Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Mensagens - dicadavid

Páginas: [1] 2 3 ... 8
1
Aplicativos / pcsx no ubuntu 18.04 - bloqueio menu de configuração dos controles
« Online: 29 de Novembro de 2018, 16:40 »
Instalei todos os aplicativos que sempre coloquei quando reinstalo o ubuntu mas desta vez nao consigo configurar o controle para jogar. Alguem sabe qual biblioteca se precisa para isso? Esse erro nao tinha visto nas versoes anteriores.

2
Distribuições Derivadas do Ubuntu / Re: ajustar a hora do pc entre linuxmint 17 matex64 e windows 8
« Online: 13 de Novembro de 2014, 09:41 »
basta ir no terminal e executar: sudo sed -i 's/UTC=yes/UTC=no/' /etc/default/rcS
que no meu caso resolveu. bios e linux com a mesma hora.

3
Distribuições Derivadas do Ubuntu / ajustar a hora do pc entre linuxmint 17 matex64 e windows 8 (resolvido)
« Online: 13 de Novembro de 2014, 08:04 »
instalei ontem o linuxmint 17 mate x64 e quando acessei a parte do windows 8 percebi que havia diferença na hora, no mint esta certa mas no windows fica 2 horas adiantado.
alguem sabe como resolver?

4
Instalação e Atualização / Re: rodar ubuntu 14.04 como windows to go utilizando pendrive ou cartao de memoria
« Online: 15 de Outubro de 2014, 15:57 »
desculpe a demora para postar novamente...
formatei o pendrive e instalei novamente utilizando o unetbootin e deu certo, pelo visto antes havia algum erro interno.
bom saber que da certo, pois quando perguntarem se existe solucao no ubuntu, saberei responder.

obrigado.

5
Instalação e Atualização / Re: Instalação de Ubuntu 14.04 no windows 8
« Online: 01 de Outubro de 2014, 10:19 »
se sua instalação do windows 8 for de fabrica, fica mais dificil.
no caso do meu notebook, tive que desativar o security boot, uefi, ativar o cms, instalar novamente o windows no hd, para depois instalar o ubuntu e que fosse encontrado pelo hd.

6
Instalação e Atualização / Re: rodar ubuntu 14.04 como windows to go utilizando pendrive ou cartao de memoria
« Online: 01 de Outubro de 2014, 10:12 »
seria a versão que possuo tem algum problema interno ou é assim que ele funciona? permite instalação mas perde os dados quando reinicia?

7
Instalação e Atualização / Re: rodar ubuntu 14.04 como windows to go utilizando pendrive ou cartao de memoria
« Online: 27 de Setembro de 2014, 11:19 »
como ativa modo persistente no unetbootin? não me lembro de nenhuma opção além reservar espaço, ja utilizei mas não mantem salvo quando reinicia, toda vez teria que instalar os programas novamente.

8
Instalação e Atualização / Re: rodar ubuntu 14.04 como windows to go utilizando pendrive ou cartao de memoria
« Online: 26 de Setembro de 2014, 20:03 »
infelizmente quando utilizei o unetbootin somente cria um live usb e nao permite ficar salvo nele os softwares instalados, quando reinicia o sistema volta ao original, por isso cite o windows to go.
alguem sabe como fazer para manter salvo as alterações ou outro software que faz isso?

9
Instalação e Atualização / rodar ubuntu como windows to go pelo pendrive ou cartao de memoria (resolvido)
« Online: 26 de Setembro de 2014, 13:27 »
tem como rodar ubuntu 14.04, ou qualquer versao dele, como é feito com o windows to go?
ate hoje somente consigo criar live usb mas nunca vi fazer isto... alguem sabe?

10
Distribuições Derivadas do Ubuntu / Re: erro quando utiliza o office 2007 no linux mint 17 cinnamon x64 (resolvido)
« Online: 21 de Julho de 2014, 21:10 »
muito bom este tutorial. aqui deu certo, obrigado.

11
Distribuições Derivadas do Ubuntu / erro quando utiliza o office 2007 no linux mint 17 cinnamon x64 (resolvido)
« Online: 21 de Julho de 2014, 10:52 »
apos a instalação do office 2007 via wine, quando abro o word e tento fechar ou salvar arquivo, da uma mensagem de erro, pede para reparar a instalação e pede msxml5. fiz o que se pede mas continua o erro.

alguem sabe como resolver?

12
Distribuições Derivadas do Ubuntu / Re: dificuldades com microfone imbutido num ultrabook
« Online: 21 de Julho de 2014, 09:38 »
aqui não aparece 2 microfones, um só local para ajuste. não sei se e pelo fato por não utilizar a porta de microfone externo.

como faria esta escolha?

13
Distribuições Derivadas do Ubuntu / Re: dificuldades com microfone imbutido num ultrabook
« Online: 20 de Julho de 2014, 09:45 »
não adiantou instalar os pacotes, quando não inicio o ruimdows primeiro, o microfone não funciona.

quando funciona, ele capta melhor que no ruimdows.
o que gostaria é não precisar iniciar o ruimdows para o microfone funcionar.

14
Distribuições Derivadas do Ubuntu / Re: dificuldades com microfone imbutido num ultrabook
« Online: 19 de Julho de 2014, 17:25 »
[   19.023694] input: USB2.0 HD UVC WebCam as /devices/pci0000:00/0000:00:13.2/usb2/2-2/2-2:1.0/input/input14
[   19.023852] usbcore: registered new interface driver uvcvideo
[   19.023856] USB Video Class driver (1.1.1)
[   19.032813] hda-intel 0000:00:01.1: Using LPIB position fix
[   19.032873] snd_hda_intel 0000:00:01.1: irq 81 for MSI/MSI-X
[   19.036610] hda-intel 0000:00:01.1: Enable sync_write for stable communication
[   19.046018] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input15
[   19.047101] hda-intel 0000:00:14.2: Using LPIB position fix
[   19.054264] hda-intel 0000:00:14.2: Enable sync_write for stable communication
[   19.067005] SKU: Nid=0x1d sku_cfg=0x40459a05
[   19.067012] SKU: port_connectivity=0x1
[   19.067015] SKU: enable_pcbeep=0x0
[   19.067018] SKU: check_sum=0x00000005
[   19.067021] SKU: customization=0x0000009a
[   19.067023] SKU: external_amp=0x0
[   19.067026] SKU: platform_type=0x1
[   19.067028] SKU: swap=0x0
[   19.067030] SKU: override=0x1
[   19.068052] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   19.068058]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   19.068061]    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   19.068063]    mono: mono_out=0x0
[   19.068066]    inputs:
[   19.068069]      Internal Mic=0x1a
[   19.068072]      Mic=0x19
[   19.068075] realtek: No valid SSID, checking pincfg 0x40459a05 for NID 0x1d
[   19.068079] realtek: Enabling init ASM_ID=0x9a05 CODEC_ID=10ec0233
[   19.081124] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input17
[   19.083185] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input16
[   19.232296] asus_wmi: ASUS WMI generic driver loaded
[   19.235921] asus_wmi: Initialization: 0x1
[   19.236000] asus_wmi: BIOS WMI version: 0.0
[   19.236272] asus_wmi: SFUN value: 0x4a0077
[   19.244796] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input18
[   19.339249] asus_wmi: Backlight controlled by ACPI video driver
[   19.399528] cfg80211: World regulatory domain updated:
[   19.399537] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   19.399542] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.399546] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.399550] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   19.399553] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.399557] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.561209] init: failsafe main process (750) killed by TERM signal
[   19.960418] Bluetooth: Core ver 2.17
[   19.960618] NET: Registered protocol family 31
[   19.960623] Bluetooth: HCI device and connection manager initialized
[   19.960638] Bluetooth: HCI socket layer initialized
[   19.960644] Bluetooth: L2CAP socket layer initialized
[   19.960656] Bluetooth: SCO socket layer initialized
[   19.968707] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   19.968715] Bluetooth: BNEP filters: protocol multicast
[   19.968732] Bluetooth: BNEP socket layer initialized
[   19.971348] Bluetooth: RFCOMM TTY layer initialized
[   19.971370] Bluetooth: RFCOMM socket layer initialized
[   19.971382] Bluetooth: RFCOMM ver 1.11
[   20.386466] init: cups main process (845) killed by HUP signal
[   20.386498] init: cups main process ended, respawning
[   21.942296] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   21.945593] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   22.136965] r8169 0000:02:00.0 eth0: link down
[   22.137053] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   22.137823] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   22.643111] init: samba-ad-dc main process (926) terminated with status 1
[   22.817847] init: udev-fallback-graphics main process (965) terminated with status 1
[   23.050341] wlan0: authenticate with 00:1c:f0:85:a1:ac
[   23.067571] wlan0: send auth to 00:1c:f0:85:a1:ac (try 1/3)
[   23.069614] wlan0: authenticated
[   23.069856] ath9k 0000:01:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[   23.069862] ath9k 0000:01:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[   23.069866] ath9k 0000:01:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[   23.070940] wlan0: associate with 00:1c:f0:85:a1:ac (try 1/3)
[   23.073622] wlan0: RX AssocResp from 00:1c:f0:85:a1:ac (capab=0x431 status=0 aid=1)
[   23.073946] wlan0: associated
[   23.074012] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   25.727991] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
[   25.886896] init: plymouth-upstart-bridge main process ended, respawning
[   25.900155] init: plymouth-upstart-bridge main process (1634) terminated with status 1
[   25.900188] init: plymouth-upstart-bridge main process ended, respawning
[   26.652826] init: plymouth-stop pre-start process (1730) terminated with status 1
[   26.997148] fglrx_pci 0000:00:01.0: irq 82 for MSI/MSI-X
[   26.998877] <6>[fglrx] Firegl kernel thread PID: 1737
[   26.999059] <6>[fglrx] Firegl kernel thread PID: 1738
[   26.999229] <6>[fglrx] Firegl kernel thread PID: 1739
[   26.999433] <6>[fglrx] IRQ 82 Enabled
[   27.008870] <6>[fglrx] Reserved FB block: Shared offset:0, size:1000000
[   27.008876] <6>[fglrx] Reserved FB block: Unshared offset:fc51000, size:3000
[   27.008879] <6>[fglrx] Reserved FB block: Unshared offset:fc54000, size:3ac000
[   27.008883] <6>[fglrx] Reserved FB block: Unshared offset:1ffc8000, size:38000
[   27.099524] <6>[fglrx] ATIF platform detected with notification ID: 0x81
[   75.557777] <3>[fglrx:IRQMGR_callback_hifreq_interrupt] *ERROR* irqSourceID = 0xff000121 is unknown

15
Distribuições Derivadas do Ubuntu / Re: dificuldades com microfone imbutido num ultrabook
« Online: 19 de Julho de 2014, 17:24 »
[    2.001846] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    2.025078] systemd-udevd[117]: starting version 204
[    2.053658] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    2.053775] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    2.061577] ACPI Error: [^^^PB2_.VGA_.AFN7] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
[    2.061592] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.LCDD._BCM] (Node ffff880139075988), AE_NOT_FOUND (20131115/psparse-536)
[    2.061607] ACPI Error: Evaluating _BCM failed (20131115/video-383)
[    2.061783] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input9
[    2.074851] wmi: Mapper loaded
[    2.083645] sdhci: Secure Digital Host Controller Interface driver
[    2.083652] sdhci: Copyright(c) Pierre Ossman
[    2.089991] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.090016] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    2.090946] sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7813] (rev 1)
[    2.091098] sdhci-pci 0000:00:14.7: dummy supplies not allowed
[    2.091103] mmc0: no vqmmc regulator found
[    2.091107] sdhci-pci 0000:00:14.7: dummy supplies not allowed
[    2.091110] mmc0: no vmmc regulator found
[    2.091261] mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA
[    2.097017] ahci 0000:00:11.0: version 3.0
[    2.097260] ahci 0000:00:11.0: irq 79 for MSI/MSI-X
[    2.097367] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    2.097375] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[    2.097732] r8169 0000:02:00.0: irq 80 for MSI/MSI-X
[    2.098037] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xffffc90000656000, e0:3f:49:ef:f6:5e, XID 10900800 IRQ 80
[    2.098043] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    2.141394] usb 2-2: new high-speed USB device number 2 using ehci-pci
[    2.153649] scsi0 : ahci
[    2.153853] scsi1 : ahci
[    2.153943] ata1: SATA max UDMA/133 abar m1024@0xfeb6f000 port 0xfeb6f100 irq 79
[    2.153949] ata2: SATA max UDMA/133 abar m1024@0xfeb6f000 port 0xfeb6f180 irq 79
[    2.307313] usb 2-2: New USB device found, idVendor=04f2, idProduct=b40a
[    2.307322] usb 2-2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    2.307327] usb 2-2: Product: USB2.0 HD UVC WebCam
[    2.307331] usb 2-2: Manufacturer: Chicony Electronics Co.,Ltd.
[    2.307335] usb 2-2: SerialNumber: 0x0001
[    2.513456] psmouse serio4: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[    2.545401] tsc: Refined TSC clocksource calibration: 1497.191 MHz
[    2.645542] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.645575] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.646499] ata1.00: ATA-8: HGST HTS545032A7E680, GGBOAF10, max UDMA/133
[    2.646504] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), a
[    2.647489] ata1.00: configured for UDMA/133
[    2.647817] scsi 0:0:0:0: Direct-Access     ATA      HGST HTS545032A7 GGBO PQ: 0 ANSI: 5
[    2.648111] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    2.648116] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.648162] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.648371] sd 0:0:0:0: [sda] Write Protect is off
[    2.648377] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.648463] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.648656] ata2.00: ATAPI: HL-DT-ST DVDRAM GU71N, AS00, max UDMA/133
[    2.650095] ata2.00: configured for UDMA/133
[    2.655179] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GU71N     AS00 PQ: 0 ANSI: 5
[    2.668412] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.668421] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.668729] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.668860] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.722125]  sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
[    2.723260] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.005313] psmouse serio4: elantech: assuming hardware version 4 (with firmware version 0x361f03)
[    3.018045] psmouse serio4: elantech: Synaptics capabilities query result 0x10, 0x14, 0x0e.
[    3.080969] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input13
[    3.545788] Switched to clocksource tsc
[    4.808747] platform microcode: Direct firmware load failed with error -2
[    4.808750] platform microcode: Falling back to user helper
[    5.083325] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[    5.170812] random: nonblocking pool is initialized
[   18.194401] Adding 3607548k swap on /dev/sda7.  Priority:-1 extents:1 across:3607548k FS
[   18.259849] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   18.386089] systemd-udevd[376]: starting version 204
[   18.509386] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[   18.569601] lp: driver loaded but no devices found
[   18.584929] ppdev: user-space parallel port driver
[   18.680484] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[   18.680492] AMD IOMMUv2 functionality not available on this system
[   18.691247] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[   18.691256] Disabling lock debugging due to kernel taint
[   18.702383] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SBSM 1 (20131115/utaddress-251)
[   18.702398] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   18.729330] MCE: In-kernel MCE decoding enabled.
[   18.738933] EDAC MC: Ver: 3.0.0
[   18.750773] AMD64 EDAC driver v3.4.0
[   18.750839] EDAC amd64: DRAM ECC disabled.
[   18.750852] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[   18.750852]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[   18.750852]  (Note that use of the override may cause unknown side effects.)
[   18.755378] cfg80211: Calling CRDA to update world regulatory domain
[   18.791783] fglrx: module verification failed: signature and/or  required key missing - tainting kernel
[   18.831872] <6>[fglrx] Maximum main memory to use for locked dma buffers: 3175 MBytes.
[   18.831929] <6>[fglrx]   vendor: 1002 device: 9832 count: 1
[   18.833564] <6>[fglrx] ioport: bar 4, base 0xf000, size: 0x100
[   18.834347] <6>[fglrx] Kernel PAT support is enabled
[   18.834386] <6>[fglrx] module loaded - fglrx 13.35.5 [Mar 12 2014] with 1 minors
[   18.872739] ip_tables: (C) 2000-2006 Netfilter Core Team
[   18.894899] kvm: Nested Virtualization enabled
[   18.894909] kvm: Nested Paging enabled
[   18.903186] device-mapper: multipath: version 1.6.0 loaded
[   18.911688] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   18.945968] ath: EEPROM regdomain: 0x65
[   18.945975] ath: EEPROM indicates we should expect a direct regpair map
[   18.945980] ath: Country alpha2 being used: 00
[   18.945983] ath: Regpair used: 0x65
[   18.955863] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   18.967312] Linux video capture interface: v2.00
[   18.973452] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   18.974138] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90010e00000, irq=28
[   18.993691] uvcvideo: Found UVC 1.00 device USB2.0 HD UVC WebCam (04f2:b40a)

Páginas: [1] 2 3 ... 8