Fórum Ubuntu Linux - PT
Suporte Técnico => Aplicativos => Tópico iniciado por: Fagner Patricio em 18 de Janeiro de 2006, 21:49
-
Olá pessoal, estou a alguns dias tentanto sem sucesso colocar um aplicativo para que eu possa ver a temperatura da minha CPU, eu estou tentando usar o ACPI, e não conheço outro, só que está dando uns paus aqui, vejam só, quando eu tento dar esse comando:
fagner@papagaio:~$ acpi -t
No support for device type: thermal
fagner@papagaio:~$
ele dar esse erro, no manual não vi outra forma, alguém pode me ajudar? :)
-
Já testou o Gkrellm ? =D
-
Para poder visualizar as temperaturas do seu sistema você terá que instalar o lm-sensors:
sudo apt-get install lm-sensors
Depois terá que configurar ele:
sudo sensors-detect
Responda as perguntas, quando terminado o tutorial reinicie o sistema!
Se quiser ver o relatório completo pelo terminal é só digitar:
sensors
Se quiser visualizar de maneira gráfica, instale o Gkrellm pelo Synaptic mesmo. Acho que o Gdesklets também pode fazer isso.
Exemplo do relatório pelo terminal:
Adapter: ISA adapter
VCore 1: +1.65 V (min = +1.57 V, max = +1.73 V)
VCore 2: +2.64 V (min = +1.57 V, max = +1.73 V)
+3.3V: +3.28 V (min = +3.14 V, max = +3.47 V)
+5V: +5.11 V (min = +4.76 V, max = +5.24 V)
+12V: +11.86 V (min = +10.82 V, max = +13.19 V)
-12V: -7.01 V (min = -13.18 V, max = -10.80 V)
-5V: -2.64 V (min = -5.25 V, max = -4.75 V)
V5SB: +5.48 V (min = +4.76 V, max = +5.24 V)
VBat: +3.01 V (min = +2.40 V, max = +3.60 V)
fan1: 3668 RPM (min = 5000 RPM, div = 2)
fan2: 0 RPM (min = 20454 RPM, div = 2)
fan3: 0 RPM (min = 39705 RPM, div = 2)
temp1: +43°C (high = +37°C, hyst = +16°C) sensor = thermistor
temp2: +54.0°C (high = +66°C, hyst = +61°C) sensor = thermistor
temp3: +57.0°C (high = +66°C, hyst = +61°C) sensor = thermistor
vid: +1.650 V (VRM Version 9.0)
alarms: Chassis intrusion detection ALARM
beep_enable:
Sound alarm disabled
eeprom-i2c-0-52
Adapter: SMBus nForce2 adapter at 5000
Memory type: DDR SDRAM DIMM
Memory size (MB): 512
eeprom-i2c-0-50
Adapter: SMBus nForce2 adapter at 5000
Memory type: DDR SDRAM DIMM
Memory size (MB): 512
Té+
-
Agradeço as dicas sobre o LM, mas não consigo entender direito o output do comando sensors. Aqui saiu isso:
it87-isa-0290
Adapter: ISA adapter
VCore 1: +1.78 V (min = +4.08 V, max = +4.08 V) ALARM
VCore 2: +2.50 V (min = +4.08 V, max = +4.08 V) ALARM
+3.3V: +3.26 V (min = +8.16 V, max = +8.16 V) ALARM
+5V: +4.81 V (min = +6.85 V, max = +6.85 V) ALARM
+12V: +12.22 V (min = +16.32 V, max = +16.32 V) ALARM
-12V: -14.72 V (min = +3.93 V, max = +3.93 V) ALARM
-5V: -9.76 V (min = +4.03 V, max = +4.03 V) ALARM
Stdby: +5.03 V (min = +6.85 V, max = +6.85 V) ALARM
VBat: +0.00 V
fan1: 0 RPM (min = 0 RPM, div = 4)
fan2: 4927 RPM (min = 0 RPM, div = 2)
fan3: 0 RPM (min = 0 RPM, div = 2)
M/B Temp: +41°C (low = -1°C, high = -1°C) sensor = thermistor
CPU Temp: +63°C (low = +70°C, high = +80°C) sensor = thermistor
Temp3: -55°C (low = -1°C, high = -1°C) sensor = thermistor
Tem uns "alarms" ali no alto, mas que raios é aquilo? Não entendi lhufas... alguém pode me ajudar a traduzir e entender esse treco? :roll: [/code]
-
Ninguém saberia mesmo me dar uma ajuda? Eu estou meio preocupado com a temperatura do meu PC, meu quarto é quente pacas...
-
it8712-isa-0290
Adapter: ISA adapter
VCore 1: +1.62 V (min = +1.42 V, max = +1.57 V) ALARM
VCore 2: +0.00 V (min = +2.40 V, max = +2.61 V) ALARM
+3.3V: +6.37 V (min = +3.14 V, max = +3.46 V) ALARM
+5V: +4.81 V (min = +4.76 V, max = +5.24 V) ALARM
+12V: +12.61 V (min = +11.39 V, max = +12.61 V) ALARM
-12V: -27.36 V (min = -12.63 V, max = -11.41 V) ALARM
-5V: -13.64 V (min = -5.26 V, max = -4.77 V) ALARM
Stdby: +5.05 V (min = +4.76 V, max = +5.24 V)
VBat: +3.31 V
fan1: 6308 RPM (min = 0 RPM, div = 2)
fan2: 0 RPM (min = 2657 RPM, div = 2) ALARM
fan3: 0 RPM (min = 2657 RPM, div = 2) ALARM
M/B Temp: +48°C (low = +15°C, high = +40°C) sensor = thermistor
CPU Temp: +38°C (low = +15°C, high = +45°C) sensor = thermistor
Temp3: -1°C (low = +15°C, high = +45°C) sensor = disabled ALARM
eeprom-i2c-0-50
Adapter: SMBus Via Pro adapter at e800
Memory type: DDR SDRAM DIMM
Memory size (MB): 512
Eu também fiquei preocupado agora...
o que viria a ser essa linha:
+3.3V: +6.37 V (min = +3.14 V, max = +3.46 V) ALARM
Parece que não ta certo né?
E mais uma dúvida, com isso que foi instalado seria possivel eu verificar as temperaturas com o Karamba?
Até hoje não consegui fazer funcionar em nenhuma distro...
-
Acho que o que interessa é isso aqui:
M/B Temp: +41°C (low = -1°C, high = -1°C) sensor = thermistor
CPU Temp: +63°C (low = +70°C, high = +80°C) sensor = thermistor
A primeira é a temperatura da placa mãe. A segunda a do processador.
Acho que ta bom. Num tem risco de queimar mas seria legal baixar um pouco a temperatura do Processador. Talvez um exaustor ai atraz deve ajudar pra baixar pra uns 50.
Aqui em casa eu coloquei um cooler legal e ficou em 48º com a rotação mínima do cooler. Eu posso aumentar a potencia dele ainda por um botãozinho de malandro aqui hehehe. Dai cai mais ainda mas só faço isso quando vou jogar.
-
Estranho que seu coolar ta a mais de 6mil RPM e da tudo isso de temperatura. Deve ser bem ruinzinho heim.
Aqui com 2700rpm eu deixo em 41ºC e o cooler vai até 4000rpm.
É um Athlon XP 1700+ beeem velhinho ja. Esquenta bastante inclusive.
-
Estranho que seu coolar ta a mais de 6mil RPM e da tudo isso de temperatura. Deve ser bem ruinzinho heim.
Aqui com 2700rpm eu deixo em 41ºC e o cooler vai até 4000rpm.
É um Athlon XP 1700+ beeem velhinho ja. Esquenta bastante inclusive.
Você fala do meu né?
É bem ruinzinho mesmo, eu to usando um cooler velho que era do meu processador AMD antigo (acho que era 800 mhz)... o cooler dele mesmo era meio vagabundo e estorou uma das pás, aí já sabe né, sem dinheiro a gente faz uma "gambiarra provisória-permanente"...
eu to esperando sobrar algum dinheiro pra poder comprar novos coolers (bons dessa vez) pro pc, o da placa de vídeo e da placa-mãe também são "gambiarras" que eu fiz com um coolers de pcs velhos que tinha em casa...
---
mas e quanto ao trecho que eu citei anteriormente, ele não quer dizer nada?
eu não entendi o que significa e não achei informação sobre aquilo..
-
Para poder visualizar as temperaturas do seu sistema você terá que instalar o lm-sensors:
sudo apt-get install lm-sensors
Depois terá que configurar ele:
sudo sensors-detect
Responda as perguntas, quando terminado o tutorial reinicie o sistema!
Se quiser ver o relatório completo pelo terminal é só digitar:
sensors
Se quiser visualizar de maneira gráfica, instale o Gkrellm pelo Synaptic mesmo. Acho que o Gdesklets também pode fazer isso.
Desculpe vir aqui com uma "dúvida" e não com uma solução, mas gostaria de saber se existe algum site ou se tem algum material de referência para que eu possa descobrir cada parametro do SENSORS. Vi exatamente isso que mencionou galactus, no entanto não obtive o resultado esperado.
Abaixo coloco o procedimento para que possam ver, se fiz algo "equivocado"...
root@Nihon:/home/ichigo# sudo sensors-detect
This program will help you determine which I2C/SMBus modules you need to
load to use lm_sensors most effectively. You need to have i2c and
lm_sensors installed before running this program.
Also, you need to be `root', or at least have access to the /dev/i2c-*
files, for most things.
If you have patched your kernel and have some drivers built in, you can
safely answer NO if asked to load some modules. In this case, things may
seem a bit confusing, but they will still work.
It is generally safe and recommended to accept the default answers to all
questions, unless you know what you're doing.
We can start with probing for (PCI) I2C or SMBus adapters.
You do not need any special privileges for this.
Do you want to probe now? (YES/no): YES
Probing for PCI bus adapters...
Use driver `i2c-i801' for device 00:1f.3: Intel 82801DB ICH4
Probe succesfully concluded.
We will now try to load each adapter module in turn.
Module `i2c-i801' already loaded.
If you have undetectable or unsupported adapters, you can have them
scanned by manually loading the modules before running this script.
To continue, we need module `i2c-dev' to be loaded.
If it is built-in into your kernel, you can safely skip this.
i2c-dev is not loaded. Do you want to load it now? (YES/no): YES
Module loaded succesfully.
We are now going to do the adapter probings. Some adapters may hang halfway
through; we can't really help that. Also, some chips will be double detected;
we choose the one with the highest confidence value in that case.
If you found that the adapter hung after probing a certain address, you can
specify that address to remain unprobed. That often
includes address 0x69 (clock chip).
Next adapter: ACPI EC SMBus adapter at 0018
Do you want to scan it? (YES/no/selectively): YES
Client found at address 0x0b
Probing for `Smart Battery'... Success!
(confidence 5, driver `smartbatt')
Client found at address 0x4c
Probing for `National Semiconductor LM75'... Failed!
Probing for `Dallas Semiconductor DS1621'... Failed!
Probing for `Analog Devices ADM1021'... Failed!
Probing for `Analog Devices ADM1021A/ADM1023'... Failed!
Probing for `Maxim MAX1617'... Failed!
Probing for `Maxim MAX1617A'... Failed!
Probing for `TI THMC10'... Failed!
Probing for `National Semiconductor LM84'... Failed!
Probing for `Genesys Logic GL523SM'... Failed!
Probing for `Onsemi MC1066'... Failed!
Probing for `Maxim MAX1619'... Failed!
Probing for `National Semiconductor LM82'... Failed!
Probing for `National Semiconductor LM83'... Failed!
Probing for `National Semiconductor LM90'... Failed!
Probing for `National Semiconductor LM89/LM99'... Failed!
Probing for `National Semiconductor LM86'... Failed!
Probing for `Analog Devices ADM1032'... Failed!
Probing for `Maxim MAX6657/MAX6658/MAX6659'... Failed!
Probing for `National Semiconductor LM63'... Failed!
Probing for `Maxim MAX6633/MAX6634/MAX6635'... Failed!
Probing for `Analog Devices ADT7461'... Failed!
Client at address 0x50 can not be probed - unload all client drivers first!
Client at address 0x51 can not be probed - unload all client drivers first!
Client at address 0x52 can not be probed - unload all client drivers first!
Client at address 0x53 can not be probed - unload all client drivers first!
Next adapter: SMBus I801 adapter at 1880
Do you want to scan it? (YES/no/selectively): YES
Client at address 0x50 can not be probed - unload all client drivers first!
Client at address 0x51 can not be probed - unload all client drivers first!
Client found at address 0x69
Some chips are also accessible through the ISA bus. ISA probes are
typically a bit more dangerous, as we have to write to I/O ports to do
this. This is usually safe though.
Do you want to scan the ISA bus? (YES/no): YES
Probing for `National Semiconductor LM78'
Trying address 0x0290... Failed!
Probing for `National Semiconductor LM78-J'
Trying address 0x0290... Failed!
Probing for `National Semiconductor LM79'
Trying address 0x0290... Failed!
Probing for `Winbond W83781D'
Trying address 0x0290... Failed!
Probing for `Winbond W83782D'
Trying address 0x0290... Failed!
Probing for `Winbond W83627HF'
Trying address 0x0290... Failed!
Probing for `Winbond W83627EHF'
Trying address 0x0290... Failed!
Probing for `Winbond W83697HF'
Trying address 0x0290... Failed!
Probing for `Silicon Integrated Systems SIS5595'
Trying general detect... Failed!
Probing for `VIA Technologies VT82C686 Integrated Sensors'
Trying general detect... Failed!
Probing for `VIA Technologies VT8231 Integrated Sensors'
Trying general detect... Failed!
Probing for `ITE IT8712F'
Trying address 0x0290... Failed!
Probing for `ITE IT8705F / SiS 950'
Trying address 0x0290... Failed!
Probing for `IPMI BMC KCS'
Trying address 0x0ca0... Failed!
Probing for `IPMI BMC SMIC'
Trying address 0x0ca8... Failed!
Some Super I/O chips may also contain sensors. Super I/O probes are
typically a bit more dangerous, as we have to write to I/O ports to do
this. This is usually safe though.
Do you want to scan for Super I/O sensors? (YES/no): YES
Probing for `ITE 8702F Super IO Sensors'
Failed! (0xec11)
Probing for `ITE 8705F Super IO Sensors'
Failed! (0xec11)
Probing for `ITE 8712F Super IO Sensors'
Failed! (0xec11)
Probing for `Nat. Semi. PC87351 Super IO Fan Sensors'
Failed! (0xec)
Probing for `Nat. Semi. PC87360 Super IO Fan Sensors'
Failed! (0xec)
Probing for `Nat. Semi. PC87363 Super IO Fan Sensors'
Failed! (0xec)
Probing for `Nat. Semi. PC87364 Super IO Fan Sensors'
Failed! (0xec)
Probing for `Nat. Semi. PC87365 Super IO Fan Sensors'
Failed! (0xec)
Probing for `Nat. Semi. PC87365 Super IO Voltage Sensors'
Failed! (0xec)
Probing for `Nat. Semi. PC87365 Super IO Thermal Sensors'
Failed! (0xec)
Probing for `Nat. Semi. PC87366 Super IO Fan Sensors'
Failed! (0xec)
Probing for `Nat. Semi. PC87366 Super IO Voltage Sensors'
Failed! (0xec)
Probing for `Nat. Semi. PC87366 Super IO Thermal Sensors'
Failed! (0xec)
Probing for `Nat. Semi. PC87372 Super IO Fan Sensors'
Failed! (0xec)
Probing for `Nat. Semi. PC87373 Super IO Fan Sensors'
Failed! (0xec)
Probing for `Nat. Semi. PC87591 Super IO'
Success... but not activated
Probing for `Nat. Semi. PC87371 Super IO'
Failed! (0xec)
Probing for `Nat. Semi. PC97371 Super IO'
Failed! (0xec)
Probing for `Nat. Semi. PC8739x Super IO'
Failed! (0xec)
Probing for `Nat. Semi. PC8741x Super IO'
Failed! (0xec)
Probing for `SMSC 47B27x Super IO Fan Sensors'
Failed! (0xec)
Probing for `SMSC 47M10x/13x Super IO Fan Sensors'
Failed! (0xec)
Probing for `SMSC 47M14x Super IO Fan Sensors'
Failed! (0xec)
Probing for `SMSC 47M15x/192 Super IO Fan Sensors'
Failed! (0xec)
Probing for `SMSC 47S42x Super IO Fan Sensors'
Failed! (0xec)
Probing for `SMSC 47S45x Super IO Fan Sensors'
Failed! (0xec)
Probing for `SMSC 47M172 Super IO'
Failed! (0xec)
Probing for `SMSC LPC47B397-NC Super IO'
Failed! (0xec)
Probing for `VT1211 Super IO Sensors'
Failed! (0xec)
Probing for `Winbond W83627HF Super IO Sensors'
Failed! (0xec)
Probing for `Winbond W83627THF Super IO Sensors'
Failed! (0xec)
Probing for `Winbond W83637HF Super IO Sensors'
Failed! (0xec)
Probing for `Winbond W83697HF Super IO Sensors'
Failed! (0xec)
Probing for `Winbond W83697SF/UF Super IO PWM'
Failed! (0xec)
Probing for `Winbond W83L517D Super IO'
Failed! (0xec)
Probing for `Winbond W83627EHF Super IO Sensors'
Failed! (0xec11)
Do you want to scan for secondary Super I/O sensors? (YES/no): YES
Probing for `ITE 8702F Super IO Sensors'
Failed! (skipping family)
Probing for `Nat. Semi. PC87351 Super IO Fan Sensors'
Failed! (skipping family)
Probing for `SMSC 47B27x Super IO Fan Sensors'
Failed! (skipping family)
Probing for `VT1211 Super IO Sensors'
Failed! (skipping family)
Probing for `Winbond W83627EHF Super IO Sensors'
Failed! (skipping family)
Now follows a summary of the probes I have just done.
Just press ENTER to continue:
Driver `smartbatt' (should be inserted):
Detects correctly:
* Bus `ACPI EC SMBus adapter at 0018'
Busdriver `UNKNOWN', I2C address 0x0b
Chip `Smart Battery' (confidence: 5)
I will now generate the commands needed to load the I2C modules.
Sometimes, a chip is available both through the ISA bus and an I2C bus.
ISA bus access is faster, but you need to load an additional driver module
for it. If you have the choice, do you want to use the ISA bus or the
I2C/SMBus (ISA/smbus)? ISA
To make the sensors modules behave correctly, add these lines to
/etc/modules:
#----cut here----
# I2C adapter drivers
# modprobe unknown adapter ACPI EC SMBus adapter at 0018
# I2C chip drivers
# Warning: the required module smartbatt is not currently installed on your system.
# For status of 2.6 kernel ports see http://secure.netroedge.com/~lm78/supported.html
# If driver is built-in to the kernel, or unavailable, comment out the following line.
smartbatt
#----cut here----
Do you want to add these lines to /etc/modules automatically? (yes/NO)yes
E para visualizar aparece apenas essas informações....
root@Nihon:/home/ichigo# sensors
eeprom-i2c-1-53
Adapter: ACPI EC SMBus adapter at 0018
Unknown EEPROM type (255).
eeprom-i2c-1-52
Adapter: ACPI EC SMBus adapter at 0018
Unknown EEPROM type (255).
eeprom-i2c-1-51
Adapter: ACPI EC SMBus adapter at 0018
Unknown EEPROM type (255).
eeprom-i2c-1-50
Adapter: ACPI EC SMBus adapter at 0018
Unknown EEPROM type (255).
eeprom-i2c-0-51
Adapter: SMBus I801 adapter at 1880
Memory type: DDR SDRAM DIMM
Memory size (MB): 256
eeprom-i2c-0-50
Adapter: SMBus I801 adapter at 1880
Memory type: DDR SDRAM DIMM
Memory size (MB): 256
Os gDeskLets também não funcionam... O que me deixa bastante chateado, pois já tentei várias vezes configurar esse sensors mas ainda não consegui... Talvez possa ser "problema" do Hardware, pois estou utilizando o Ubuntu em um note Pentium M, não sei... É apenas mais uma especulação...
Abracos,
Henrique
-
Caro Ichigo, o que aconteceu é que ele não foi capaz de encontrar nenhum módulo compatível com o seu Chipset para poder realizar a leitura das temperaturas do mesmo.
Qual a configuração do seu Hardware?
Agora não estou no Ubuntu, mas qual é a versão do lm-sensors no Ubuntu? Na página do desenvolvedor já está na 2.10.0 . Talvez uma versão mais nova resolva. Mas você terá que compilar este pacote.
http://secure.netroedge.com/~lm78/download.html
Melhor ainda, você poderá ver aqui: http://secure.netroedge.com/~lm78/supported.html Todos os CHIPSETS suportados.
-
Valeu pela ajuda pessoal!
M/B Temp: +41°C (low = -1°C, high = -1°C) sensor = thermistor
E o que significam esses "low" e "high"? Os dois marcam a mesma temperatura... não seria a temperatura mínima e a máxima indicados?
-
aki naum funfo :(
root@admlnx05:/home/bru# sensors-detect
No i2c device files found. Use prog/mkdev/mkdev.sh to create them.
-
O mesmo ocorreu aqui!
-
Ao compilar o pacote, me deparei com a seguinte mensagem... Alguém já se deparou com este problema!?
Makefile:108: *** For 2.6 kernels and later, use "make user_install". Pare.
root@Nihon:/home/ichigo/Downloads/lm_sensors-2.10.0# make user_install
grep: /usr/src/linux/include/linux/autoconf.h: Arquivo ou diretório não encontrado
grep: /usr/src/linux/include/linux/autoconf.h: Arquivo ou diretório não encontrado
make: *** Sem regra para processar o alvo `sysfs/libsysfs.h', necessário por `li b/sysfs.ad'. Pare.
Abracos
-
podem me ajudar?
Meu processador eh um sempron.
Quando utilizo muito o ubuntu o sistema finaliza e mostra uma mensagem dizendo q a temperatura do processador tah muito alta.(em torno de 60°).
60° eh uma temperatura muito alta para um sempron?
pelo sensors saiu essas informações abaixo,
O que eu posso fazer para acabar com esse desligamento automático?
it87-isa-0290
Adapter: ISA adapter
VCore 1: +1.70 V (min = +1.42 V, max = +1.57 V) ALARM
VCore 2: +3.31 V (min = +2.40 V, max = +2.61 V) ALARM
+3.3V: +5.92 V (min = +3.14 V, max = +3.46 V) ALARM
+5V: +5.21 V (min = +4.76 V, max = +5.24 V)
+12V: +8.38 V (min = +11.39 V, max = +12.61 V) ALARM
-12V: -13.37 V (min = -12.63 V, max = -11.41 V) ALARM
-5V: -7.68 V (min = -5.26 V, max = -4.77 V) ALARM
Stdby: +3.28 V (min = +4.76 V, max = +5.24 V) ALARM
VBat: +0.00 V
fan1: 4821 RPM (min = 0 RPM, div = 8)
fan2: 0 RPM (min = 664 RPM, div = 8) ALARM
fan3: 0 RPM (min = 664 RPM, div = 8)
M/B Temp: +55°C (low = +15°C, high = +40°C) sensor = diode
CPU Temp: +0°C (low = +15°C, high = +45°C) sensor = disabled
Temp3: +0°C (low = +15°C, high = +45°C) sensor = disabled
desde já muito obrigado!
-
Tem determinadas placas que o sensors ainda não é compativel.
Por exemplo a minha é a P4S800, que o sensors só detecta a memória.
Para ver a temperatura eu uso o mbmon, ele lista as voltagens, temperaturas, e a velocidade da fan.
tem no repositório do ubuntu
no teminal:
sudo apt-get install mbmon;
depois é so entrar
sudo mbmon
carlos2
-
Ola
é impressão minha ou o sensors nao conseguiu detectar minha o chipset da minha cpu:
eduardo@eduardo:~$ sensors
it87-isa-0290
Adapter: ISA adapter
VCore 1: +1.49 V (min = +0.00 V, max = +4.08 V)
VCore 2: +2.94 V (min = +1.28 V, max = +1.68 V) ALARM
+3.3V: +5.66 V (min = +5.57 V, max = +7.55 V)
+5V: +5.19 V (min = +4.49 V, max = +5.48 V)
+12V: +7.49 V (min = +9.98 V, max = +13.95 V) ALARM
-12V: -11.77 V (min = -22.94 V, max = -17.05 V) ALARM
-5V: -2.76 V (min = -9.14 V, max = -7.75 V) ALARM
Stdby: +3.95 V (min = +4.49 V, max = +5.48 V) ALARM
VBat: +0.00 V
fan1: 4218 RPM (min = 664 RPM, div = 8)
fan2: 0 RPM (min = 41 RPM, div = 128) ALARM
fan3: 0 RPM (min = 0 RPM, div = 2)
M/B Temp: +44°C (low = +127°C, high = +80°C) sensor = diode
CPU Temp: +0°C (low = +127°C, high = +126°C) sensor = disabled
Temp3: +0°C (low = +127°C, high = +126°C) sensor = disabled
Abaixo o cpuinfo:
eduardo@eduardo:~$ cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 8
model name : AMD Duron(tm) processor
stepping : 1
cpu MHz : 1800.157
cache size : 64 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow
bogomips : 3601.49
o resultado do sensors-detected:
#----cut here----
# I2C adapter drivers
# modprobe unknown adapter bt878 #0 [sw]
# modprobe unknown adapter NVIDIA I2C Device
# modprobe unknown adapter NVIDIA I2C Device
# modprobe unknown adapter NVIDIA I2C Device
i2c-sis96x
i2c-isa
# I2C chip drivers
eeprom
it87
#----cut here----
também tenho instalado o hddtemp que meu esse resultado:
eduardo@eduardo:~$ sudo hddtemp /dev/hda
/dev/hda: ST380011A: 37°C
Quando vou levantar o modulo do snesor tenho essa resposta:
eduardo@eduardo:~$ sudo modprobe i2c-sensor
FATAL: Module i2c_sensor not found.
Os ouyros modulos (i2c-sis96x, i2c-isa, eeprom, it87) levantam corretamente.
Pq o sensors nao mostra a temperatura da CPU???
Tem como o sensors mostrar também a temperatura do como o hddtemp?
Pela análise do o sensors meu pc tá mto ruim?
valeu
-
Quando tento o
$sudo sensors-detect
Recebo um:
No i2c device files found. Use prog/mkdev/mkdev.sh to create them.
:(
-
Eu também fiquei preocupado agora...
o que viria a ser essa linha:
+3.3V: +6.37 V (min = +3.14 V, max = +3.46 V) ALARM
Parece que não ta certo né?
Esse ALARM, pelo o q eu entendi, são os valores mínimos e máximos configurados. Se em algum momento esses valores forem atingidos. tanto o min. quanto o max. , um o alarme será ativado lhe avisando da situação.
-
Eu tenho instalado aqui o sensors-applet, ele fica na barra do gnome mostrando a temperatura o tempo todo !
(https://ubuntuforum-br.org/proxy.php?request=http%3A%2F%2Fimg204.imageshack.us%2Fimg204%2F1346%2Fscreenshot01gk0.th.jpg&hash=b397be2d1fb14ad45e5691aa6787d29a700f7723) (http://img204.imageshack.us/my.php?image=screenshot01gk0.jpg)
http://sensors-applet.sourceforge.net/index.php?content=packages (http://sensors-applet.sourceforge.net/index.php?content=packages)
-
Realmente o applet ficou legal, coloquei para mostrar a CPU e a M/B, mas como a gente sempre quer mais...faltou a temperatura do hd (hddtemp) procurei alum applet para o hddtemp mas nao consegui, alguem sabe de algum?
-
instalei o lm_sensors aqui
mas deu o seguinte erro
No i2c device files found. Use prog/mkdev/mkdev.sh to create them.
-
executa o mkdev.sh e depois o sensors-detected
tem o forum gringo que me ajudou bastante:
http://ubuntuforums.org/showthread.php?t=2780
-
segui o topico desse forum, ja esta funcionando aqui...
instalei também o sensors-applet
silver@ubuntu:~$ sensors
w83697hf-isa-0290
Adapter: ISA adapter
VCore: +1.58 V (min = +1.71 V, max = +1.89 V) ALARM
+3.3V: +3.36 V (min = +3.14 V, max = +3.47 V)
+5V: +5.08 V (min = +4.76 V, max = +5.24 V)
+12V: +11.86 V (min = +10.82 V, max = +13.19 V)
-12V: -13.02 V (min = -13.18 V, max = -10.80 V)
-5V: -5.05 V (min = -5.25 V, max = -4.75 V)
V5SB: +5.54 V (min = +4.76 V, max = +5.24 V) ALARM
VBat: +3.62 V (min = +2.40 V, max = +3.60 V) ALARM
fan1: 1534 RPM (min = 67500 RPM, div = 4) ALARM
fan2: 3096 RPM (min = -1 RPM, div = 2) ALARM
temp1: +41°C (high = +0°C, hyst = +0°C) sensor = thermistor ALARM
temp2: +47.0°C (high = +80°C, hyst = +75°C) sensor = thermistor
alarms: Chassis intrusion detection ALARM
beep_enable:
Sound alarm enabled
-
Acho que o que interessa é isso aqui:
M/B Temp: +41°C (low = -1°C, high = -1°C) sensor = thermistor
CPU Temp: +63°C (low = +70°C, high = +80°C) sensor = thermistor
A primeira é a temperatura da placa mãe. A segunda a do processador.
Aloha,
M/B é a temperatura da RAM
-
Olha que estranho.. o meu só mostra isso aqui:
rodrigo@rodrigo-desktop:~$ sensors
k8temp-pci-00c3
Adapter: PCI adapter
Core0 Temp:
+37°C
Core1 Temp:
+37°C
rodrigo@rodrigo-desktop:~$
o q é isso e porque nao mostra o resto todo igual os citados no topico?
qdo eu digito sudo sensors-detect aparece:
rodrigo@rodrigo-desktop:~$ sudo sensors-detect
# sensors-detect revision 4171 (2006-09-24 03:37:01 -0700)
This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.
We can start with probing for (PCI) I2C or SMBus adapters.
Do you want to probe now? (YES/no): y
Probing for PCI bus adapters...
Found unknown SMBus adapter 10de:03eb at 0000:00:01.1.
Sorry, no known PCI bus adapters found.
We will now try to load each adapter module in turn.
If you have undetectable or unsupported adapters, you can have them
scanned by manually loading the modules before running this script.
To continue, we need module `i2c-dev' to be loaded.
Do you want to load `i2c-dev' now? (YES/no): y
Module loaded successfully.
We are now going to do the I2C/SMBus adapter probings. Some chips may
be double detected; we choose the one with the highest confidence
value in that case.
If you found that the adapter hung after probing a certain address,
you can specify that address to remain unprobed.
Next adapter: NVIDIA i2c adapter 2 at 0:0d.0
Do you want to scan it? (YES/no/selectively): yes
Next adapter: NVIDIA i2c adapter 1 at 0:0d.0
Do you want to scan it? (YES/no/selectively): yes
Client found at address 0x37
Client found at address 0x50
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... Success!
(confidence 1, driver `eeprom')
Probing for `EDID EEPROM'... Success!
(confidence 8, driver `eeprom'), other addresses: 0x51 0x52 0x53 0x54 0x55 0x56 0x57
Probing for `Maxim MAX6900'... No
Client found at address 0x51
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... Success!
(confidence 1, driver `eeprom')
Client found at address 0x52
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... Success!
(confidence 1, driver `eeprom')
Client found at address 0x53
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... Success!
(confidence 1, driver `eeprom')
Client found at address 0x54
Probing for `SPD EEPROM'... Success!
(confidence 1, driver `eeprom')
Client found at address 0x55
Probing for `SPD EEPROM'... Success!
(confidence 1, driver `eeprom')
Client found at address 0x56
Probing for `SPD EEPROM'... Success!
(confidence 1, driver `eeprom')
Client found at address 0x57
Probing for `SPD EEPROM'... Success!
(confidence 1, driver `eeprom')
Probing for `Sony Vaio EEPROM'... No
Next adapter: NVIDIA i2c adapter 0 at 0:0d.0
Do you want to scan it? (YES/no/selectively): y
Some chips are also accessible through the ISA I/O ports. We have to
write to arbitrary I/O ports to probe them. This is usually safe though.
Yes, you do have ISA I/O ports even if you do not have any ISA slots!
Do you want to scan the ISA I/O ports? (YES/no): y
Probing for `National Semiconductor LM78' at 0x290... No
Probing for `National Semiconductor LM78-J' at 0x290... No
Probing for `National Semiconductor LM79' at 0x290... No
Probing for `Winbond W83781D' at 0x290... No
Probing for `Winbond W83782D' at 0x290... No
Probing for `Winbond W83627HF' at 0x290... No
Probing for `Silicon Integrated Systems SIS5595'... No
Probing for `VIA VT82C686 Integrated Sensors'... No
Probing for `VIA VT8231 Integrated Sensors'... No
Probing for `AMD K8 thermal sensors'... Success!
(confidence 9, driver `k8temp')
Probing for `IPMI BMC KCS' at 0xca0... No
Probing for `IPMI BMC SMIC' at 0xca8... No
Some Super I/O chips may also contain sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no): y
Probing for Super-I/O at 0x2e/0x2f
Trying family `ITE'... Yes
Found unknown chip with ID 0x8726
(logical device 4 has address 0x290, could be sensors)
Trying family `National Semiconductor'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Fintek'... No
Probing for Super-I/O at 0x4e/0x4f
Trying family `ITE'... No
Trying family `National Semiconductor'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Fintek'... No
Now follows a summary of the probes I have just done.
Just press ENTER to continue:
Driver `eeprom' (should be inserted):
Detects correctly:
* Bus `NVIDIA i2c adapter 1 at 0:0d.0'
Busdriver `UNKNOWN', I2C address 0x50 (and 0x51 0x52 0x53 0x54 0x55 0x56 0x57)
Chip `EDID EEPROM' (confidence: 8)
EEPROMs are *NOT* sensors! They are data storage chips commonly
found on memory modules (SPD), in monitors (EDID), or in some
laptops, for example.
Driver `k8temp' (should be inserted):
Detects correctly:
* ISA bus, undetermined address (Busdriver `i2c-isa')
Chip `AMD K8 thermal sensors' (confidence: 9)
I will now generate the commands needed to load the required modules.
Just press ENTER to continue:
To make the sensors modules behave correctly, add these lines to
/etc/modules:
#----cut here----
# I2C adapter drivers
# modprobe unknown adapter NVIDIA i2c adapter 0 at 0:0d.0
# modprobe unknown adapter NVIDIA i2c adapter 1 at 0:0d.0
# modprobe unknown adapter NVIDIA i2c adapter 2 at 0:0d.0
# Chip drivers
eeprom
k8temp
#----cut here----
Do you want to add these lines to /etc/modules automatically? (yes/NO)y
rodrigo@rodrigo-desktop:~$
-
Revivendo o tópico, estou conseguindo ver, atraves do sensors, a maior parte das temperaturas do meu pc, mas a M/B nao aparece. Uso uma mobo DG31PR da intel.
Tentei o mbmon mas aparece uma mensagem:
No Hardware Monitor found!!
InitMBInfo: Success
Pelo jeito essa placa mãe é chatinha de mostrar sua temp, alguem tem alguma ideia?
Aproveito pra deixar as estatisticas do sensors pra ver se está tudo ok =p
w83627dhg-isa-0290
Adapter: ISA adapter
VCore: +1.18 V (min = +0.00 V, max = +1.74 V)
in1: +10.61 V (min = +8.61 V, max = +5.60 V) ALARM
AVCC: +3.38 V (min = +2.43 V, max = +1.89 V) ALARM
3VCC: +3.38 V (min = +0.43 V, max = +0.03 V) ALARM
in4: +1.86 V (min = +0.51 V, max = +1.71 V) ALARM
in5: +1.25 V (min = +0.03 V, max = +1.73 V)
in6: +0.36 V (min = +0.56 V, max = +0.05 V) ALARM
VSB: +3.30 V (min = +2.16 V, max = +2.51 V) ALARM
VBAT: +3.17 V (min = +2.24 V, max = +1.10 V) ALARM
Case Fan: 0 RPM (min = 10546 RPM, div = 128) ALARM
CPU Fan: 969 RPM (min = 998 RPM, div = 8) ALARM
Aux Fan: 0 RPM (min = 10546 RPM, div = 128) ALARM
fan4: 0 RPM (min = 10546 RPM, div = 128) ALARM
fan5: 0 RPM (min = 10546 RPM, div = 128) ALARM
Sys Temp: +54.0°C (high = -93.0°C, hyst = +66.0°C) sensor = diode
CPU Temp: +39.0°C (high = +80.0°C, hyst = +75.0°C) sensor = diode
AUX Temp: +121.5°C (high = +80.0°C, hyst = +75.0°C) ALARM sensor = thermistor
cpu0_vid: +0.000 V
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +31.0°C (crit = +85.0°C)
coretemp-isa-0001
Adapter: ISA adapter
Core 1: +31.0°C (crit = +85.0°C)
VLW