[RESOLVIDO]Error grub 18 ao entrar no windows depois de adicionar um HD

[peters0n]

Boa tarde...
estou com um problema no meu grub depois que que instalei um HD de 40 GB
Quando eu ligo o HD ele não inicializa o windows e da mensagem de erro
(This is not a bootable disk...)
Grub Loading Please wait
error 18
Quando desligo o HD ele volta a fucionar normalmente

tentei editar o grub mais mesmo assim não consegui.

sudo fdisk -l

Disco /dev/sda: 82.3 GB, 82348277760 bytes
255 heads, 63 sectors/track, 10011 cylinders
Units = cilindros of 16065 * 512 = 8225280 bytes
Disk identifier: 0xd208d208

Dispositivo Boot Início Fim Blocos Id Sistema
/dev/sda1   *           1        2553    20506941   83  Linux
/dev/sda2            2554       10011    59906385    5  Estendida
/dev/sda5            2554        2808     2048256   82  Linux swap / Solaris
/dev/sda6            2809       10011    57858066   83  Linux

Disco /dev/sdb: 40.0 GB, 40060403712 bytes
255 heads, 63 sectors/track, 4870 cylinders
Units = cilindros of 16065 * 512 = 8225280 bytes
Disk identifier: 0x3510350f

Dispositivo Boot Início Fim Blocos Id Sistema
/dev/sdb1   *           1        4870    39118243+   c  W95 FAT32 (LBA)

Disco /dev/sdc: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cilindros of 16065 * 512 = 8225280 bytes
Disk identifier: 0xc31dc31d

Dispositivo Boot Início Fim Blocos Id Sistema
/dev/sdc1   *           1        5806    46636663+   7  HPFS ou NTFS
/dev/sdc2            5807       11613    46644727+   c  W95 FAT32 (LBA)
/dev/sdc3           11614       30401   150914610    c  W95 FAT32 (LBA)

menu.lst

# menu.lst - See: grub(, info grub, update-grub(
#            grub-install(, grub-floppy(,
#            grub-md5-crypt, /usr/share/doc/grub
#            and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default      0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout      10

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line)  and entries protected by the
# command 'lock'
# e.g. password topsecret
#      password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title      Windows 95/98/NT/2000
# root      (hd0,0)
# makeactive
# chainloader   +1
#
# title      Linux
# root      (hd0,1)
# kernel   /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
##      kopt_2_6_8=root=/dev/hdc1 ro
##      kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=11e74189-7b92-4c7a-bbcc-63c9220376f6 ro locale=pt_BR xforcevesa

## default grub root device
## e.g. groot=(hd0,0)
# groot=11e74189-7b92-4c7a-bbcc-63c9220376f6

## should update-grub create alternative automagic boot options
## e.g. alternative=true
##      alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
##      lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
##      lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
##      altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
##      howmany=7
# howmany=all

## should update-grub create memtest86 boot option
## e.g. memtest86=true
##      memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title      Ubuntu 8.10, kernel 2.6.27-11-generic
uuid      11e74189-7b92-4c7a-bbcc-63c9220376f6
kernel      /boot/vmlinuz-2.6.27-11-generic root=UUID=11e74189-7b92-4c7a-bbcc-63c9220376f6 ro locale=pt_BR xforcevesa quiet splash
initrd      /boot/initrd.img-2.6.27-11-generic
quiet

title      Ubuntu 8.10, kernel 2.6.27-11-generic (recovery mode)
uuid      11e74189-7b92-4c7a-bbcc-63c9220376f6
kernel      /boot/vmlinuz-2.6.27-11-generic root=UUID=11e74189-7b92-4c7a-bbcc-63c9220376f6 ro locale=pt_BR xforcevesa  single
initrd      /boot/initrd.img-2.6.27-11-generic

title      Ubuntu 8.10, kernel 2.6.27-7-generic
uuid      11e74189-7b92-4c7a-bbcc-63c9220376f6
kernel      /boot/vmlinuz-2.6.27-7-generic root=UUID=11e74189-7b92-4c7a-bbcc-63c9220376f6 ro locale=pt_BR xforcevesa quiet splash
initrd      /boot/initrd.img-2.6.27-7-generic
quiet

title      Ubuntu 8.10, kernel 2.6.27-7-generic (recovery mode)
uuid      11e74189-7b92-4c7a-bbcc-63c9220376f6
kernel      /boot/vmlinuz-2.6.27-7-generic root=UUID=11e74189-7b92-4c7a-bbcc-63c9220376f6 ro locale=pt_BR xforcevesa  single
initrd      /boot/initrd.img-2.6.27-7-generic

title      Ubuntu 8.10, memtest86+
uuid      11e74189-7b92-4c7a-bbcc-63c9220376f6
kernel      /boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.
title      Other operating systems:
root


# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sdb1
title      Microsoft Windows XP Professional
root      (hd1,0)
savedefault
makeactive
map      (hd0) (hd1)
map      (hd1) (hd0)
chainloader   +1

Aguardo respostass
Valeuuuu

[tonyl_jp]

Bom quando vc liga seu HD de 40G ele passa a ser reconhecido como sdb (hd1).
Ele está no lugar do seu HD de 250G que virou sdc (hd2).
Vc tem duas soluções aí, ou vc troca o jumper ou slot IDE do HD de 40G.
ou mude o menu.lst desta forma:
title Windows
root (hd2,0)
map (hd2) (hd0) <---está parte e para enganar o windows para ele achar que e o primeiro HD(sempre quer ser o primeiro heheh)
map (hd0) (hd2)
makeactive
chainloader +1

[peters0n]

Valeuu cara!
Deu tudo certinho.
eu so não sabia os esquema dos Map.
se vc souber de algum topic explicando me manda
Valeusss

Bom quando vc liga seu HD de 40G ele passa a ser reconhecido como sdb (hd1).
Ele está no lugar do seu HD de 250G que virou sdc (hd2).
Vc tem duas soluções aí, ou vc troca o jumper ou slot IDE do HD de 40G.
ou mude o menu.lst desta forma:
title Windows
root (hd2,0)
map (hd2) (hd0) <---está parte e para enganar o windows para ele achar que e o primeiro HD(sempre quer ser o primeiro heheh)
map (hd0) (hd2)
makeactive
chainloader +1