o motivo mais comum é... o cabo desconectado. Mas você pode estar com algum problema no driver também.
Se vc der informações sobre sua máquina e sobre sua rede, fica mais fácil te ajudar.
Boa Tarde, É o seguinte: Pretendo fazer uma rede com ip fixo e compartilhar net e arquivos e impressoras. A minha net é via rádio, que chega através de uma placa pci ralink. Tenho um Switch dlink model: DES-1008D de 08 portas. minha palca mãe é uma asus m2n-mx se. com processador atlon x2 4200, 2gb de ram ddd2 667, hd 160 gb. Clico em Auto eth0 no icone de rede e aparece esta mensagem especificamente "rede com fio desconectado". já andei fazendo umas leituras no forum e não consegui solucionar o problema. Antes de mais nada deixo algumas informações da minha rede. Tomei a liberdade de postar alguns comandos que acho que seja útil para melhor análise. Sei que o tempo de vcs é bem pequeno, por isso deixo esses dados para facilitar nossa vida. espero não ter feito caca postando isto, mas a intenção é ajudar no tempo das respostas. Desde já agradeço.
ifconfigeth0 Link encap:Ethernet Endereço de HW 00:1d:60:6d:0b:48
endereço inet6: fe80::21d:60ff:fe6d:b48/64 Escopo:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Métrica:1
pacotes RX:140 erros:0 descartados:0 excesso:0 quadro:0
Pacotes TX:71 erros:0 descartados:0 excesso:0 portadora:0
colisões:0 txqueuelen:1000
RX bytes:13749 (13.7 KB) TX bytes:16083 (16.0 KB)
IRQ:43 Endereço de E/S:0xc000
lo Link encap:Loopback Local
inet end.: 127.0.0.1 Masc:255.0.0.0
endereço inet6: ::1/128 Escopo:Máquina
UP LOOPBACK RUNNING MTU:16436 Métrica:1
pacotes RX:156 erros:0 descartados:0 excesso:0 quadro:0
Pacotes TX:156 erros:0 descartados:0 excesso:0 portadora:0
colisões:0 txqueuelen:0
RX bytes:16400 (16.4 KB) TX bytes:16400 (16.4 KB)
ppp0 Link encap:Protocolo Ponto-a-Ponto
inet end.: 172.16.14.195 P-a-P:172.16.14.1 Masc:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1486 Métrica:1
pacotes RX:50140 erros:0 descartados:0 excesso:0 quadro:0
Pacotes TX:44644 erros:0 descartados:0 excesso:0 portadora:0
colisões:0 txqueuelen:3
RX bytes:67129970 (67.1 MB) TX bytes:3928420 (3.9 MB)
wlan0 Link encap:Ethernet Endereço de HW 00:06:4f:5b:90:4f
inet end.: 169.254.52.14 Bcast:169.254.52.255 Masc:255.255.255.0
endereço inet6: fe80::206:4fff:fe5b:904f/64 Escopo:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Métrica:1
pacotes RX:126927 erros:0 descartados:0 excesso:0 quadro:0
Pacotes TX:45971 erros:0 descartados:0 excesso:0 portadora:0
colisões:0 txqueuelen:1000
RX bytes:82644962 (82.6 MB) TX bytes:5875361 (5.8 MB)
route -nTabela de Roteamento IP do Kernel
Destino Roteador MáscaraGen. Opções Métrica Ref Uso Iface
172.16.14.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0
169.254.52.0 0.0.0.0 255.255.255.0 U 2 0 0 wlan0
169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 wlan0
0.0.0.0 0.0.0.0 0.0.0.0 U 0 0 0 ppp0
lspci00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a1)
00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev a2)
00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2)
00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2)
00:02.0 USB Controller: nVidia Corporation MCP61 USB Controller (rev a2)
00:02.1 USB Controller: nVidia Corporation MCP61 USB Controller (rev a2)
00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev a1)
00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2)
00:06.0 IDE interface: nVidia Corporation MCP61 IDE (rev a2)
00:07.0 Bridge: nVidia Corporation MCP61 Ethernet (rev a2)
00:08.0 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2)
00:09.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2)
00:0b.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2)
00:0c.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2)
00:0d.0 VGA compatible controller: nVidia Corporation C61 [GeForce 6150SE nForce 430] (rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:07.0 Network controller: RaLink RT2561/RT61 802.11g PCI
sudo gedit /etc/network/interfacesauto lo
auto eth0
iface eth0 inet static
address 192.168.137.1
network 192.168.137.0
netmask 255.255.255.0
broadcast 192.168.137.255
sudo gedit /etc/resolv.confnameserver 172.16.14.1
# Generated by NetworkManager
sudo lshw -C network-network
description: Wireless interface
product: RT2561/RT61 802.11g PCI
vendor: RaLink
physical id: 7
bus info: pci@0000:01:07.0
logical name: wlan0
version: 00
serial: 00:06:4f:5b:90:4f
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=rt61pci driverversion=2.6.35-28-generic firmware=N/A ip=169.254.52.14 latency=64 link=yes multicast=yes wireless=IEEE 802.11bg
resources: irq:19 memory:dfff8000-dfffffff
*-network DISABLED
description: Ethernet interface
physical id: 1
logical name: vboxnet0
serial: 0a:00:27:00:00:00
capabilities: ethernet physical
configuration: broadcast=yes multicast=yes
nm-toolNetworkManager Tool
State: connected
- Device: wlan0 [Auto Web_Barro_Infotech_3] -----------------------------------
Type: 802.11 WiFi
Driver: rt61pci
State: connected
Default: no
HW Address: 00:06:4F:5B:90:4F
Capabilities:
Speed: 11 Mb/s
Wireless Properties
WEP Encryption: yes
WPA Encryption: yes
WPA2 Encryption: yes
Wireless Access Points (* = current AP)
Web_Barro_Infotech_2: Infra, 00:15:6D:67:E2:88, Freq 2427 MHz, Rate 11 Mb/s, Strength 54
Barro4-ADL: Infra, 00:02:6F:55:D4:77, Freq 2422 MHz, Rate 11 Mb/s, Strength 42
Barro2-ADL: Infra, 00:0C:42:39:B7:C5, Freq 2462 MHz, Rate 11 Mb/s, Strength 40
Web_Barro_Infotech_1: Infra, 00:15:6D:65:a:F6, Freq 2432 MHz, Rate 11 Mb/s, Strength 51
Barro-ADL: Infra, 00:15:6D:65:93:B4, Freq 2412 MHz, Rate 11 Mb/s, Strength 60
Local_INT_PMB_02:Infra, 00:15:6D:67:AD:21, Freq 2412 MHz, Rate 11 Mb/s, Strength 65 WPA2
Local_INT_PMB_03:Infra, 02:15:6D:67:AD:21, Freq 2412 MHz, Rate 11 Mb/s, Strength 65 WPA2
Barro6-ADL: Infra, 00:15:6D:65:93:A1, Freq 2462 MHz, Rate 11 Mb/s, Strength 71
*Web_Barro_Infotech_3: Infra, 00:15:6D:68:F3:3F, Freq 2447 MHz, Rate 11 Mb/s, Strength 62
MarquesInfo-Centro-1: Infra, 00:15:6D:67:CD:2E, Freq 2432 MHz, Rate 11 Mb/s, Strength 71 WPA2
IPv4 Settings:
Address: 169.254.52.14
Prefix: 24 (255.255.255.0)
Gateway: 0.0.0.0
- Device: eth0 -----------------------------------------------------------------
Type: Wired
Driver: forcedeth
State: disconnected
Default: no
HW Address: 00:1D:60:6D:0B:48
Capabilities:
Carrier Detect: yes
Speed: 100 Mb/s
Wired Properties
Carrier: on