Olá a todos,
Estou com um problema na inicialização do sistema, fazendo com que acrescente cerca de 1 min a mais na inicialização devido a este problema.
Abaixo segue o trecho do kern.log onde mostra o erro:
Aug 16 21:27:51 t0in kernel: [ 3.712754] scsi0 : ahci
Aug 16 21:27:51 t0in kernel: [ 4.195660] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Aug 16 21:27:51 t0in kernel: [ 4.237574] ata1.00: ata_hpa_resize 1: sectors = 625142448, hpa_sectors = 625142448
Aug 16 21:27:51 t0in kernel: [ 4.237579] ata1.00: ATA-7: ST3320620AS, 3.AAE, max UDMA/133
Aug 16 21:27:51 t0in kernel: [ 4.237582] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
Aug 16 21:27:51 t0in kernel: [ 4.295744] ata1.00: ata_hpa_resize 1: sectors = 625142448, hpa_sectors = 625142448
Aug 16 21:27:51 t0in kernel: [ 4.295748] ata1.00: configured for UDMA/133
Aug 16 21:27:51 t0in kernel: [ 4.295753] scsi1 : ahci
Aug 16 21:27:51 t0in kernel: [ 4.779669] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Aug 16 21:27:51 t0in kernel: [ 34.714043] ata2.00: qc timeout (cmd 0xec)
Aug 16 21:27:51 t0in kernel: [ 34.714048] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x104)
Aug 16 21:27:51 t0in kernel: [ 42.693982] ata2: port is slow to respond, please be patient (Status 0x80)
Aug 16 21:27:51 t0in kernel: [ 65.683326] ata2: port failed to respond (30 secs, Status 0x80)
Aug 16 21:27:51 t0in kernel: [ 65.683361] ata2: COMRESET failed (device not ready)
Aug 16 21:27:51 t0in kernel: [ 65.683396] ata2: hardreset failed, retrying in 5 secs
Aug 16 21:27:51 t0in kernel: [ 71.545500] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Aug 16 21:27:51 t0in kernel: [ 71.545562] ata2.00: ATA-6: Config Disk, RGL10364, max UDMA/133
Aug 16 21:27:51 t0in kernel: [ 71.545565] ata2.00: 640 sectors, multi 1: LBA
Aug 16 21:27:51 t0in kernel: [ 71.545646] ata2.00: configured for UDMA/133
Aug 16 21:27:51 t0in kernel: [ 71.545652] scsi2 : ahci
Aug 16 21:27:51 t0in kernel: [ 71.855290] ata3: SATA link down (SStatus 0 SControl 300)
Aug 16 21:27:51 t0in kernel: [ 71.855298] scsi3 : ahci
Aug 16 21:27:51 t0in kernel: [ 72.169327] ata4: SATA link down (SStatus 0 SControl 300)
Configurações da máquina:
- E6600 Core 2 Duo
- ASUS P5WDH DELUXE
- HD SATA2 320G SEAGATE
HD está particionado em:
. /dev/sda1 = ntfs
. /dev/sda2 = extended
. . /dev/sda6 = linux-swap
. . /dev/sda7 = ext3
. . /dev/sda5 = ext3
---
Outro problema é em relação ao fsck: quando o sistema está inicializando ele passa do fsck no /dev/sda5 que tem 110GB, mas contem arquivos maiores que 2GB... como realizo o fsck manualmente?