Olá, já tentei
muitos tutoriais, porém nenhum funcionou com o meu wi-fi especificamente, no windows consegui fazer ele funcionar normalmente, porém no ubuntu 14.10 nada, to com o kernel 3.16. Segue algumas infos.
lsusb
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 020: ID 148f:7601 Ralink Technology, Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 003: ID 045e:0750 Microsoft Corp. Wired Keyboard 600
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 1c4f:3002 SiGma Micro WebCam SiGma Micro
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 046d:c05a Logitech, Inc. M90/M100 Optical Mouse
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
lsusb -t
/: Bus 07.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/2p, 12M
/: Bus 06.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/3p, 12M
|__ Port 3: Dev 3, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 3: Dev 3, If 1, Class=Human Interface Device, Driver=usbhid, 1.5M
/: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/3p, 12M
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/3p, 12M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/3p, 12M
|__ Port 2: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/6p, 480M
|__ Port 3: Dev 20, If 0, Class=Vendor Specific Class, Driver=, 480M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/6p, 480M
|__ Port 1: Dev 4, If 0, Class=Video, Driver=uvcvideo, 480M
|__ Port 1: Dev 4, If 1, Class=Video, Driver=uvcvideo, 480M
sudo lshw -C network
*-network
description: Ethernet interface
product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:02:00.0
logical name: eth0
version: 02
serial: 00:25:11:71:94:d2
size: 10Mbit/s
capacity: 1Gbit/s
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10Mbit/s
resources: irq:43 ioport:c800(size=256) memory:feaff000-feafffff memory:fdff0000-fdffffff memory:feac0000-feadffff
neste último só a minha placa de cabo onboard aparece, a minha wi-fi usb nada, já estou há uns 5 dias caçando uma solução e nenhuma funfa, o driver que vem com ele num cd não compila.
Alguém me dá esse help plz...
Até mais.