rede wife, placa mae Asus p5k3 deluxe. URGENTE!!!!!

[kuroobi]

Salveee amigos!
Alguem pode me ajudar a instalar uma rede wife?

Minha placa mae eh uma Asus p5k3 deluxe, nao sei o nome da placa de rede la, no manual ta escrito asus wifi-ap solo uhauhauh
nao manjo nada, pelo que li ate aqui, nada consegui.


como vi, rodei o comando sudo lspci

aqui esta a resposta, se alguem me ajudar agrade;co mto

cyberox@cyberox-desktop:~$ sudo lspci
[sudo] password for cyberox:
00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 02)
00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 02)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02)
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02)
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02)
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)
00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 4 port SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)
00:1f.5 IDE interface: Intel Corporation 82801I (ICH9 Family) 2 port SATA IDE Controller (rev 02)
01:00.0 VGA compatible controller: nVidia Corporation G94 [GeForce 9600 GT] (rev a1)
02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller (rev 12)
03:00.0 SATA controller: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 03)
03:00.1 IDE interface: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 03)
05:03.0 FireWire (IEEE 1394): Agere Systems FW323 (rev 70)
05:04.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet (rev 10)
cyberox@cyberox-desktop:~$


qual eh a minha placa?? como instalo por favor?
ainda nao manjo quase nada, ja li bastante to cansado, se alguem nao me ajudar nao vou conseguir, sozinho soh consegui ate aqui,.

vlwww

[kuroobi]

nao sei se ajuda, fui procurar no cd da placa, achei isso ( olha o caminho, tem drive wife, agora nao sei o qual instalo, nem como instalo, sera q to com a chave na mao, eh soh abrir a porta? alguem pode me ajudar pelo amor de Deus

[kuroobi]

no Redme.txt ta escrito isso

Release Date: 2006-01-24, ver 1.1

RTL8187 Linux driver version 1.1



--This driver supports RealTek RTL8187 Wireless LAN driver for Linux Debian3.1 kernel 2.6.13



//-----------------------------------------------------------------------------

// Files description.

//-----------------------------------------------------------------------------

1. Include ko files

module_DB31.tar.gz



2. Script to load/unload modules

./load

./unload



3. Supplicant source code:

./wpa_supplicant-0.3.8.tar.gz



4. Example of supplicant configuration file:

./wpa1.conf



//-----------------------------------------------------------------------------

// Insert modules.

//-----------------------------------------------------------------------------

1. Insert modules:



insmod ieee80211_crypt-rtl.ko

insmod ieee80211_crypt_wep-rtl.ko

insmod ieee80211_crypt_tkip-rtl.ko

insmod ieee80211_crypt_ccmp-rtl.ko

insmod ieee80211-rtl.ko

insmod r8187.ko





//-----------------------------------------------------------------------------

// Remove modules.

//-----------------------------------------------------------------------------

1. Remove related modules:

rmmod r8187.ko

rmmod ieee80211-rtl.ko

rmmod ieee80211_crypt_ccmp-rtl.ko

rmmod ieee80211_crypt_tkip-rtl.ko

rmmod ieee80211_crypt_wep-rtl.ko

rmmod ieee80211_crypt-rtl.ko







//-----------------------------------------------------------------------------

// Enable the device.

//-----------------------------------------------------------------------------

1. Make sure RTL8187 dongle is plugged.



2. Enalbe the device:

ifconfig wlan0 up







//-----------------------------------------------------------------------------

// Disable the device.

//-----------------------------------------------------------------------------

1. Disable the device:

ifconfig wlan0 down







//-----------------------------------------------------------------------------

// Join a BSS and set up IP address.

//-----------------------------------------------------------------------------

1. Scan BSS available:

iwlist wlan0 scan



2. Join a BSS:

iwconfig wlan0 essid SSID_TO_JOIN



3. Set up IP address of the device:

ifconfig wlan0 IP_ADDRESS







//-----------------------------------------------------------------------------

// WPA supplicant

//-----------------------------------------------------------------------------

1. Unpack source code of WPA supplicant:

tar -zxvf wpa_supplicant-0.3.8.tar.gz

cd wpa_supplicant-0.3.8



2. Create .config file:

cp defconfig .config



3. Edit .config file, uncomment the following line:

#CONFIG_DRIVER_IPW=y.



4. Build WPA supplicant:

make



5. Edit wpa_supplicant.conf to set up SSID and its passphrase.

For example, the following setting in "wpa1.conf" means SSID to join is "BufAG54_Ch6"

and its passphrase is "87654321".



network={

ssid="BufAG54_Ch6"

proto=WPA

key_mgmt=WPA-PSK

pairwise=CCMP TKIP

group=CCMP TKIP WEP104 WEP40

psk="87654321"

priority=2

}



6. Execute WPA supplicant (Assume 8187 and related modules had been loaded):

./wpa_supplicant -D ipw -c wpa1.conf -i wlan0 &
Editar/Apagar Mensagem Responder Com Citação Multi-Quote Nessa Mensagem Resposta Rápida a essa mensagem
kuroobi
Ver Perfil Público
Enviar mensagem privada para kuroobi
Procurar todas as respostas por kuroobi
Adicionar kuroobi em seus Contatos
  #4 (permalink) (permalink)   Adicionar na Reputação de kuroobi's   Denunciar Mensagem 
Antigo 22/01/2009, 01:38
Avatar de kuroobi    
kuroobi kuroobi está online agora [Criador deste tópico]
Usuário Registrado
kuroobi's Profile Fields
        
Data de Entrada: Jun 2008
Referências: (0)(0%+)
Mensagens: 346
kuroobi está em um caminho distinto
no Redme.txt ta escrito isso

Release Date: 2006-01-24, ver 1.1

RTL8187 Linux driver version 1.1



--This driver supports RealTek RTL8187 Wireless LAN driver for Linux Debian3.1 kernel 2.6.13



//-----------------------------------------------------------------------------

// Files description.

//-----------------------------------------------------------------------------

1. Include ko files

module_DB31.tar.gz



2. Script to load/unload modules

./load

./unload



3. Supplicant source code:

./wpa_supplicant-0.3.8.tar.gz



4. Example of supplicant configuration file:

./wpa1.conf



//-----------------------------------------------------------------------------

// Insert modules.

//-----------------------------------------------------------------------------

1. Insert modules:



insmod ieee80211_crypt-rtl.ko

insmod ieee80211_crypt_wep-rtl.ko

insmod ieee80211_crypt_tkip-rtl.ko

insmod ieee80211_crypt_ccmp-rtl.ko

insmod ieee80211-rtl.ko

insmod r8187.ko





//-----------------------------------------------------------------------------

// Remove modules.

//-----------------------------------------------------------------------------

1. Remove related modules:

rmmod r8187.ko

rmmod ieee80211-rtl.ko

rmmod ieee80211_crypt_ccmp-rtl.ko

rmmod ieee80211_crypt_tkip-rtl.ko

rmmod ieee80211_crypt_wep-rtl.ko

rmmod ieee80211_crypt-rtl.ko







//-----------------------------------------------------------------------------

// Enable the device.

//-----------------------------------------------------------------------------

1. Make sure RTL8187 dongle is plugged.



2. Enalbe the device:

ifconfig wlan0 up







//-----------------------------------------------------------------------------

// Disable the device.

//-----------------------------------------------------------------------------

1. Disable the device:

ifconfig wlan0 down







//-----------------------------------------------------------------------------

// Join a BSS and set up IP address.

//-----------------------------------------------------------------------------

1. Scan BSS available:

iwlist wlan0 scan



2. Join a BSS:

iwconfig wlan0 essid SSID_TO_JOIN



3. Set up IP address of the device:

ifconfig wlan0 IP_ADDRESS







//-----------------------------------------------------------------------------

// WPA supplicant

//-----------------------------------------------------------------------------

1. Unpack source code of WPA supplicant:

tar -zxvf wpa_supplicant-0.3.8.tar.gz

cd wpa_supplicant-0.3.8



2. Create .config file:

cp defconfig .config



3. Edit .config file, uncomment the following line:

#CONFIG_DRIVER_IPW=y.



4. Build WPA supplicant:

make



5. Edit wpa_supplicant.conf to set up SSID and its passphrase.

For example, the following setting in "wpa1.conf" means SSID to join is "BufAG54_Ch6"

and its passphrase is "87654321".



network={

ssid="BufAG54_Ch6"

proto=WPA

key_mgmt=WPA-PSK

pairwise=CCMP TKIP

group=CCMP TKIP WEP104 WEP40

psk="87654321"

priority=2

}



6. Execute WPA supplicant (Assume 8187 and related modules had been loaded):

./wpa_supplicant -D ipw -c wpa1.conf -i wlan0 &

[clcampos]

Tópico trancado.