Como usar modem speedstream 4200 na porta usb?

[rafaelskater]

Ola galera eu queria saber como eu faço pra usar o modem speedstream 4200 com a porta usb,pois a porta ethernet está queimada!já vi outros artigos por ae mas entrendo muito bem pois sou iniciante no linux,disseram que eu tinha que eu tinha que transformar o firmware do meu modem em arquivo ''.bin'' mas quando faço o download do firmware vem ''exe'' e agora o que eu faço?
queeria uma explicação passo a passo se não for pedir demais

[Tota]

Movido para café com Ubuntu

[Ioca100]

Aqui eu tenho esse modem SS4200 e está roteado, uso normalmente a interface usb(tem que ligar o cabo usb no modem e no pc).Para rotear veja no site :  http://www.abusar.org.br/manuais/c_effic_4200.html

[rafaelskater]

amigo o problema é reconhecimento de hardware e não roteamento!!

[Ioca100]

amigo o problema é reconhecimento de hardware e não roteamento!!

Veja se consegue configurar pelo terminal:  sudo pppoeconf  
Pode ser driver que o Ubuntu não tem, pois usei Usb para Windows e tive que instalar o driver para ele funcionar.
Desconsidere a sugestão para rotear.
Acho que uma placa de rede nova deve ser adquirida.

[Tota]

amigo o problema é reconhecimento de hardware e não roteamento!!

Hummm, então não é preciso alterar o firmaware do aparelho, não.

Poste aqui qual a versão do seu Ubuntu.

Comecte o router na Usb.

entre em terminal e digite

Código: [Selecionar]

sudo lsusb
Verifique se o seu router foi reconhecido.

Se não foi poste aqui.

Se foi, ainda no terminal digite

Código: [Selecionar]

sudo ifconfig

Verifique como foi reconhecido ( eth0, eth1, usb1, etc, etc )


Se não foi poste aqui.

Se foi, ainda no terminal digite

Código: [Selecionar]

sudo dmesg
Só para ver se foi tudo configurado. ( olhe com paciência pois o resultado é bem grande )

Se seu Ubuntu é 9.04 ou 9.10 clique com o direito no icone de rede

Selecione a aba editar conexões, verifique se ele já não está lá.

Volte aqui com os resultados.

[],s

[rafaelskater]

ubuntu@ubuntu:~$ sudo lsusb
Bus 001 Device 002: ID 10d6:1101 Actions Semiconductor Co., Ltd D-Wave 2GB MP4 Player
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Bus 005 Device 002: ID 067c:e240 Efficient Networks, Inc. Speedstream Ethernet Adapter E240

Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

ubuntu@ubuntu:~$



ubuntu@ubuntu:~$ sudo ifconfig

eth0      Link encap:Ethernet  Endereço de HW 00:1a:4d:a4:0a:07  

          UP BROADCAST MULTICAST  MTU:1500  Métrica:1

          pacotes RX:0 erros:0 descartados:0 excesso:0 quadro:0

          Pacotes TX:0 erros:0 descartados:0 excesso:0 portadora:0

          colisões:0 txqueuelen:1000

          RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

          IRQ:23 Endereço de E/S:0xc000



lo        Link encap:Loopback Local  

          inet end.: 127.0.0.1  Masc:255.0.0.0

          endereço inet6: ::1/128 Escopo:Máquina

          UP LOOPBACK RUNNING  MTU:16436  Métrica:1

          pacotes RX:0 erros:0 descartados:0 excesso:0 quadro:0

          Pacotes TX:0 erros:0 descartados:0 excesso:0 portadora:0

          colisões:0 txqueuelen:0

          RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

[rafaelskater]

e o dsmeg

[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)

[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)

[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)

[    0.000000]  BIOS-e820: 0000000000100000 - 000000003bff0000 (usable)

[    0.000000]  BIOS-e820: 000000003bff0000 - 000000003bff3000 (ACPI NVS)

[    0.000000]  BIOS-e820: 000000003bff3000 - 000000003c000000 (ACPI data)

[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)

[    0.000000] DMI 2.3 present.

[    0.000000] last_pfn = 0x3bff0 max_arch_pfn = 0x100000

[    0.000000] Scanning 2 areas for low memory corruption

[    0.000000] modified physical RAM map:

[    0.000000]  modified: 0000000000000000 - 0000000000002000 (usable)

[    0.000000]  modified: 0000000000002000 - 0000000000006000 (reserved)

[    0.000000]  modified: 0000000000006000 - 0000000000007000 (usable)

[    0.000000]  modified: 0000000000007000 - 0000000000010000 (reserved)

[    0.000000]  modified: 0000000000010000 - 0000000000092800 (usable)

[    0.000000]  modified: 000000000009f800 - 00000000000a0000 (reserved)

[    0.000000]  modified: 00000000000f0000 - 0000000000100000 (reserved)

[    0.000000]  modified: 0000000000100000 - 000000003bff0000 (usable)

[    0.000000]  modified: 000000003bff0000 - 000000003bff3000 (ACPI NVS)

[    0.000000]  modified: 000000003bff3000 - 000000003c000000 (ACPI data)

[    0.000000]  modified: 00000000fec00000 - 0000000100000000 (reserved)

[    0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000

[    0.000000] RAMDISK: 3b85c000 - 3bfbf993

[    0.000000] Allocated new RAMDISK: 00881000 - 00fe4993

[    0.000000] Move RAMDISK from 000000003b85c000 - 000000003bfbf992 to 00881000 - 00fe4992

[    0.000000] ACPI: RSDP 000F67F0, 0014 (r0 P4M80P)

[    0.000000] ACPI: RSDT 3BFF3040, 002C (r1 P4M80P GBTUACPI 42302E31 GBTU  1010101)

[    0.000000] ACPI: FACP 3BFF30C0, 0074 (r1 P4M80P GBTUACPI 42302E31 GBTU  1010101)

[    0.000000] ACPI: DSDT 3BFF3180, 46DE (r1 P4M80P GBTUACPI     1000 MSFT  100000C)

[    0.000000] ACPI: FACS 3BFF0000, 0040

[    0.000000] ACPI: APIC 3BFF78C0, 0084 (r1 P4M80P GBTUACPI 42302E31 GBTU  1010101)

[    0.000000] ACPI: Local APIC address 0xfee00000

[    0.000000] 75MB HIGHMEM available.

[    0.000000] 883MB LOWMEM available.

[    0.000000]   mapped low ram: 0 - 373fe000

[    0.000000]   low ram: 00000000 - 373fe000

[    0.000000]   bootmap 00012000 - 00018e80

[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]

[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]

[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]

[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]

[    0.000000]   #3 [0000100000 - 000087c52c]    TEXT DATA BSS ==> [0000100000 - 000087c52c]

[    0.000000]   #4 [000087d000 - 0000881000]    INIT_PG_TABLE ==> [000087d000 - 0000881000]

[    0.000000]   #5 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]

[    0.000000]   #6 [0000010000 - 0000012000]          PGTABLE ==> [0000010000 - 0000012000]

[    0.000000]   #7 [0000881000 - 0000fe4993]      NEW RAMDISK ==> [0000881000 - 0000fe4993]

[    0.000000]   #8 [0000012000 - 0000019000]          BOOTMAP ==> [0000012000 - 0000019000]

[    0.000000] found SMP MP-table at [c00f4e60] 000f4e60

[    0.000000] Zone PFN ranges:

[    0.000000]   DMA      0x00000000 -> 0x00001000

[    0.000000]   Normal   0x00001000 -> 0x000373fe

[    0.000000]   HighMem  0x000373fe -> 0x0003bff0

[    0.000000] Movable zone start PFN for each node

[    0.000000] early_node_map[4] active PFN ranges

[    0.000000]     0: 0x00000000 -> 0x00000002

[    0.000000]     0: 0x00000006 -> 0x00000007

[    0.000000]     0: 0x00000010 -> 0x00000092

[    0.000000]     0: 0x00000100 -> 0x0003bff0

[    0.000000] On node 0 totalpages: 245621

[    0.000000] free_area_init_node: node 0, pgdat c06d0f80, node_mem_map c1000000

[    0.000000]   DMA zone: 32 pages used for memmap

[    0.000000]   DMA zone: 0 pages reserved

[    0.000000]   DMA zone: 3941 pages, LIFO batch:0

[    0.000000]   Normal zone: 1736 pages used for memmap

[    0.000000]   Normal zone: 220470 pages, LIFO batch:31

[    0.000000]   HighMem zone: 152 pages used for memmap

[    0.000000]   HighMem zone: 19290 pages, LIFO batch:3

[    0.000000]   Movable zone: 0 pages used for memmap

[    0.000000] ACPI: PM-Timer IO Port: 0x4008

[    0.000000] ACPI: Local APIC address 0xfee00000

[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)

[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)

[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)

[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)

[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])

[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])

[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])

[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])

[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])

[    0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23

[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)

[    0.000000] ACPI: IRQ0 used by override.

[    0.000000] ACPI: IRQ2 used by override.

[    0.000000] ACPI: IRQ9 used by override.

[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs

[    0.000000] Using ACPI (MADT) for SMP configuration information

[    0.000000] SMP: Allowing 4 CPUs, 3 hotplug CPUs

[    0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000

[    0.000000] PM: Registered nosave memory: 0000000000007000 - 0000000000010000

[    0.000000] PM: Registered nosave memory: 0000000000092000 - 00000000000a0000

[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000

[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000

[    0.000000] Allocating PCI resources starting at 40000000 (gap: 3c000000:c2c00000)

[    0.000000] PERCPU: Allocating 45056 bytes of per cpu data

[    0.000000] NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1

[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 243701

[    0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash -- locale=pt_BR console-setup/layoutcode?=br console-setup/modelcode?=abnt2

[    0.000000] Enabling fast FPU save and restore... done.

[    0.000000] Enabling unmasked SIMD FPU exception support... done.

[    0.000000] Initializing CPU#0

[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)

[    0.000000] Fast TSC calibration using PIT

[    0.000000] Detected 2799.972 MHz processor.

[    0.004000] Console: colour VGA+ 80x25

[    0.004000] console [tty0] enabled

[    0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)

[    0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)

[    0.004000] allocated 4914880 bytes of page_cgroup

[    0.004000] please try cgroup_disable=memory option if you don't want

[    0.004000] Scanning for low memory corruption every 60 seconds

[    0.004000] Memory: 953436k/982976k available (4126k kernel code, 28756k reserved, 2208k data, 532k init, 77768k highmem)

[    0.004000] virtual kernel memory layout:

[    0.004000]     fixmap  : 0xffc77000 - 0xfffff000   (3616 kB)

[    0.004000]     pkmap   : 0xff400000 - 0xff800000   (4096 kB)

[    0.004000]     vmalloc : 0xf7bfe000 - 0xff3fe000   ( 120 MB)

[    0.004000]     lowmem  : 0xc0000000 - 0xf73fe000   ( 883 MB)

[    0.004000]       .init : 0xc0737000 - 0xc07bc000   ( 532 kB)

[    0.004000]       .data : 0xc0507a6f - 0xc072fe60   (2208 kB)

[    0.004000]       .text : 0xc0100000 - 0xc0507a6f   (4126 kB)

[    0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.

[    0.004000] SLUB: Genslabs=12, HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1

[    0.004019] Calibrating delay loop (skipped), value calculated using timer frequency.. 5599.94 BogoMIPS (lpj=11199888)

[    0.004046] Security Framework initialized

[    0.004057] SELinux:  Disabled at boot.

[    0.004085] AppArmor: AppArmor initialized

[    0.004102] Mount-cache hash table entries: 512

[    0.004315] Initializing cgroup subsys ns

[    0.004323] Initializing cgroup subsys cpuacct

[    0.004327] Initializing cgroup subsys memory

[    0.004333] Initializing cgroup subsys freezer

[    0.004360] CPU: Trace cache: 12K uops, L1 D cache: 16K

[    0.004365] CPU: L2 cache: 256K

[    0.004369] CPU: Hyper-Threading is disabled

[    0.004374] using mwait in idle threads.

[    0.004394] Checking 'hlt' instruction... OK.

[    0.021047] SMP alternatives: switching to UP code

[    0.156036] ACPI: Core revision 20080926

[    0.163041] ACPI: Checking initramfs for custom DSDT

[    0.483927] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1

[    0.523632] CPU0: Intel(R) Celeron(R) CPU 2.80GHz stepping 09

[    0.524002] Brought up 1 CPUs

[    0.524002] Total of 1 processors activated (5599.94 BogoMIPS).

[    0.524002] CPU0 attaching NULL sched-domain.

[    0.524002] net_namespace: 776 bytes

[    0.524002] Booting paravirtualized kernel on bare hardware

[    0.524002] Time: 10:51:56  Date: 12/07/09

[    0.524002] regulator: core version 0.5

[    0.524002] NET: Registered protocol family 16

[    0.524002] EISA bus registered

[    0.524002] ACPI: bus type pci registered

[    0.530608] PCI: PCI BIOS revision 2.10 entry at 0xface0, last bus=1

[    0.530612] PCI: Using configuration type 1 for base access

[    0.532832] ACPI: EC: Look up EC in DSDT

[    0.541423] ACPI: Interpreter enabled

[    0.541432] ACPI: (supports S0 S1 S4 S5)

[    0.541461] ACPI: Using IOAPIC for interrupt routing

[    0.548522] ACPI: No dock devices found.

[    0.548551] ACPI: PCI Root Bridge [PCI0] (0000:00)

[    0.548634] pci 0000:00:00.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff]

[    0.548977] pci 0000:00:01.0: supports D1

[    0.549035] pci 0000:00:0f.0: reg 10 io port: [0x9000-0x9007]

[    0.549044] pci 0000:00:0f.0: reg 14 io port: [0x9400-0x9403]

[    0.549052] pci 0000:00:0f.0: reg 18 io port: [0x9800-0x9807]

[    0.549060] pci 0000:00:0f.0: reg 1c io port: [0x9c00-0x9c03]

[    0.549068] pci 0000:00:0f.0: reg 20 io port: [0xa000-0xa00f]

[    0.549076] pci 0000:00:0f.0: reg 24 io port: [0xa400-0xa4ff]

[    0.549154] pci 0000:00:0f.1: reg 20 io port: [0xa800-0xa80f]

[    0.549244] pci 0000:00:10.0: reg 20 io port: [0xac00-0xac1f]

[    0.549266] pci 0000:00:10.0: supports D1 D2

[    0.549269] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold

[    0.549274] pci 0000:00:10.0: PME# disabled

[    0.549333] pci 0000:00:10.1: reg 20 io port: [0xb000-0xb01f]

[    0.549354] pci 0000:00:10.1: supports D1 D2

[    0.549357] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold

[    0.549362] pci 0000:00:10.1: PME# disabled

[    0.549420] pci 0000:00:10.2: reg 20 io port: [0xb400-0xb41f]

[    0.549442] pci 0000:00:10.2: supports D1 D2

[    0.549445] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold

[    0.549449] pci 0000:00:10.2: PME# disabled

[    0.549508] pci 0000:00:10.3: reg 20 io port: [0xb800-0xb81f]

[    0.549530] pci 0000:00:10.3: supports D1 D2

[    0.549532] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold

[    0.549537] pci 0000:00:10.3: PME# disabled

[    0.549574] pci 0000:00:10.4: reg 10 32bit mmio: [0xde000000-0xde0000ff]

[    0.549617] pci 0000:00:10.4: supports D1 D2

[    0.549620] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold

[    0.549625] pci 0000:00:10.4: PME# disabled

[    0.549703] HPET not enabled in BIOS. You might try hpet=force boot option

[    0.549757] pci 0000:00:11.5: reg 10 io port: [0xbc00-0xbcff]

[    0.549802] pci 0000:00:11.5: supports D1 D2

[    0.549843] pci 0000:00:12.0: reg 10 io port: [0xc000-0xc0ff]

[    0.549852] pci 0000:00:12.0: reg 14 32bit mmio: [0xde001000-0xde0010ff]

[    0.549890] pci 0000:00:12.0: supports D1 D2

[    0.549892] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold

[    0.549897] pci 0000:00:12.0: PME# disabled

[    0.549962] pci 0000:01:00.0: reg 10 32bit mmio: [0xd8000000-0xdbffffff]

[    0.549969] pci 0000:01:00.0: reg 14 32bit mmio: [0xdc000000-0xdcffffff]

[    0.549994] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x00ffff]

[    0.550003] pci 0000:01:00.0: supports D1 D2

[    0.550053] pci 0000:00:01.0: bridge 32bit mmio: [0xdc000000-0xddffffff]

[    0.550059] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd8000000-0xdbffffff]

[    0.550069] bus 00 -> node 0

[    0.550082] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]

[    0.590157] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)

[    0.590429] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 12) *5

[    0.590699] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12)

[    0.590934] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.

[    0.591170] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.

[    0.591397] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.

[    0.591624] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.

[    0.591848] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.

[    0.592204] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0

[    0.592539] ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0

[    0.592907] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0

[    0.593249] ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0, disabled.

[    0.593478] ACPI: WMI: Mapper loaded

[    0.593797] SCSI subsystem initialized

[    0.593871] libata version 3.00 loaded.

[    0.593952] usbcore: registered new interface driver usbfs

[    0.593983] usbcore: registered new interface driver hub

[    0.594035] usbcore: registered new device driver usb

[    0.594241] PCI: Using ACPI for IRQ routing

[    0.594395] Bluetooth: Core ver 2.13

[    0.594395] NET: Registered protocol family 31

[    0.594395] Bluetooth: HCI device and connection manager initialized

[    0.594395] Bluetooth: HCI socket layer initialized

[    0.594395] NET: Registered protocol family 8

[    0.594395] NET: Registered protocol family 20

[    0.594395] NetLabel: Initializing

[    0.594395] NetLabel:  domain hash size = 128

[    0.594395] NetLabel:  protocols = UNLABELED CIPSOv4

[    0.594395] NetLabel:  unlabeled traffic allowed by default

[    0.594395] AppArmor: AppArmor Filesystem Enabled

[    0.594395] pnp: PnP ACPI init

[    0.594395] ACPI: bus type pnp registered

[    0.600129] pnp: PnP ACPI: found 14 devices

[    0.600134] ACPI: ACPI bus type pnp unregistered

[    0.600140] PnPBIOS: Disabled by ACPI PNP

[    0.600161] system 00:00: iomem range 0xf0000-0xf3fff could not be reserved

[    0.600165] system 00:00: iomem range 0xf4000-0xf7fff could not be reserved

[    0.600168] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved

[    0.600171] system 00:00: iomem range 0xfc000-0xfffff could not be reserved

[    0.600174] system 00:00: iomem range 0x3bff0000-0x3bffffff could not be reserved

[    0.600178] system 00:00: iomem range 0xffff0000-0xffffffff has been reserved

[    0.600181] system 00:00: iomem range 0x0-0x9ffff could not be reserved

[    0.600184] system 00:00: iomem range 0x100000-0x3bfeffff could not be reserved

[    0.600187] system 00:00: iomem range 0xfec00000-0xfec00fff has been reserved

[rafaelskater]

[    0.600190] system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved

[    0.600193] system 00:00: iomem range 0xfff80000-0xfffeffff has been reserved

[    0.600204] system 00:02: ioport range 0x4000-0x407f has been reserved

[    0.600208] system 00:02: ioport range 0x500-0x50f has been reserved

[    0.600225] system 00:03: ioport range 0x4d0-0x4d1 has been reserved

[    0.600228] system 00:03: ioport range 0x290-0x294 has been reserved

[    0.600231] system 00:03: ioport range 0x294-0x297 could not be reserved

[    0.600234] system 00:03: ioport range 0x880-0x88f has been reserved

[    0.635020] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01

[    0.635024] pci 0000:00:01.0:   IO window: disabled

[    0.635030] pci 0000:00:01.0:   MEM window: 0xdc000000-0xddffffff

[    0.635036] pci 0000:00:01.0:   PREFETCH window: 0x000000d8000000-0x000000dbffffff

[    0.635055] pci 0000:00:01.0: setting latency timer to 64

[    0.635060] bus: 00 index 0 io port: [0x00-0xffff]

[    0.635062] bus: 00 index 1 mmio: [0x000000-0xffffffff]

[    0.635065] bus: 01 index 0 mmio: [0x0-0x0]

[    0.635067] bus: 01 index 1 mmio: [0xdc000000-0xddffffff]

[    0.635070] bus: 01 index 2 mmio: [0xd8000000-0xdbffffff]

[    0.635072] bus: 01 index 3 mmio: [0x0-0x0]

[    0.635086] NET: Registered protocol family 2

[    0.635282] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)

[    0.635721] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)

[    0.637030] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)

[    0.637723] TCP: Hash tables configured (established 131072 bind 65536)

[    0.637729] TCP reno registered

[    0.637967] NET: Registered protocol family 1

[    0.638145] checking if image is initramfs... it is

[    1.136072] Switched to high resolution mode on CPU 0

[    1.303864] Freeing initrd memory: 7566k freed

[    1.304045] cpufreq: No nForce2 chipset.

[    1.304257] audit: initializing netlink socket (disabled)

[    1.304283] type=2000 audit(1260183117.304:1): initialized

[    1.313077] highmem bounce pool size: 64 pages

[    1.313085] HugeTLB registered 4 MB page size, pre-allocated 0 pages

[    1.314529] VFS: Disk quotas dquot_6.5.1

[    1.314635] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

[    1.315489] fuse init (API version 7.10)

[    1.315633] msgmni has been set to 1725

[    1.315943] alg: No test for stdrng (krng)

[    1.315971] io scheduler noop registered

[    1.315974] io scheduler anticipatory registered

[    1.315977] io scheduler deadline registered

[    1.316051] io scheduler cfq registered (default)

[    1.316073] PCI: VIA PCI bridge detected.Disabling DAC.

[    1.316167] pci 0000:00:11.0: Bypassing VIA 8237 APIC De-Assert Message

[    1.316178] pci 0000:01:00.0: Boot video device

[    1.320891] pci_hotplug: PCI Hot Plug PCI Core version: 0.5

[    1.320905] pciehp: PCI Express Hot Plug Controller Driver version: 0.4

[    1.321096] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0

[    1.321101] ACPI: Power Button (FF) [PWRF]

[    1.321162] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1

[    1.321166] ACPI: Power Button (CM) [PWRB]

[    1.321597] processor ACPI_CPU:00: registered as cooling_device0

[    1.324534] isapnp: Scanning for PnP cards...

[    1.676218] isapnp: No Plug & Play device found

[    1.678118] Serial: 8250/16550 driver4 ports, IRQ sharing enabled

[    1.678246] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

[    1.678369] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A

[    1.678824] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

[    1.679000] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A

[    1.680145] brd: module loaded

[    1.680629] loop: module loaded

[    1.680801] Fixed MDIO Bus: probed

[    1.680809] PPP generic driver version 2.4.2

[    1.680906] input: Macintosh mouse button emulation as /devices/virtual/input/input2

[    1.680964] Driver 'sd' needs updating - please use bus_type methods

[    1.680978] Driver 'sr' needs updating - please use bus_type methods

[    1.681156] sata_via 0000:00:0f.0: version 2.4

[    1.681639] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20

[    1.681643] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20

[    1.681656] sata_via 0000:00:0f.0: PCI INT B -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20

[    1.681707] sata_via 0000:00:0f.0: routed to hard irq line 11

[    1.681868] scsi0 : sata_via

[    1.682036] scsi1 : sata_via

[    1.682105] ata1: SATA max UDMA/133 cmd 0x9000 ctl 0x9400 bmdma 0xa000 irq 20

[    1.682109] ata2: SATA max UDMA/133 cmd 0x9800 ctl 0x9c00 bmdma 0xa008 irq 20

[    1.884037] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)

[    2.096023] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)

[    2.268206] ata2.00: HPA unlocked: 156299375 -> 156301488, native 156301488

[    2.268213] ata2.00: ATA-7: SAMSUNG HD080HJ, ZH100-47, max UDMA7

[    2.268216] ata2.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)

[    2.300358] ata2.00: configured for UDMA/133

[    2.300542] scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD080HJ  ZH10 PQ: 0 ANSI: 5

[    2.300743] sd 1:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)

[    2.300772] sd 1:0:0:0: [sda] Write Protect is off

[    2.300776] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00

[    2.300816] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[    2.300945] sd 1:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)

[    2.300973] sd 1:0:0:0: [sda] Write Protect is off

[    2.300976] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00

[    2.301015] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[    2.301022]  sda: sda1 sda2 < sda5 >

[    2.318347] sd 1:0:0:0: [sda] Attached SCSI disk

[    2.318442] sd 1:0:0:0: Attached scsi generic sg0 type 0

[    2.318969] pata_via 0000:00:0f.1: version 0.3.3

[    2.318997] pata_via 0000:00:0f.1: PCI INT A -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20

[    2.319241] scsi2 : pata_via

[    2.319355] scsi3 : pata_via

[    2.321420] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xa800 irq 14

[    2.321425] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xa808 irq 15

[    2.492386] ata3.01: ATAPI: TSSTcorpCD/DVDW SH-S182F, SB02, max UDMA/33

[    2.508276] ata3.01: configured for UDMA/33

[    2.677423] scsi 2:0:1:0: CD-ROM            TSSTcorp CD/DVDW SH-S182F SB02 PQ: 0 ANSI: 5

[    2.681136] sr0: scsi3-mmc drive: 32x/40x writer dvd-ram cd/rw xa/form2 cdda tray

[    2.681143] Uniform CD-ROM driver Revision: 3.20

[    2.681318] sr 2:0:1:0: Attached scsi CD-ROM sr0

[    2.681400] sr 2:0:1:0: Attached scsi generic sg1 type 5

[    2.681636] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[    2.682132] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21

[    2.682137] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21

[    2.682149] ehci_hcd 0000:00:10.4: PCI INT C -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21

[    2.682186] ehci_hcd 0000:00:10.4: EHCI Host Controller

[    2.682323] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1

[    2.682407] ehci_hcd 0000:00:10.4: irq 21, io mem 0xde000000

[    2.692025] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00

[    2.692160] usb usb1: configuration #1 chosen from 1 choice

[    2.692201] hub 1-0:1.0: USB hub found

[    2.692216] hub 1-0:1.0: 8 ports detected

[    2.692395] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

[    2.692434] uhci_hcd: USB Universal Host Controller Interface driver

[    2.692514] uhci_hcd 0000:00:10.0: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21

[    2.692527] uhci_hcd 0000:00:10.0: UHCI Host Controller

[    2.692622] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2

[    2.692651] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000ac00

[    2.692775] usb usb2: configuration #1 chosen from 1 choice

[    2.692813] hub 2-0:1.0: USB hub found

[    2.692827] hub 2-0:1.0: 2 ports detected

[    2.692967] uhci_hcd 0000:00:10.1: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21

[    2.692983] uhci_hcd 0000:00:10.1: UHCI Host Controller

[    2.693056] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3

[    2.693084] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000b000

[    2.693195] usb usb3: configuration #1 chosen from 1 choice

[    2.693242] hub 3-0:1.0: USB hub found

[    2.693268] hub 3-0:1.0: 2 ports detected

[    2.693405] uhci_hcd 0000:00:10.2: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21

[    2.693417] uhci_hcd 0000:00:10.2: UHCI Host Controller

[    2.693502] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4

[    2.693530] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000b400

[    2.693645] usb usb4: configuration #1 chosen from 1 choice

[    2.693681] hub 4-0:1.0: USB hub found

[    2.693693] hub 4-0:1.0: 2 ports detected

[    2.693841] uhci_hcd 0000:00:10.3: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21

[    2.693858] uhci_hcd 0000:00:10.3: UHCI Host Controller

[    2.693936] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5

[    2.693965] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000b800

[    2.694078] usb usb5: configuration #1 chosen from 1 choice

[    2.694116] hub 5-0:1.0: USB hub found

[    2.694128] hub 5-0:1.0: 2 ports detected

[    2.694330] usbcore: registered new interface driver libusual

[    2.694382] usbcore: registered new interface driver usbserial

[    2.694397] USB Serial support registered for generic

[    2.694417] usbcore: registered new interface driver usbserial_generic

[    2.694420] usbserial: USB Serial Driver core

[    2.694502] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12

[    2.694960] serio: i8042 KBD port at 0x60,0x64 irq 1

[    2.694972] serio: i8042 AUX port at 0x60,0x64 irq 12

[    2.695193] mice: PS/2 mouse device common for all mice

[    2.695421] rtc_cmos 00:05: RTC can wake from S4

[    2.695485] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0

[    2.695543] rtc0: alarms up to one year, y3k, 242 bytes nvram

[    2.695657] device-mapper: uevent: version 1.0.3

[    2.695884] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com

[    2.695979] device-mapper: multipath: version 1.0.5 loaded

[    2.695984] device-mapper: multipath round-robin: version 1.0.0 loaded

[    2.696175] EISA: Probing bus 0 at eisa.0

[    2.696200] Cannot allocate resource for EISA slot 4

[    2.696218] EISA: Detected 0 cards.

[    2.696279] cpuidle: using governor ladder

[    2.696283] cpuidle: using governor menu

[    2.696955] TCP cubic registered

[    2.697073] NET: Registered protocol family 10

[    2.697597] lo: Disabled Privacy Extensions

[    2.698004] NET: Registered protocol family 17

[    2.698052] Bluetooth: L2CAP ver 2.11

[    2.698055] Bluetooth: L2CAP socket layer initialized

[    2.698059] Bluetooth: SCO (Voice Link) ver 0.6

[    2.698061] Bluetooth: SCO socket layer initialized

[    2.698132] Bluetooth: RFCOMM socket layer initialized

[    2.698146] Bluetooth: RFCOMM TTY layer initialized

[    2.698148] Bluetooth: RFCOMM ver 1.10

[    2.698244] Using IPI No-Shortcut mode

[    2.698407] registered taskstats version 1

[    2.698553]   Magic number: 5:959:880

[    2.698680] rtc_cmos 00:05: setting system clock to 2009-12-07 10:51:59 UTC (1260183119)

[    2.698685] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found

[    2.698687] EDD information not available.

[    2.699425] Freeing unused kernel memory: 532k freed

[    2.699571] Write protecting the kernel text: 4128k

[    2.699614] Write protecting the kernel read-only data: 1532k

[    2.739783] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3

[    3.004041] usb 1-2: new high speed USB device using ehci_hcd and address 2

[    3.141426] usb 1-2: configuration #1 chosen from 1 choice

[    3.157979] Initializing USB Mass Storage driver...

[    3.193622] Floppy drive(s): fd0 is 1.44M

[    3.194629] scsi4 : SCSI emulation for USB Mass Storage devices

[    3.202392] usbcore: registered new interface driver usb-storage

[    3.202401] USB Mass Storage support registered.

[    3.202561] usb-storage: device found at 2

[    3.202565] usb-storage: waiting for device to settle before scanning

[    3.212040] FDC 0 is a post-1991 82077

[    3.412744] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker

[    3.413611] ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 23

[    3.413617] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23

[    3.413630] via-rhine 0000:00:12.0: PCI INT A -> Link[ALKD] -> GSI 23 (level, low) -> IRQ 23

[    3.414590] eth0: VIA Rhine II at 0xde001000, 00:1a:4d:a4:0a:07, IRQ 23.

[    3.415302] eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.

[    3.616147] usb 5-1: new full speed USB device using uhci_hcd and address 2

[    4.508417] usb 5-1: configuration #1 chosen from 1 choice

[    7.805623] ISO 9660 Extensions: Microsoft Joliet Level 3

[    7.870615] ISO 9660 Extensions: RRIP_1991A

[    8.132325] aufs 20080922

[    8.200238] usb-storage: device scan complete

[    8.200838] scsi scan: INQUIRY result too short (5), using 36

[    8.200847] scsi 4:0:0:0: Direct-Access     GENERIC  USB DISK DEVICE  1.00 PQ: 0 ANSI: 0 CCS

[    8.286336] sd 4:0:0:0: [sdb] 3986353 512-byte hardware sectors: (2.04 GB/1.90 GiB)

[    8.286824] sd 4:0:0:0: [sdb] Write Protect is off

[    8.286829] sd 4:0:0:0: [sdb] Mode Sense: 00 c0 00 00

[    8.286832] sd 4:0:0:0: [sdb] Assuming drive cache: write through

[    8.288108] sd 4:0:0:0: [sdb] 3986353 512-byte hardware sectors: (2.04 GB/1.90 GiB)

[    8.288615] sd 4:0:0:0: [sdb] Write Protect is off

[    8.288621] sd 4:0:0:0: [sdb] Mode Sense: 00 c0 00 00

[    8.288624] sd 4:0:0:0: [sdb] Assuming drive cache: write through

[    8.288634]  sdb: sdb1

[    8.290334] sd 4:0:0:0: [sdb] Attached SCSI removable disk

[    8.290447] sd 4:0:0:0: Attached scsi generic sg2 type 0

[    8.371932] squashfs: version 3.3 (2007/10/31) Phillip Lougher

[   71.960552] udev: starting version 141

[   72.225640] parport_pc 00:0b: reported by Plug and Play ACPI

[   72.225702] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]

[   72.392208] Linux agpgart interface v0.103

[   72.728726] agpgart: Detected VIA VT3314 chipset

[   72.740409] agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xd0000000

[   72.802461] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

[   74.198919] ppdev: user-space parallel port driver

[   74.260798] input: PC Speaker as /devices/platform/pcspkr/input/input4

[   74.468431] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume

[   74.865816] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22

[   74.865822] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22

[   74.865836] VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[ALKC] -> GSI 22 (level, low) -> IRQ 22

[   74.866010] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64

[   74.956027] psmouse serio1: ID: 10 00 64<6>input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5

[   87.556512] Bluetooth: BNEP (Ethernet Emulation) ver 1.3

[   87.556517] Bluetooth: BNEP filters: protocol multicast

[   87.705857] Bridge firewalling registered

[   93.249068] [drm] Initialized drm 1.1.0 20060810

[   93.524870] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[   93.525133] [drm] Initialized via 2.11.1 20070202 on minor 0

[   93.633669] agpgart-via 0000:00:00.0: AGP 3.5 bridge

[   93.633704] agpgart-via 0000:00:00.0: putting AGP V3 device into 8x mode

[   93.633790] pci 0000:01:00.0: putting AGP V3 device into 8x mode

[   94.155666] lp0: using parport0 (interrupt-driven).

[   96.201482] eth0: link down

[   96.201684] ADDRCONF(NETDEV_UP): eth0: link is not ready

ubuntu@ubuntu:~$

[Ioca100]

nada até agora???

Como disse acima, também tenho esse modem , corri a internet  e  vi  que não existe driver para fazer funcionar o USB no Linux, o negócio é comprar uma placa de rede,caso o modem esteja 100%, não é caro.
Boa sorte!

[rafaelskater]

amigo,coloquei no começo do topico que aporta ethernet esta queimada(não da minha placa de rede mas sim do meu modem)
tem varias pessoas que navegam com speed touch,então pq não roda com o speed stream??

[Tota]

amigo,coloquei no começo do topico que aporta ethernet esta queimada(não da minha placa de rede mas sim do meu modem)
tem varias pessoas que navegam com speed touch,então pq não roda com o speed stream??
[/quote

Você já verificou no manual do modem como habilitar a USB?

[Ioca100]

amigo,coloquei no começo do topico que aporta ethernet esta queimada(não da minha placa de rede mas sim do meu modem)
tem varias pessoas que navegam com speed touch,então pq não roda com o speed stream??

Desculpe-me de não ter reparado, a gente lê tanta coisa que esse detalhe passou, mas toda informação que obtive é que não existe driver para Linux, eu mesmo já usei o USB para navegar pelo Windows no notebook da minha filha, mas tive que baixar e instalar o driver que para Windows existe.

[Tota]

Desculpe-me de não ter reparado, a gente lê tanta coisa que esse detalhe passou, mas toda informação que obtive é que não existe driver para Linux, eu mesmo já usei o USB para navegar pelo Windows no notebook da minha filha, mas tive que baixar e instalar o driver que para Windows existe.

Parece que existe sim.

On Friday 2008 November 28 17:05, Tzafrir Cohen wrote:
> On Fri, Nov 28, 2008 at 04:48:58PM -0600, Boyd Stephen Smith Jr. wrote:
> > I'm trying to get this:
> > System Type:  SpeedStream 4200-Series
> > Config Part #:  003-6100-G0a
> > Firmware Part #:  004-D241-A0U
> > MAC Address:  00:18:D1:82:65:9E
> >
> > working via USB.
>
> What happens after you connect it to a Linux box?

bss@dellbuntu:~$ tail /var/log/kern.log; lsusb
Nov 28 15:44:49 dellbuntu kernel: b44: eth0: Link is down.
Nov 28 15:44:58 dellbuntu kernel: b44: eth0: Link is up at 100 Mbps, full
duplex.
Nov 28 15:44:58 dellbuntu kernel: b44: eth0: Flow control is off for TX and
off for RX.
Nov 28 15:46:04 dellbuntu kernel: b44: eth0: Link is down.
Nov 28 15:46:13 dellbuntu kernel: b44: eth0: Link is up at 100 Mbps, full
duplex.
Nov 28 15:46:13 dellbuntu kernel: b44: eth0: Flow control is off for TX and
off for RX.
Nov 28 15:52:19 dellbuntu kernel: b44: eth0: Link is down.
Nov 28 15:52:27 dellbuntu kernel: b44: eth0: Link is up at 100 Mbps, full
duplex.
Nov 28 15:52:27 dellbuntu kernel: b44: eth0: Flow control is off for TX and
off for RX.
Nov 28 17:17:13 dellbuntu kernel: Adding 4194296k swap on /dev/dellbuntu/swap. 
Priority:-1 extents:1 across:4194296k
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
bss@dellbuntu:~$ # Connect the device
bss@dellbuntu:~$ tail /var/log/kern.log; lsusb
Nov 28 15:46:13 dellbuntu kernel: b44: eth0: Link is up at 100 Mbps, full
duplex.
Nov 28 15:46:13 dellbuntu kernel: b44: eth0: Flow control is off for TX and
off for RX.
Nov 28 15:52:19 dellbuntu kernel: b44: eth0: Link is down.
Nov 28 15:52:27 dellbuntu kernel: b44: eth0: Link is up at 100 Mbps, full
duplex.
Nov 28 15:52:27 dellbuntu kernel: b44: eth0: Flow control is off for TX and
off for RX.
Nov 28 17:17:13 dellbuntu kernel: Adding 4194296k swap on /dev/dellbuntu/swap. 
Priority:-1 extents:1 across:4194296k
Nov 28 18:11:29 dellbuntu kernel: b44: eth0: Link is down.
Nov 28 18:11:41 dellbuntu kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
Nov 28 18:12:14 dellbuntu kernel: usb 4-1: new full speed USB device using
uhci_hcd and address 2
Nov 28 18:12:15 dellbuntu kernel: usb 4-1: configuration #1 chosen from 1
choice
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 002: ID 067c:e240 Efficient Networks, Inc.
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
bss@dellbuntu:~$ sudo modprobe rndis_host
bss@dellbuntu:~$ tail /var/log/kern.log; lsusb
Nov 28 15:52:19 dellbuntu kernel: b44: eth0: Link is down.
Nov 28 15:52:27 dellbuntu kernel: b44: eth0: Link is up at 100 Mbps, full
duplex.
Nov 28 15:52:27 dellbuntu kernel: b44: eth0: Flow control is off for TX and
off for RX.
Nov 28 17:17:13 dellbuntu kernel: Adding 4194296k swap on /dev/dellbuntu/swap. 
Priority:-1 extents:1 across:4194296k
Nov 28 18:11:29 dellbuntu kernel: b44: eth0: Link is down.
Nov 28 18:11:41 dellbuntu kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
Nov 28 18:12:14 dellbuntu kernel: usb 4-1: new full speed USB device using
uhci_hcd and address 2
Nov 28 18:12:15 dellbuntu kernel: usb 4-1: configuration #1 chosen from 1
choice
Nov 28 18:12:52 dellbuntu kernel: usbcore: registered new interface driver
cdc_ether
Nov 28 18:12:52 dellbuntu kernel: usbcore: registered new interface driver
rndis_host
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 002: ID 067c:e240 Efficient Networks, Inc.
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
bss@dellbuntu:~$
--

Resultado do lsusb de rafaelskater :

Bus 005 Device 002: ID 067c:e240 Efficient Networks, Inc. Speedstream Ethernet Adapter E240

Baixando o manual => http://download.gigaset.com/repository/1115/111583/SpeedStream_4200_4100.pdf

Pelo manual a porta não necessita configuração.

Isso é o que posso informar que obtive pela net.

[],s