Olá zekkerj, desculpa a demora pela resposta, mas é que infelizmente não tive tempo... as segue abaixo o que havis me pedido:
sudo lshw -C network
*-network DISABLED
description: Wireless interface
product: RT3090 Wireless 802.11n 1T/1R PCIe
vendor: RaLink
physical id: 0
bus info: pci@0000:02:00.0
logical name: wlan0
version: 00
width: 32 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=rt3090 latency=0 multicast=yes wireless=RT2860 Wireless
resources: irq:17 memory:fe500000-fe50ffff
*-network
description: Ethernet interface
product: JMC250 PCI Express Gigabit Ethernet Controller
vendor: JMicron Technology Corp.
physical id: 0.5
bus info: pci@0000:03:00.5
logical name: eth0
version: 03
serial: 80:ee:73:11:0e:1c
size: 100MB/s
capacity: 1GB/s
width: 32 bits
clock: 33MHz
capabilities: pm pciexpress msix msi bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=jme driverversion=1.0.5 duplex=full ip=192.168.0.110 latency=0 link=yes multicast=yes port=MII speed=100MB/s
resources: irq:28 memory:fe400000-fe403fff ioport:e100(size=128) ioport:e000(size=256
)lspci
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18)
00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06)
00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06)
00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 (rev 06)
00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6)
00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06)
00:1f.2 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA IDE Controller (rev 06)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06)
00:1f.5 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 2 port SATA IDE Controller (rev 06)
00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 06)
02:00.0 Network controller: RaLink RT3090 Wireless 802.11n 1T/1R PCIe
03:00.0 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 80)
03:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 80)
03:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 80)
03:00.5 Ethernet controller: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller (rev 03)
lsusb
Bus 002 Device 003: ID 1fea:0038
Bus 002 Device 002: ID 8087:0020
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
Bus 001 Device 002: ID 8087:0020
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
No momento estou respondendo pelo note via cabo... E está aparecendo a seguinte mensagem na rede sem fio "o dispositivo não está pronto".
Espero que possam me ajudar! Muito obrigado!