PROCESSOR = xsparc ]; then
    if $XMODMAP | /usr/bin/grep mod4 | /usr/bin/grep Alt > /dev/null 2>/dev/null
    then
      $XMODMAP -e "clear Mod1" \
               -e "clear Mod4" \
               -e "add Mod1 = Alt_L" \
               -e "add Mod1 = Alt_R" \
               -e "add Mod4 = Meta_L" \
               -e "add Mod4 = Meta_R"
    fi
  fi
fi

SETXKBMAP=`gdmwhich setxkbmap`
if [ x$SETXKBMAP != x ] ; then
  # FIXME: is this all right?  Is this completely on crack?
  # What this does is move the xkb configuration from the GDM_PARENT_DISPLAY
  # FIXME: This should be done in code.  Or there must be an easier way ...
  if [ -n "$GDM_PARENT_DISPLAY" ]; then
    XKBSETUP=`( DISPLAY=$GDM_PARENT_DISPLAY XAUTHORITY=$GDM_PARENT_XAUTHORITY $SETXKBMAP -v )`
    if [ -n "$XKBSETUP" ]; then
      XKBKEYMAP=`echo "$XKBSETUP" | grep '^keymap' | awk '{ print $2 }'`
      XKBTYPES=`echo "$XKBSETUP" | grep '^types' | awk '{ print $2 }'`
      XKBCOMPAT=`echo "$XKBSETUP" | grep '^compat' | awk '{ print $2 }'`
      XKBSYMBOLS=`echo "$XKBSETUP" | grep '^symbols' | awk '{ print $2 }'`
      XKBGEOMETRY=`echo "$XKBSETUP" | grep '^geometry' | awk '{ print $2 }'`
      if [ -n "$XKBKEYMAP" ]; then
        $SETXKBMAP -keymap "$XKBKEYMAP"
      elif [ -n "$XKBTYPES" -a -n "$XKBCOMPAT" -a -n "$XKBSYMBOLS" -a -n "$XKBGEOMETRY" ]; then
        $SETXKBMAP -types "$XKBTYPES" -compat "$XKBCOMPAT" -symbols "$XKBSYMBOLS" -geometry "$XKBGEOMETRY"
      elif [ -n "$XKBTYPES" -a -n "$XKBCOMPAT" -a -n "$XKBSYMBOLS" ]; then
        $SETXKBMAP -types "$XKBTYPES" -compat "$XKBCOMPAT" -symbols "$XKBSYMBOLS"
      elif [ -n "$XKBSYMBOLS" ]; then
        $SETXKBMAP -symbols "$XKBSYMBOLS"
      fi
    fi
  fi
fi
if [ -x /usr/bin/numlockx ]; then
       /usr/bin/numlockx on
      fi
exit 0

Não se esqueça de salvar.

Espero ter ajudado.

Flw!