Ja segui varios tutoriais e nao estou conseguindo fazer uma openvpn funcionar em um servidor ubuntu.

Na matriz o ip da internet é 189.111.245.xxx
ip interno 102.168.0.yyy

Na filial meu ip de navegacao muda constantemente e o interno é 192.168.0.zzz

O arquivo matriz.conf:
# Usar como interface o driver TUN
dev tun
# 10.0.0.1 IP que será assumido na matriz
# 10.0.0.2 IP remoto, ou seja, esse será o IP da filial
ifconfig 10.0.0.1 10.0.0.2
# Entra no diretório onde se encontram os arquivos de configuração
cd /etc/openvpn
# Indica que esse túnel possui uma chave de criptografia
secret chave
# OpenVPN usa a porta 5000/UDP por padrão.
# Cada túnel do OpenVPN deve usar
# uma porta diferente.
# O padrão é a porta 5000
port 5000
# Usuário que rodará o daemon do OpenVPN
user nobody
# Grupo que rodará o daemon do OpenVPN
group nobody
#Usa a biblioteca lzo
comp-lzo
# Envia um ping via UDP para a parte
# remota a cada 15 segundos para manter
# a conexão de pé em firewall statefull
# Muito recomendado, mesmo se você não usa
# um firewall baseado em statefull.
ping 15
# Nível de log
verb 3

o arquivo filial.conf:
# Usar como interface o driver TUN
dev tun
# 10.0.0.1 IP que será assumido na matriz
# 10.0.0.2 IP remoto, ou seja, esse será o IP da filial
ifconfig 10.0.0.2 10.0.0.1
# Indica onde está o IP da Matriz (essa é a única linha que acrescentamos
# no arquivo de configuração da filial), o resto é tudo igual.
remote 189.111.245.xxx
# Entra no diretório onde se encontram os arquivos de configuração
cd /etc/openvpn
# Indica que esse túnel possui uma chave de criptografia
secret chave
# OpenVPN usa a porta 5000/UDP por padrão.
# Cada túnel do OpenVPN deve usar
# uma porta diferente.
# O padrão é a porta 5000
port 5000
# Usuário que rodará o daemon do OpenVPN
user nobody
# Grupo que rodará o daemon do OpenVPN
group nobody
# Usa a biblioteca lzo
comp-lzo
# Envia um ping via UDP para a parte
# remota a cada 15 segundos para manter
# a conexão de pé em firewall statefull
# Muito recomendado, mesmo se você não usa
# um firewall baseado em statefull.
ping 15
# Nível de log
verb 3

o ifconfig apresenta a seguinte mensagem:
eth0      Link encap:Ethernet  Endereço de HW 00:24:1d:f1:b8:6d 
          inet end.: 192.168.0.yyy  Bcast:192.168.0.255  Masc:255.255.255.0
          endereço inet6: fe80::224:1dff:fef1:b86d/64 Escopo:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Métrica:1
          pacotes RX:21825709 erros:0 descartados:214 excesso:0 quadro:0
          Pacotes TX:45907992 erros:0 descartados:0 excesso:0 portadora:0
          colisões:0 txqueuelen:1000
          RX bytes:3429609731 (3.4 GB) TX bytes:63885312445 (63.8 GB)

eth1      Link encap:Ethernet  Endereço de HW 00:e0:4c:33:d9:30 
          UP BROADCAST MULTICAST  MTU:1500  Métrica:1
          pacotes RX:0 erros:0 descartados:0 excesso:0 quadro:0
          Pacotes TX:0 erros:0 descartados:0 excesso:0 portadora:0
          colisões:0 txqueuelen:1000
          RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

lo        Link encap:Loopback Local 
          inet end.: 127.0.0.1  Masc:255.0.0.0
          endereço inet6: ::1/128 Escopo:Máquina
          UP LOOPBACK RUNNING  MTU:65536  Métrica:1
          pacotes RX:257903 erros:0 descartados:0 excesso:0 quadro:0
          Pacotes TX:257903 erros:0 descartados:0 excesso:0 portadora:0
          colisões:0 txqueuelen:0
          RX bytes:222217414 (222.2 MB) TX bytes:222217414 (222.2 MB)

tun0      Link encap:Não Especificado  Endereço de HW 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 
          inet end.: 10.0.0.1  P-a-P:10.0.0.1  Masc:255.255.255.255
          UP POINTOPOINT NOARP MULTICAST  MTU:1500  Métrica:1
          pacotes RX:0 erros:0 descartados:0 excesso:0 quadro:0
          Pacotes TX:0 erros:0 descartados:0 excesso:0 portadora:0
          colisões:0 txqueuelen:100
          RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

O que pode estar errado ?

O gutsy eu consigo mas o 13.10 nao, segue meu X.org.log

[ 280.483]
X.Org X Server 1.14.3
Release Date: 2013-09-12
[ 280.483] X Protocol Version 11, Revision 0
[ 280.483] Build Operating System: Linux 3.2.0-37-generic i686 Ubuntu
[ 280.483] Current Operating System: Linux kubuntu 3.11.0-12-generic #19-Ubuntu SMP Wed Oct 9 16:12:00 UTC 2013 i686
[ 280.484] Kernel command line: file=/cdrom/preseed/kubuntu.seed boot=casper maybe-ubiquity initrd=/casper/initrd.lz quiet splash nouveau.modeset=0 -- locale=pt_BR keyboard-configuration/layoutcode?=br keyboard-configuration/modelcode?=abnt2
[ 280.484] Build Date: 15 October 2013 09:23:29AM
[ 280.484] xorg-server 2:1.14.3-3ubuntu2 (For technical support please see http://www.ubuntu.com/support)
[ 280.484] Current version of pixman: 0.30.2
[ 280.485] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 280.485] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 280.486] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Feb 18 13:40:55 2014
[ 280.487] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 280.488] (==) No Layout section. Using the first Screen section.
[ 280.488] (==) No screen section available. Using defaults.
[ 280.488] (**) |-->Screen "Default Screen Section" (0)
[ 280.488] (**) | |-->Monitor "<default monitor>"
[ 280.489] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 280.489] (==) Automatically adding devices
[ 280.489] (==) Automatically enabling devices
[ 280.489] (==) Automatically adding GPU devices
[ 280.489] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 280.489] Entry deleted from font path.
[ 280.489] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 280.489] Entry deleted from font path.
[ 280.489] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 280.489] Entry deleted from font path.
[ 280.489] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 280.489] Entry deleted from font path.
[ 280.489] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 280.489] Entry deleted from font path.
[ 280.489] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 280.489] (==) ModulePath set to "/usr/lib/i386-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 280.489] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 280.490] (II) Loader magic: 0xb77996a0
[ 280.490] (II) Module ABI versions:
[ 280.490] X.Org ANSI C Emulation: 0.4
[ 280.490] X.Org Video Driver: 14.1
[ 280.490] X.Org XInput driver : 19.1
[ 280.490] X.Org Server Extension : 7.0
[ 280.493] (--) PCI:*(0:1:0:0) 1106:3371:1019:2125 rev 1, Mem @ 0xf8000000/67108864, 0xfd000000/16777216, BIOS @ 0x??/65536
[ 280.494] (II) Open ACPI successful (/var/run/acpid.socket)
[ 280.494] Initializing built-in extension Generic Event Extension
[ 280.494] Initializing built-in extension SHAPE
[ 280.494] Initializing built-in extension MIT-SHM
[ 280.494] Initializing built-in extension XInputExtension
[ 280.494] Initializing built-in extension XTEST
[ 280.495] Initializing built-in extension BIG-REQUESTS
[ 280.495] Initializing built-in extension SYNC
[ 280.495] Initializing built-in extension XKEYBOARD
[ 280.495] Initializing built-in extension XC-MISC
[ 280.495] Initializing built-in extension SECURITY
[ 280.495] Initializing built-in extension XINERAMA
[ 280.495] Initializing built-in extension XFIXES
[ 280.496] Initializing built-in extension RENDER
[ 280.496] Initializing built-in extension RANDR
[ 280.496] Initializing built-in extension COMPOSITE
[ 280.496] Initializing built-in extension DAMAGE
[ 280.496] Initializing built-in extension MIT-SCREEN-SAVER
[ 280.496] Initializing built-in extension DOUBLE-BUFFER
[ 280.497] Initializing built-in extension RECORD
[ 280.497] Initializing built-in extension DPMS
[ 280.497] Initializing built-in extension X-Resource
[ 280.497] Initializing built-in extension XVideo
[ 280.497] Initializing built-in extension XVideo-MotionCompensation
[ 280.497] Initializing built-in extension SELinux
[ 280.497] Initializing built-in extension XFree86-VidModeExtension
[ 280.497] Initializing built-in extension XFree86-DGA
[ 280.498] Initializing built-in extension XFree86-DRI
[ 280.498] Initializing built-in extension DRI2
[ 280.498] (II) "glx" will be loaded by default.
[ 280.498] (WW) "xmir" is not to be loaded by default. Skipping.
[ 280.498] (II) LoadModule: "dri2"
[ 280.498] (II) Module "dri2" already built-in
[ 280.498] (II) LoadModule: "glamoregl"
[ 280.499] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 280.505] (II) Module glamoregl: vendor="X.Org Foundation"
[ 280.505] compiled for 1.14.2.901, module version = 0.5.1
[ 280.505] ABI class: X.Org ANSI C Emulation, version 0.4
[ 280.505] (II) LoadModule: "glx"
[ 280.506] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 280.506] (II) Module glx: vendor="X.Org Foundation"
[ 280.506] compiled for 1.14.3, module version = 1.0.0
[ 280.506] ABI class: X.Org Server Extension, version 7.0
[ 280.506] (==) AIGLX enabled
[ 280.507] Loading extension GLX
[ 280.507] (==) Matched openchrome as autoconfigured driver 0
[ 280.507] (==) Matched vesa as autoconfigured driver 1
[ 280.507] (==) Matched modesetting as autoconfigured driver 2
[ 280.507] (==) Matched fbdev as autoconfigured driver 3
[ 280.507] (==) Assigned the driver to the xf86ConfigLayout
[ 280.507] (II) LoadModule: "openchrome"
[ 280.507] (II) Loading /usr/lib/xorg/modules/drivers/openchrome_drv.so
[ 280.508] (II) Module openchrome: vendor="http://openchrome.org/"
[ 280.508] compiled for 1.14.1, module version = 0.3.1
[ 280.508] Module class: X.Org Video Driver
[ 280.508] ABI class: X.Org Video Driver, version 14.1
[ 280.508] (II) LoadModule: "vesa"
[ 280.509] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 280.509] (II) Module vesa: vendor="X.Org Foundation"
[ 280.509] compiled for 1.14.1, module version = 2.3.2
[ 280.509] Module class: X.Org Video Driver
[ 280.509] ABI class: X.Org Video Driver, version 14.1
[ 280.509] (II) LoadModule: "modesetting"
[ 280.510] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 280.510] (II) Module modesetting: vendor="X.Org Foundation"
[ 280.510] compiled for 1.14.1, module version = 0.8.0
[ 280.510] Module class: X.Org Video Driver
[ 280.510] ABI class: X.Org Video Driver, version 14.1
[ 280.510] (II) LoadModule: "fbdev"
[ 280.511] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 280.511] (II) Module fbdev: vendor="X.Org Foundation"
[ 280.511] compiled for 1.14.1, module version = 0.4.3
[ 280.511] Module class: X.Org Video Driver
[ 280.511] ABI class: X.Org Video Driver, version 14.1
[ 280.511] (II) OPENCHROME: Driver for VIA Chrome chipsets: CLE266, KM400/KN400,
K8M800/K8N800, PM800/PM880/CN400, VM800/P4M800Pro/VN800/CN700,
CX700/VX700, K8M890/K8N890, P4M890, P4M900/VN896/CN896, VX800/VX820,
VX855/VX875, VX900
[ 280.511] (II) VESA: driver for VESA chipsets: vesa
[ 280.511] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 280.512] (II) FBDEV: driver for framebuffer: fbdev
[ 280.512] (--) using VT number 8

[ 280.521] (!!) VIA Technologies does not support this driver in any way.
[ 280.521] (!!) For support, please refer to http://www.openchrome.org/.
[ 280.521] (!!) (openchrome 0.3.1 release)
[ 280.521] (WW) Falling back to old probe method for vesa
[ 280.521] (WW) Falling back to old probe method for modesetting
[ 280.521] (EE) open /dev/dri/card0: No such file or directory
[ 280.521] (WW) Falling back to old probe method for fbdev
[ 280.521] (II) Loading sub module "fbdevhw"
[ 280.521] (II) LoadModule: "fbdevhw"
[ 280.522] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 280.522] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 280.522] compiled for 1.14.3, module version = 0.0.2
[ 280.522] ABI class: X.Org Video Driver, version 14.1
[ 280.522] (EE) open /dev/fb0: No such file or directory
[ 280.523] (II) CHROME(0): VIAPreInit
[ 280.523] (II) CHROME(0): VIAGetRec
[ 280.523] (--) CHROME(0): Chipset: P4M900/VN896/CN896
[ 280.523] (--) CHROME(0): Chipset revision: 0
[ 280.612] (EE) CHROME(0): [drm] Failed to open DRM device for pci:0000:01:00.0: No such file or directory
[ 280.613] (II) Loading sub module "vgahw"
[ 280.613] (II) LoadModule: "vgahw"
[ 280.613] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 280.614] (II) Module vgahw: vendor="X.Org Foundation"
[ 280.614] compiled for 1.14.3, module version = 0.1.0
[ 280.614] ABI class: X.Org Video Driver, version 14.1
[ 280.614] (--) CHROME(0): Probed amount of VideoRAM = 65536 kB
[ 280.614] (II) CHROME(0): VIAMapMMIO
[ 280.614] (--) CHROME(0): mapping MMIO @ 0xfd000000 with size 0xd000
[ 280.614] (--) CHROME(0): mapping BitBlt MMIO @ 0xfd200000 with size 0x200000
[ 280.614] (II) CHROME(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
[ 280.614] (II) CHROME(0): VIAMapFB
[ 280.614] (--) CHROME(0): mapping framebuffer @ 0xf8000000 with size 0x4000000
[ 280.615] (--) CHROME(0): Frame buffer start: 0xb2a2d000, free start: 0x0 end: 0x4000000
[ 280.615] (II) CHROME(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 280.615] (==) CHROME(0): Depth 24, (--) framebuffer bpp 32
[ 280.615] (==) CHROME(0): RGB weight 888
[ 280.615] (==) CHROME(0): Default visual is TrueColor
[ 280.615] (II) CHROME(0): VIASetupDefaultOptions - Setting up default chipset options.
[ 280.615] (==) CHROME(0): Shadow framebuffer is disabled.
[ 280.615] (==) CHROME(0): Hardware acceleration is enabled.
[ 280.615] (==) CHROME(0): Using EXA acceleration architecture.
[ 280.615] (==) CHROME(0): EXA composite acceleration disabled.
[ 280.615] (==) CHROME(0): EXA scratch area size is 4096 kB.
[ 280.615] (==) CHROME(0): Using hardware two-color cursors and software full-color cursors.
[ 280.615] (==) CHROME(0): GPU virtual command queue will be enabled.
[ 280.615] (==) CHROME(0): DRI IRQ will be enabled if DRI is enabled.
[ 280.615] (==) CHROME(0): AGP DMA will be disabled if DRI is enabled.
[ 280.615] (==) CHROME(0): PCI DMA will not be used for XV image transfer if DRI is enabled.
[ 280.615] (==) CHROME(0): Will not enable VBE modes.
[ 280.615] (==) CHROME(0): VBE VGA register save & restore will not be used
if VBE modes are enabled.
[ 280.615] (==) CHROME(0): Xv Bandwidth check is enabled.
[ 280.615] (==) CHROME(0): Will not impose a limit on video RAM reserved for DRI.
[ 280.615] (==) CHROME(0): Will try to allocate 32768 kB of AGP memory.
[ 280.615] (==) CHROME(0): TV dotCrawl is disabled.
[ 280.615] (==) CHROME(0): TV deflicker is set to 0.
[ 280.615] (==) CHROME(0): No default TV type is set.
[ 280.615] (==) CHROME(0): No default TV output signal type is set.
[ 280.615] (==) CHROME(0): No default TV output port is set.
[ 280.615] (==) CHROME(0): Will not print VGA registers.
[ 280.615] (==) CHROME(0): Will not scan I2C buses.
[ 280.615] (II) CHROME(0): ...Finished parsing config file options.
[ 280.615] (EE) CHROME(0): Unknown Card-Ids (3371|1019|2125), Chipset: P4M900/VN896/CN896; please report to openchrome-users@openchrome.org
[ 280.615] (WW) CHROME(0): CLE266 Revision seems to be Cx, yet 0 was detected previously.
[ 280.616] (EE)
[ 280.616] (EE) Backtrace:
[ 280.616] (EE) 0: /usr/bin/X (xorg_backtrace+0x49) [0xb77150b9]
[ 280.616] (EE) 1: /usr/bin/X (0xb7575000+0x1a3e24) [0xb7718e24]
[ 280.616] (EE) 2: (vdso) (__kernel_rt_sigreturn+0x0) [0xb755240c]
[ 280.616] (EE) 3: /usr/lib/xorg/modules/drivers/openchrome_drv.so (0xb6c4f000+0x13a8c) [0xb6c62a8c]
[ 280.617] (EE) 4: /usr/bin/X (InitOutput+0xb23) [0xb75f6c33]
[ 280.617] (EE) 5: /usr/bin/X (0xb7575000+0x2a30b) [0xb759f30b]
[ 280.617] (EE) 6: /lib/i386-linux-gnu/libc.so.6 (__libc_start_main+0xf5) [0xb7159905]
[ 280.617] (EE) 7: /usr/bin/X (0xb7575000+0x2a908) [0xb759f908]
[ 280.617] (EE)
[ 280.617] (EE) Segmentation fault at address 0x0
[ 280.617] (EE)
Fatal server error:
[ 280.617] (EE) Caught signal 11 (Segmentation fault). Server aborting
[ 280.617] (EE)
[ 280.617] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 280.617] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 280.617] (EE)
[ 280.627] (EE) Server terminated with error (1). Closing log file.

Consigo chegar ate a parte de testar o kubuntu, alguem sabe me indicar como proceder com a instalação ?

Ja tentei desativando os parametros normais no F6

tenho um notebook compaq presario v6210br e comprei uma wireless edimax usb para acessar a internet pq a do note quebrou
mas nao esta sendo reconhecida pelo ubuntu 8, sei que a antena esta funcionando corretamente pq ja testei em outros micros

o que pode ser feito ?

Tenho um servidor apache rodando o site da empresa, gostaria de implementar com um chat on line sem ter que instalar ferramentas em php ( pq nao sei fazer isso )

Tem como colocar um chat apenas com um clique no site ?

Como implementar isso no servidor ?

Ola,

Alguem sabe como instalar o vmware, por que seguindo os tutoriais e mesmo usando os any nao funciona

Abraços

Ola,

Ouve um técnico em windows comentar que existe um programa que interpreta e fala o texto de um site ou o conteúdo de um documento do word.

Ele não me disse o nome do aplicativo que faz isso, será que existe algo assim para linux ? 

Alguem sabe como configurar para que tudo fique salvo ?

Ola,

Uma sobrinha pediu pra mim baixar as fotos do celular dela que usa um programinha for ruindows mas nao houve reconhecimento e montagem como uma camera digital.

Uso normalmente uma camera e nao sei o que tenho que ter instalado no ubuntu para ler o celular.

Valeu