Cole aqui o retorno do comando lsusb e dmesg.
Gunfee desde ja agradeço a sua resposta, colo aqui a informação que pediste:
lsusb:
Bus 003 Device 002: ID 0ace:1211 ZyDAS 802.11b/g USB2 WiFi
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 002: ID 0d62:a100 Darfon Electronics Corp. Benq Mouse
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
dmesg:
[ 0.000000] Linux version 2.6.24-24-generic (buildd@rothera) (gcc version 4.2.4 (Ubuntu 4.2.4-1ubuntu4)) #1 SMP Wed Apr 15 15:54:25 UTC 2009 (Ubuntu 2.6.24-24.53-generic)
[ 22.339309] ACPI: Core revision 20070126
[ 22.339391] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 22.368505] CPU0: Intel(R) Celeron(R) CPU 2.40GHz stepping 01
[ 22.368549] Total of 1 processors activated (4814.93 BogoMIPS).
[ 22.368653] ENABLING IO-APIC IRQs
[ 22.368839] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 22.512686] Brought up 1 CPUs
[ 22.512718] CPU0 attaching sched-domain:
[ 22.512723] domain 0: span 01
[ 22.512725] groups: 01
[ 22.513042] net_namespace: 64 bytes
[ 22.513055] Booting paravirtualized kernel on bare hardware
[ 22.513932] Time: 12:30:12 Date: 06/08/09
[ 22.513983] NET: Registered protocol family 16
[ 22.514379] EISA bus registered
[ 22.514420] ACPI: bus type pci registered
[ 22.553892] PCI: PCI BIOS revision 2.10 entry at 0xfbbf0, last bus=1
[ 22.553896] PCI: Using configuration type 1
[ 22.553903] Setting up standard PCI resources
[ 22.556520] ACPI: EC: Look up EC in DSDT
[ 22.560939] ACPI: Interpreter enabled
[ 22.560947] ACPI: (supports S0 S1 S4 S5)
[ 22.560971] ACPI: Using IOAPIC for interrupt routing
[ 22.568180] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 22.569420] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 22.588199] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
[ 22.588337] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 22.588463] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 22.588626] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 22.588755] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
[ 22.588885] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 22.589015] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 22.589145] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 22.589426] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 22.589491] pnp: PnP ACPI init
[ 22.589510] ACPI: bus type pnp registered
[ 22.593789] pnp: PnP ACPI: found 12 devices
[ 22.593795] ACPI: ACPI bus type pnp unregistered
[ 22.593803] PnPBIOS: Disabled by ACPI PNP
[ 22.594271] PCI: Using ACPI for IRQ routing
[ 22.594284] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 22.616463] NET: Registered protocol family 8
[ 22.616468] NET: Registered protocol family 20
[ 22.616619] AppArmor: AppArmor Filesystem Enabled
[ 22.620444] Time: tsc clocksource has been installed.
[ 22.628539] system 00:00: iomem range 0xf0000-0xf3fff could not be reserved
[ 22.628543] system 00:00: iomem range 0xf4000-0xf7fff could not be reserved
[ 22.628547] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
[ 22.628550] system 00:00: iomem range 0xfc000-0xfffff could not be reserved
[ 22.628553] system 00:00: iomem range 0x17ff0000-0x17ffffff could not be reserved
[ 22.628558] system 00:00: iomem range 0xffff0000-0xffffffff could not be reserved
[ 22.628562] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 22.628565] system 00:00: iomem range 0x100000-0x17feffff could not be reserved
[ 22.628568] system 00:00: iomem range 0xffee0000-0xffefffff could not be reserved
[ 22.628571] system 00:00: iomem range 0xfffe0000-0xfffeffff could not be reserved
[ 22.628575] system 00:00: iomem range 0xfec00000-0xfecfffff could not be reserved
[ 22.628578] system 00:00: iomem range 0xfee00000-0xfeefffff could not be reserved
[ 22.628590] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 22.628593] system 00:02: ioport range 0x294-0x297 has been reserved
[ 22.659356] PCI: Bridge: 0000:00:01.0
[ 22.659363] IO window: d000-dfff
[ 22.659370] MEM window: ec000000-ec0fffff
[ 22.659375] PREFETCH window: e0000000-e7ffffff
[ 22.659410] NET: Registered protocol family 2
[ 22.696444] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 22.696794] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 22.696902] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 22.697015] TCP: Hash tables configured (established 16384 bind 16384)
[ 22.697019] TCP reno registered
[ 22.708568] checking if image is initramfs... it is
[ 23.159620] Switched to high resolution mode on CPU 0
[ 23.439177] Freeing initrd memory: 7319k freed
[ 23.440387] audit: initializing netlink socket (disabled)
[ 23.440408] audit(1244464212.452:1): initialized
[ 23.443791] VFS: Disk quotas dquot_6.5.1
[ 23.443939] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 23.444204] io scheduler noop registered
[ 23.444208] io scheduler anticipatory registered
[ 23.444210] io scheduler deadline registered
[ 23.444238] io scheduler cfq registered (default)
[ 23.444292] Boot video device is 0000:01:00.0
[ 23.444824] isapnp: Scanning for PnP cards...
[ 23.796273] isapnp: No Plug & Play device found
[ 23.906147] Real Time Clock Driver v1.12ac
[ 23.906315] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 23.906559] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 23.906929] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 23.908636] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 23.909543] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 23.911206] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 23.914919] cpuidle: using governor ladder
[ 23.914922] cpuidle: using governor menu
[ 23.915051] NET: Registered protocol family 1
[ 23.915100] Using IPI No-Shortcut mode
[ 23.915150] registered taskstats version 1
[ 23.915268] Magic number: 13:349:531
[ 23.915473] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 23.915476] EDD information not available.
[ 23.915963] Freeing unused kernel memory: 368k freed
[ 23.915998] Write protecting the kernel read-only data: 806k
[ 23.950315] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 25.282518] fuse init (API version 7.9)
[ 25.309649] ACPI: Fan [FAN] (on)
[ 25.319502] ACPI Exception (processor_core-0822): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 25.322028] ACPI: Thermal Zone [THRM] (53 C)
[ 26.083125] SCSI subsystem initialized
[ 26.162784] usbcore: registered new interface driver usbfs
[ 26.162824] usbcore: registered new interface driver hub
[ 26.186629] libata version 3.00 loaded.
[ 26.198669] usbcore: registered new device driver usb
[ 26.206625] sis900.c: v1.08.10 Apr. 2 2006
[ 26.206738] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 16
[ 26.207898] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
[ 26.219877] 0000:00:04.0: Using transceiver found at address 1 as default
[ 26.225119] eth0: SiS 900 PCI Fast Ethernet at 0xe200, IRQ 16, 00:11:09:89:ed:92
[ 26.233723] ACPI: PCI Interrupt 0000:00:02.5[A] -> GSI 16 (level, low) -> IRQ 17
[ 26.233800] ACPI: PCI interrupt for device 0000:00:02.5 disabled
[ 26.240735] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 26.240822] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 18
[ 26.240845] ohci_hcd 0000:00:03.0: OHCI Host Controller
[ 26.241314] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
[ 26.241350] ohci_hcd 0000:00:03.0: irq 18, io mem 0xec124000
[ 26.296639] usb usb1: configuration #1 chosen from 1 choice
[ 26.296679] hub 1-0:1.0: USB hub found
[ 26.296692] hub 1-0:1.0: 3 ports detected
[ 26.362197] FDC 0 is a post-1991 82077
[ 26.398450] ACPI: PCI Interrupt 0000:00:03.1
-> GSI 21 (level, low) -> IRQ 19
[ 26.398475] ohci_hcd 0000:00:03.1: OHCI Host Controller
[ 26.398541] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
[ 26.398566] ohci_hcd 0000:00:03.1: irq 19, io mem 0xec120000
[ 26.456391] usb usb2: configuration #1 chosen from 1 choice
[ 26.456433] hub 2-0:1.0: USB hub found
[ 26.456446] hub 2-0:1.0: 3 ports detected
[ 26.558188] ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 20
[ 26.558215] ohci_hcd 0000:00:03.2: OHCI Host Controller
[ 26.558266] ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3
[ 26.558289] ohci_hcd 0000:00:03.2: irq 20, io mem 0xec121000
[ 26.616089] usb usb3: configuration #1 chosen from 1 choice
[ 26.616132] hub 3-0:1.0: USB hub found
[ 26.616144] hub 3-0:1.0: 2 ports detected
[ 26.718115] pata_sis 0000:00:02.5: version 0.5.2
[ 26.718161] ACPI: PCI Interrupt 0000:00:02.5[A] -> GSI 16 (level, low) -> IRQ 17
[ 26.721180] scsi0 : pata_sis
[ 26.722823] scsi1 : pata_sis
[ 26.723731] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x4000 irq 14
[ 26.723736] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x4008 irq 15
[ 26.861566] usb 2-3: new low speed USB device using ohci_hcd and address 2
[ 26.893998] ata1.00: ATA-6: ST340810A, 3.39, max UDMA/100
[ 26.894006] ata1.00: 78165360 sectors, multi 16: LBA
[ 26.894131] ata1.01: ATA-7: SAMSUNG SP0612N, TT100-23, max UDMA/100
[ 26.894135] ata1.01: 117304992 sectors, multi 16: LBA48
[ 26.894154] ata1.00: limited to UDMA/33 due to 40-wire cable
[ 26.894157] ata1.01: limited to UDMA/33 due to 40-wire cable
[ 26.909967] ata1.00: configured for UDMA/33
[ 26.917876] ata1.01: configured for UDMA/33
[ 27.074290] usb 2-3: configuration #1 chosen from 1 choice
[ 27.384626] usb 3-2: new full speed USB device using ohci_hcd and address 2
[ 27.400849] ata2.00: ATAPI: HL-DT-ST RW/DVD GCC-4521B, 1.05, max UDMA/33
[ 27.400883] ata2.01: ATAPI: TSSTcorpCD/DVDW TS-H552U, US03, max UDMA/33
[ 27.572582] ata2.00: configured for UDMA/33
[ 27.597306] usb 3-2: configuration #1 chosen from 1 choice
[ 27.600488] usbcore: registered new interface driver hiddev
[ 27.606539] input: Darfon USB Optical Mous as /devices/pci0000:00/0000:00:03.1/usb2/2-3/2-3:1.0/input/input2
[ 27.616411] input,hidraw0: USB HID v1.10 Mouse [Darfon USB Optical Mous] on usb-0000:00:03.1-3
[ 27.616444] usbcore: registered new interface driver usbhid
[ 27.616450] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 27.744295] ata2.01: configured for UDMA/33
[ 27.744507] scsi 0:0:0:0: Direct-Access ATA ST340810A 3.39 PQ: 0 ANSI: 5
[ 27.745341] scsi 0:0:1:0: Direct-Access ATA SAMSUNG SP0612N TT10 PQ: 0 ANSI: 5
[ 27.746508] scsi 1:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-4521B 1.05 PQ: 0 ANSI: 5
[ 27.747672] scsi 1:0:1:0: CD-ROM TSSTcorp CD/DVDW TS-H552U US03 PQ: 0 ANSI: 5
[ 28.485951] sr1: scsi3-mmc drive: 1x/48x writer cd/rw xa/form2 cdda tray
[ 28.486055] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 28.995701] Attempting manual resume
[ 28.995709] swsusp: Resume From Partition 8:17
[ 28.995711] PM: Checking swsusp image.
[ 28.996052] PM: Resume from disk failed.
[ 29.020075] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 29.020085] EXT3-fs: write access will be enabled during recovery.
[ 29.184918] kjournald starting. Commit interval 5 seconds
[ 29.184951] EXT3-fs: sdb2: orphan cleanup on readonly fs
[ 29.184960] ext3_orphan_cleanup: deleting unreferenced inode 3399692
[ 29.184999] EXT3-fs: sdb2: 1 orphan inode deleted
[ 29.185001] EXT3-fs: recovery complete.
[ 29.206507] EXT3-fs: mounted filesystem with ordered data mode.
[ 42.220344] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 42.284357] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 42.330477] Linux agpgart interface v0.102
[ 42.535862] agpgart: Detected SiS chipset - id:1633
[ 42.541549] agpgart: AGP aperture is 64M @ 0xe8000000
[ 42.736326] gameport: EMU10K1 is pci0000:00:06.1/gameport0, io 0xea00, speed 1028kHz
[ 42.939276] input: Power Button (FF) as /devices/virtual/input/input3
[ 42.951062] ACPI: Power Button (FF) [PWRF]
[ 42.951208] input: Power Button (CM) as /devices/virtual/input/input4
[ 42.963419] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 42.967037] ACPI: Power Button (CM) [PWRB]
[ 43.598204] ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 17 (level, low) -> IRQ 21
[ 44.041421] ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 22
[ 44.364726] intel8x0_measure_ac97_clock: measured 54816 usecs
[ 44.364733] intel8x0: clocking to 48000
[ 45.301214] parport_pc 00:0a: reported by Plug and Play ACPI
[ 45.301331] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 45.463028] usb 3-2: reset full speed USB device using ohci_hcd and address 2
[ 45.676440] phy0: Selected rate control algorithm 'pid'
[ 45.783593] zd1211rw 3-2:1.0: phy0
[ 45.783626] usbcore: registered new interface driver zd1211rw
[ 47.910334] zd1211rw 3-2:1.0: firmware version 4605
[ 47.973722] zd1211rw 3-2:1.0: zd1211 chip 0ace:1211 v4330 full 00-c0-a8 RF2959_RF pa0 g7---
[ 48.147792] lp0: using parport0 (interrupt-driven).
[ 48.263029] Adding 586332k swap on /dev/sdb1. Priority:-1 extents:1 across:586332k
[ 48.688762] NET: Registered protocol family 10
[ 48.689215] lo: Disabled Privacy Extensions
[ 48.690486] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 49.193472] EXT3 FS on sdb2, internal journal
[ 50.484004] kjournald starting. Commit interval 5 seconds
[ 50.490992] EXT3 FS on sda1, internal journal
[ 50.491003] EXT3-fs: mounted filesystem with ordered data mode.
[ 50.994807] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 52.418281] NET: Registered protocol family 17
[ 52.956132] No dock devices found.
[ 54.347936] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 54.347946] apm: overridden by ACPI.
[ 54.580356] ppdev: user-space parallel port driver
[ 54.789274] audit(1244464244.869:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5034 profile="/usr/sbin/cupsd" namespace="default"
[ 56.099959] eth0: Media Link Off
[ 56.100301] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 56.279105] Bluetooth: Core ver 2.11
[ 56.280262] NET: Registered protocol family 31
[ 56.280270] Bluetooth: HCI device and connection manager initialized
[ 56.280276] Bluetooth: HCI socket layer initialized
[ 56.320716] Bluetooth: L2CAP ver 2.9
[ 56.320725] Bluetooth: L2CAP socket layer initialized
[ 56.429325] Bluetooth: RFCOMM socket layer initialized
[ 56.429713] Bluetooth: RFCOMM TTY layer initialized
[ 56.429722] Bluetooth: RFCOMM ver 1.8
[ 141.959160] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 146.600603] NETDEV WATCHDOG: eth0: transmit timed out
[ 146.600617] eth0: Transmit timeout, status 00000004 00000000
[ 146.949156] eth0: Media Link On 100mbps full-duplex
[ 159.822843] eth0: no IPv6 routers present
[ 265.856494] eth0: no IPv6 routers present
[ 271.525356] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 273.833120] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 275.645536] eth0: Media Link On 100mbps full-duplex
[ 289.729240] eth0: no IPv6 routers present
[ 296.610308] eth0: Media Link Off
[ 301.604619] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 306.337929] NETDEV WATCHDOG: eth0: transmit timed out
[ 306.337944] eth0: Transmit timeout, status 00000004 00000040
[ 306.594660] eth0: Media Link On 100mbps full-duplex
[ 318.323597] eth0: no IPv6 routers present
[ 958.008904] eth0: Media Link On 100mbps full-duplex
[ 960.103310] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 961.862585] eth0: Media Link On 100mbps full-duplex
[ 979.377288] eth0: no IPv6 routers present
Creio que foi isso que pediu, so uma informação, eu andei a ver foruns e repararei que pediram para instalar o driver 1211 ZyDAS porque era compatível, so que nao funciona na mesma.
Mais uma vez obrigado.
Atenciosamente,
Carlos Lima