Autor Tópico: Placa de Captura de TV saa7130 sem audio (Resolvido)  (Lida 28740 vezes)

Offline Josue Carrecon

  • Usuário Ubuntu
  • *
  • Mensagens: 114
    • Ver perfil
Placa de Captura de TV saa7130 sem audio (Resolvido)
« Online: 12 de Maio de 2009, 11:55 »
Pessoal li um monte de ajuda, mas o danado do audio não funciona. Toh com a seguinte configuração:

dmesg | grep saa
[   11.595103] saa7130/34: v4l2 driver version 0.2.15 loaded
[   11.595441] saa7134 0000:03:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   11.595452] saa7130[0]: found at 0000:03:04.0, rev: 1, irq: 16, latency: 64, mmio: 0xfbfffc00
[   11.595461] saa7130[0]: subsystem: 1131:2004, board: Encore ENLTV-FM [card=107,insmod option]
[   11.595539] saa7130[0]: board init: gpio is 571ff
[   11.595764] input: saa7134 IR (Encore ENLTV-FM) as /devices/pci0000:00/0000:00:13.1/0000:03:04.0/input/input7
[   11.784109] saa7130[0]: i2c eeprom 00: 31 11 04 20 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[   11.784122] saa7130[0]: i2c eeprom 10: 00 df 86 0f ff 20 ff ff ff ff ff ff ff ff ff ff
[   11.784132] saa7130[0]: i2c eeprom 20: 01 40 01 02 02 ff 01 03 08 ff 00 8f ff ff ff ff
[   11.784142] saa7130[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   11.784151] saa7130[0]: i2c eeprom 40: ff 87 00 c2 96 10 03 32 15 08 ff ff ff ff ff ff
[   11.784161] saa7130[0]: i2c eeprom 50: ff ff ff ff ff ff ff 41 83 ff 31 30 4d 4f 4f 4e
[   11.784170] saa7130[0]: i2c eeprom 60: 53 50 44 41 31 30 30 ff 41 ff ff ff ff ff ff ff
[   11.784179] saa7130[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   11.784188] saa7130[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   11.784198] saa7130[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   11.784207] saa7130[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   11.784216] saa7130[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   11.784225] saa7130[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   11.784234] saa7130[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   11.784244] saa7130[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   11.784253] saa7130[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   12.036224] tuner 1-0060: chip found @ 0xc0 (saa7130[0])
[   12.088296] saa7130[0]: registered device video0 [v4l2]
[   12.088442] saa7130[0]: registered device vbi0
[   12.088587] saa7130[0]: registered device radio0
[   12.106042] saa7134 ALSA driver for DMA sound loaded
[   12.106048] saa7130[0]/alsa: Encore ENLTV-FM doesn't support digital audio

dmesg | grep tuner
[   12.036224] tuner 1-0060: chip found @ 0xc0 (saa7130[0])
[   12.064054] tuner-simple 1-0060: creating new instance
[   12.064060] tuner-simple 1-0060: type set to 39 (LG NTSC (newer TAPC series))
« Última modificação: 15 de Maio de 2009, 07:53 por Josue Carrecon »

Offline Tota

  • Usuário Ubuntu
  • *
  • Mensagens: 14.982
    • Ver perfil
Re: Placa de Captura de TV saa7130 sem audio
« Resposta #1 Online: 12 de Maio de 2009, 12:48 »
Olá ,

como estou no celular, não posso te dar o link mas procure aquí no forum meu tópico => pixelview playtv mobile, lá tem como fazer o som reproduzir, não é a soluçao mais elegante mas salva a patria.

[],s

Offline Josue Carrecon

  • Usuário Ubuntu
  • *
  • Mensagens: 114
    • Ver perfil
Re: Placa de Captura de TV saa7130 sem audio
« Resposta #2 Online: 12 de Maio de 2009, 16:10 »
Tota, infelizmente não consegui botar o audio pra funcionar, quando puder dar uma força agradeço!!!

Offline Tota

  • Usuário Ubuntu
  • *
  • Mensagens: 14.982
    • Ver perfil
Re: Placa de Captura de TV saa7130 sem audio
« Resposta #3 Online: 12 de Maio de 2009, 20:39 »
você leu o meu tópico?

Pixel View PlayTV mobile ( Como Instalar e configurar )

veja que lá tem tudo para configurar sua placa, quem me auxilio foram dentre outros pintinho e mstr que são feras, logo eu recomendo a leitura

Poste aquí o resultado do comando
Código: [Selecionar]
sudo dmesg |grep saa

e vamos ver


[],s

Offline Josue Carrecon

  • Usuário Ubuntu
  • *
  • Mensagens: 114
    • Ver perfil
Re: Placa de Captura de TV saa7130 sem audio
« Resposta #4 Online: 13 de Maio de 2009, 07:56 »
Tota la vai, ha toh usando o 9.04 64bits: lspci
03:04.0 Multimedia controller: Philips Semiconductors SAA7130 Video Broadcast Decoder (rev 01)

lspci - vnn
03:04.0 Multimedia controller [0480]: Philips Semiconductors SAA7130 Video Broadcast Decoder [1131:7130] (rev 01)
   Subsystem: Philips Semiconductors Device [1131:2004]
   Flags: bus master, medium devsel, latency 64, IRQ 16
   Memory at fbfffc00 (32-bit, non-prefetchable) [size=1K]
   Capabilities: [40] Power Management version 1
   Kernel driver in use: saa7134
   Kernel modules: saa7134



sudo dmesg |grep saa
[   13.401921] saa7130/34: v4l2 driver version 0.2.15 loaded
[   13.406033] saa7134 0000:03:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   13.406045] saa7130[0]: found at 0000:03:04.0, rev: 1, irq: 16, latency: 64, mmio: 0xfbfffc00
[   13.406054] saa7130[0]: subsystem: 1131:2004, board: Encore ENLTV-FM [card=107,insmod option]
[   13.406187] saa7130[0]: board init: gpio is 571ff
[   13.406471] input: saa7134 IR (Encore ENLTV-FM) as /devices/pci0000:00/0000:00:13.1/0000:03:04.0/input/input7
[   13.584047] saa7130[0]: i2c eeprom 00: 31 11 04 20 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[   13.584060] saa7130[0]: i2c eeprom 10: 00 df 86 0f ff 20 ff ff ff ff ff ff ff ff ff ff
[   13.584070] saa7130[0]: i2c eeprom 20: 01 40 01 02 02 ff 01 03 08 ff 00 8f ff ff ff ff
[   13.584080] saa7130[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   13.584089] saa7130[0]: i2c eeprom 40: ff 87 00 c2 96 10 03 32 15 08 ff ff ff ff ff ff
[   13.584098] saa7130[0]: i2c eeprom 50: ff ff ff ff ff ff ff 41 83 ff 31 30 4d 4f 4f 4e
[   13.584107] saa7130[0]: i2c eeprom 60: 53 50 44 41 31 30 30 ff 41 ff ff ff ff ff ff ff
[   13.584116] saa7130[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   13.584125] saa7130[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   13.584134] saa7130[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   13.584143] saa7130[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   13.584153] saa7130[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   13.584162] saa7130[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   13.584171] saa7130[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   13.584180] saa7130[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   13.584189] saa7130[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   13.644207] tuner 1-0060: chip found @ 0xc0 (saa7130[0])
[   13.688236] saa7130[0]: registered device video0 [v4l2]
[   13.688383] saa7130[0]: registered device vbi0
[   13.688529] saa7130[0]: registered device radio0
[   13.709652] saa7134_alsa: disagrees about version of symbol snd_ctl_add
[   13.709660] saa7134_alsa: Unknown symbol snd_ctl_add
[   13.709774] saa7134_alsa: disagrees about version of symbol snd_pcm_new
[   13.709777] saa7134_alsa: Unknown symbol snd_pcm_new
[   13.709981] saa7134_alsa: disagrees about version of symbol snd_card_register
[   13.709984] saa7134_alsa: Unknown symbol snd_card_register
[   13.710193] saa7134_alsa: disagrees about version of symbol snd_card_free
[   13.710196] saa7134_alsa: Unknown symbol snd_card_free
[   13.710404] saa7134_alsa: disagrees about version of symbol snd_pcm_stop
[   13.710408] saa7134_alsa: Unknown symbol snd_pcm_stop
[   13.710634] saa7134_alsa: disagrees about version of symbol snd_ctl_new1
[   13.710639] saa7134_alsa: Unknown symbol snd_ctl_new1
[   13.711244] saa7134_alsa: Unknown symbol snd_card_new
[   13.711348] saa7134_alsa: disagrees about version of symbol snd_pcm_lib_ioctl
[   13.711350] saa7134_alsa: Unknown symbol snd_pcm_lib_ioctl
[   13.711650] saa7134_alsa: disagrees about version of symbol snd_pcm_set_ops
[   13.711652] saa7134_alsa: Unknown symbol snd_pcm_set_ops
[   13.711957] saa7134_alsa: disagrees about version of symbol snd_pcm_hw_constraint_integer
[   13.711960] saa7134_alsa: Unknown symbol snd_pcm_hw_constraint_integer
[   13.712453] saa7134_alsa: disagrees about version of symbol snd_pcm_period_elapsed
[   13.712459] saa7134_alsa: Unknown symbol snd_pcm_period_elapsed
[   13.712553] saa7134_alsa: disagrees about version of symbol snd_pcm_hw_constraint_step
[   13.712555] saa7134_alsa: Unknown symbol snd_pcm_hw_constraint_step
[   19.429545] saa7130[0]/irq[10,4294897153]: r=0x20 s=0x00 PE
[   19.429552] saa7130[0]/irq: looping -- clearing PE (parity error!) enable bit

e o tuner

sudo dmesg |grep tuner
[   13.644207] tuner 1-0060: chip found @ 0xc0 (saa7130[0])
[   13.664022] tuner-simple 1-0060: creating new instance
[   13.664029] tuner-simple 1-0060: type set to 69 (Tena TNF 5335 and similar models)



Offline Tota

  • Usuário Ubuntu
  • *
  • Mensagens: 14.982
    • Ver perfil
Re: Placa de Captura de TV saa7130 sem audio
« Resposta #5 Online: 13 de Maio de 2009, 13:22 »
bem,

O alsa não reconhece sua placa pois assume que ela é digital e não analogica

Então veja: (retirado do meu topico )
Citar
tenho uma LTT-200 e costumo a instalar assim

crie o arquivo '/etc/modprobe.d/captura' chown root:root e chmod 644
Citar
# saa7134 modulos
# quando inicializar o modulo usa estas opções
#
options saa7134 card=78 tuner=54 oss=1

crie o arquivo '/etc/rc5.d/S90captura' chown root:root e chmod 755
Citar
#!/bin/sh
# inicializa os modulos da placa de captura no boot
#
modprobe saa7134 i2c-scan-1
modprobe saa7134-alsa
modprobe saa7134-dvb

troque o numero da card e tuner pelo da sua placa de captura
acho que deve ser card=79 e tuner =54
e reinicie

verifique em dmesg

Inicalmente iriamos trocar o alsa pelo oss na placa e de uma olhada por oss no seu synaptic para instalar o que falta dele, anote tudo que faz para reverter caso de algo errado.

se nada funcionar, o jeito é apelar para o pacote sox ( tem no synaptic )

também do meu topico

Citar
Utilizando o sox o delay de som melhorou muito.

Código:

sox -c 2 -s -w -r 32000 -t ossdsp /dev/dsp1 -t ossdsp -w -r 32000 /dev/dsp &

tvtime --mixer=/dev/mixer:pcm
wait tvtime
t=`pidof sox`;
kill $t;
amixer -c 0 sset PCM 80%,80% unmute



[],s

Offline mstr

  • Usuário Ubuntu
  • *
  • Mensagens: 379
    • Ver perfil
    • instalar qualquer placas de captura PCI
Re: Placa de Captura de TV saa7130 sem audio
« Resposta #6 Online: 14 de Maio de 2009, 00:06 »
Josue Carrecon,

não sei de onde voce tirou que essa placa é uma encore
Citar
spci - vnn
03:04.0 Multimedia controller [0480]: Philips Semiconductors SAA7130 Video Broadcast Decoder [1131:7130] (rev 01)
   Subsystem: Philips Semiconductors Device [1131:2004]

pelo subsystem dela, tenta a card 61 ou a 69

como disse o Tota
Citar
crie o arquivo '/etc/modprobe.d/captura' chown root:root e chmod 644
Citar
# saa7134 modulos
# quando inicializar o modulo usa estas opções
#
options saa7134 card=69 tuner=-1
e reinicia é melhor

se tiver duvida verifique em http://mstr.ueuo.com
 

« Última modificação: 14 de Maio de 2009, 00:15 por mstr »

Offline Josue Carrecon

  • Usuário Ubuntu
  • *
  • Mensagens: 114
    • Ver perfil
Re: Placa de Captura de TV saa7130 sem audio
« Resposta #7 Online: 14 de Maio de 2009, 08:59 »
Salve mstr,  soh consigo capturar video da TV (no caso cabo) com a seguinte configuração no arquivo da captura: options saa7134 card=107 tuner=69, testei todas opções que voce me passou e em todas "sem sinal", no TVtime tah com a seguinte configuração, norma de televisao: PL-M, Change defualt audio standard (PL-DK), tem alguma coisa a ver? Com relação a marca a logo que aparece colada na placa eh uma ENCORE, mas herere,.

Offline mstr

  • Usuário Ubuntu
  • *
  • Mensagens: 379
    • Ver perfil
    • instalar qualquer placas de captura PCI
Re: Placa de Captura de TV saa7130 sem audio
« Resposta #8 Online: 14 de Maio de 2009, 22:10 »
Josue Carrecon,

sabe as encore em kerneis abaixo 2.6.28 usavam card=3 tuner=39

se o kernel for = ou maior que 2.6.28 tenta card=148 tuner=69

e o subsystem deveria ser 1a7f:2008

é realmente o pciid é muito confuso incompleto e furado, por isso essa problemática para instalar as capturas

qual é sua distribuição, kernel e arquitetura (gnome,kde ou kde4)

tenta assistir tv com o mplayer
Citar
mplayer tv:// -tv driver=v4l2:input=0:normid=9:channel=4:chanlist=us-bcast:width=640:height=480:amode=1:device=/dev/video1:adevice=/dev/dsp1
channel é o canal
verifique se seu device é /dev/video1
« Última modificação: 14 de Maio de 2009, 22:36 por mstr »

Offline Josue Carrecon

  • Usuário Ubuntu
  • *
  • Mensagens: 114
    • Ver perfil
Re: Placa de Captura de TV saa7130 sem audio (Resolvido)
« Resposta #9 Online: 15 de Maio de 2009, 07:56 »
Mstr, Tota, brigadao mesmo, funcionou,  options saa7134 card=148 tuner=69, hah o kernel eh  2.26.28, audio legal.

Offline Lomeu

  • Usuário Ubuntu
  • *
  • Mensagens: 23
    • Ver perfil
Re: Placa de Captura de TV saa7130 sem audio (Resolvido)
« Resposta #10 Online: 15 de Maio de 2009, 08:25 »
Mstr, Tota, brigadao mesmo, funcionou,  options saa7134 card=148 tuner=69, hah o kernel eh  2.26.28, audio legal.

Bom dia Josue. Amigo, tenho também uma encore e estou tendo dificuldade em instalá-la. Não consigo visualizar os canais no tvtime. Sempre aparece tela azul e com o dizer "sem sinal" . Agora que seu problema foi resolvido, poderia me auxilair na instalação da minha? veja a leitura feita:
nilton@nilton-desktop:~$ dmesg | grep saa
[   10.493267] psmouse serio1: ID: 10 00 64<6>saa7130/34: v4l2 driver version 0.2.14 loaded
[   10.510839] saa7134 0000:01:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   10.510849] saa7130[0]: found at 0000:01:01.0, rev: 1, irq: 18, latency: 64, mmio: 0xfebffc00
[   10.510858] saa7130[0]: subsystem: 1a7f:2004, board: UNKNOWN/GENERIC [card=0,autodetected]
[   10.510921] saa7130[0]: board init: gpio is 571ff
[   10.664032] saa7130[0]: i2c eeprom 00: 7f 1a 04 20 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[   10.664048] saa7130[0]: i2c eeprom 10: 00 df 86 0f ff 20 ff ff ff ff ff ff ff ff ff ff
[   10.664062] saa7130[0]: i2c eeprom 20: 01 40 01 02 02 ff 01 03 08 ff 00 8f ff ff ff ff
[   10.664075] saa7130[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   10.664089] saa7130[0]: i2c eeprom 40: ff 87 00 c2 96 10 03 32 15 08 ff ff ff ff ff ff
[   10.664102] saa7130[0]: i2c eeprom 50: ff ff ff ff ff ff ff 41 84 ff 31 30 4d 4f 4f 4e
[   10.664115] saa7130[0]: i2c eeprom 60: 53 50 44 41 31 30 30 ff 41 ff ff ff ff ff ff ff
[   10.664129] saa7130[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   10.664142] saa7130[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   10.664155] saa7130[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   10.664169] saa7130[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   10.664182] saa7130[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   10.664195] saa7130[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   10.664208] saa7130[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   10.664222] saa7130[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   10.664235] saa7130[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   10.664358] saa7130[0]: registered device video0 [v4l2]
[   10.664402] saa7130[0]: registered device vbi0
[   10.697454] saa7134 ALSA driver for DMA sound loaded
[   10.697490] saa7130[0]/alsa: saa7130[0] at 0xfebffc00 irq 18 registered as card -2
nilton@nilton-desktop:~$
 Obrigado podendo ajudar ou não.

Offline Josue Carrecon

  • Usuário Ubuntu
  • *
  • Mensagens: 114
    • Ver perfil
Re: Placa de Captura de TV saa7130 sem audio (Resolvido)
« Resposta #11 Online: 15 de Maio de 2009, 11:49 »
Lomeu, feras no negocio são Tota e Mstr, mas vamos lah digite no terminal(como root) os seguintes comandos e poste os resultados ok:
  lspci
  lspci - vnn
  sudo dmesg |grep saa
  sudo dmesg |grep tuner

ok

Offline Tota

  • Usuário Ubuntu
  • *
  • Mensagens: 14.982
    • Ver perfil
Re: Placa de Captura de TV saa7130 sem audio (Resolvido)
« Resposta #12 Online: 15 de Maio de 2009, 14:59 »
Ola, Lomeu

Citar
[   10.510858] saa7130[0]: subsystem: 1a7f:2004, board: UNKNOWN/GENERIC [card=0,autodetected]

[   10.697490] saa7130[0]/alsa: saa7130[0] at 0xfebffc00 irq 18 registered as card -2

Seu caso é bem mais osso. Quando UNKNOWN/GENERIC card=0 significa que o GNU/Linux  soube reconhecer a placa mas não soube como acionar os drivers.

Agora voce pode pegar o seu subsystem: 1a7f:2004 e fazer uma longa pesquisa no google=> http://www.google.com.br/search?q=1a7f%3A2004%2Blinux&ie=utf-8&oe=utf-8&aq=t&rls=com.ubuntu:pt-BR:unofficial&client=firefox-a

Aqui no forum existem varios topicos da encore enltv-fm ( isto se ela for encore mesmo )

O mais próximo para o seu subsystem seria LifeView/Typhoon FlyVIDEO2000

Com os comandos =>lsusb para placas usb ou =>lspci para placas pci voce verá que sua placa tem um ID xxxx:xxxx com ele, voce tem que ir ao site do v4linux=> cardlist e tentar encontrar sua placa=> http://www.mjmwired.net/kernel/Documentation/video4linux/CARDLIST.saa7134

Do site do Mandriva => http://www.mandrivabrasil.org/site/forum/index.php?topic=7015.15

ele diz que sua placa aceitaria:
modprobe saa7134 card=3 tuner=39 alsa=1 radio=1

Dê uma checada nestes valores ou leia o topico lá no site do Mandriva.

[]'s boa pesquisa
« Última modificação: 15 de Maio de 2009, 15:46 por Tota »

Offline Lomeu

  • Usuário Ubuntu
  • *
  • Mensagens: 23
    • Ver perfil
Re: Placa de Captura de TV saa7130 sem audio (Resolvido)
« Resposta #13 Online: 15 de Maio de 2009, 15:24 »
Lomeu, feras no negocio são Tota e Mstr, mas vamos lah digite no terminal(como root) os seguintes comandos e poste os resultados ok:
  lspci
  lspci - vnn
Ola, Lomeu

Citar
[   10.510858] saa7130[0]: subsystem: 1a7f:2004, board: UNKNOWN/GENERIC [card=0,autodetected]

[   10.697490] saa7130[0]/alsa: saa7130[0] at 0xfebffc00 irq 18 registered as card -2

Seu caso é bem mais osso. Quando UNKNOWN/GENERIC card=0 significa que o GNU/Linux  soube reconhecer a placa mas não soube como acionar os drivers.

Agora voce pode pegar o sue.com.br/search?q=1a7f%3A2004%2Blinux&ie=utf-8&oe=utf-8&aq=t&rls=com.ubuntu:pt-BR:unofficial&client=firefox-a

Aqui no forum existem varios topicos da encore enltv-fm ( isto se ela for encore mesmo, pois parece que não )

O mais próximo para o seu subsystem seria LifeView/Typhoon FlyVIDEO2000

Com os comandos =>lsusb para placas usb ou =>lspci para placas pci voce verá que sua placa tem um ID xxxx:xxxx com ele, voce tem que ir ao site do v4linux=> cardlist e tentar encontrar sua placa=> http://www.mjmwired.net/kernel/Documentation/video4linux/CARDLIST.saa7134

Do site do Mandriva => http://www.mandrivabrasil.org/site/forum/index.php?topic=7015.15

ele diz que sua placa aceitaria:
modprobe saa7134 card=3 tuner=39 alsa=1 radio=1

Dê uma checada nestes valores ou leia o topico lá no site do Mandriva.

Obrigado Tota. Conforme eu disse ainda estou " engatinhando " no Linux. Vou seguir sua orientação e a de que mais puder me ajudar. Toda ajuda será bemvinda. Postarei resultado depois.
[]'s boa pesquisa

  sudo dmesg |grep saa
  sudo dmesg |grep tuner

ok

Valeu pela atenção Josué. Eis abaixo o resultado obtido ( esclareço que sou iniciante em linux e certamente seu conhecimento é maior que o meu ) :
nilton@nilton-desktop:~$ lspci
00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev 01)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
01:01.0 Multimedia controller: Philips Semiconductors SAA7130 Video Broadcast Decoder (rev 01)
01:02.0 Modem: Motorola SM56 Data Fax Modem (rev 04)
01:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
nilton@nilton-desktop:~$ lspci - vnn
Usage: lspci [<switches>]

Basic display modes:
-mm      Produce machine-readable output (single -m for an obsolete format)
-t      Show bus tree

Display options:
-v      Be verbose (-vv for very verbose)
-k      Show kernel drivers handling each device
-x      Show hex-dump of the standard part of the config space
-xxx      Show hex-dump of the whole config space (dangerous; root only)
-xxxx      Show hex-dump of the 4096-byte extended config space (root only)
-b      Bus-centric view (addresses and IRQ's as seen by the bus)
-D      Always show domain numbers

Resolving of device ID's to names:
-n      Show numeric ID's
-nn      Show both textual and numeric ID's (names & numbers)
-q      Query the PCI ID database for unknown ID's via DNS
-qq      As above, but re-query locally cached entries
-Q      Query the PCI ID database for all ID's via DNS

Selection of devices:
-s [[[[<domain>]:]<bus>]:][<slot>][.[<func>]]   Show only devices in selected slots
-d [<vendor>]:[<device>]         Show only devices with specified ID's

Other options:
-i <file>   Use specified ID database instead of /usr/share/misc/pci.ids.gz
-p <file>   Look up kernel modules in a given file instead of default modules.pcimap
-M      Enable `bus mapping' mode (dangerous; root only)

PCI access options:
-A <method>   Use the specified PCI access method (see `-A help' for a list)
-O <par>=<val>   Set PCI access parameter (see `-O help' for a list)
-G      Enable PCI access debugging
-H <mode>   Use direct hardware access (<mode> = 1 or 2)
-F <file>   Read PCI configuration dump from a given file
nilton@nilton-desktop:~$ sudo dmesg |grep saa
[sudo] password for nilton:
[   10.499306] saa7130/34: v4l2 driver version 0.2.14 loaded
[   10.499382] saa7134 0000:01:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   10.499392] saa7130[0]: found at 0000:01:01.0, rev: 1, irq: 18, latency: 64, mmio: 0xfebffc00
[   10.499402] saa7130[0]: subsystem: 1a7f:2004, board: Encore ENLTV-FM [card=107,insmod option]
[   10.499469] saa7130[0]: board init: gpio is 571ff
[   10.499595] input: saa7134 IR (Encore ENLTV-FM) as /devices/pci0000:00/0000:00:1e.0/0000:01:01.0/input/input7
[   10.656033] saa7130[0]: i2c eeprom 00: 7f 1a 04 20 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[   10.656049] saa7130[0]: i2c eeprom 10: 00 df 86 0f ff 20 ff ff ff ff ff ff ff ff ff ff
[   10.656063] saa7130[0]: i2c eeprom 20: 01 40 01 02 02 ff 01 03 08 ff 00 8f ff ff ff ff
[   10.656077] saa7130[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   10.656090] saa7130[0]: i2c eeprom 40: ff 87 00 c2 96 10 03 32 15 08 ff ff ff ff ff ff
[   10.656103] saa7130[0]: i2c eeprom 50: ff ff ff ff ff ff ff 41 84 ff 31 30 4d 4f 4f 4e
[   10.656117] saa7130[0]: i2c eeprom 60: 53 50 44 41 31 30 30 ff 41 ff ff ff ff ff ff ff
[   10.656130] saa7130[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   10.656143] saa7130[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   10.656156] saa7130[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   10.656169] saa7130[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   10.656183] saa7130[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   10.656196] saa7130[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   10.656209] saa7130[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   10.656222] saa7130[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   10.656236] saa7130[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   10.736130] tuner' 0-0060: chip found @ 0xc0 (saa7130[0])
[   10.744039] tuner' 0-0061: chip found @ 0xc2 (saa7130[0])
[   10.801517] saa7130[0]: registered device video0 [v4l2]
[   10.801587] saa7130[0]: registered device vbi0
[   10.801651] saa7130[0]: registered device radio0
[   10.818840] saa7134 ALSA driver for DMA sound loaded
[   10.818886] saa7130[0]/alsa: saa7130[0] at 0xfebffc00 irq 18 registered as card -2
nilton@nilton-desktop:~$ sudo dmesg |grep tuner
[   10.736130] tuner' 0-0060: chip found @ 0xc0 (saa7130[0])
[   10.744039] tuner' 0-0061: chip found @ 0xc2 (saa7130[0])
[   10.776036] tuner-simple 0-0060: creating new instance
[   10.776042] tuner-simple 0-0060: type set to 0 (Temic PAL (4002 FH5))
nilton@nilton-desktop:~$
 Obrigado mais uma vez.
Ola, Lomeu

Citar
[   10.510858] saa7130[0]: subsystem: 1a7f:2004, board: UNKNOWN/GENERIC [card=0,autodetected]

[   10.697490] saa7130[0]/alsa: saa7130[0] at 0xfebffc00 irq 18 registered as card -2

Seu caso é bem mais osso. Quando UNKNOWN/GENERIC card=0 significa que o GNU/Linux  soube reconhecer a placa mas não soube como acionar os drivers.

Agora voce pode pegar o ID dela ou seja  1a7f:2004 e fazer uma pequena maratona no google=> http://www.google.com.br/search?q=1a7f%3A2004%2Blinux&ie=utf-8&oe=utf-8&aq=t&rls=com.ubuntu:pt-BR:unofficial&client=firefox-a

Aqui no forum existem varios topicos da encore enltv-fm ( isto se ela for encore mesmo, pois parece que não )

O mais próximo para o seu subsystem seria LifeView/Typhoon FlyVIDEO2000

Com os comandos =>lsusb para placas usb ou =>lspci para placas pci voce verá que sua placa tem um ID xxxx:xxxx com ele, voce tem que ir ao site do v4linux=> cardlist e tentar encontrar sua placa=> http://www.mjmwired.net/kernel/Documentation/video4linux/CARDLIST.saa7134

Do site do Mandriva => http://www.mandrivabrasil.org/site/forum/index.php?topic=7015.15

ele diz que sua placa aceitaria:
modprobe saa7134 card=3 tuner=39 alsa=1 radio=1

Dê uma checada nestes valores ou leia o topico lá no site do Mandriva.

[]'s boa pesquisa


Offline mstr

  • Usuário Ubuntu
  • *
  • Mensagens: 379
    • Ver perfil
    • instalar qualquer placas de captura PCI
Re: Placa de Captura de TV saa7130 sem audio (Resolvido)
« Resposta #14 Online: 15 de Maio de 2009, 16:17 »
Lomeu,

tenta isso

Citar
crie o arquivo '/etc/modprobe.d/captura' chown root:root e chmod 644
Citar
# saa7134 modulos
# quando inicializar o modulo usa estas opções
#
options saa7134 card=3 tuner=-1


e reinicia