Modem 3G Huawei e156 CTBC não funiona no Ubuntu 12.04 nem no 12.10

Butuntu · 26 de Outubro de 2012, 14:53

Olá gente,

Tenho um modem 3g Huawei e156 da operadora CTBC. Com o firmware fornecido pela CTBC esse modem não funciona no Ubuntu 12.04 nem no 12.10.
Se eu instalar o firmware mais novo, fornecido pelo site da Huawei, o modem funciona, mas o firmware fornecido pelo site da Huawei tem problemas com alguns downloads por exemplo. Alguém sabe fazer o modem funcionar no Ubuntu com o firmware fornecido pelo site da CTBC?

Agradeço desde já.

zekkerj · 26 de Outubro de 2012, 18:30

Como vc faz pra trocar o firmware do modem?

nuno_nunes · 26 de Outubro de 2012, 21:59

Já tentou fazer o gestor de ligação e meter o apn correcto, pois eu tenho um modem E173S e eu configurei o apn da operdora que eu uso e nunca deu erro

Butuntu · 26 de Outubro de 2012, 22:10

Citação de: zekkerj online 26 de Outubro de 2012, 18:30
Como vc faz pra trocar o firmware do modem?

zekkerj, eu faço o procedimento normal que é descrito no site da CTBC e da Huawei. Baixo arquivo do firmware, fecho o programado discador do modem, desconecto fisicamente todos os dispositivos USB, exceto o modem e o mouse, dou dois cliques no arquivo do firmware e vou dando OK.

Butuntu · 26 de Outubro de 2012, 22:12

zekkerj, esqueci de dizer: o procedimento de instalação do firmware só pode ser feito no Windows.

Butuntu · 26 de Outubro de 2012, 22:20

Citação de: nuno_nunes online 26 de Outubro de 2012, 21:59
Já tentou fazer o gestor de ligação e meter o apn correcto, pois eu tenho um modem E173S e eu configurei o apn da operdora que eu uso e nunca deu erro

Nuno, o gestor de ligação que vc está falando é esse gestor padrão, em ambiente gráfico, que fica no canto superior direito da tela perto do rélógio e do controle de som?

Já tentei configurar tudo manualmente nesse gestor de ligação que eu falei, inclusive o APN e o DNS corretos. Nas versões mais recentes do Ubuntu o modem só é reconhecido no gestor quando uso o firmware ruim, que é o do site da Huawei.

nuno_nunes · 27 de Outubro de 2012, 07:10

Citação de: Butuntu online 26 de Outubro de 2012, 22:20
Citação de: nuno_nunes online 26 de Outubro de 2012, 21:59
Já tentou fazer o gestor de ligação e meter o apn correcto, pois eu tenho um modem E173S e eu configurei o apn da operdora que eu uso e nunca deu erro

Nuno, o gestor de ligação que vc está falando é esse gestor padrão, em ambiente gráfico, que fica no canto superior direito da tela perto do rélógio e do controle de som?

Já tentei configurar tudo manualmente nesse gestor de ligação que eu falei, inclusive o APN e o DNS corretos. Nas versões mais recentes do Ubuntu o modem só é reconhecido no gestor quando uso o firmware ruim, que é o do site da Huawei.

Eu no meu só configurei o apn no meu linux da minha operadora e nada mais e está a trabalhar muito bem

Butuntu · 27 de Outubro de 2012, 15:00

Ao digitar LSUSB no Terminal usando o firmware bom (do site da CTBC) no Ubuntu 12.04, aparece:

ubuntu@ubuntu:~$
ubuntu@ubuntu:~$
ubuntu@ubuntu:~$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 13fe:1d00 Kingston Technology Company Inc. DataTraveler
2.0 1GB/4GB Flash Drive / Patriot Xporter 4GB Flash Drive
Bus 001 Device 005: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem
/ E230/E270/E870 HSDPA/HSUPA Modem
Bus 004 Device 002: ID 0079:0006 DragonRise Inc. Generic USB Joystick
Bus 004 Device 003: ID 0079:0006 DragonRise Inc. Generic USB Joystick
Bus 005 Device 003: ID 1c4f:0003 SiGma Micro HID controller
ubuntu@ubuntu:~$
ubuntu@ubuntu:~$

Butuntu · 27 de Outubro de 2012, 15:03

Ao digitar DMESG no Terminal usando o firmware bom (do site da CTBC) no Ubuntu 12.04, aparece:

[ 2.033527] ACPI: bus type pnp registered
[ 2.033625] pnp 00:00: [bus 00-ff]
[ 2.033629] pnp 00:00: [io 0x0cf8-0x0cff]
[ 2.033631] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 2.033634] pnp 00:00: [io 0x0d00-0xffff window]
[ 2.033636] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 2.033638] pnp 00:00: [mem 0x00000000 window]
[ 2.033640] pnp 00:00: [mem 0xd0000000-0xffffffff window]
[ 2.033708] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03
(active)
[ 2.033742] pnp 00:01: [mem 0xfed14000-0xfed19fff]
[ 2.033744] pnp 00:01: [mem 0xf0000000-0xf7ffffff]
[ 2.033806] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[ 2.033809] system 00:01: [mem 0xf0000000-0xf7ffffff] has been reserved
[ 2.033812] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 2.033939] pnp 00:02: [io 0x0800-0x087f]
[ 2.033941] pnp 00:02: [io 0x0480-0x04bf]
[ 2.033943] pnp 00:02: [mem 0xfec00000-0xfec00fff]
[ 2.033945] pnp 00:02: [mem 0xfee00000-0xfee00fff]
[ 2.033947] pnp 00:02: [mem 0xfed1c000-0xfed1ffff]
[ 2.033949] pnp 00:02: [mem 0xfed20000-0xfed8ffff]
[ 2.033951] pnp 00:02: [mem 0xff000000-0xffffffff]
[ 2.033991] system 00:02: [io 0x0800-0x087f] has been reserved
[ 2.033994] system 00:02: [io 0x0480-0x04bf] has been reserved
[ 2.033997] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 2.034000] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
[ 2.034002] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 2.034005] system 00:02: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 2.034007] system 00:02: [mem 0xff000000-0xffffffff] could not be reserved
[ 2.034010] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.034128] pnp 00:03: [io 0x0000-0xffffffffffffffff disabled]
[ 2.034131] pnp 00:03: [io 0x0778-0x077f]
[ 2.034170] system 00:03: [io 0x0778-0x077f] has been reserved
[ 2.034173] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.034195] pnp 00:04: [io 0x0060]
[ 2.034197] pnp 00:04: [io 0x0064]
[ 2.034211] pnp 00:04: [irq 1]
[ 2.034246] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b
(active)
[ 2.034523] pnp 00:05: [io 0x03f0-0x03f5]
[ 2.034525] pnp 00:05: [io 0x03f7]
[ 2.034531] pnp 00:05: [irq 6]
[ 2.034533] pnp 00:05: [dma 2]
[ 2.034586] pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active)
[ 2.034812] pnp 00:06: [io 0x03f8-0x03ff]
[ 2.034817] pnp 00:06: [irq 4]
[ 2.034819] pnp 00:06: [dma 0 disabled]
[ 2.034889] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 2.035189] pnp 00:07: [io 0x0378-0x037f]
[ 2.035196] pnp 00:07: [irq 5]
[ 2.035198] pnp 00:07: [dma 0 disabled]
[ 2.035335] pnp 00:07: Plug and Play ACPI device, IDs PNP0400 (active)
[ 2.035347] pnp 00:08: [dma 4]
[ 2.035349] pnp 00:08: [io 0x0000-0x000f]
[ 2.035351] pnp 00:08: [io 0x0081-0x0083]
[ 2.035353] pnp 00:08: [io 0x0087]
[ 2.035354] pnp 00:08: [io 0x0089-0x008b]
[ 2.035356] pnp 00:08: [io 0x008f]
[ 2.035358] pnp 00:08: [io 0x00c0-0x00df]
[ 2.035388] pnp 00:08: Plug and Play ACPI device, IDs PNP0200 (active)
[ 2.035424] pnp 00:09: [io 0x0070-0x0071]
[ 2.035453] pnp 00:09: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 2.035461] pnp 00:0a: [io 0x0061]
[ 2.035493] pnp 00:0a: Plug and Play ACPI device, IDs PNP0800 (active)
[ 2.035508] pnp 00:0b: [io 0x0010-0x001f]
[ 2.035510] pnp 00:0b: [io 0x0022-0x003f]
[ 2.035512] pnp 00:0b: [io 0x0044-0x005f]
[ 2.035514] pnp 00:0b: [io 0x0062-0x0063]
[ 2.035516] pnp 00:0b: [io 0x0065-0x006f]
[ 2.035517] pnp 00:0b: [io 0x0072-0x007f]
[ 2.035519] pnp 00:0b: [io 0x0080]
[ 2.035521] pnp 00:0b: [io 0x0084-0x0086]
[ 2.035523] pnp 00:0b: [io 0x0088]
[ 2.035524] pnp 00:0b: [io 0x008c-0x008e]
[ 2.035526] pnp 00:0b: [io 0x0090-0x009f]
[ 2.035528] pnp 00:0b: [io 0x00a2-0x00bf]
[ 2.035530] pnp 00:0b: [io 0x00e0-0x00ef]
[ 2.035531] pnp 00:0b: [io 0x04d0-0x04d1]
[ 2.035593] system 00:0b: [io 0x04d0-0x04d1] has been reserved
[ 2.035596] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.035605] pnp 00:0c: [io 0x00f0-0x00ff]
[ 2.035610] pnp 00:0c: [irq 13]
[ 2.035640] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 2.035754] pnp 00:0d: [irq 0 disabled]
[ 2.035758] pnp 00:0d: [irq 8]
[ 2.035760] pnp 00:0d: [mem 0xfed00000-0xfed003ff]
[ 2.035801] pnp 00:0d: Plug and Play ACPI device, IDs PNP0103 (active)
[ 2.035929] pnp: PnP ACPI: found 14 devices
[ 2.035931] ACPI: ACPI bus type pnp unregistered
[ 2.035937] PnPBIOS: Disabled by ACPI PNP
[ 2.072320] PCI: max bus depth: 1 pci_try_num: 2
[ 2.072356] pci 0000:00:1c.0: BAR 14: assigned [mem 0xe3200000-0xe33fffff]
[ 2.072360] pci 0000:00:1c.0: BAR 15: assigned [mem 0xe3400000-0xe35fffff
64bit pref]
[ 2.072364] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 2.072367] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 2.072369] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 2.072373] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xe30fffff]
[ 2.072379] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 2.072381] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 2.072386] pci 0000:00:1c.0: bridge window [mem 0xe3200000-0xe33fffff]
[ 2.072390] pci 0000:00:1c.0: bridge window [mem 0xe3400000-0xe35fffff
64bit pref]
[ 2.072396] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
[ 2.072422] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.072426] pci 0000:00:01.0: setting latency timer to 64
[ 2.072433] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.072437] pci 0000:00:1c.0: setting latency timer to 64
[ 2.072443] pci 0000:00:1e.0: setting latency timer to 64
[ 2.072447] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 2.072449] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 2.072451] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 2.072453] pci_bus 0000:00: resource 7 [mem 0xd0000000-0xffffffff]
[ 2.072455] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 2.072457] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xe30fffff]
[ 2.072460] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 2.072462] pci_bus 0000:02: resource 1 [mem 0xe3200000-0xe33fffff]
[ 2.072464] pci_bus 0000:02: resource 2 [mem 0xe3400000-0xe35fffff 64bit
pref]
[ 2.072467] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 2.072469] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 2.072471] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 2.072473] pci_bus 0000:03: resource 7 [mem 0xd0000000-0xffffffff]
[ 2.072512] NET: Registered protocol family 2
[ 2.072580] IP route cache hash table entries: 32768 (order: 5, 131072
bytes)
[ 2.072782] TCP established hash table entries: 131072 (order: 8, 1048576
bytes)
[ 2.073076] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 2.073241] TCP: Hash tables configured (established 131072 bind 65536)
[ 2.073243] TCP reno registered
[ 2.073245] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 2.073252] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 2.073323] NET: Registered protocol family 1
[ 2.073361] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.073378] pci 0000:00:1d.0: PCI INT A disabled
[ 2.073388] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.073403] pci 0000:00:1d.1: PCI INT B disabled
[ 2.073413] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.073428] pci 0000:00:1d.2: PCI INT C disabled
[ 2.073435] pci 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 2.073451] pci 0000:00:1d.3: PCI INT D disabled
[ 2.073459] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.100041] pci 0000:00:1d.7: PCI INT A disabled
[ 2.100070] pci 0000:01:00.0: Boot video device
[ 2.100081] PCI: CLS 64 bytes, default 64
[ 2.100394] audit: initializing netlink socket (disabled)
[ 2.100404] type=2000 audit(1343211238.096:1): initialized
[ 2.126932] highmem bounce pool size: 64 pages
[ 2.126938] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.142994] VFS: Disk quotas dquot_6.5.2
[ 2.143067] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.143576] fuse init (API version 7.17)
[ 2.143659] msgmni has been set to 1618
[ 2.143922] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
253)
[ 2.143945] io scheduler noop registered
[ 2.143947] io scheduler deadline registered
[ 2.143953] io scheduler cfq registered (default)
[ 2.144072] pcieport 0000:00:01.0: setting latency timer to 64
[ 2.144103] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 2.144170] pcieport 0000:00:1c.0: setting latency timer to 64
[ 2.144205] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 2.144312] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 2.144314] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 2.144316] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
[ 2.144319] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 2.144336] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 2.144340] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 2.144357] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.144390] pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 27d0
ss_vid 8086 ss_did d612
[ 2.144408] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
[ 2.144415] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.144478] intel_idle: MWAIT substates: 0x22220
[ 2.144479] intel_idle: does not run on family 6 model 23
[ 2.144557] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 2.144563] ACPI: Power Button [PWRB]
[ 2.144606] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 2.144609] ACPI: Power Button [PWRF]
[ 2.146527] ERST: Table is not found!
[ 2.146529] GHES: HEST is not enabled!
[ 2.146603] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 2.166975] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.167111] isapnp: Scanning for PnP cards...
[ 2.520115] isapnp: No Plug & Play device found
[ 2.807945] Freeing initrd memory: 14528k freed
[ 2.928627] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.944435] Linux agpgart interface v0.103
[ 2.945988] brd: module loaded
[ 2.946730] loop: module loaded
[ 2.946887] ata_piix 0000:00:1f.1: version 2.13
[ 2.946900] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ
18
[ 2.946935] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 2.947236] scsi0 : ata_piix
[ 2.947312] scsi1 : ata_piix
[ 2.948300] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf0f0 irq 14
[ 2.948303] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf0f8 irq 15
[ 2.948320] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ
19
[ 2.948325] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 2.948346] ata2: port disabled--ignoring
[ 2.948358] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 2.948707] scsi2 : ata_piix
[ 2.948772] scsi3 : ata_piix
[ 2.949884] ata3: SATA max UDMA/133 cmd 0xf0e0 ctl 0xf0d0 bmdma 0xf0a0 irq
19
[ 2.949886] ata4: SATA max UDMA/133 cmd 0xf0c0 ctl 0xf0b0 bmdma 0xf0a8 irq
19
[ 2.950239] Fixed MDIO Bus: probed
[ 2.950258] tun: Universal TUN/TAP device driver, 1.6
[ 2.950260] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 2.950312] PPP generic driver version 2.4.2
[ 2.950413] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.950429] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ
23
[ 2.950441] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.950444] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.950488] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
number 1
[ 2.950504] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 2.950513] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.954387] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 2.954401] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe3104000
[ 2.968022] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.968237] hub 1-0:1.0: USB hub found
[ 2.968241] hub 1-0:1.0: 8 ports detected
[ 2.968321] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.968333] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.968350] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ
23
[ 2.968356] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.968359] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.968400] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 2
[ 2.968421] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f080
[ 2.968532] hub 2-0:1.0: USB hub found
[ 2.968535] hub 2-0:1.0: 2 ports detected
[ 2.968591] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ
19
[ 2.968597] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.968600] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.968638] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 3
[ 2.968660] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f060
[ 2.968773] hub 3-0:1.0: USB hub found
[ 2.968776] hub 3-0:1.0: 2 ports detected
[ 2.968832] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ
18
[ 2.968838] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.968841] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.968878] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 4
[ 2.968907] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f040
[ 2.969020] hub 4-0:1.0: USB hub found
[ 2.969024] hub 4-0:1.0: 2 ports detected
[ 2.969079] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ
16
[ 2.969085] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2.969088] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.969128] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus
number 5
[ 2.969157] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000f020
[ 2.969267] hub 5-0:1.0: USB hub found
[ 2.969271] hub 5-0:1.0: 2 ports detected
[ 2.969367] usbcore: registered new interface driver libusual
[ 2.969413] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 2.969415] i8042: PNP: PS/2 appears to have AUX port disabled, if this is
incorrect please boot with i8042.nopnp

Butuntu · 27 de Outubro de 2012, 15:04

Continuando:

[ 2.969901] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.969996] mousedev: PS/2 mouse device common for all mice
[ 2.970138] rtc_cmos 00:09: RTC can wake from S4
[ 2.970233] rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
[ 2.970255] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 2.970308] device-mapper: uevent: version 1.0.3
[ 2.970378] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised:
dm-devel@redhat.com
[ 2.970406] EISA: Probing bus 0 at eisa.0
[ 2.970409] EISA: Cannot allocate resource for mainboard
[ 2.970411] Cannot allocate resource for EISA slot 1
[ 2.970412] Cannot allocate resource for EISA slot 2
[ 2.970414] Cannot allocate resource for EISA slot 3
[ 2.970416] Cannot allocate resource for EISA slot 4
[ 2.970417] Cannot allocate resource for EISA slot 5
[ 2.970419] Cannot allocate resource for EISA slot 6
[ 2.970421] Cannot allocate resource for EISA slot 7
[ 2.970422] Cannot allocate resource for EISA slot 8
[ 2.970424] EISA: Detected 0 cards.
[ 2.970431] cpufreq-nforce2: No nForce2 chipset.
[ 2.970433] cpuidle: using governor ladder
[ 2.970435] cpuidle: using governor menu
[ 2.970437] EFI Variables Facility v0.08 2004-May-17
[ 2.970674] TCP cubic registered
[ 2.970795] NET: Registered protocol family 10
[ 2.971304] NET: Registered protocol family 17
[ 2.971317] Registering the dns_resolver key type
[ 2.971338] Using IPI No-Shortcut mode
[ 2.971436] PM: Hibernation image not present or could not be loaded.
[ 2.971447] registered taskstats version 1
[ 2.983554] Magic number: 4:113:225
[ 2.983640] rtc_cmos 00:09: setting system clock to 2012-07-25 10:13:59 UTC
(1343211239)
[ 2.984051] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.984053] EDD information not available.
[ 2.989329] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input2
[ 3.100018] Refined TSC clocksource calibration: 2599.958 MHz.
[ 3.100025] Switching to clocksource tsc
[ 3.128284] ata3.00: ATA-7: SAMSUNG HD502HI, 1AG01118, max UDMA7
[ 3.128291] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 3.128301] ata3.01: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN00, max UDMA/100
[ 3.136251] ata3.00: configured for UDMA/133
[ 3.152133] ata3.01: configured for UDMA/100
[ 3.154504] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD502HI 1AG0
PQ: 0 ANSI: 5
[ 3.154610] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465
GiB)
[ 3.154640] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 3.154650] sd 2:0:0:0: [sda] Write Protect is off
[ 3.154653] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.154670] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 3.158231] scsi 2:0:1:0: CD-ROM HL-DT-ST DVDRAM GH22NS50 TN00
PQ: 0 ANSI: 5
[ 3.183386] sr0: scsi3-mmc drive: 10x/10x writer dvd-ram cd/rw xa/form2 cdda
tray
[ 3.183392] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.183555] sr 2:0:1:0: Attached scsi CD-ROM sr0
[ 3.183610] sr 2:0:1:0: Attached scsi generic sg1 type 5
[ 3.222290] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[ 3.222765] sd 2:0:0:0: [sda] Attached SCSI disk
[ 3.222822] Freeing unused kernel memory: 740k freed
[ 3.223074] Write protecting the kernel text: 5828k
[ 3.223088] Write protecting the kernel read-only data: 2376k
[ 3.223090] NX-protecting the kernel data: 4412k
[ 3.239620] udevd[98]: starting version 175
[ 3.280061] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 3.297773] wmi: Mapper loaded
[ 3.302704] [drm] Initialized drm 1.1.0 20060810
[ 3.312414] VGA switcheroo: detected Optimus DSM method \ handle
[ 3.312446] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.312452] nouveau 0000:01:00.0: setting latency timer to 64
[ 3.317315] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card
(0x0a5000a2)
[ 3.321735] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from
PRAMIN
[ 3.390451] FDC 0 is a post-1991 82077
[ 3.405115] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 3.405119] [drm] nouveau 0000:01:00.0: BIT BIOS found
[ 3.405122] [drm] nouveau 0000:01:00.0: Bios version 70.16.2e.00
[ 3.405125] [drm] nouveau 0000:01:00.0: TMDS table version 2.0
[ 3.405128] [drm] nouveau 0000:01:00.0: Found Display Configuration Block
version 4.0
[ 3.405131] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000302 00020030
[ 3.405134] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02000300 00000000
[ 3.405136] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 01032310 00000000
[ 3.405138] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 02021362 00020010
[ 3.405141] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16
4
[ 3.405144] [drm] nouveau 0000:01:00.0: 0: 0x00001030: type 0x30 idx 0 tag
0x07
[ 3.405146] [drm] nouveau 0000:01:00.0: 1: 0x00002161: type 0x61 idx 1 tag
0x08
[ 3.405149] [drm] nouveau 0000:01:00.0: 2: 0x00000200: type 0x00 idx 2 tag
0xff
[ 3.405153] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset
0xD3F5
[ 3.448671] Initializing USB Mass Storage driver...
[ 3.448894] scsi4 : usb-storage 1-1:1.0
[ 3.448962] usbcore: registered new interface driver usb-storage
[ 3.448964] USB Mass Storage support registered.
[ 3.465680] [drm] nouveau 0000:01:00.0: 0xD717: Condition still not met
after 20ms, skipping following opcodes
[ 3.485526] [drm] nouveau 0000:01:00.0: 0xD71B: Condition still not met
after 20ms, skipping following opcodes
[ 3.485546] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset
0xD905
[ 3.491862] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset
0xE78C
[ 3.491869] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset
0xE7CA
[ 3.534410] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset
0xEA0A
[ 3.534413] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset
0xEA6F
[ 3.554253] [drm] nouveau 0000:01:00.0: 0xEA6F: Condition still not met
after 20ms, skipping following opcodes
[ 3.700016] usb 1-7: new high-speed USB device number 5 using ehci_hcd
[ 3.848699] scsi7 : usb-storage 1-7:1.2
[ 3.852014] scsi8 : usb-storage 1-7:1.3
[ 4.032047] [drm] nouveau 0000:01:00.0: 3 available performance level(s)
[ 4.032052] [drm] nouveau 0000:01:00.0: 0: core 135MHz shader 270MHz memory
135MHz timing 2 voltage 850mV
[ 4.032056] [drm] nouveau 0000:01:00.0: 1: core 405MHz shader 810MHz memory
324MHz timing 1 voltage 900mV
[ 4.032059] [drm] nouveau 0000:01:00.0: 3: core 625MHz shader 1360MHz memory
400MHz timing 0 voltage 1000mV
[ 4.032088] [drm] nouveau 0000:01:00.0: c: core 405MHz shader 810MHz memory
324MHz voltage 900mV
[ 4.034986] [TTM] Zone kernel: Available graphics memory: 421918 kiB.
[ 4.034988] [TTM] Zone highmem: Available graphics memory: 2056730 kiB.
[ 4.034990] [TTM] Initializing pool allocator.
[ 4.034999] [drm] nouveau 0000:01:00.0: Detected 1024MiB VRAM
[ 4.035972] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[ 4.084440] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 4.084443] [drm] No driver support for vblank timestamp query.
[ 4.148020] usb 4-1: new low-speed USB device number 2 using uhci_hcd
[ 4.241759] [drm] nouveau 0000:01:00.0: allocated 1600x900 fb: 0x320000, bo
f749b200
[ 4.241819] fbcon: nouveaufb (fb0) is primary device
[ 4.289302] Console: switching to colour frame buffer device 200x56
[ 4.291072] fb0: nouveaufb frame buffer device
[ 4.291073] drm: registered panic notifier
[ 4.291079] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on
minor 0
[ 4.334522] usbcore: registered new interface driver usbhid
[ 4.334524] usbhid: USB HID core driver
[ 4.449482] scsi 4:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP
PQ: 0 ANSI: 0 CCS
[ 4.450485] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 4.450962] sd 4:0:0:0: [sdb] 1955840 512-byte logical blocks: (1.00 GB/955
MiB)
[ 4.452181] sd 4:0:0:0: [sdb] Write Protect is off
[ 4.452184] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 4.452709] sd 4:0:0:0: [sdb] No Caching mode page present
[ 4.452711] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 4.455333] sd 4:0:0:0: [sdb] No Caching mode page present
[ 4.455336] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 4.460020] sdb: sdb1
[ 4.463086] sd 4:0:0:0: [sdb] No Caching mode page present
[ 4.463089] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 4.463092] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 4.512212] Btrfs loaded
[ 4.517020] xor: automatically using best checksumming function: pIII_sse
[ 4.535993] pIII_sse : 9956.000 MB/sec
[ 4.536005] xor: using function: pIII_sse (9956.000 MB/sec)
[ 4.536548] device-mapper: dm-raid45: initialized v0.2594b
[ 4.572033] usb 4-2: new low-speed USB device number 3 using uhci_hcd
[ 4.851372] scsi 7:0:0:0: CD-ROM HUAWEI Mass Storage 2.31
PQ: 0 ANSI: 2
[ 4.856497] scsi 8:0:0:0: Direct-Access HUAWEI MMC Storage 2.31
PQ: 0 ANSI: 2
[ 4.865347] sr1: scsi-1 drive
[ 4.865565] sr 7:0:0:0: Attached scsi CD-ROM sr1
[ 4.865633] sr 7:0:0:0: Attached scsi generic sg3 type 5
[ 4.865839] sd 8:0:0:0: Attached scsi generic sg4 type 0
[ 4.874474] sd 8:0:0:0: [sdc] Attached SCSI removable disk
[ 4.996019] usb 5-2: new low-speed USB device number 2 using uhci_hcd
[ 5.185686] input: SIGMACHIP Usb Mouse as
/devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.0/input/input3
[ 5.185812] generic-usb 0003:1C4F:0003.0003: input,hidraw0: USB HID v1.10
Mouse [SIGMACHIP Usb Mouse] on usb-0000:00:1d.3-2/input0
[ 5.529985] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts:
(null)
[ 5.721081] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts:
(null)
[ 6.082483] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 8.832063] usb 5-2: USB disconnect, device number 2
[ 10.312029] usb 5-2: new low-speed USB device number 3 using uhci_hcd
[ 10.501627] input: SIGMACHIP Usb Mouse as
/devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.0/input/input4
[ 10.501758] generic-usb 0003:1C4F:0003.0004: input,hidraw0: USB HID v1.10
Mouse [SIGMACHIP Usb Mouse] on usb-0000:00:1d.3-2/input0
[ 19.724185] udevd[1320]: starting version 175
[ 19.725881] Adding 2144640k swap on /dev/sda6. Priority:-1 extents:1
across:2144640k
[ 20.859850] device-mapper: multipath: version 1.3.0 loaded
[ 20.906307] lp: driver loaded but no devices found
[ 20.976472] parport_pc 00:07: reported by Plug and Play ACPI
[ 20.976518] parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE]
[ 20.977990] ppdev: user-space parallel port driver
[ 21.019969] Bluetooth: Core ver 2.16
[ 21.019989] NET: Registered protocol family 31
[ 21.019991] Bluetooth: HCI device and connection manager initialized
[ 21.020016] Bluetooth: HCI socket layer initialized
[ 21.020018] Bluetooth: L2CAP socket layer initialized
[ 21.020098] Bluetooth: SCO socket layer initialized
[ 21.061084] input: DragonRise Inc. Generic USB Joystick as
/devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input5
[ 21.061384] dragonrise 0003:0079:0006.0001: input,hidraw1: USB HID v1.10
Joystick [DragonRise Inc. Generic USB Joystick ] on
usb-0000:00:1d.2-1/input0
[ 21.061394] dragonrise 0003:0079:0006.0001: Force Feedback for DragonRise
Inc. game controllers by Richard Walmsley <richwalm@gmail.com>
[ 21.072324] lp0: using parport0 (interrupt-driven).
[ 21.085100] input: DragonRise Inc. Generic USB Joystick as
/devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/input/input6
[ 21.085418] dragonrise 0003:0079:0006.0002: input,hidraw2: USB HID v1.10
Joystick [DragonRise Inc. Generic USB Joystick ] on
usb-0000:00:1d.2-2/input0
[ 21.085430] dragonrise 0003:0079:0006.0002: Force Feedback for DragonRise
Inc. game controllers by Richard Walmsley <richwalm@gmail.com>
[ 21.192614] Bluetooth: RFCOMM TTY layer initialized
[ 21.192619] Bluetooth: RFCOMM socket layer initialized
[ 21.192620] Bluetooth: RFCOMM ver 1.11
[ 21.249072] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 21.249075] Bluetooth: BNEP filters: protocol multicast
[ 21.277120] init: failsafe main process (1515) killed by TERM signal
[ 21.904499] usbcore: registered new interface driver usbserial
[ 21.905128] USB Serial support registered for generic
[ 21.905173] usbcore: registered new interface driver usbserial_generic
[ 21.905175] usbserial: USB Serial Driver core
[ 21.949876] USB Serial support registered for GSM modem (1-port)
[ 21.949929] option 1-7:1.0: GSM modem (1-port) converter detected
[ 21.950156] usb 1-7: GSM modem (1-port) converter now attached to ttyUSB0
[ 21.950168] option 1-7:1.1: GSM modem (1-port) converter detected
[ 21.950266] usb 1-7: GSM modem (1-port) converter now attached to ttyUSB1
[ 21.950340] usbcore: registered new interface driver option
[ 21.950342] option: v0.7.2:USB Driver for GSM modems
[ 22.153951] intel_rng: Firmware space is locked read-only. If you can't or
[ 22.153953] intel_rng: don't want to disable this in firmware setup, and if
[ 22.153954] intel_rng: you are certain that your system has a functional
[ 22.153955] intel_rng: RNG, try using the 'no_fwh_detect' option.
[ 22.306520] leds_ss4200: no LED devices found
[ 23.256703] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
[ 23.256760] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
[ 23.256787] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 23.485820] hda_codec: ALC888: BIOS auto-probing.
[ 23.492258] input: HDA Intel Line as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 23.492361] input: HDA Intel Rear Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 23.492426] input: HDA Intel Line-Out as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 23.492669] snd_hda_intel 0000:01:00.1: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
[ 23.492673] hda_intel: Disabling MSI
[ 23.492701] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[ 24.788065] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 24.812036] HDMI status: Codec=1 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 24.836022] HDMI status: Codec=2 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 24.860032] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 24.860363] input: HDA NVidia HDMI/DP,pcm=9 as
/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
[ 24.860509] input: HDA NVidia HDMI/DP,pcm=8 as
/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
[ 24.861339] input: HDA NVidia HDMI/DP,pcm=7 as
/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
[ 24.862677] input: HDA NVidia HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[ 28.568198] option: option_instat_callback: error -108
[ 28.568317] option1 ttyUSB0: GSM modem (1-port) converter now disconnected
from ttyUSB0
[ 28.568336] option 1-7:1.0: device disconnected
[ 35.272311] option1 ttyUSB1: GSM modem (1-port) converter now disconnected
from ttyUSB1
[ 35.272322] option 1-7:1.1: device disconnected
[ 35.384068] usb 1-7: reset high-speed USB device number 5 using ehci_hcd
[ 35.528532] option 1-7:1.1: GSM modem (1-port) converter detected
[ 35.529755] usb 1-7: GSM modem (1-port) converter now attached to ttyUSB0
[ 35.548086] option 1-7:1.0: GSM modem (1-port) converter detected
[ 35.548360] usb 1-7: GSM modem (1-port) converter now attached to ttyUSB1
[ 42.904182] option: option_instat_callback: error -108
[ 42.904296] option1 ttyUSB1: GSM modem (1-port) converter now disconnected
from ttyUSB1
[ 42.904331] option 1-7:1.0: device disconnected
[ 48.576274] option1 ttyUSB0: GSM modem (1-port) converter now disconnected
from ttyUSB0
[ 48.576286] option 1-7:1.1: device disconnected
[ 48.688039] usb 1-7: reset high-speed USB device number 5 using ehci_hcd
[ 48.825395] option 1-7:1.1: GSM modem (1-port) converter detected
[ 48.825506] usb 1-7: GSM modem (1-port) converter now attached to ttyUSB0
[ 48.825884] option 1-7:1.0: GSM modem (1-port) converter detected
[ 48.825969] usb 1-7: GSM modem (1-port) converter now attached to ttyUSB1
[ 56.216209] option: option_instat_callback: error -108
[ 56.216308] option1 ttyUSB1: GSM modem (1-port) converter now disconnected
from ttyUSB1
[ 56.216327] option 1-7:1.0: device disconnected
[ 61.840275] option1 ttyUSB0: GSM modem (1-port) converter now disconnected
from ttyUSB0
[ 61.840286] option 1-7:1.1: device disconnected
[ 61.952035] usb 1-7: reset high-speed USB device number 5 using ehci_hcd
[ 62.089416] option 1-7:1.1: GSM modem (1-port) converter detected
[ 62.089518] usb 1-7: GSM modem (1-port) converter now attached to ttyUSB0
[ 62.089572] option 1-7:1.0: GSM modem (1-port) converter detected
[ 62.089652] usb 1-7: GSM modem (1-port) converter now attached to ttyUSB1
[ 69.528216] option: option_instat_callback: error -108
[ 69.528316] option1 ttyUSB1: GSM modem (1-port) converter now disconnected
from ttyUSB1
[ 69.528334] option 1-7:1.0: device disconnected
[ 78.132018] tty_ldisc_hangup: waiting (usb-storage) for ttyUSB0 took too
long, but we keep waiting...
[ 80.104357] option1 ttyUSB0: GSM modem (1-port) converter now disconnected
from ttyUSB0
[ 80.104368] option 1-7:1.1: device disconnected
[ 80.216044] usb 1-7: reset high-speed USB device number 5 using ehci_hcd
[ 80.353544] option 1-7:1.1: GSM modem (1-port) converter detected
[ 80.353648] usb 1-7: GSM modem (1-port) converter now attached to ttyUSB0
[ 80.353698] option 1-7:1.0: GSM modem (1-port) converter detected
[ 80.353780] usb 1-7: GSM modem (1-port) converter now attached to ttyUSB1
[ 110.488246] option: option_instat_callback: error -108
[ 111.172829] option1 ttyUSB1: GSM modem (1-port) converter now disconnected
from ttyUSB1
[ 111.172849] option 1-7:1.0: device disconnected
[ 111.174060] option1 ttyUSB0: GSM modem (1-port) converter now disconnected
from ttyUSB0
[ 111.174079] option 1-7:1.1: device disconnected
[ 111.284049] usb 1-7: reset high-speed USB device number 5 using ehci_hcd
[ 111.421644] option 1-7:1.1: GSM modem (1-port) converter detected
[ 111.421745] usb 1-7: GSM modem (1-port) converter now attached to ttyUSB0
[ 111.421805] option 1-7:1.0: GSM modem (1-port) converter detected
[ 111.421886] usb 1-7: GSM modem (1-port) converter now attached to ttyUSB1
ubuntu@ubuntu:~$

zekkerj · 27 de Outubro de 2012, 22:03

Engraçado, esse modem parece estar pronto pra operar. Vc não consegue visualizá-lo no gerenciador de redes, não?

nuno_nunes · 28 de Outubro de 2012, 10:58

Citação de: zekkerj online 27 de Outubro de 2012, 22:03
Engraçado, esse modem parece estar pronto pra operar. Vc não consegue visualizá-lo no gerenciador de redes, não?

Pois eu acho isso muito estranho, eu no meu eu utilizo o gestor de ligações e nunca deu problema

Butuntu · 28 de Outubro de 2012, 11:30

Citação de: zekkerj online 27 de Outubro de 2012, 22:03
Engraçado, esse modem parece estar pronto pra operar. Vc não consegue visualizá-lo no gerenciador de redes, não?

Não consigo. Só consigo se eu usar o firmware ruim, que é o mais novo, o do site da Huawei.

Butuntu · 28 de Outubro de 2012, 11:31

Citação de: nuno_nunes online 28 de Outubro de 2012, 10:58
Citação de: zekkerj online 27 de Outubro de 2012, 22:03
Engraçado, esse modem parece estar pronto pra operar. Vc não consegue visualizá-lo no gerenciador de redes, não?

Pois eu acho isso muito estranho, eu no meu eu utilizo o gestor de ligações e nunca deu problema

Nuno, a sua operadora é a CTBC? Pois o firmware é diferente conforme a operadora.

Butuntu · 28 de Outubro de 2012, 11:35

Eu tenho o firmware salvo, mas o site da Huawei nem fornece mais ele. Acho que eles viram que esse firmware está com defeito. Mas já tem um bom tempo que eles tiraram do site, e eu ouvi dizer que eles não dão mais suporte de atualizações para esse modem.