Pessoal,
Comprei hoje (02/junho/2009) um MP4 Vicini 1 GB. Quando plugo ele no computador ele monta e abre a pasta com os arquivos e eu consigo visualizá-los.
O problema é que eu não consigo copiar arquivos para o MP4. Ele começa a copiar e para até aparecer o "erro de entrada/saída".
Saída do comando lsusb
Bus 001 Device 022: ID 10d6:1101 Actions Semiconductor Co., Ltd D-Wave 2GB MP4 Player
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Saída do comando dmesg
[18363.876053] usb 1-5: new high speed USB device using ehci_hcd and address 27
[18364.009745] usb 1-5: configuration #1 chosen from 1 choice
[18364.013427] scsi15 : SCSI emulation for USB Mass Storage devices
[18364.021298] usb-storage: device found at 27
[18364.021303] usb-storage: waiting for device to settle before scanning
[18369.020282] usb-storage: device scan complete
[18369.020859] scsi scan: INQUIRY result too short (5), using 36
[18369.020869] scsi 15:0:0:0: Direct-Access GENERIC USB DISK DEVICE 1.00 PQ: 0 ANSI: 0 CCS
[18369.022856] sd 15:0:0:0: [sdb] 1971121 512-byte hardware sectors: (1.00 GB/962 MiB)
[18369.023475] sd 15:0:0:0: [sdb] Write Protect is off
[18369.023481] sd 15:0:0:0: [sdb] Mode Sense: 00 c0 00 00
[18369.023485] sd 15:0:0:0: [sdb] Assuming drive cache: write through
[18369.038371] sd 15:0:0:0: [sdb] 1971121 512-byte hardware sectors: (1.00 GB/962 MiB)
[18369.038844] sd 15:0:0:0: [sdb] Write Protect is off
[18369.038849] sd 15:0:0:0: [sdb] Mode Sense: 00 c0 00 00
[18369.038854] sd 15:0:0:0: [sdb] Assuming drive cache: write through
[18369.038866] sdb:
[18369.093163] sd 15:0:0:0: [sdb] Attached SCSI removable disk
[18369.093284] sd 15:0:0:0: Attached scsi generic sg2 type 0
[18400.073700] Inbound IN=eth0 OUT= MAC=00:16:17:d1:d5:cb:00:30:b8:d0:d2:b0:08:00 SRC=166.82.156.155 DST=201.80.56.13 LEN=48 TOS=0x00 PREC=0x00 TTL=110 ID=20453 DF PROTO=TCP SPT=4568 DPT=445 WINDOW=65535 RES=0x00 SYN URGP=0
[18402.912350] Inbound IN=eth0 OUT= MAC=00:16:17:d1:d5:cb:00:30:b8:d0:d2:b0:08:00 SRC=166.82.156.155 DST=201.80.56.13 LEN=48 TOS=0x00 PREC=0x00 TTL=110 ID=20525 DF PROTO=TCP SPT=4568 DPT=445 WINDOW=65535 RES=0x00 SYN URGP=0
[18424.724857] Inbound IN=eth0 OUT= MAC=00:16:17:d1:d5:cb:00:30:b8:d0:d2:b0:08:00 SRC=221.209.110.103 DST=201.80.56.13 LEN=622 TOS=0x00 PREC=0x00 TTL=39 ID=0 DF PROTO=UDP SPT=44266 DPT=1027 LEN=602
[18436.645347] FAT: Filesystem panic (dev sdb)
[18436.645357] fat_free_clusters: deleting FAT entry beyond EOF
[18436.645364] File system has been set read-only
[18449.773706] Inbound IN=eth0 OUT= MAC=00:16:17:d1:d5:cb:00:30:b8:d0:d2:b0:08:00 SRC=200.193.143.66 DST=201.80.56.13 LEN=63 TOS=0x00 PREC=0x00 TTL=117 ID=23572 PROTO=UDP SPT=63253 DPT=46209 LEN=43
[18558.734036] usb 1-5: USB disconnect, address 27
[18558.771048] scsi 15:0:0:0: rejecting I/O to dead device
[18578.376039] usb 1-5: new high speed USB device using ehci_hcd and address 28
[18578.510261] usb 1-5: configuration #1 chosen from 1 choice
[18578.510907] scsi16 : SCSI emulation for USB Mass Storage devices
[18578.513656] usb-storage: device found at 28
[18578.513662] usb-storage: waiting for device to settle before scanning
[18583.512319] usb-storage: device scan complete
[18583.513034] scsi scan: INQUIRY result too short (5), using 36
[18583.513041] scsi 16:0:0:0: Direct-Access GENERIC USB DISK DEVICE 1.00 PQ: 0 ANSI: 0 CCS
[18583.515020] sd 16:0:0:0: [sdb] 1971121 512-byte hardware sectors: (1.00 GB/962 MiB)
[18583.515731] sd 16:0:0:0: [sdb] Write Protect is off
[18583.515738] sd 16:0:0:0: [sdb] Mode Sense: 00 c0 00 00
[18583.515744] sd 16:0:0:0: [sdb] Assuming drive cache: write through
[18583.523787] sd 16:0:0:0: [sdb] 1971121 512-byte hardware sectors: (1.00 GB/962 MiB)
[18583.524257] sd 16:0:0:0: [sdb] Write Protect is off
[18583.524264] sd 16:0:0:0: [sdb] Mode Sense: 00 c0 00 00
[18583.524268] sd 16:0:0:0: [sdb] Assuming drive cache: write through
[18583.524280] sdb:
[18583.579302] sd 16:0:0:0: [sdb] Attached SCSI removable disk
[18583.579420] sd 16:0:0:0: Attached scsi generic sg2 type 0
[18607.234123] FAT: Filesystem panic (dev sdb)
[18607.234132] fat_free_clusters: deleting FAT entry beyond EOF
[18607.234138] File system has been set read-only
[18621.316092] FAT: Filesystem panic (dev sdb)
[18621.316099] fat_get_cluster: invalid cluster chain (i_pos 7734)
[18621.316110] FAT: Filesystem panic (dev sdb)
[18621.316112] fat_get_cluster: invalid cluster chain (i_pos 7734)
[18621.316118] FAT: Filesystem panic (dev sdb)
[18621.316120] fat_get_cluster: invalid cluster chain (i_pos 7734)
... (a mensagem é muito longa)
[18621.427994] FAT: Filesystem panic (dev sdb)
[18621.427997] fat_get_cluster: invalid cluster chain (i_pos 7734)
[18621.428005] FAT: Filesystem panic (dev sdb)
[18621.428008] fat_get_cluster: invalid cluster chain (i_pos 7734)
[18675.642061] Inbound IN=eth0 OUT= MAC=00:16:17:d1:d5:cb:00:30:b8:d0:d2:b0:08:00 SRC=85.139.244.73 DST=201.80.56.13 LEN=145 TOS=0x00 PREC=0x00 TTL=103 ID=59265 PROTO=UDP SPT=13496 DPT=22814 LEN=125
[18677.656394] Inbound IN=eth0 OUT= MAC=00:16:17:d1:d5:cb:00:30:b8:d0:d2:b0:08:00 SRC=85.139.244.73 DST=201.80.56.13 LEN=145 TOS=0x00 PREC=0x00 TTL=103 ID=59267 PROTO=UDP SPT=13496 DPT=22814 LEN=125
[18681.686757] Inbound IN=eth0 OUT= MAC=00:16:17:d1:d5:cb:00:30:b8:d0:d2:b0:08:00 SRC=85.139.244.73 DST=201.80.56.13 LEN=145 TOS=0x00 PREC=0x00 TTL=103 ID=59283 PROTO=UDP SPT=13496 DPT=22814 LEN=125
[18741.763465] Inbound IN=eth0 OUT= MAC=00:16:17:d1:d5:cb:00:30:b8:d0:d2:b0:08:00 SRC=189.107.20.102 DST=201.80.56.13 LEN=146 TOS=0x00 PREC=0x00 TTL=117 ID=40525 PROTO=UDP SPT=52180 DPT=22814 LEN=126
[18743.770179] Inbound IN=eth0 OUT= MAC=00:16:17:d1:d5:cb:00:30:b8:d0:d2:b0:08:00 SRC=189.107.20.102 DST=201.80.56.13 LEN=146 TOS=0x00 PREC=0x00 TTL=117 ID=40528 PROTO=UDP SPT=52180 DPT=22814 LEN=126
[18747.772252] Inbound IN=eth0 OUT= MAC=00:16:17:d1:d5:cb:00:30:b8:d0:d2:b0:08:00 SRC=189.107.20.102 DST=201.80.56.13 LEN=146 TOS=0x00 PREC=0x00 TTL=117 ID=40533 PROTO=UDP SPT=52180 DPT=22814 LEN=126
Uso o Ubuntu 9.04 (32 bits - Kernel padrão), 1.2 GB de RAM, Pentium IV 3.06 GHz
Tópico: Ubuntu 9.04 não copia arquivos para o MP4 [Resolvido] (Lida 1244 vezes)