mp4 Foston FS66 2GB : Ubuntu não reconhece. Como resolver ?

[docetrago]

Quando ligo o USB o MP4 liga normalmente. O problema é que não aparece a mídia no desktop para que eu possa acessar.

Aguardo pela ajuda de vocês.

Obrigado.

[Tota]

boas,

Por favor altere o título do seu post para letras minúsculas pois o mesmo será trancado ficando como está.

Verifique no se mp4 se ele tem alguma opção para transferencia de arquivos.

Quando conectar seu mp4, digite em terminal

sudo lsusb

e depois

sudo dmesg

Anote o resultado referente ao seu mp4 e poste aqui.

Isto vai facilitar muito ajudá-lo.

[],s

[docetrago]

Tota,

grato pela atenção e cortesia !

Segue o resultado dos comandos ( em 2 posts ) :

docetrago@docetrago-desktop:~$ sudo lsusb
[sudo] password for docetrago:
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 006: ID 10d6:1101 Actions Semiconductor Co., Ltd D-Wave 2GB MP4 Player
Bus 001 Device 005: ID 15d9:0a4c 
Bus 001 Device 004: ID 062a:0201 Creative Labs Defender Office Keyboard (K7310) S Zodiak KM-9010
Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
docetrago@docetrago-desktop:~$ sudo dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.27-7-generic (buildd@rothera) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu10) ) #1 SMP Fri Oct 24 06:42:44 UTC 2008 (Ubuntu 2.6.27-7.14-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003dfc0000 (usable)
[    0.000000]  BIOS-e820: 000000003dfc0000 - 000000003dfd0000 (ACPI data)
[    0.000000]  BIOS-e820: 000000003dfd0000 - 000000003e000000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
[    0.000000] last_pfn = 0x3dfc0 max_arch_pfn = 0x100000
[    0.000000] kernel direct mapping tables up to 38000000 @ 7000-c000
[    0.000000] RAMDISK: 37824000 - 37fef47e
[    0.000000] DMI 2.3 present.
[    0.000000] ACPI: RSDP 000FB230, 0014 (r0 ACPIAM)
[    0.000000] ACPI: RSDT 3DFC0000, 0030 (r1 A M I  OEMRSDT   9000507 MSFT       97)
[    0.000000] ACPI: FACP 3DFC0200, 0081 (r2 A M I  OEMFACP   9000507 MSFT       97)
[    0.000000] ACPI: DSDT 3DFC03F0, 3710 (r1  A0274 A0274020       20 INTL  2002026)
[    0.000000] ACPI: FACS 3DFD0000, 0040
[    0.000000] ACPI: APIC 3DFC0390, 005C (r1 A M I  OEMAPIC   9000507 MSFT       97)
[    0.000000] ACPI: OEMB 3DFD0040, 0040 (r1 A M I  AMI_OEM   9000507 MSFT       97)
[    0.000000] 95MB HIGHMEM available.
[    0.000000] 896MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 38000000
[    0.000000]   low ram: 00000000 - 38000000
[    0.000000]   bootmap 00008000 - 0000f000
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 0038000000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0000100000 - 00005c0a20]    TEXT DATA BSS ==> [0000100000 - 00005c0a20]
[    0.000000]   #4 [0037824000 - 0037fef47e]          RAMDISK ==> [0037824000 - 0037fef47e]
[    0.000000]   #5 [00005c1000 - 00005c4000]    INIT_PG_TABLE ==> [00005c1000 - 00005c4000]
[    0.000000]   #6 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
[    0.000000]   #7 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
[    0.000000]   #8 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
[    0.000000] found SMP MP-table at [c00ff780] 000ff780
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x00038000
[    0.000000]   HighMem  0x00038000 -> 0x0003dfc0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0003dfc0
[    0.000000] On node 0 totalpages: 253791
[    0.000000] free_area_init_node: node 0, pgdat c048a500, node_mem_map c1000000
[    0.000000]   DMA zone: 3963 pages, LIFO batch:0
[    0.000000]   Normal zone: 223300 pages, LIFO batch:31
[    0.000000]   HighMem zone: 24296 pages, LIFO batch:3
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[    0.000000] mapped APIC to ffffb000 (fee00000)
[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[    0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 40000000 (gap: 3e000000:c17c0000)
[    0.000000] PERCPU: Allocating 41628 bytes of per cpu data
[    0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 251559
[    0.000000] Kernel command line: root=UUID=98deaf7c-1e33-4e50-ac3b-37be6ec9ccfc ro locale=pt_BR quiet splash
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] TSC: Unable to calibrate against PIT
[    0.000000] TSC: using PMTIMER reference calibration
[    0.000000] Detected 2261.428 MHz processor.
[    0.004000] Console: colour VGA+ 80x25
[    0.004000] console [tty0] enabled
[    0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.004000] Memory: 992260k/1015552k available (2572k kernel code, 22716k reserved, 1160k data, 424k init, 98048k highmem)
[    0.004000] virtual kernel memory layout:
[    0.004000]     fixmap  : 0xffc77000 - 0xfffff000   (3616 kB)
[    0.004000]     pkmap   : 0xff400000 - 0xff800000   (4096 kB)
[    0.004000]     vmalloc : 0xf8800000 - 0xff3fe000   ( 107 MB)
[    0.004000]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[    0.004000]       .init : 0xc04ab000 - 0xc0515000   ( 424 kB)
[    0.004000]       .data : 0xc038329a - 0xc04a5680   (1160 kB)
[    0.004000]       .text : 0xc0100000 - 0xc038329a   (2572 kB)
[    0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[    0.004000] SLUB: Genslabs=12, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.004021] Calibrating delay loop (skipped), value calculated using timer frequency.. 4522.85 BogoMIPS (lpj=9045712)
[    0.004056] Security Framework initialized
[    0.004074] SELinux:  Disabled at boot.
[    0.004115] AppArmor: AppArmor initialized
[    0.004136] Mount-cache hash table entries: 512
[    0.004471] Initializing cgroup subsys ns
[    0.004481] Initializing cgroup subsys cpuacct
[    0.004485] Initializing cgroup subsys memory
[    0.004515] CPU: Trace cache: 12K uops, L1 D cache: 8K
[    0.004520] CPU: L2 cache: 512K
[    0.004524] CPU: Hyper-Threading is disabled
[    0.004549] Checking 'hlt' instruction... OK.
[    0.020714] SMP alternatives: switching to UP code
[    0.030579] ACPI: Core revision 20080609
[    0.033250] ACPI: Checking initramfs for custom DSDT
[    0.454155] ENABLING IO-APIC IRQs
[    0.454342] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.494037] CPU0: Intel(R) Pentium(R) 4 CPU 2.26GHz stepping 05
[    0.496031] Brought up 1 CPUs
[    0.496031] Total of 1 processors activated (4522.85 BogoMIPS).
[    0.496031] CPU0 attaching sched-domain:
[    0.496031]  domain 0: span 0 level CPU
[    0.496031]   groups: 0
[    0.496031] net_namespace: 840 bytes
[    0.496031] Booting paravirtualized kernel on bare hardware
[    0.496031] Time: 18:44:56  Date: 04/12/09
[    0.496031] NET: Registered protocol family 16
[    0.496031] EISA bus registered
[    0.496031] ACPI: bus type pci registered
[    0.496031] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
[    0.496031] PCI: Using configuration type 1 for base access
[    0.498069] ACPI: EC: Look up EC in DSDT
[    0.511416] ACPI: Interpreter enabled
[    0.511423] ACPI: (supports S0 S1 S3 S4 S5)
[    0.511450] ACPI: Using IOAPIC for interrupt routing
[    0.524996] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.525128] PCI: 0000:00:00.0 reg 10 32bit mmio: [e0000000, e3ffffff]
[    0.525314] PCI: 0000:00:02.5 reg 10 io port: [0, 7]
[    0.525323] PCI: 0000:00:02.5 reg 14 io port: [0, 3]
[    0.525331] PCI: 0000:00:02.5 reg 18 io port: [0, 7]
[    0.525339] PCI: 0000:00:02.5 reg 1c io port: [0, 3]
[    0.525348] PCI: 0000:00:02.5 reg 20 io port: [ffa0, ffaf]
[    0.525379] pci 0000:00:02.5: PME# supported from D3cold
[    0.525385] pci 0000:00:02.5: PME# disabled
[    0.525421] PCI: 0000:00:02.7 reg 10 io port: [d800, d8ff]
[    0.525430] PCI: 0000:00:02.7 reg 14 io port: [d400, d47f]
[    0.525477] pci 0000:00:02.7: supports D1
[    0.525480] pci 0000:00:02.7: supports D2
[    0.525482] pci 0000:00:02.7: PME# supported from D3hot D3cold
[    0.525488] pci 0000:00:02.7: PME# disabled
[    0.525510] PCI: 0000:00:03.0 reg 10 32bit mmio: [d7efc000, d7efcfff]
[    0.525570] PCI: 0000:00:03.1 reg 10 32bit mmio: [d7efd000, d7efdfff]
[    0.525635] PCI: 0000:00:03.2 reg 10 32bit mmio: [d7efe000, d7efefff]
[    0.525710] PCI: 0000:00:03.3 reg 10 32bit mmio: [d7eff000, d7efffff]
[    0.525761] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
[    0.525766] pci 0000:00:03.3: PME# disabled
[    0.525807] PCI: 0000:00:04.0 reg 10 io port: [d000, d0ff]
[    0.525816] PCI: 0000:00:04.0 reg 14 32bit mmio: [d7efb000, d7efbfff]
[    0.525847] PCI: 0000:00:04.0 reg 30 32bit mmio: [d7ec0000, d7edffff]
[    0.525865] pci 0000:00:04.0: supports D1
[    0.525867] pci 0000:00:04.0: supports D2
[    0.525870] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.525875] pci 0000:00:04.0: PME# disabled
[    0.525897] PCI: 0000:00:05.0 reg 10 io port: [c800, c807]
[    0.525905] PCI: 0000:00:05.0 reg 14 io port: [c400, c403]
[    0.525913] PCI: 0000:00:05.0 reg 18 io port: [c000, c007]
[    0.525922] PCI: 0000:00:05.0 reg 1c io port: [b800, b803]
[    0.525930] PCI: 0000:00:05.0 reg 20 io port: [b400, b40f]
[    0.525987] PCI: 0000:00:09.0 reg 10 32bit mmio: [d7efac00, d7efacff]
[    0.525996] PCI: 0000:00:09.0 reg 14 io port: [b000, b007]
[    0.526004] PCI: 0000:00:09.0 reg 18 io port: [a800, a8ff]
[    0.526045] pci 0000:00:09.0: supports D2
[    0.526047] pci 0000:00:09.0: PME# supported from D2 D3hot
[    0.526053] pci 0000:00:09.0: PME# disabled
[    0.526128] PCI: 0000:01:00.0 reg 10 32bit mmio: [d8000000, dfffffff]
[    0.526136] PCI: 0000:01:00.0 reg 14 32bit mmio: [d7fe0000, d7ffffff]
[    0.526143] PCI: 0000:01:00.0 reg 18 io port: [e800, e87f]
[    0.526176] pci 0000:01:00.0: supports D1
[    0.526178] pci 0000:01:00.0: supports D2
[    0.526217] PCI: bridge 0000:00:01.0 io port: [e000, efff]
[    0.526223] PCI: bridge 0000:00:01.0 32bit mmio: [d7f00000, d7ffffff]
[    0.526229] PCI: bridge 0000:00:01.0 32bit mmio pref: [d8000000, dfffffff]
[    0.526240] bus 00 -> node 0
[    0.526250] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.537595] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15)
[    0.537806] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 12 14 15)
[    0.538017] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 12 14 15)
[    0.538222] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 12 14 15)
[    0.538428] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 *11 12 14 15)
[    0.538635] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 7 10 11 12 14 15)
[    0.538844] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 *11 12 14 15)
[    0.539050] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 7 10 11 12 14 15)
[    0.539357] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 06, should be F9 [20080609]
[    0.539372] Linux Plug and Play Support v0.97 (c) Adam Belay
[    0.539697] pnp: PnP ACPI init
[    0.539712] ACPI: bus type pnp registered
[    0.546800] pnp: PnP ACPI: found 12 devices
[    0.546804] ACPI: ACPI bus type pnp unregistered
[    0.546810] PnPBIOS: Disabled by ACPI PNP
[    0.547460] PCI: Using ACPI for IRQ routing
[    0.547636] NET: Registered protocol family 8
[    0.547636] NET: Registered protocol family 20
[    0.547636] NetLabel: Initializing
[    0.547636] NetLabel:  domain hash size = 128
[    0.547636] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.547636] NetLabel:  unlabeled traffic allowed by default
[    0.548576] tracer: 772 pages allocated for 65536 entries of 48 bytes
[    0.548580]    actual entries 65620
[    0.548848] AppArmor: AppArmor Filesystem Enabled
[    0.548870] ACPI: RTC can wake from S4
[    0.548963] system 00:07: ioport range 0x290-0x297 has been reserved
[    0.548976] system 00:08: ioport range 0x480-0x48f has been reserved
[    0.548980] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[    0.548984] system 00:08: ioport range 0x800-0x8df has been reserved
[    0.548988] system 00:08: ioport range 0x8e0-0x8ff has been reserved
[    0.548994] system 00:08: iomem range 0xffe80000-0xffefffff could not be reserved
[    0.549005] system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
[    0.549009] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.549013] system 00:0a: iomem range 0xfff80000-0xffffffff could not be reserved
[    0.549023] system 00:0b: iomem range 0x0-0x9ffff could not be reserved
[    0.549026] system 00:0b: iomem range 0xc0000-0xdffff could not be reserved
[    0.549030] system 00:0b: iomem range 0xe0000-0xfffff could not be reserved
[    0.549034] system 00:0b: iomem range 0x100000-0x3dffffff could not be reserved
[    0.584505] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.584511] pci 0000:00:01.0:   IO window: 0xe000-0xefff
[    0.584519] pci 0000:00:01.0:   MEM window: 0xd7f00000-0xd7ffffff
[    0.584525] pci 0000:00:01.0:   PREFETCH window: 0x000000d8000000-0x000000dfffffff
[    0.584548] bus: 00 index 0 io port: [0, ffff]
[    0.584551] bus: 00 index 1 mmio: [0, ffffffff]
[    0.584554] bus: 01 index 0 io port: [e000, efff]
[    0.584557] bus: 01 index 1 mmio: [d7f00000, d7ffffff]
[    0.584560] bus: 01 index 2 mmio: [d8000000, dfffffff]
[    0.584563] bus: 01 index 3 mmio: [0, 0]
[    0.584590] NET: Registered protocol family 2
[    0.584822] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.585330] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.586618] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.587360] TCP: Hash tables configured (established 131072 bind 65536)
[    0.587367] TCP reno registered
[    0.587650] NET: Registered protocol family 1
[    0.587866] checking if image is initramfs... it is
[    1.088079] Switched to high resolution mode on CPU 0
[    1.474817] Freeing initrd memory: 7981k freed
[    1.475945] audit: initializing netlink socket (disabled)
[    1.475973] type=2000 audit(1239561896.472:1): initialized
[    1.482086] highmem bounce pool size: 64 pages
[    1.482100] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    1.485687] VFS: Disk quotas dquot_6.5.1
[    1.485837] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.486017] msgmni has been set to 1762
[    1.486233] io scheduler noop registered
[    1.486238] io scheduler anticipatory registered
[    1.486241] io scheduler deadline registered
[    1.486267] io scheduler cfq registered (default)
[    2.000039] pci 0000:01:00.0: Boot video device
[    2.000620] isapnp: Scanning for PnP cards...
[    2.354177] isapnp: No Plug & Play device found
[    2.425906] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[    2.426080] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    2.427401] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    2.430406] brd: module loaded
[    2.430526] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[    2.430833] PNP: No PS/2 controller found. Probing ports directly.
[    2.431225] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.431235] serio: i8042 AUX port at 0x60,0x64 irq 12

[docetrago]

( continuação )


[    2.432303] mice: PS/2 mouse device common for all mice
[    2.432584] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    2.432616] rtc0: alarms up to one month
[    2.432839] EISA: Probing bus 0 at eisa.0
[    2.432878] EISA: Detected 0 cards.
[    2.432884] cpuidle: using governor ladder
[    2.432887] cpuidle: using governor menu
[    2.433657] TCP cubic registered
[    2.433706] Using IPI No-Shortcut mode
[    2.434135] registered taskstats version 1
[    2.434289]   Magic number: 5:482:746
[    2.434494] rtc_cmos 00:02: setting system clock to 2009-04-12 18:44:57 UTC (1239561897)
[    2.434499] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    2.434502] EDD information not available.
[    2.435121] Freeing unused kernel memory: 424k freed
[    2.435193] Write protecting the kernel text: 2576k
[    2.435234] Write protecting the kernel read-only data: 936k
[    2.686125] fuse init (API version 7.9)
[    2.856410] processor ACPI0007:00: registered as cooling_device0
[    2.856420] ACPI: Processor [CPU1] (supports 8 throttling states)
[    3.677724] No dock devices found.
[    3.786688] SCSI subsystem initialized
[    3.808939] usbcore: registered new interface driver usbfs
[    3.808984] usbcore: registered new interface driver hub
[    3.842591] usbcore: registered new device driver usb
[    3.862336] sis900.c: v1.08.10 Apr. 2 2006
[    3.890028] sis900 0000:00:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    3.891182] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
[    3.902680] 0000:00:04.0: Using transceiver found at address 1 as default
[    3.923977] eth0: SiS 900 PCI Fast Ethernet at 0xd000, IRQ 19, 00:15:f2:78:4a:e7
[    3.933057] ehci_hcd 0000:00:03.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[    3.933078] ehci_hcd 0000:00:03.3: EHCI Host Controller
[    3.933171] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
[    3.933220] ehci_hcd 0000:00:03.3: cache line size of 128 is not supported
[    3.933239] ehci_hcd 0000:00:03.3: irq 23, io mem 0xd7eff000
[    3.940101] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.942474] libata version 3.00 loaded.
[    3.945435] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    3.945724] usb usb1: configuration #1 chosen from 1 choice
[    3.945780] hub 1-0:1.0: USB hub found
[    3.945798] hub 1-0:1.0: 8 ports detected
[    4.152515] pata_sis 0000:00:02.5: version 0.5.2
[    4.152549] pata_sis 0000:00:02.5: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    4.154160] scsi0 : pata_sis
[    4.154361] scsi1 : pata_sis
[    4.155631] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    4.155635] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    4.264086] usb 1-2: new high speed USB device using ehci_hcd and address 2
[    4.316488] ata1.00: ATA-7: SAMSUNG SP0411N, TW100-11, max UDMA/100
[    4.316495] ata1.00: 78242976 sectors, multi 16: LBA48
[    4.324487] ata1.00: configured for UDMA/100
[    4.397785] usb 1-2: configuration #1 chosen from 1 choice
[    4.398073] hub 1-2:1.0: USB hub found
[    4.398384] hub 1-2:1.0: 4 ports detected
[    4.496333] ata2.00: ATAPI: HL-DT-ST RW/DVD GCC-4521B, 1.04, max UDMA/33
[    4.496365] ata2.01: ATAPI: TSSTcorp CDDVDW SH-S202J, SB01, max UDMA/66
[    4.496385] ata2.01: limited to UDMA/33 due to 40-wire cable
[    4.512351] ata2.00: configured for UDMA/33
[    4.528338] ata2.01: configured for UDMA/33
[    4.528543] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG SP0411N  TW10 PQ: 0 ANSI: 5
[    4.529214] scsi 1:0:0:0: CD-ROM            HL-DT-ST RW/DVD GCC-4521B 1.04 PQ: 0 ANSI: 5
[    4.530002] scsi 1:0:1:0: CD-ROM            TSSTcorp CDDVDW SH-S202J  SB01 PQ: 0 ANSI: 5
[    4.530173] ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    4.530195] ohci_hcd 0000:00:03.0: OHCI Host Controller
[    4.530251] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
[    4.530286] ohci_hcd 0000:00:03.0: irq 20, io mem 0xd7efc000
[    4.586335] usb usb2: configuration #1 chosen from 1 choice
[    4.586382] hub 2-0:1.0: USB hub found
[    4.586402] hub 2-0:1.0: 3 ports detected
[    4.676418] usb 1-2.2: new full speed USB device using ehci_hcd and address 3
[    4.688498] ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    4.688524] ohci_hcd 0000:00:03.1: OHCI Host Controller
[    4.688570] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
[    4.688605] ohci_hcd 0000:00:03.1: irq 21, io mem 0xd7efd000
[    4.746384] usb usb3: configuration #1 chosen from 1 choice
[    4.746431] hub 3-0:1.0: USB hub found
[    4.746452] hub 3-0:1.0: 3 ports detected
[    4.769395] usb 1-2.2: configuration #1 chosen from 1 choice
[    4.840420] usb 1-2.3: new low speed USB device using ehci_hcd and address 4
[    4.848489] ohci_hcd 0000:00:03.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[    4.848514] ohci_hcd 0000:00:03.2: OHCI Host Controller
[    4.848561] ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4
[    4.848594] ohci_hcd 0000:00:03.2: irq 22, io mem 0xd7efe000
[    4.906401] usb usb4: configuration #1 chosen from 1 choice
[    4.906448] hub 4-0:1.0: USB hub found
[    4.906468] hub 4-0:1.0: 2 ports detected
[    4.938301] usb 1-2.3: configuration #1 chosen from 1 choice
[    5.018053] usb 1-2.4: new low speed USB device using ehci_hcd and address 5
[    5.022050] sata_sis 0000:00:05.0: version 1.0
[    5.022081] sata_sis 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    5.022089] sata_sis 0000:00:05.0: Detected SiS 180/181/964 chipset in SATA mode
[    5.033444] scsi2 : sata_sis
[    5.035629] scsi3 : sata_sis
[    5.036356] ata3: SATA max UDMA/133 cmd 0xc800 ctl 0xc400 bmdma 0xb400 irq 17
[    5.036364] ata4: SATA max UDMA/133 cmd 0xc000 ctl 0xb800 bmdma 0xb408 irq 17
[    5.059284] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[    5.059344] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[    5.059399] scsi 1:0:1:0: Attached scsi generic sg2 type 5
[    5.113474] usb 1-2.4: configuration #1 chosen from 1 choice
[    5.164278] Driver 'sd' needs updating - please use bus_type methods
[    5.164473] sd 0:0:0:0: [sda] 78242976 512-byte hardware sectors (40060 MB)
[    5.164505] sd 0:0:0:0: [sda] Write Protect is off
[    5.164509] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.164557] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.164672] sd 0:0:0:0: [sda] 78242976 512-byte hardware sectors (40060 MB)
[    5.164700] sd 0:0:0:0: [sda] Write Protect is off
[    5.164704] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.164752] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.164759]  sda:<4>Driver 'sr' needs updating - please use bus_type methods
[    5.172494]  sda1 sda2 < sda5 > sda3 sda4
[    5.230840] sd 0:0:0:0: [sda] Attached SCSI disk
[    5.238082] sr0: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray
[    5.238092] Uniform CD-ROM driver Revision: 3.20
[    5.238254] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    5.241827] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    5.241996] sr 1:0:1:0: Attached scsi CD-ROM sr1
[    5.242123] usbcore: registered new interface driver hiddev
[    5.245429] input: USB-compliant keyboard as /devices/pci0000:00/0000:00:03.3/usb1/1-2/1-2.3/1-2.3:1.0/input/input1
[    5.260388] input,hidraw0: USB HID v1.10 Keyboard [USB-compliant keyboard] on usb-0000:00:03.3-2.3
[    5.266238] input: USB-compliant keyboard as /devices/pci0000:00/0000:00:03.3/usb1/1-2/1-2.3/1-2.3:1.1/input/input2
[    5.280405] input,hiddev96,hidraw1: USB HID v1.10 Mouse [USB-compliant keyboard] on usb-0000:00:03.3-2.3
[    5.282631] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:03.3/usb1/1-2/1-2.4/1-2.4:1.0/input/input3
[    5.296365] input,hidraw2: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:03.3-2.4
[    5.296403] usbcore: registered new interface driver usbhid
[    5.296409] usbhid: v2.6:USB HID core driver
[    5.370828] ata3: SATA link down (SStatus 0 SControl 300)
[    5.698805] ata4: SATA link down (SStatus 0 SControl 300)
[    6.190393] PM: Starting manual resume from disk
[    6.190401] PM: Resume from partition 8:5
[    6.190403] PM: Checking hibernation image.
[    6.190668] PM: Resume from disk failed.
[    6.253914] kjournald starting.  Commit interval 5 seconds
[    6.253941] EXT3-fs: mounted filesystem with ordered data mode.
[   11.652309] udevd version 124 started
[   12.476681] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   12.552146] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   12.632591] Linux agpgart interface v0.103
[   12.745720] agpgart-sis 0000:00:00.0: SiS chipset [1039/0661]
[   12.750935] agpgart-sis 0000:00:00.0: AGP aperture is 64M @ 0xe0000000
[   13.425414] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[   13.440135] ACPI: Power Button (FF) [PWRF]
[   13.440380] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
[   13.456061] ACPI: Power Button (CM) [PWRB]
[   14.135851] parport_pc 00:06: reported by Plug and Play ACPI
[   14.135960] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[   14.635904] Intel ICH 0000:00:02.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[   14.956046] intel8x0_measure_ac97_clock: measured 54753 usecs
[   14.956052] intel8x0: clocking to 48000
[   15.125329] Linux video capture interface: v2.00
[   15.333550] sn9c102: V4L2 driver for SN9C1xx PC Camera Controllers v1:1.47pre49
[   15.334961] usb 1-2.2: SN9C105 PC Camera Controller detected (vid:pid 0x045E:0x00F7)
[   15.365375] usb 1-2.2: No supported image sensor detected for this bridge
[   15.365481] usbcore: registered new interface driver sn9c102
[   15.460414] usbcore: registered new interface driver snd-usb-audio
[   16.256385] input: PC Speaker as /devices/platform/pcspkr/input/input6
[   20.673749] lp0: using parport0 (interrupt-driven).
[   20.911982] Adding 1646620k swap on /dev/sda5.  Priority:-1 extents:1 across:1646620k
[   21.511568] EXT3 FS on sda1, internal journal
[   22.748413] type=1505 audit(1239561918.259:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4162
[   22.995458] type=1505 audit(1239561918.503:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4167
[   22.995886] type=1505 audit(1239561918.503:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4167
[   23.172327] ip_tables: (C) 2000-2006 Netfilter Core Team
[   24.125490] ACPI: WMI: Mapper loaded
[   25.378983] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[   25.476043] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[   25.476054] apm: overridden by ACPI.
[   25.682339] ppdev: user-space parallel port driver
[   28.062113] Bluetooth: Core ver 2.13
[   28.065344] NET: Registered protocol family 31
[   28.065354] Bluetooth: HCI device and connection manager initialized
[   28.065360] Bluetooth: HCI socket layer initialized
[   28.091426] Bluetooth: L2CAP ver 2.11
[   28.091436] Bluetooth: L2CAP socket layer initialized
[   28.109557] Bluetooth: SCO (Voice Link) ver 0.6
[   28.109567] Bluetooth: SCO socket layer initialized
[   28.145096] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   28.145106] Bluetooth: BNEP filters: protocol multicast
[   28.180852] Bridge firewalling registered
[   28.181497] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
[   28.303653] Bluetooth: RFCOMM socket layer initialized
[   28.304115] Bluetooth: RFCOMM TTY layer initialized
[   28.304127] Bluetooth: RFCOMM ver 1.10
[   32.624613] NET: Registered protocol family 17
[   34.429154] eth0: Media Link On 100mbps full-duplex
[  202.297853] ppdev0: registered pardevice
[  202.344633] ppdev0: unregistered pardevice
[  202.485100] ppdev0: registered pardevice
[  202.532484] ppdev0: unregistered pardevice
[  204.023777] ppdev0: registered pardevice
[  204.080475] ppdev0: unregistered pardevice
[  204.271573] type=1503 audit(1239562099.779:5): operation="inode_permission" requested_mask="r::" denied_mask="r::" fsuid=7 name="/proc/5956/net/" pid=5956 profile="/usr/sbin/cupsd"
[  205.308572] type=1503 audit(1239562100.819:6): operation="inode_permission" requested_mask="r::" denied_mask="r::" fsuid=7 name="/proc/5961/net/" pid=5961 profile="/usr/sbin/cupsd"
[  205.433254] NET: Registered protocol family 10
[  205.436442] lo: Disabled Privacy Extensions
[  205.438848] type=1503 audit(1239562100.947:7): operation="socket_create" family="ax25" sock_type="dgram" protocol=0 pid=5961 profile="/usr/sbin/cupsd"
[  205.438868] type=1503 audit(1239562100.947:: operation="socket_create" family="netrom" sock_type="seqpacket" protocol=0 pid=5961 profile="/usr/sbin/cupsd"
[  205.438878] type=1503 audit(1239562100.947:9): operation="socket_create" family="rose" sock_type="dgram" protocol=0 pid=5961 profile="/usr/sbin/cupsd"
[  205.438887] type=1503 audit(1239562100.947:10): operation="socket_create" family="ipx" sock_type="dgram" protocol=0 pid=5961 profile="/usr/sbin/cupsd"
[  205.438895] type=1503 audit(1239562100.947:11): operation="socket_create" family="appletalk" sock_type="dgram" protocol=0 pid=5961 profile="/usr/sbin/cupsd"
[  205.438903] type=1503 audit(1239562100.947:12): operation="socket_create" family="econet" sock_type="dgram" protocol=0 pid=5961 profile="/usr/sbin/cupsd"
[  205.438912] type=1503 audit(1239562100.947:13): operation="socket_create" family="ash" sock_type="dgram" protocol=0 pid=5961 profile="/usr/sbin/cupsd"
[  205.438920] type=1503 audit(1239562100.947:14): operation="socket_create" family="x25" sock_type="seqpacket" protocol=0 pid=5961 profile="/usr/sbin/cupsd"
[  215.788029] eth0: no IPv6 routers present
[  963.497255] usb 1-2.2: USB disconnect, address 3
[ 1015.152349] usb 1-2.1: new high speed USB device using ehci_hcd and address 6
[ 1015.272700] usb 1-2.1: configuration #1 chosen from 1 choice
[ 1015.431396] usbcore: registered new interface driver libusual
[ 1015.457785] Initializing USB Mass Storage driver...
[ 1015.461403] scsi4 : SCSI emulation for USB Mass Storage devices
[ 1015.463342] usbcore: registered new interface driver usb-storage
[ 1015.463764] USB Mass Storage support registered.
[ 1015.464241] usb-storage: device found at 6
[ 1015.464250] usb-storage: waiting for device to settle before scanning
[ 1020.464334] usb-storage: device scan complete
[ 1020.465408] scsi scan: INQUIRY result too short (5), using 36
[ 1020.465422] scsi 4:0:0:0: Direct-Access     GENERIC  USB DISK DEVICE  1.00 PQ: 0 ANSI: 0 CCS
[ 1020.479505] sd 4:0:0:0: [sdb] 3986353 512-byte hardware sectors (2041 MB)
[ 1020.480588] sd 4:0:0:0: [sdb] Write Protect is off
[ 1020.480599] sd 4:0:0:0: [sdb] Mode Sense: 00 c0 00 00
[ 1020.480605] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 1020.483138] sd 4:0:0:0: [sdb] 3986353 512-byte hardware sectors (2041 MB)
[ 1020.484285] sd 4:0:0:0: [sdb] Write Protect is off
[ 1020.484297] sd 4:0:0:0: [sdb] Mode Sense: 00 c0 00 00
[ 1020.484301] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 1020.485056]  sdb: sdb1
[ 1020.543985] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 1020.544689] sd 4:0:0:0: Attached scsi generic sg3 type 0
docetrago@docetrago-desktop:~$

[Tota]

oba,

Como se pode ver pelo resultado de lsusb e
dmesg, seu mp4 foi identificado e reconhecido como sdb1.

O que ele não foi é montado.

Isto pode ter acontecido por duas razões:

1) Ele foi desconectado inesperadamente e  o windows ou o linux marcou a partição como "suja".

Se voce tiver uma máquina com windows à mão, faça um chkdsk /r nele ou scandisk, se só tiver o Linux Um sudo cfdisk /etc/sdb também resolve, mas neste caso cuidado para não apagar o conteúdo do seu mp4.


2) A partição está com propriedades de acesso apenas pelo administrador(root)

Aqui neste caso basta trocar as permissões de acesso para seu usuário com sudo chmod 777 -r /dev/sd1.

Além destes dois fatos mais comuns, existem outros, dentre eles um mal gerenciamento na detecção pelo módulo hal o que resultaria em ter que editar o seu fstab ou mesmo o hal, isto assumindo que seu mp4 e o respectivo cabo usb estejam em ordem.

mas deixe isto prá la e vamos nos concentrar na primeira. Depois veremos às outras.

[],s

[docetrago]

Vamos então :

1) sudo cfdisk /etc/sdb

ERRO FATAL: Não foi possível abrir a unidade de disco. Pressione qualquer tecla para sair do cfdisk

[Tota]

opps,

desculpe,

sudo cfdisk /dev/sdb1

Isto faz voce pelo menos ver que seu disto está lá.

Se voce tiver o 8.04 ou 8.10 instale o qtparted que ele faz isto para voce em modo grafico o que fica mais facil.( tem até um scandisk nele )

Se quiser ver se como root voce monta o disco,

sudo nautilus

e procure ele na pasta media, clique com o botão direito e peça para montar ( isto no caso da partição estar limpa )


[],s

[docetrago]

Tota,

eis o que acontece :

1. Resultado de

sudo cfdisk /dev/sdb


cfdisk (util-linux-ng 2.14)

                                Disco: /dev/sdb
                       Tamanho: 2041012736 bytes, 2041 MB
              Cabeças: 63 Setores por Trilha: 62 Cilindros: 1020

    Nome        Opções   Tipo Part. Tipo SA          [Rótulo]      Tamanho (M
B------------------------------------------------------------------------------
                            Pri/lóg  Espaço livre                     2039,87

     [  Ajuda   ]  [   Nova   ]  [  Mostre  ]  [   Sair   ]  [ Unidades ] [  Gravar  ]

                             Mostrar tela de ajuda


2. Resultado de

sudo cfdisk /dev/sdb1

            ERRO FATAL: Não foi possível abrir a unidade de disco
                  Pressione qualquer tecla para sair do cfdisk

3. O qtparted reconhece o mp4, listando como :

Device : /dev/sdb
Model : GENERIC USB DISK DEVICE
Capacity ( Mb) : 1946.46
Length sectors : 3986353
Status : available

Também informa :

Number : 01
Partition : /dev/sdb-1
Type : free
Status :
Size : 1.90GB
Used space : N/A
Start : 0.00 MB
End : 1.90 GB
Label :

Diante dessas informações, tem como fazer o Ubuntu reconhece-lo ?

[Tota]

vamos lá,

Como voce viu, o Linux não está reconhecendo uma partição Fat32 ou  16, padrão nos tocadores de mp3.

Então o mais prudente para voce não perder seus dados é plugar ele numa máquina com windows e passar um scandisk como falei no inicio.

Isto pode ser feito no Linux pelo pacote qtparted encontrado víia synaptic, porém sempre tenha em mente que partições Fat do windows são  problema no Linux, pois não  são nativas do sistema.

Alternativamente voce pode "forçar" a montagem do volume  com o comando mount.

Para agilizar, visto as respostas e réplicas via posts demorarem, de uma pesquisada aquí no forum por mount

Eu não estou no Linux agora, mas como exemplo apenas seu comando ficaria mais ou menos assim:

mount -t -force /dev/sdb1 /media 

veja no forum a sintaxe correta.

Lembre que a chave -force pode corromper dados em partições Fat.

Como seu mp4 foi reconhecido e identificado é só uma questão de montar o mp4.

[],s

[docetrago]

Tota,

está assim a situação :

1. Formatei /dev/sdb1 como ext3 fazendo sudo mkfs.ext3 /dev/sdb1 :

docetrago@docetrago:~$ sudo mkfs.ext3 /dev/sdb1
mke2fs 1.41.3 (12-Oct-2008)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
124672 inodes, 498007 blocks
24900 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=511705088
16 block groups
32768 blocks per group, 32768 fragments per group
7792 inodes per group
Superblock backups stored on blocks:
   32768, 98304, 163840, 229376, 294912

Writing inode tables: done                           
Creating journal (8192 blocks): done
Writing superblocks and filesystem accounting information: done

This filesystem will be automatically checked every 29 mounts or
180 days, whichever comes first.  Use tune2fs -c or -i to override.
docetrago@docetrago:~$

2. Depois criei o diretório mp4 em /mnt

docetrago@docetrago:~$ sudo mkdir /mnt/mp4
docetrago@docetrago:~$ cd /mnt
docetrago@docetrago:/mnt$ ls
mp4
docetrago@docetrago:/mnt$

3. Montagem :

docetrago@docetrago:~$ sudo mount /dev/sdb1 /mnt/mp4 -w -t ext3

4. Feito isso, aparece na Área de Trabalho o ícone Mídia de 2.0 GB.

Acontece que quando eu clico no ícone, abre-se a pasta contendo apenas uma pasta chamada Lost+Found. Então eu vou lá no Painel superior da Área de Trabalho, clico em Locais, seleciono Músicas, selecionou uma pasta qualquer com meus arquivos e arrasto para a pasta do mp4. Aparece a mensagem : Erro ao copiar, A pasta "Michael Schenker" não pode ser copiada porque você não tem permissões para criá-la no destino.

Tenho de estudar mais Linux, e por isso to aqui trocando idéias com você !

Grande abraço e obrigado !

[docetrago]

Tota, to quase lá !!!

fiz um teste aqui agora, espetei outro mp3 que tenho e funcionou beleza.

O que acontece de diferente é que no mp4 ( que é o que está problemático ), ao clicar na pasta LOST+FOUND, eu vejo que as PERMISSÕES estão todas em ROOT. E ainda dá a mensagem : "Você não é o proprietário, logo você não pode alterar estas permissões."

No mp3, que deu certo de abrir os arquivos, as permissões estão todas no meu usuário comum, que pode ler e escrever normalmente.

Será que é isso então que tá me atrapalhando ? Como faço pra alterar as permissões de acesso

chmod ? chown ?

Abraço !

[Tota]

Voce acertou na mosca!
Como voce pode ver Linux não é assim um bicho tão hermetico, ao contrario.

Vai em:

terminal=> sudo su=> chmod 666 -r /dev/sdb1 (novamente da uma checada aquí no forum por pen drive para checar a sintaxe)  [Ó maldito smartfone que me faz ficar longe do meu laptop ]

Seu problema apenas foi ter formatado em ext3 se algum dia precisar usar ele como pendrive no windows.Mas ai é só formatar em Fat.

[],s

[Palozo]

boas,

Por favor altere o título do seu post para letras minúsculas pois o mesmo será trancado ficando como está.

Verifique no se mp4 se ele tem alguma opção para transferencia de arquivos.

Quando conectar seu mp4, digite em terminal

sudo lsusb

e depois

sudo dmesg

Anote o resultado referente ao seu mp4 e poste aqui.

Isto vai facilitar muito ajudá-lo.

[],s

Bem gente! Pergunta de aspirante a aspirante: Meu ubuntu não reconhece nenhum pendrive espetado nem mp4. Não dá o menor sinal.
Alguém pode me orientar passo-a-passo.

Grato