Wifi desligar e desliar por uso de comando no terminal

[Droy_d]

javascript:void(0);Como podem ver ja tentei algumas coisas e nada de resultado positivo, me quebrou a chave que liga e desliga a wifi, mas ela esta la so esperando para ser usada..qual o comando valido para ela voltar a ser minha amiga???voce sabe???
Acer 3680 Zr1 este o notboock em uso !!!
~# ifconfig wlan0 up
SIOCSIFFLAGS: Operation not possible due to RF-kill

~# ifconfig
eth0      Link encap:Ethernet  HWaddr 00:16:36:c8:71:47 
          inet addr:192.168.1.14  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::216:36ff:fec8:7147/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:10505 errors:0 dropped:0 overruns:0 frame:0
          TX packets:10257 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:9013202 (9.0 MB)  TX bytes:2145717 (2.1 MB)
          Interrupt:16

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:4 errors:0 dropped:0 overruns:0 frame:0
          TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:240 (240.0 B)  TX bytes:240 (240.0 B)

~# dhclient wlan0
There is already a pid file /var/run/dhclient.pid with pid 2656
killed old client process, removed PID file
Internet Systems Consortium DHCP Client V3.1.3
Copyright 2004-2009 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/

SIOCSIFFLAGS: Operation not possible due to RF-kill
SIOCSIFFLAGS: Operation not possible due to RF-kill
Listening on LPF/wlan0/00:19:7d:38:cf:b8
Sending on   LPF/wlan0/00:19:7d:38:cf:b8
Sending on   Socket/fallback
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 3
send_packet: Network is down
receive_packet failed on wlan0: Network is down
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 7
send_packet: Network is down
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 11
send_packet: Network is down
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 15
send_packet: Network is down
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 18
send_packet: Network is down
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 7
send_packet: Network is down
No DHCPOFFERS received.
No working leases in persistent database - sleeping.
resolvconf: Error: /etc/resolv.conf must be a symlink

[Tota]

Ola

Voce cita que sua chave para acionar/desabilitar a placa de rede sem fios quebrou.

Então o que me parece aqui, pelo pouco que postou (faltou lsusb, lspci e dmesg), é que ela quebrou em "desligado"

Neste caso, nada resta a fazer via software, pois a chave desliga a energia da placa, e assim sem energia, para o sistema ela não existe.

A solução é abrir o note e trocar a chave ou como alternativa, soldar os dois fios da chave inutilizando a mesma para deixar a placa sempre energizada (ligada)

[]'s e boa sorte

[Droy_d]

Oi Tota....
Obrigado por responder.

Isso mesmo..mas ela  se mostra na placa mae, entao teremos (eu) uma chanche de deixar ela sempre ativa na placa mae(ligada, on)...ok, lindo!vc tem como se nao for te pedir muito me passar um link pra comecar a minha procura...

Notbook Acer Aspire 3680 Zr1

Sem mais e muito obrigado,
Droy_d!

[Droy_d]

~# lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 3 (rev 02)
00:1d.0 USB Controller: Intel Corporation N10/ICH7 Family USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 02)
02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8038 PCI-E Fast Ethernet Controller (rev 14)
0a:03.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
0a:09.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
0a:09.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)

~# lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0402:5602 ALi Corp. Video Camera Controller
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

[Droy_d]

Nao cabe tudo de uma vez Tota...
t pref]
[    0.902304] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
[    0.902311] pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
[    0.902323] pci 0000:00:1c.2:   bridge window [mem 0x84800000-0x849fffff]
[    0.902333] pci 0000:00:1c.2:   bridge window [mem 0x84a00000-0x84bfffff 64bit pref]
[    0.902349] pci 0000:0a:09.0: BAR 15: assigned [mem 0x80000000-0x83ffffff pref]
[    0.902361] pci 0000:0a:09.0: BAR 16: assigned [mem 0x88000000-0x8bffffff]
[    0.902369] pci 0000:0a:09.0: BAR 13: assigned [io  0x5000-0x50ff]
[    0.902376] pci 0000:0a:09.0: BAR 14: assigned [io  0x5400-0x54ff]
[    0.902383] pci 0000:0a:09.0: CardBus bridge to [bus 0b-0e]
[    0.902390] pci 0000:0a:09.0:   bridge window [io  0x5000-0x50ff]
[    0.902400] pci 0000:0a:09.0:   bridge window [io  0x5400-0x54ff]
[    0.902410] pci 0000:0a:09.0:   bridge window [mem 0x80000000-0x83ffffff pref]
[    0.902423] pci 0000:0a:09.0:   bridge window [mem 0x88000000-0x8bffffff]
[    0.902434] pci 0000:00:1e.0: PCI bridge to [bus 0a-0b]
[    0.902441] pci 0000:00:1e.0:   bridge window [io  0x5000-0x5fff]
[    0.902453] pci 0000:00:1e.0:   bridge window [mem 0xd0100000-0xd01fffff]
[    0.902463] pci 0000:00:1e.0:   bridge window [mem 0x80000000-0x83ffffff pref]
[    0.902484] pci 0000:00:1c.0: enabling device (0000 -> 0003)
[    0.902506] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.902519] pci 0000:00:1c.0: setting latency timer to 64
[    0.902527] pci 0000:00:1c.1: enabling device (0000 -> 0003)
[    0.902540] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.902552] pci 0000:00:1c.1: setting latency timer to 64
[    0.902560] pci 0000:00:1c.2: enabling device (0000 -> 0003)
[    0.902573] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.902584] pci 0000:00:1c.2: setting latency timer to 64
[    0.902591] pci 0000:00:1e.0: enabling device (0004 -> 0007)
[    0.902602] pci 0000:00:1e.0: setting latency timer to 64
[    0.902611] pci 0000:0a:09.0: enabling device (0000 -> 0003)
[    0.902624] pci 0000:0a:09.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.902637] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
[    0.902641] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[    0.902644] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.902648] pci_bus 0000:02: resource 1 [mem 0x84000000-0x841fffff]
[    0.902651] pci_bus 0000:02: resource 2 [mem 0x84200000-0x843fffff 64bit pref]
[    0.902655] pci_bus 0000:03: resource 0 [io  0x3000-0x3fff]
[    0.902658] pci_bus 0000:03: resource 1 [mem 0x84400000-0x845fffff]
[    0.902662] pci_bus 0000:03: resource 2 [mem 0x84600000-0x847fffff 64bit pref]
[    0.902665] pci_bus 0000:04: resource 0 [io  0x4000-0x4fff]
[    0.902669] pci_bus 0000:04: resource 1 [mem 0x84800000-0x849fffff]
[    0.902672] pci_bus 0000:04: resource 2 [mem 0x84a00000-0x84bfffff 64bit pref]
[    0.902676] pci_bus 0000:0a: resource 0 [io  0x5000-0x5fff]
[    0.902679] pci_bus 0000:0a: resource 1 [mem 0xd0100000-0xd01fffff]
[    0.902683] pci_bus 0000:0a: resource 2 [mem 0x80000000-0x83ffffff pref]
[    0.902686] pci_bus 0000:0a: resource 4 [io  0x0000-0xffff]
[    0.902689] pci_bus 0000:0a: resource 5 [mem 0x00000000-0xffffffff]
[    0.902693] pci_bus 0000:0b: resource 0 [io  0x5000-0x50ff]
[    0.902696] pci_bus 0000:0b: resource 1 [io  0x5400-0x54ff]
[    0.902699] pci_bus 0000:0b: resource 2 [mem 0x80000000-0x83ffffff pref]
[    0.902703] pci_bus 0000:0b: resource 3 [mem 0x88000000-0x8bffffff]
[    0.902754] NET: Registered protocol family 2
[    0.902843] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.903145] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.903998] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.904510] TCP: Hash tables configured (established 131072 bind 65536)
[    0.904522] TCP reno registered
[    0.904533] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.904556] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.904725] NET: Registered protocol family 1
[    0.904759] pci 0000:00:02.0: Boot video device
[    0.904912] PCI: CLS 64 bytes, default 64
[    0.904987] Trying to unpack rootfs image as initramfs...
[    1.408851] Freeing initrd memory: 15012k freed
[    1.419120] Simple Boot Flag at 0x36 set to 0x1
[    1.419388] cpufreq-nforce2: No nForce2 chipset.
[    1.419590] audit: initializing netlink socket (disabled)
[    1.419612] type=2000 audit(1311853140.412:1): initialized
[    1.430626] highmem bounce pool size: 64 pages
[    1.430639] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    1.432973] VFS: Disk quotas dquot_6.5.2
[    1.433064] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.434034] fuse init (API version 7.16)
[    1.434170] msgmni has been set to 1704
[    1.434450] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.434461] io scheduler noop registered
[    1.434466] io scheduler deadline registered (default)
[    1.434612] pcieport 0000:00:1c.0: setting latency timer to 64
[    1.434680] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    1.434779] pcieport 0000:00:1c.1: setting latency timer to 64
[    1.434837] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[    1.434926] pcieport 0000:00:1c.2: setting latency timer to 64
[    1.434985] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[    1.435103] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.435140] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.435347] vesafb: framebuffer at 0xc0000000, mapped to 0xf8080000, using 1536k, total 1536k
[    1.435358] vesafb: mode is 1024x768x16, linelength=2048, pages=0
[    1.435364] vesafb: scrolling: redraw
[    1.435371] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[    1.453555] Console: switching to colour frame buffer device 128x48
[    1.471795] fb0: VESA VGA frame buffer device
[    1.471982] intel_idle: MWAIT substates: 0x1110
[    1.471985] intel_idle: does not run on family 6 model 14
[    1.488058] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    1.504063] ACPI: AC Adapter [ACAD] (on-line)
[    1.504346] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[    1.504665] ACPI: Lid Switch [LID]
[    1.504841] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    1.505126] ACPI: Power Button [PWRB]
[    1.505310] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[    1.505595] ACPI: Sleep Button [SLPB]
[    1.505782] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    1.506039] ACPI: Power Button [PWRF]
[    1.506339] ACPI: acpi_idle registered with cpuidle
[    1.506690] Marking TSC unstable due to TSC halts in idle
[    1.568049] thermal LNXTHERM:00: registered as thermal_zone0
[    1.568249] ACPI: Thermal Zone [THRM] (49 C)
[    1.568497] isapnp: Scanning for PnP cards...
[    1.574201] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    1.574561] ACPI: Battery Slot [BAT1] (battery absent)
[    1.879875] isapnp: No Plug & Play device found
[    1.880133] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.882587] brd: module loaded
[    1.883475] loop: module loaded
[    1.883683] i2c-core: driver [adp5520] using legacy suspend method
[    1.883898] i2c-core: driver [adp5520] using legacy resume method
[    1.892503] ata_piix 0000:00:1f.2: version 2.13
[    1.892539] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.901079] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[    2.064026] ata_piix 0000:00:1f.2: setting latency timer to 64
[    2.064455] scsi0 : ata_piix
[    2.072951] scsi1 : ata_piix
[    2.081404] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18b0 irq 14
[    2.089876] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18b8 irq 15
[    2.098841] Fixed MDIO Bus: probed
[    2.107349] PPP generic driver version 2.4.2
[    2.115680] tun: Universal TUN/TAP device driver, 1.6
[    2.123936] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    2.132333] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.140677] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    2.149111] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    2.149116] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    2.157459] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    2.165794] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[    2.174097] ehci_hcd 0000:00:1d.7: debug port 1
[    2.186222] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    2.186244] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0544000
[    2.208020] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    2.216342] hub 1-0:1.0: USB hub found
[    2.224378] hub 1-0:1.0: 8 ports detected
[    2.232380] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.240341] uhci_hcd: USB Universal Host Controller Interface driver
[    2.248337] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    2.256573] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    2.256578] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    2.265013] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    2.273013] ata1.00: ATA-7: Hitachi HTS541680J9SA00, SB2OC70P, max UDMA/100
[    2.280885] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.289131] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T10N, PP02, max UDMA/33
[    2.297027] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[    2.305002] hub 2-0:1.0: USB hub found
[    2.312733] ata2.00: configured for UDMA/33
[    2.320291] hub 2-0:1.0: 2 ports detected
[    2.327630] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    2.335169] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    2.335174] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    2.342333] ata1.00: configured for UDMA/100
[    2.349486] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54168 SB2O PQ: 0 ANSI: 5
[    2.356761] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    2.364254] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.371558] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    2.379001] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[    2.386338] sd 0:0:0:0: [sda] Write Protect is off
[    2.393446] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.393797] hub 3-0:1.0: USB hub found
[    2.400929] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.408382] hub 3-0:1.0: 2 ports detected
[    2.415653] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T10N  PP02 PQ: 0 ANSI: 5
[    2.423599] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    2.431334] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    2.431339] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    2.439077] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus numbe

[Droy_d]

Segunda parte Tota...

  [    2.439077] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    2.446718] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[    2.454674] hub 4-0:1.0: USB hub found
[    2.462161] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.469930] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.477641] hub 4-0:1.0: 2 ports detected
[    2.485429]  sda: sda1 sda2 < sda5 >
[    2.493450] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    2.501662] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.501850] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.509855] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.517682] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    2.517687] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    2.525607] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    2.533441] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[    2.541349] hub 5-0:1.0: USB hub found
[    2.549046] usb 1-7: new high speed USB device using ehci_hcd and address 2
[    2.556871] hub 5-0:1.0: 2 ports detected
[    2.564838] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    2.587161] i8042: Detected active multiplexing controller, rev 1.1
[    2.601039] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.609194] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    2.617428] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    2.625519] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    2.633774] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    2.641656] mousedev: PS/2 mouse device common for all mice
[    2.649684] rtc_cmos 00:06: RTC can wake from S4
[    2.657524] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    2.665317] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    2.673280] device-mapper: uevent: version 1.0.3
[    2.681115] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[    2.689079] device-mapper: multipath: version 1.2.0 loaded
[    2.696960] device-mapper: multipath round-robin: version 1.0.0 loaded
[    2.705006] EISA: Probing bus 0 at eisa.0
[    2.712967] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    2.721090] Cannot allocate resource for EISA slot 1
[    2.730246] Cannot allocate resource for EISA slot 2
[    2.738286] Cannot allocate resource for EISA slot 3
[    2.746118] Cannot allocate resource for EISA slot 4
[    2.754119] Cannot allocate resource for EISA slot 5
[    2.761554] EISA: Detected 0 cards.
[    2.769000] cpuidle: using governor ladder
[    2.777057] cpuidle: using governor menu
[    2.784478] TCP cubic registered
[    2.791703] NET: Registered protocol family 10
[    2.800027] NET: Registered protocol family 17
[    2.806769] Registering the dns_resolver key type
[    2.813459] Using IPI No-Shortcut mode
[    2.820116] PM: Hibernation image not present or could not be loaded.
[    2.820132] registered taskstats version 1
[    2.827011]   Magic number: 3:409:682
[    2.833558] rtc_cmos 00:06: setting system clock to 2011-07-28 11:39:02 UTC (1311853142)
[    2.840217] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    2.846882] EDD information not available.
[    2.854198] Freeing unused kernel memory: 680k freed
[    2.861146] Write protecting the kernel text: 5356k
[    2.867708] Write protecting the kernel read-only data: 1884k
[    2.910374] udev: starting version 151
[    2.931965] udevd (62): /proc/62/oom_adj is deprecated, please use /proc/62/oom_score_adj instead.
[    3.086749] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
[    3.140863] sky2: driver version 1.28
[    3.189674] Linux agpgart interface v0.103
[    3.198429] sky2 0000:02:00.0: enabling device (0000 -> 0003)
[    3.205266] sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    3.219523] b43-pci-bridge 0000:0a:03.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    3.231482] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    3.248905] sky2 0000:02:00.0: setting latency timer to 64
[    3.249042] sky2 0000:02:00.0: Yukon-2 FE chip revision 1
[    3.256116] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
[    3.262994] sky2 0000:02:00.0: irq 43 for MSI/MSI-X
[    3.263200] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[    3.270131] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x0D, vendor 0x4243)
[    3.270141] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x09, vendor 0x4243)
[    3.270150] ssb: Core 2 found: PCI (cc 0x804, rev 0x0C, vendor 0x4243)
[    3.270158] ssb: Core 3 found: PCMCIA (cc 0x80D, rev 0x07, vendor 0x4243)
[    3.270958] sky2 0000:02:00.0: eth0: addr 00:16:36:c8:71:47
[    3.278130] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[    3.286513] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[    3.316426] ssb: Sonics Silicon Backplane found on PCI device 0000:0a:03.0
[    3.380635] [drm] Initialized drm 1.1.0 20060810
[    3.433513] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    3.440969] pci 0000:00:02.0: setting latency timer to 64
[    3.444851] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    3.446081] [drm] No driver support for vblank timestamp query.
[    3.447450] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    4.624471] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    7.201074] Adding 3227644k swap on /dev/sda5.  Priority:-1 extents:1 across:3227644k
[    7.551258] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    7.587539] udev: starting version 151
[    9.083065] lp: driver loaded but no devices found
[    9.087282] intel_rng: FWH not detected
[    9.109139] wmi: Mapper loaded
[    9.246940] Linux video capture interface: v2.00
[    9.253561] yenta_cardbus 0000:0a:09.0: CardBus bridge found [1025:0110]
[    9.253588] yenta_cardbus 0000:0a:09.0: Using CSCINT to route CSC interrupts to PCI
[    9.253591] yenta_cardbus 0000:0a:09.0: Routing CardBus interrupts to PCI
[    9.253599] yenta_cardbus 0000:0a:09.0: TI: mfunc 0x01321b22, devctl 0x66
[    9.400550] leds_ss4200: no LED devices found
[    9.403746] gspca: v2.12.0 registered
[    9.493416] yenta_cardbus 0000:0a:09.0: ISA IRQ mask 0x0cf8, PCI irq 20
[    9.493422] yenta_cardbus 0000:0a:09.0: Socket status: 30000006
[    9.493428] pci_bus 0000:0a: Raising subordinate bus# of parent bus (#0a) from #0b to #0e
[    9.493442] yenta_cardbus 0000:0a:09.0: pcmcia: parent PCI bridge window: [io  0x5000-0x5fff]
[    9.493446] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x5000-0x5fff: excluding 0x5000-0x50ff 0x5400-0x54ff
[    9.503723] yenta_cardbus 0000:0a:09.0: pcmcia: parent PCI bridge window: [mem 0xd0100000-0xd01fffff]
[    9.503728] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd0100000-0xd01fffff: excluding 0xd0100000-0xd010ffff
[    9.503744] yenta_cardbus 0000:0a:09.0: pcmcia: parent PCI bridge window: [mem 0x80000000-0x83ffffff pref]
[    9.503748] pcmcia_socket pcmcia_socket0: cs: memory probe 0x80000000-0x83ffffff: excluding 0x80000000-0x83ffffff
[    9.544514] gspca: probing 0402:5602
[    9.544520] ALi m5602: Probing for a po1030 sensor
[    9.545290] tifm_7xx1 0000:0a:09.2: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    9.574754] ALi m5602: Probing for a mt9m111 sensor
[    9.598505] ALi m5602: Probing for a s5k4aa sensor
[    9.635254] ALi m5602: Probing for an ov9650 sensor
[    9.678756] ALi m5602: Sensor reported 0xffff
[    9.678762] ALi m5602: Probing for a s5k83a sensor
[    9.701003] ALi m5602: Detected a s5k83a sensor
[    9.796615] cfg80211: Calling CRDA to update world regulatory domain
[    9.804692] gspca: video0 created
[    9.804830] usbcore: registered new interface driver ALi m5602
[   10.282371] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x12a0b1, caps: 0xa04713/0x204000/0x0
[   10.341545] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6
[   11.026440] b43-phy0: Broadcom 4318 WLAN found (core revision 9)
[   11.092254] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   11.092260] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
[   11.092264] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   11.092268] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
[   11.092271] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   11.092275] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
[   11.092278] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   11.092282] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
[   11.092285] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   11.092289] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
[   11.092292] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   11.092324] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
[   11.092327] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   11.092331] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
[   11.092334] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   11.092338] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
[   11.092341] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   11.092345] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
[   11.092348] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   11.092352] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
[   11.092355] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   11.092359] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
[   11.092362] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   11.092366] cfg80211: 2457000 KHz - 2482000 KHz @  KHz), (600 mBi, 2000 mBm)
[   11.092370] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   11.092373] cfg80211: 2457000 KHz - 2482000 KHz @  KHz), (600 mBi, 2000 mBm)
[   11.092377] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[   11.092381] cfg80211: 2474000 KHz - 2494000 KHz @  KHz), (600 mBi, 2000 mBm)
[   11.103605] sky2 0000:02:00.0: eth0: enabling interface
[   11.103905] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   11.464235] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   11.464242] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   11.464246] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   11.464250] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   11.464253] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   11.464257] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   11.464260] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   11.464264] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   11.464268] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   11.464271] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   11.464275] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   11.464278] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   11.464282] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   11.464286] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   11.464289] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   11.464293] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   11.464296] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   11.464300] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   11.464303] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   11.464307] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   11.464310] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   11.464314] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   11.464317] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   11.464321] cfg80211: 2457000 KHz - 2482000 KHz @  KHz), (300 mBi, 2000 mBm)
[   11.464324] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   11.464328] cfg80211: 2457000 KHz - 2482000 KHz @  KHz), (300 mBi, 2000 mBm)
[   11.464332] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[   11.464336] cfg80211: 2474000 KHz - 2494000 KHz @  KHz), (300 mBi, 2000 mBm)
[   11.464340] cfg80211: World regulatory domain updated:
[   11.464343] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   11.464348] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   11.464353] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   11.464357] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   11.464362] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   11.464366] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   11.563139] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   11.563949] Registered led device: b43-phy0::tx
[   11.563977] Registered led device: b43-phy0::rx
[   11.564632] Registered led device: b43-phy0::radio
[   11.564657] Broadcom 43xx driver loaded [ Features: PNL, Firmware-ID: FW13 ]
[   11.751320] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   11.751413] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[   11.751450] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   11.917379] hda_codec: ALC883: SKU not ready 0x411111f0
[   11.917488] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[   12.005796] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   12.308402] b43-phy0: Loading firmware version 508.1084 (2009-01-14 01:32:01)
[   12.362602] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   12.388144] b43-phy0: Radio hardware status changed to DISABLED
[   14.236505] sky2 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control rx
[   14.236729] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   24.496122] eth0: no IPv6 routers present
[   43.264331] sky2 0000:02:00.0: eth0: Link is down
[  631.014802] sky2 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control rx
[  667.186343] Bluetooth: Core ver 2.15
[  667.186389] NET: Registered protocol family 31
[  667.186391] Bluetooth: HCI device and connection manager initialized
[  667.186395] Bluetooth: HCI socket layer initialized
[ 1593.665208] sky2 0000:02:00.0: eth0: Link is down
[ 1594.115784] sky2 0000:02:00.0: eth0: disabling interface
[ 1594.124389] sky2 0000:02:00.0: eth0: enabling interface
[ 1594.124695] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1594.247900] sky2 0000:02:00.0: eth0: disabling interface
[ 1594.256342] sky2 0000:02:00.0: eth0: enabling interface
[ 1594.256638] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1604.655495] sky2 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control rx
[ 1604.655720] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 1615.216087] eth0: no IPv6 routers present
[ 1642.601974] sky2 0000:02:00.0: eth0: disabling interface
[ 1642.610561] sky2 0000:02:00.0: eth0: enabling interface
[ 1642.610859] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1642.625037] sky2 0000:02:00.0: eth0: disabling interface
[ 1642.641866] sky2 0000:02:00.0: eth0: enabling interface
[ 1642.654937] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1644.306640] sky2 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control rx
[ 1644.306875] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 1655.216084] eth0: no IPv6 routers present
[ 1793.501560] sky2 0000:02:00.0: eth0: Link is down
[ 1795.200885] sky2 0000:02:00.0: eth0: disabling interface
[ 1795.209424] sky2 0000:02:00.0: eth0: enabling interface
[ 1795.209723] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1795.381423] sky2 0000:02:00.0: eth0: disabling interface
[ 1795.390137] sky2 0000:02:00.0: eth0: enabling interface
[ 1795.390435] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1826.414415] sky2 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control rx
[ 1826.414639] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 1836.760023] eth0: no IPv6 routers present
[ 1853.910548] sky2 0000:02:00.0: eth0: disabling interface
[ 1853.919313] sky2 0000:02:00.0: eth0: enabling interface
[ 1853.919610] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1853.940191] sky2 0000:02:00.0: eth0: disabling interface
[ 1854.062631] sky2 0000:02:00.0: eth0: enabling interface
[ 1854.062929] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1855.910932] sky2 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control rx
[ 1855.911162] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 1865.968031] eth0: no IPv6 routers present
root@bt:~#

[Droy_d]

O Tota, resolvido o problema...soldei os contatos e ja estamos na atividde...felicidades pra  voce tambem Tota...mas nao se esqueca se puder me mandar coisas para aumentar o conhecimento..sempre bem vido...
~# iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.

wlan0     IEEE 802.11bg  ESSID:"Aestbourne1" 
          Mode:Managed  Frequency:2.412 GHz  Access Point: 00:21:63:FF:52:xx
          Bit Rate=48 Mb/s   Tx-Power=20 dBm   
          Retry  long limit:7   RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:off
          Link Quality=54/70  Signal level=-56 dBm 
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:3  Invalid misc:43   Missed beacon:0


Enfm, todos contentes... 

[Tota]

Ola

Só para agregar

[   12.388144] b43-phy0: Radio hardware status changed to DISABLED

Disabled = chave desligada.

[]'s