Leitor 3 em 1 de cartões de memória

[Kalouro]

olá

Tenho um notebook Megaware ms-10342b com um leitor de memória 3 em 1 (SD/MS/MMC) e com o ubuntu 10.04 LTS.

Não consigo ler um cartão SD nele.

o linux aparentemente reconhece o leitor:
$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 3 (rev 02)
00:1d.0 USB Controller: Intel Corporation N10/ICH7 Family USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 02)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
03:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
04:04.0 CardBus bridge: O2 Micro, Inc. OZ711MP1/MS1 MemoryCardBus Controller (rev 21)
04:04.2 SD Host controller: O2 Micro, Inc. Integrated MMC/SD Controller (rev 01)
04:04.3 Bridge: O2 Micro, Inc. Integrated MS/xD Controller (rev 01)
04:04.4 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02)

Mas não aparece nada quando eu coloco o cartão... antes e depois a saída do comando não se altera:

$ls /dev |grep sd
sda
sda1
sda2
sda5

O que eu faço? Alguém me ajuda?

[Kalouro]

Umm

meio besta, mas descobri que meu cartão não é um SD... hehehe

É um Sonu Memory Stick Pro Duo.. Daí olhando o tail lspci -k....


04:04.0 CardBus bridge: O2 Micro, Inc. OZ711MP1/MS1 MemoryCardBus Controller (rev 21)
   Kernel driver in use: yenta_cardbus
   Kernel modules: yenta_socket
04:04.2 SD Host controller: O2 Micro, Inc. Integrated MMC/SD Controller (rev 01)
   Kernel driver in use: sdhci-pci
   Kernel modules: sdhci-pci
04:04.3 Bridge: O2 Micro, Inc. Integrated MS/xD Controller (rev 01)
04:04.4 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02)
   Kernel driver in use: ohci1394
   Kernel modules: firewire-ohci, ohci1394


o Integrated MS/xD Controller não tem driver no kernell associado.. e ao ver o tail do dmseg, nada acontece ao tirar e colocar o memory stick.


[ 4347.092514] atkbd.c: Unknown key released (translated set 2, code 0xf1 on isa0060/serio0).
[ 4347.092521] atkbd.c: Use 'setkeycodes e071 <keycode>' to make it known.
[ 6014.820073] usb 3-2: new full speed USB device using uhci_hcd and address 4
[ 6014.996086] usb 3-2: configuration #1 chosen from 1 choice
[ 6015.052081] cdc_acm 3-2:1.1: ttyACM0: USB ACM device
[ 6015.055419] usb 3-2: bad CDC descriptors
[ 6015.055544] usb 3-2: bad CDC descriptors
[ 6444.540156] usb 3-2: USB disconnect, address 4
[10115.320074] usb 3-2: new full speed USB device using uhci_hcd and address 5
[10115.497296] usb 3-2: configuration #1 chosen from 1 choice
[10115.553364] cdc_acm 3-2:1.1: ttyACM0: USB ACM device
[10115.556669] usb 3-2: bad CDC descriptors
[10115.562772] usb 3-2: bad CDC descriptors
[10209.290134] usb 3-2: USB disconnect, address 5


ps: Meu kernell é o 64 bits

[Danne]

Esse leitor não lê os cartões da sony (formato proprietário), tente com um cartão apropriado e faça o teste.