Fórum Ubuntu Linux - PT
Suporte Técnico => Hardware e Periféricos => Tópico iniciado por: rtek1000 em 22 de Maio de 2016, 10:31
-
Olá a todos,
[Solução(*): Parou de desligar no boot, fiz uma instalação limpa do Xubuntu 16.04, formatando com o LiveCD]
(*) Talvez o processo do boot do 16.04 tenha sido melhorado para atuar de forma mais similar ao Windows.
------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------
Ao ligar o notebook, aparece a tela de escolha de boot, e ao inicializar pelo Xubuntu, ele começa a ser carregado e logo se desliga, é como se entrasse em modo de espera, mas ainda nem apareceu a tela da área de trabalho.
Para continuar o boot do Linux eu tenho que pressionar o botão de ligar novamente.
Apesar de estar com o Xubuntu 16.04 (atualizado automaticamente pelo 15.10) este problema já acontecia antes com outras versões do Linux.
No Windows 7/8/10 não acontece isso, o Windows carrega normal.
O Noteboot SIM Positivo 7710 (I5 / 4GB RAM)
Obrigado.
-
Conteúdo de Dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.0-22-generic (buildd@lcy01-04) (gcc version 5.3.1 20160413 (Ubuntu 5.3.1-14ubuntu2) ) #39-Ubuntu SMP Thu May 5 16:52:40 UTC 2016 (Ubuntu 4.4.0-22.39-generic 4.4.8)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009c400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000dffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000a6a7bfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000a6a7c000-0x00000000a6a81fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000a6a82000-0x00000000a6bdbfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000a6bdc000-0x00000000a6c0efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000a6c0f000-0x00000000a6c6dfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000a6c6e000-0x00000000a6ceefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000a6cef000-0x00000000a6f0efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000a6f0f000-0x00000000a6f17fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000a6f18000-0x00000000a6f1efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000a6f1f000-0x00000000a6f7ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000a6f80000-0x00000000a6f9efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000a6f9f000-0x00000000a6fe4fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000a6fe5000-0x00000000a6ffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000a6fff000-0x00000000a6ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000a7000000-0x00000000af9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001cfdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: POSITIVO POSITIVO MOBILE/MB40II4, BIOS 1.03.01.PO 04/11/2011
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x1cfe00 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DBFFF uncachable
[ 0.000000] DC000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 disabled
[ 0.000000] 1 base 100000000 mask F80000000 write-back
[ 0.000000] 2 base 180000000 mask FC0000000 write-back
[ 0.000000] 3 base 1C0000000 mask FF0000000 write-back
[ 0.000000] 4 base 1CFE00000 mask FFFE00000 uncachable
[ 0.000000] 5 base 000000000 mask F80000000 write-back
[ 0.000000] 6 base 080000000 mask FE0000000 write-back
[ 0.000000] 7 base 0A0000000 mask FF8000000 write-back
[ 0.000000] 8 base 0A7000000 mask FFF000000 uncachable
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] original variable MTRRs
[ 0.000000] reg 1, base: 4GB, range: 2GB, type WB
[ 0.000000] reg 2, base: 6GB, range: 1GB, type WB
[ 0.000000] reg 3, base: 7GB, range: 256MB, type WB
[ 0.000000] reg 4, base: 7422MB, range: 2MB, type UC
[ 0.000000] reg 5, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 6, base: 2GB, range: 512MB, type WB
[ 0.000000] reg 7, base: 2560MB, range: 128MB, type WB
[ 0.000000] reg 8, base: 2672MB, range: 16MB, type UC
[ 0.000000] total RAM covered: 5998M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 32M num_reg: 8 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 512MB, type WB
[ 0.000000] reg 2, base: 2560MB, range: 128MB, type WB
[ 0.000000] reg 3, base: 2672MB, range: 16MB, type UC
[ 0.000000] reg 4, base: 4GB, range: 2GB, type WB
[ 0.000000] reg 5, base: 6GB, range: 1GB, type WB
[ 0.000000] reg 6, base: 7GB, range: 256MB, type WB
[ 0.000000] reg 7, base: 7422MB, range: 2MB, type UC
[ 0.000000] e820: update [mem 0xa7000000-0xffffffff] usable ==> reserved
[ 0.000000] found SMP MP-table at [mem 0x000f72c0-0x000f72cf] mapped at [c00f72c0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x021fffff]
[ 0.000000] Base memory trampoline at [c0098000] 98000 size 16384
[ 0.000000] reserving inaccessible SNB gfx pages
[ 0.000000] BRK [0x01d45000, 0x01d45fff] PGTABLE
[ 0.000000] BRK [0x01d46000, 0x01d46fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x33be2000-0x35de8fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F7240 000024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 0x00000000A6FF74E5 000064 (v01 POSITI ABACAXIS 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 0x00000000A6FE7000 0000F4 (v03 INTEL HURONRVR 06040000 PTEC 00000001)
[ 0.000000] ACPI: DSDT 0x00000000A6FE8000 007689 (v02 INTEL SNB-CPT 06040000 INTL 20060912)
[ 0.000000] ACPI: FACS 0x00000000A6F9CFC0 000040
[ 0.000000] ACPI: FACS 0x00000000A6F9CFC0 000040
[ 0.000000] ACPI: HPET 0x00000000A6FFED6A 000038 (v01 INTEL HURONRVR 06040000 PTEC 00000001)
[ 0.000000] ACPI: MCFG 0x00000000A6FFEDA2 00003C (v01 INTEL HURONRVR 06040000 PTEC 00000001)
[ 0.000000] ACPI: APIC 0x00000000A6FFEDDE 000084 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 0x00000000A6FFEE62 000028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SLIC 0x00000000A6FFEE8A 000176 (v01 POSITI ABACAXIS 06040000 LTP 00000000)
[ 0.000000] ACPI: SSDT 0x00000000A6FE6000 000780 (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
[ 0.000000] ACPI: SSDT 0x00000000A6FE5000 000996 (v01 PmRef CpuPm 00003000 INTL 20060912)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 6530MB HIGHMEM available.
[ 0.000000] 891MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37bfe000
[ 0.000000] low ram: 0 - 37bfe000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x0000000037bfdfff]
[ 0.000000] HighMem [mem 0x0000000037bfe000-0x00000001cfdfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009bfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff]
[ 0.000000] node 0: [mem 0x0000000020200000-0x000000003fffffff]
[ 0.000000] node 0: [mem 0x0000000040200000-0x00000000a6a7bfff]
[ 0.000000] node 0: [mem 0x00000000a6a82000-0x00000000a6bdbfff]
[ 0.000000] node 0: [mem 0x00000000a6c0f000-0x00000000a6c6dfff]
[ 0.000000] node 0: [mem 0x00000000a6f0f000-0x00000000a6f17fff]
[ 0.000000] node 0: [mem 0x00000000a6f1f000-0x00000000a6f7ffff]
[ 0.000000] node 0: [mem 0x00000000a6f9f000-0x00000000a6fe4fff]
[ 0.000000] node 0: [mem 0x00000000a6fff000-0x00000000a6ffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x00000001cfdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000001cfdfffff]
[ 0.000000] On node 0 totalpages: 1533569
[ 0.000000] DMA zone: 40 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3995 pages, LIFO batch:0
[ 0.000000] Normal zone: 2190 pages used for memmap
[ 0.000000] Normal zone: 223742 pages, LIFO batch:31
[ 0.000000] HighMem zone: 1305832 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] Reserving Intel graphics stolen memory at 0xa7a00000-0xaf9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dbfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000dc000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000e3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] e820: [mem 0xafa00000-0xe00f7fff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 19 pages/cpu @f187e000 s47436 r0 d30388 u77824
[ 0.000000] pcpu-alloc: s47436 r0 d30388 u77824 alloc=19*4096
[ 0.000000] pcpu-alloc:
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1531339
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-22-generic root=UUID=abe4ac4d-6401-4d4c-94b0-5d299308734a ro
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] microcode: CPU0 microcode updated early to revision 0x29, date = 2013-06-12
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00037bfe:001cfe00)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 6017400K/6134276K available (7847K kernel code, 760K rwdata, 3120K rodata, 944K init, 800K bss, 116876K reserved, 0K cma-reserved, 5223328K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff15000 - 0xfffff000 ( 936 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc1b78000 - 0xc1c64000 ( 944 kB)
.data : 0xc17aa053 - 0xc1b76140 (3888 kB)
.text : 0xc1000000 - 0xc17aa053 (7848 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4
[ 0.000000] NR_IRQS:2304 nr_irqs:456 16
[ 0.000000] CPU 0 irqstacks, hard=f1038000 soft=f103a000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 6815744 bytes of page_ext
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2294.700 MHz processor
[ 0.000037] Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.40 BogoMIPS (lpj=9178800)
[ 0.000046] pid_max: default: 32768 minimum: 301
[ 0.000055] ACPI: Core revision 20150930
[ 0.006468] ACPI: 3 ACPI AML tables successfully acquired and loaded
[ 0.006489] Security Framework initialized
[ 0.006493] Yama: becoming mindful.
[ 0.006512] AppArmor: AppArmor initialized
[ 0.006548] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.006553] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.006736] Initializing cgroup subsys io
[ 0.006742] Initializing cgroup subsys memory
[ 0.006750] Initializing cgroup subsys devices
[ 0.006755] Initializing cgroup subsys freezer
[ 0.006760] Initializing cgroup subsys net_cls
[ 0.006765] Initializing cgroup subsys perf_event
[ 0.006770] Initializing cgroup subsys net_prio
[ 0.006775] Initializing cgroup subsys hugetlb
[ 0.006781] Initializing cgroup subsys pids
[ 0.006806] CPU: Physical Processor ID: 0
[ 0.006810] CPU: Processor Core ID: 0
[ 0.006817] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.006820] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.006826] mce: CPU supports 7 MCE banks
[ 0.006841] CPU0: Thermal monitoring enabled (TM1)
[ 0.006851] process: using mwait in idle threads
[ 0.006859] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.006863] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.007628] Freeing SMP alternatives memory: 28K (c1c64000 - c1c6b000)
[ 0.022359] ftrace: allocating 31186 entries in 61 pages
[ 0.037768] smpboot: Max logical packages: 2
[ 0.037775] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.037781] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.038208] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.077900] TSC deadline timer enabled
[ 0.077904] smpboot: CPU0: Intel(R) Core(TM) i5-2410M CPU @ 2.30GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[ 0.077927] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[ 0.077954] ... version: 3
[ 0.077958] ... bit width: 48
[ 0.077961] ... generic registers: 4
[ 0.077965] ... value mask: 0000ffffffffffff
[ 0.077969] ... max period: 0000ffffffffffff
[ 0.077972] ... fixed-purpose events: 3
[ 0.077976] ... event mask: 000000070000000f
[ 0.078861] CPU 1 irqstacks, hard=f0bfc000 soft=f0bfe000
[ 0.078862] x86: Booting SMP configuration:
[ 0.078867] .... node #0, CPUs: #1
[ 0.079463] microcode: CPU1 microcode updated early to revision 0x29, date = 2013-06-12
[ 0.079464] Initializing CPU#1
[ 0.081608] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.081711] CPU 2 irqstacks, hard=f04bc000 soft=f04be000
[ 0.081712] #2
[ 0.081982] Initializing CPU#2
[ 0.084168] CPU 3 irqstacks, hard=f0530000 soft=f0532000
[ 0.084177] #3
[ 0.084421] Initializing CPU#3
[ 0.086502] x86: Booted up 1 node, 4 CPUs
[ 0.086514] smpboot: Total of 4 processors activated (18357.60 BogoMIPS)
[ 0.090036] devtmpfs: initialized
[ 0.090440] evm: security.selinux
[ 0.090444] evm: security.SMACK64
[ 0.090447] evm: security.SMACK64EXEC
[ 0.090451] evm: security.SMACK64TRANSMUTE
[ 0.090454] evm: security.SMACK64MMAP
[ 0.090457] evm: security.ima
[ 0.090461] evm: security.capability
[ 0.090543] PM: Registering ACPI NVS region [mem 0xa6c6e000-0xa6ceefff] (528384 bytes)
[ 0.090561] PM: Registering ACPI NVS region [mem 0xa6f80000-0xa6f9efff] (126976 bytes)
[ 0.090667] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.090752] pinctrl core: initialized pinctrl subsystem
[ 0.090874] RTC time: 9:55:01, date: 05/22/16
[ 0.090999] NET: Registered protocol family 16
[ 0.091168] EISA bus registered
-
[ 1.003426] ACPI: Battery Slot [BAT0] (battery present)
[ 1.003937] brd: module loaded
[ 1.005960] loop: module loaded
[ 1.006602] libphy: Fixed MDIO Bus: probed
[ 1.007039] tun: Universal TUN/TAP device driver, 1.6
[ 1.007572] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.008275] PPP generic driver version 2.4.2
[ 1.032327] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.056557] ehci-pci: EHCI PCI platform driver
[ 1.080699] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.104664] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.128995] ehci-pci 0000:00:1a.0: debug port 2
[ 1.156841] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.156865] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf0807000
[ 1.188867] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.212629] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.236662] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.260752] usb usb1: Product: EHCI Host Controller
[ 1.284793] usb usb1: Manufacturer: Linux 4.4.0-22-generic ehci_hcd
[ 1.305162] isapnp: No Plug & Play device found
[ 1.333006] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.356902] hub 1-0:1.0: USB hub found
[ 1.380540] hub 1-0:1.0: 3 ports detected
[ 1.404349] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.428214] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.452281] ehci-pci 0000:00:1d.0: debug port 2
[ 1.479851] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.479862] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf0808000
[ 1.512874] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.536292] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.560005] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.583671] usb usb2: Product: EHCI Host Controller
[ 1.606985] usb usb2: Manufacturer: Linux 4.4.0-22-generic ehci_hcd
[ 1.630325] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.653530] hub 2-0:1.0: USB hub found
[ 1.676516] hub 2-0:1.0: 3 ports detected
[ 1.699080] ehci-platform: EHCI generic platform driver
[ 1.712885] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.743539] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.765535] ohci-pci: OHCI PCI platform driver
[ 1.787082] ohci-platform: OHCI generic platform driver
[ 1.808340] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.829653] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.845323] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.845324] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.845608] hub 1-1:1.0: USB hub found
[ 1.845695] hub 1-1:1.0: 6 ports detected
[ 1.864893] tsc: Refined TSC clocksource calibration: 2294.787 MHz
[ 1.864895] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2113f8b171d, max_idle_ns: 440795241185 ns
[ 1.984397] i8042: Detected active multiplexing controller, rev 1.1
[ 2.007895] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.016901] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 2.053019] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 2.075990] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 2.098626] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 2.116904] usb 1-1.2: new high-speed USB device number 3 using ehci-pci
[ 2.143267] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 2.149337] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 2.149339] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.149627] hub 2-1:1.0: USB hub found
[ 2.149714] hub 2-1:1.0: 6 ports detected
[ 2.235963] usb 1-1.2: New USB device found, idVendor=0bda, idProduct=0158
[ 2.235965] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.235966] usb 1-1.2: Product: USB2.0-CRW
[ 2.235967] usb 1-1.2: Manufacturer: Generic
[ 2.235968] usb 1-1.2: SerialNumber: 20071114173400000
[ 2.312912] usb 1-1.4: new full-speed USB device number 4 using ehci-pci
[ 2.389875] mousedev: PS/2 mouse device common for all mice
[ 2.409969] usb 1-1.4: New USB device found, idVendor=067b, idProduct=2303
[ 2.409970] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.409971] usb 1-1.4: Product: USB-Serial Controller D
[ 2.409973] usb 1-1.4: Manufacturer: Prolific Technology Inc.
[ 2.420915] usb 2-1.1: new low-speed USB device number 3 using ehci-pci
[ 2.516975] usb 2-1.1: New USB device found, idVendor=062a, idProduct=0003
[ 2.516977] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.516978] usb 2-1.1: Product: Optical Mouse
[ 2.516979] usb 2-1.1: Manufacturer: MosArt
[ 2.618400] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 2.641405] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 2.664490] i2c /dev entries driver
[ 2.687327] device-mapper: uevent: version 1.0.3
[ 2.710293] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 2.733849] platform eisa.0: Probing EISA bus 0
[ 2.757557] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 2.781520] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 2.805887] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 2.830253] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 2.854203] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 2.877836] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 2.901001] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 2.923579] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 2.923581] clocksource: Switched to clocksource tsc
[ 2.967169] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 2.989043] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 3.010809] platform eisa.0: EISA: Detected 0 cards
[ 3.032324] cpufreq-nforce2: No nForce2 chipset.
[ 3.053346] Intel P-state driver initializing.
[ 3.074111] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.129686] NET: Registered protocol family 10
[ 3.146656] NET: Registered protocol family 17
[ 3.163014] Key type dns_resolver registered
[ 3.179847] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x29
[ 3.197882] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x29
[ 3.214399] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x29
[ 3.231557] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x29
[ 3.247502] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 3.263811] Using IPI No-Shortcut mode
[ 3.280227] registered taskstats version 1
[ 3.296681] Loading compiled-in X.509 certificates
[ 3.315412] Loaded X.509 cert 'Build time autogenerated kernel key: b5980ac4627d9a71ac253ae9ae3449631f214948'
[ 3.332362] zswap: loaded using pool lzo/zbud
[ 3.351007] Key type trusted registered
[ 3.371601] Key type encrypted registered
[ 3.390447] AppArmor: AppArmor sha1 policy hashing enabled
[ 3.409721] ima: No TPM chip found, activating TPM-bypass!
[ 3.428722] evm: HMAC attrs: 0x1
[ 3.447652] Magic number: 0:491:930
[ 3.466225] rtc_cmos 00:01: setting system clock to 2016-05-22 09:55:04 UTC (1463910904)
[ 3.485316] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 3.504530] EDD information not available.
[ 3.523735] PM: Hibernation image not present or could not be loaded.
[ 3.524014] Freeing unused kernel memory: 944K (c1b78000 - c1c64000)
[ 3.543093] Write protecting the kernel text: 7852k
[ 3.562282] Write protecting the kernel read-only data: 3124k
[ 3.581339] NX-protecting the kernel data: 6484k
[ 3.644205] random: systemd-udevd urandom read with 15 bits of entropy available
[ 3.678723] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[ 3.698537] wmi: Mapper loaded
[ 3.717623] [drm] Initialized drm 1.1.0 20060810
[ 3.736513] usbcore: registered new interface driver usb-storage
[ 3.755047] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 3.773311] r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 3.773379] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.810564] ahci 0000:00:1f.2: version 3.0
[ 3.810781] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 3.810981] r8169 0000:04:00.0 eth0: RTL8168e/8111e at 0xf843a000, 44:87:fc:24:04:f3, XID 0c200000 IRQ 24
[ 3.810983] r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 3.843505] r8169 0000:04:00.0 enp4s0: renamed from eth0
[ 3.888686] usbcore: registered new interface driver uas
[ 3.908980] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0xd impl SATA mode
[ 3.929656] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
[ 3.951028] ums-realtek 1-1.2:1.0: USB Mass Storage device detected
[ 3.953135] usbcore: registered new interface driver usbhid
[ 3.953136] usbhid: USB HID core driver
[ 3.977825] scsi host0: ahci
[ 3.977946] scsi host1: ahci
[ 3.978057] scsi host2: ahci
[ 3.978166] scsi host3: ahci
[ 3.978275] scsi host4: ahci
[ 3.978385] scsi host5: ahci
[ 3.978462] ata1: SATA max UDMA/133 abar m2048@0xf0809000 port 0xf0809100 irq 25
[ 3.978463] ata2: DUMMY
[ 3.978466] ata3: SATA max UDMA/133 abar m2048@0xf0809000 port 0xf0809200 irq 25
[ 3.978469] ata4: SATA max UDMA/133 abar m2048@0xf0809000 port 0xf0809280 irq 25
[ 3.978470] ata5: DUMMY
[ 3.978470] ata6: DUMMY
[ 4.176227] input: MosArt Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:062A:0003.0001/input/input13
[ 4.176360] hid-generic 0003:062A:0003.0001: input,hidraw0: USB HID v1.10 Mouse [MosArt Optical Mouse] on usb-0000:00:1d.0-1.1/input0
[ 4.292977] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 4.293513] ata1.00: ATA-9: WDC WD5000LPVX-00V0TT0, 01.01A01, max UDMA/133
[ 4.293515] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), a
[ 4.294057] ata1.00: configured for UDMA/133
[ 4.294168] scsi 0:0:0:0: Direct-Access ATA WDC WD5000LPVX-0 1A01 PQ: 0 ANSI: 5
[ 4.294395] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 4.294397] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 4.294432] sd 0:0:0:0: [sda] Write Protect is off
[ 4.294434] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.294450] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.294619] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.335954] sda: sda1 sda2 sda3 sda4
[ 4.336262] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.573999] psmouse serio4: synaptics: queried max coordinates: x [..5692], y [..4680]
[ 4.616991] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.619377] ata3.00: ATAPI: Slimtype DVD A DS8A4S, JA22, max UDMA/100
[ 4.620726] ata3.00: configured for UDMA/100
[ 4.626165] scsi 2:0:0:0: CD-ROM Slimtype DVD A DS8A4S JA22 PQ: 0 ANSI: 5
[ 4.630154] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000/0x0, board id: 0, fw id: 582762
[ 4.648476] [drm] Memory usable by graphics device = 2048M
[ 4.648478] checking generic (d0000000 300000) vs hw (d0000000 10000000)
[ 4.648478] fb: switching to inteldrmfb from VESA VGA
[ 4.655510] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.655511] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.655636] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 4.655701] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 4.667147] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input12
[ 4.882988] Console: switching to colour dummy device 80x25
[ 4.883072] [drm] Replacing VGA console driver
[ 4.889044] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 4.889048] [drm] Driver supports precise vblank timestamp query.
[ 4.889863] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 4.897181] scsi host6: usb-storage 1-1.2:1.0
[ 4.897270] usbcore: registered new interface driver ums-realtek
[ 4.909294] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 4.909671] ACPI Warning: \_SB_.PCI0.GFX0.DD02._BQC: Return type mismatch - found Reference, expected Integer (20150930/nspredef-290)
[ 4.911854] acpi device:31: registered as cooling_device4
[ 4.911936] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input14
[ 4.912004] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
[ 4.973055] ata4: SATA link down (SStatus 0 SControl 300)
[ 5.022080] usb 1-1.2: USB disconnect, device number 3
[ 5.045760] fbcon: inteldrmfb (fb0) is primary device
[ 5.889149] Console: switching to colour frame buffer device 170x48
[ 5.892278] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 6.805810] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 7.164629] random: nonblocking pool is initialized
[ 7.799694] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 7.799913] systemd[1]: Detected architecture x86.
[ 7.859280] systemd[1]: Set hostname to <pcm>.
-
[ 10.096396] systemd[1]: Listening on Journal Socket (/dev/log).
[ 10.098941] systemd[1]: Reached target User and Group Name Lookups.
[ 10.101424] systemd[1]: Listening on Syslog Socket.
[ 10.103873] systemd[1]: Listening on Journal Socket.
[ 10.106319] systemd[1]: Reached target Remote File Systems (Pre).
[ 10.108837] systemd[1]: Created slice User and Session Slice.
[ 10.111415] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 10.114005] systemd[1]: Created slice System Slice.
[ 10.125499] systemd[1]: Started Read required files in advance.
[ 10.128276] systemd[1]: Reached target Slices.
[ 10.131223] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 10.133921] systemd[1]: Created slice system-getty.slice.
[ 10.237296] systemd[1]: Mounting Debug File System...
[ 10.240441] systemd[1]: Mounting POSIX Message Queue File System...
[ 10.243162] systemd[1]: Listening on Journal Audit Socket.
[ 10.245730] systemd[1]: Reached target Encrypted Volumes.
[ 10.248286] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 10.251251] systemd[1]: Mounting Huge Pages File System...
[ 10.254302] systemd[1]: Starting Uncomplicated firewall...
[ 10.257766] systemd[1]: Started Braille Device Support.
[ 10.301746] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 10.304480] systemd[1]: Reached target Swap.
[ 10.307001] systemd[1]: Listening on udev Kernel Socket.
[ 10.321371] systemd[1]: Starting Journal Service...
[ 10.421406] systemd[1]: Starting Load Kernel Modules...
[ 10.424185] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 10.426836] systemd[1]: Reached target Remote File Systems.
[ 10.429547] systemd[1]: Listening on udev Control Socket.
[ 10.433590] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 10.489398] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 10.501137] systemd[1]: Mounted Huge Pages File System.
[ 10.503833] systemd[1]: Mounted Debug File System.
[ 10.506363] systemd[1]: Mounted POSIX Message Queue File System.
[ 10.624494] systemd[1]: Started Uncomplicated firewall.
[ 10.879308] systemd[1]: Started Journal Service.
[ 10.883113] lp: driver loaded but no devices found
[ 10.917837] ppdev: user-space parallel port driver
[ 14.133540] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 14.409943] systemd-journald[246]: Received request to flush runtime journal from PID 1
[ 14.665179] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20150930/utaddress-254)
[ 14.665185] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 14.665189] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[ 14.665192] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 14.665194] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[ 14.665196] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 14.665197] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[ 14.665200] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 14.665201] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 14.735029] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 15.567328] asus_wmi: Asus Management GUID not found
[ 15.601571] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 15.601577] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 15.601580] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 15.601583] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 15.601585] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 15.601588] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x19
[ 15.601591] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 15.618773] rtl8192ce: rtl8192ce: Power Save off (module option)
[ 15.618776] rtl8192ce: rtl8192ce: FW Power Save off (module option)
[ 15.618783] rtl8192ce: Using firmware rtlwifi/rtl8192cfw.bin
[ 15.637792] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 15.637889] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 15.637983] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 15.664942] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 15.665216] rtlwifi: rtlwifi: wireless switch is on
[ 15.710134] rtl8192ce 0000:02:00.0 wlp2s0: renamed from wlan0
[ 15.753393] intel_rapl: Found RAPL domain package
[ 15.753400] intel_rapl: Found RAPL domain core
[ 15.753402] intel_rapl: Found RAPL domain uncore
[ 16.419621] cfg80211: World regulatory domain updated:
[ 16.419625] cfg80211: DFS Master region: unset
[ 16.419626] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 16.419628] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 16.419630] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 16.419631] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 16.419633] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 16.419634] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 16.419636] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 16.419637] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 16.419638] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 17.277419] usbcore: registered new interface driver usbserial
[ 17.277436] usbcore: registered new interface driver usbserial_generic
[ 17.277450] usbserial: USB Serial support registered for generic
[ 17.297063] usbcore: registered new interface driver pl2303
[ 17.297074] usbserial: USB Serial support registered for pl2303
[ 17.297089] pl2303 1-1.4:1.0: pl2303 converter detected
[ 17.298959] usb 1-1.4: pl2303 converter now attached to ttyUSB0
[ 20.908998] audit: type=1400 audit(1463910921.935:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/ubuntu-core-launcher" pid=611 comm="apparmor_parser"
[ 20.964358] audit: type=1400 audit(1463910921.991:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=612 comm="apparmor_parser"
[ 20.965574] audit: type=1400 audit(1463910921.991:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=608 comm="apparmor_parser"
[ 20.965582] audit: type=1400 audit(1463910921.991:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=608 comm="apparmor_parser"
[ 20.965586] audit: type=1400 audit(1463910921.991:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=608 comm="apparmor_parser"
[ 20.965591] audit: type=1400 audit(1463910921.991:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=608 comm="apparmor_parser"
[ 21.007188] audit: type=1400 audit(1463910922.035:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=607 comm="apparmor_parser"
[ 21.007199] audit: type=1400 audit(1463910922.035:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=607 comm="apparmor_parser"
[ 21.012340] audit: type=1400 audit(1463910922.039:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=609 comm="apparmor_parser"
[ 21.012348] audit: type=1400 audit(1463910922.039:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=609 comm="apparmor_parser"
[ 26.776879] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 26.815592] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[ 27.014105] r8169 0000:04:00.0 enp4s0: link down
[ 27.014175] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[ 33.942931] PM: Syncing filesystems ... done.
[ 34.774946] PM: Preparing system for sleep (mem)
[ 34.775058] Freezing user space processes ... (elapsed 0.039 seconds) done.
[ 34.814799] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 34.816008] PM: Suspending system (mem)
[ 34.816041] Suspending console(s) (use no_console_suspend to debug)
[ 34.816217] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 34.936978] sd 0:0:0:0: [sda] Stopping disk
[ 35.530343] PM: suspend of devices complete after 714.171 msecs
[ 35.546180] PM: late suspend of devices complete after 15.833 msecs
[ 35.546886] r8169 0000:04:00.0: System wakeup enabled by ACPI
[ 35.547015] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 35.547061] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[ 35.562327] PM: noirq suspend of devices complete after 16.142 msecs
[ 35.562533] ACPI: Preparing to enter system sleep state S3
[ 35.594203] ACPI : EC: EC stopped
[ 35.594204] PM: Saving platform NVS memory
[ 35.594574] Disabling non-boot CPUs ...
[ 35.594758] Broke affinity for irq 25
[ 35.595778] smpboot: CPU 1 is now offline
[ 35.610666] Broke affinity for irq 25
[ 35.611679] smpboot: CPU 2 is now offline
[ 35.622601] Broke affinity for irq 1
[ 35.622608] Broke affinity for irq 9
[ 35.622611] Broke affinity for irq 12
[ 35.622620] Broke affinity for irq 25
[ 35.622621] Broke affinity for irq 26
[ 35.623632] smpboot: CPU 3 is now offline
[ 35.635472] ACPI: Low-level resume complete
[ 35.635511] ACPI : EC: EC started
[ 35.635511] PM: Restoring platform NVS memory
[ 35.636552] microcode: CPU0 microcode updated early to revision 0x29, date = 2013-06-12
[ 35.636573] Enabling non-boot CPUs ...
[ 35.655870] x86: Booting SMP configuration:
[ 35.655871] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 35.656464] microcode: CPU1 microcode updated early to revision 0x29, date = 2013-06-12
[ 35.656465] Initializing CPU#1
[ 35.658708] cache: parent cpu1 should not be sleeping
[ 35.658908] CPU1 is up
[ 35.675909] smpboot: Booting Node 0 Processor 2 APIC 0x1
[ 35.676153] Initializing CPU#2
[ 35.678417] cache: parent cpu2 should not be sleeping
[ 35.678622] CPU2 is up
[ 35.695956] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 35.696200] Initializing CPU#3
[ 35.698482] cache: parent cpu3 should not be sleeping
[ 35.698679] CPU3 is up
[ 35.702827] ACPI: Waking up from system sleep state S3
[ 36.735962] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 36.736508] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 36.736607] PM: noirq resume of devices complete after 16.744 msecs
[ 36.736807] PM: early resume of devices complete after 0.189 msecs
[ 36.737020] rtlwifi: rtlwifi: wireless switch is on
[ 36.737035] r8169 0000:04:00.0: System wakeup disabled by ACPI
[ 36.738908] sd 0:0:0:0: [sda] Starting disk
[ 36.744076] rtc_cmos 00:01: System wakeup disabled by ACPI
[ 36.876052] r8169 0000:04:00.0 enp4s0: link down
[ 36.911984] PM: resume of devices complete after 175.154 msecs
[ 36.919918] PM: Finishing wakeup.
[ 36.919920] Restarting tasks ... done.
[ 36.999766] usb 1-1.2: new high-speed USB device number 5 using ehci-pci
[ 37.017867] video LNXVIDEO:00: Restoring backlight state
[ 37.063778] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 37.065751] ata3.00: configured for UDMA/100
[ 37.071772] ata4: SATA link down (SStatus 0 SControl 300)
[ 37.191775] usb 2-1.4: new full-speed USB device number 4 using ehci-pci
[ 37.344329] usb 1-1.2: New USB device found, idVendor=0bda, idProduct=0158
[ 37.344340] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 37.344346] usb 1-1.2: Product: USB2.0-CRW
[ 37.344361] usb 1-1.2: Manufacturer: Generic
[ 37.344363] usb 1-1.2: SerialNumber: 20071114173400000
[ 37.349387] ums-realtek 1-1.2:1.0: USB Mass Storage device detected
[ 37.363790] scsi host7: usb-storage 1-1.2:1.0
[ 37.455769] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 37.507387] usb 1-1.2: USB disconnect, device number 5
[ 37.561421] ata1.00: configured for UDMA/133
[ 37.638857] psmouse serio4: synaptics: queried max coordinates: x [..5692], y [..4680]
[ 37.733848] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 37.734506] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[ 37.875977] r8169 0000:04:00.0 enp4s0: link down
[ 37.876064] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
-
[ 122.173637] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 122.232379] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 123.137102] wlp2s0: authenticate with fc:b0:c4:07:03:7e
[ 123.147355] wlp2s0: send auth to fc:b0:c4:07:03:7e (try 1/3)
[ 123.148943] wlp2s0: authenticated
[ 123.151694] wlp2s0: associate with fc:b0:c4:07:03:7e (try 1/3)
[ 123.155507] wlp2s0: RX AssocResp from fc:b0:c4:07:03:7e (capab=0xc31 status=0 aid=3)
[ 123.156025] wlp2s0: associated
[ 123.156069] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 920.490327] libcrc32c: module verification failed: signature and/or required key missing - tainting kernel
[ 920.530645] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[ 920.539226] JFS: nTxBlock = 8192, nTxLock = 65536
[ 920.551177] ntfs: driver 2.1.32 [Flags: R/O MODULE].
[ 920.566957] QNX4 filesystem 0.2.3 registered.
[ 920.640109] raid6: mmxx1 gen() 4480 MB/s
[ 920.708114] raid6: mmxx2 gen() 4967 MB/s
[ 920.776111] raid6: sse1x1 gen() 4003 MB/s
[ 920.844113] raid6: sse1x2 gen() 4634 MB/s
[ 920.912128] raid6: sse2x1 gen() 7564 MB/s
[ 920.980124] raid6: sse2x1 xor() 5949 MB/s
[ 921.048130] raid6: sse2x2 gen() 9669 MB/s
[ 921.116128] raid6: sse2x2 xor() 6780 MB/s
[ 921.116131] raid6: using algorithm sse2x2 gen() 9669 MB/s
[ 921.116133] raid6: .... xor() 6780 MB/s, rmw enabled
[ 921.116134] raid6: using ssse3x1 recovery algorithm
[ 921.116967] xor: automatically using best checksumming function:
[ 921.156130] avx : 21335.000 MB/sec
[ 921.182170] Btrfs loaded
-
Parece que a questão está retratada nesse ponto do dmesg:
[ 34.774946] PM: Preparing system for sleep (mem)
[ 34.775058] Freezing user space processes ... (elapsed 0.039 seconds) done.
[ 34.814799] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 34.816008] PM: Suspending system (mem)
1) Evidentemente devemos supor que o sistema está devidamente atualizado?
sudo apt update && sudo apt upgrade
2) Suponho que até possa resolver parcialmente o problema desligando ACPI, mas é uma solução feia, talvez seja possível algo melhor.
Em todo caso experimente para termos uma avaliação preliminar.
GRUB_CMDLINE_LINUX="acpi=off"
Nem precisa alterar no /etc/default/grub, o que tornaria a alteração definitiva, testa acrescentando apenas na cmdline, isto é, na linha de boot do menu inicial do grub, vez que a alteração ali é provisória, só fazer para aquele boot, não grava nada, então depois ao reiniciar automaticamente volta ao normal.
Exemplificando, fica mais ou menos assim:
BOOT_IMAGE=/boot/vmlinuz-3.13.0-32-generic root=UUID=f4f14b99-4e2c-4229-86f9-1143d367f9c3 ro quiet splash acpi=off
Desligar ACPI é muito ruim, geralmente traz problemas para desligar o computador e outras coisas mais, compensa estudar o caso e procurar outras soluções.
3) Se fizer o boot usando o upstart também acontece a mesma coisa ou não?
4) Não entendi muito bem, da segunda vez que aperta o botão de ligar aí ele vai sem problemas, sobe o sistema normalmente?
-
Olá,
Eu tentei desligar o ACPI, mas não dava boot, então tive que voltar ao normal.
Acontece que tentei atualizar o driver da placa de wifi, e acabei por instalar o driver da RTL8188CU em vez de RTL8188CE, e com isso não consegui mais reverter a situação do driver.
Já irritado, resolvi baixar a ISO do Xubuntu 16.04 para formatar, já que o 15.10 tinha se atualizado para o 16.04.
Acontece que agora parou de desligar no boot.
Vou deixar o dmesg do novo sistema, caso alguém se interesse em descobrir o que era.
Eu testei o Debian Live Standard 8, e logo depois que fiz o login (user live) o note desligou.
Notei que o boot do Debian foi bem mais rápido que o Xubuntu, pois é Standard, sem adicionais, então acho que faz um certo sentido de que o tempo para dormir seja o mesmo tanto no Xubuntu, como foi no Debian.
Com isso acredito que seja realmente coisa da BIOS, o timer APM deve estar configurado para 30 ou 60 segundos (sei lá) acontece que ao entrar no SETUP (BIOS) não tem opção nenhuma de ACPI/APM.
E como o Windows não desliga?? (Acho que ele faz um reset do timer durante o boot, sei lá)
Mas como esse 16.04 não apresenta mais isso de desligar no boot, não sei se vou ficar procurando pelo em ovo.
Agradeço a ajuda e se caso voltar a dar isso, posto novamente.
Novo dmesg Xubuntu 16.04:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.0-21-generic (buildd@lgw01-06) (gcc version 5.3.1 20160413 (Ubuntu 5.3.1-14ubuntu2) ) #37-Ubuntu SMP Mon Apr 18 18:34:49 UTC 2016 (Ubuntu 4.4.0-21.37-generic 4.4.6)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009c400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000dffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000a6a7bfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000a6a7c000-0x00000000a6a81fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000a6a82000-0x00000000a6bdbfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000a6bdc000-0x00000000a6c0efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000a6c0f000-0x00000000a6c6dfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000a6c6e000-0x00000000a6ceefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000a6cef000-0x00000000a6f0efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000a6f0f000-0x00000000a6f17fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000a6f18000-0x00000000a6f1efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000a6f1f000-0x00000000a6f7ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000a6f80000-0x00000000a6f9efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000a6f9f000-0x00000000a6fe4fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000a6fe5000-0x00000000a6ffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000a6fff000-0x00000000a6ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000a7000000-0x00000000af9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001cfdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: POSITIVO POSITIVO MOBILE/MB40II4, BIOS 1.03.01.PO 04/11/2011
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x1cfe00 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DBFFF uncachable
[ 0.000000] DC000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 disabled
[ 0.000000] 1 base 100000000 mask F80000000 write-back
[ 0.000000] 2 base 180000000 mask FC0000000 write-back
[ 0.000000] 3 base 1C0000000 mask FF0000000 write-back
[ 0.000000] 4 base 1CFE00000 mask FFFE00000 uncachable
[ 0.000000] 5 base 000000000 mask F80000000 write-back
[ 0.000000] 6 base 080000000 mask FE0000000 write-back
[ 0.000000] 7 base 0A0000000 mask FF8000000 write-back
[ 0.000000] 8 base 0A7000000 mask FFF000000 uncachable
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] original variable MTRRs
[ 0.000000] reg 1, base: 4GB, range: 2GB, type WB
[ 0.000000] reg 2, base: 6GB, range: 1GB, type WB
[ 0.000000] reg 3, base: 7GB, range: 256MB, type WB
[ 0.000000] reg 4, base: 7422MB, range: 2MB, type UC
[ 0.000000] reg 5, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 6, base: 2GB, range: 512MB, type WB
[ 0.000000] reg 7, base: 2560MB, range: 128MB, type WB
[ 0.000000] reg 8, base: 2672MB, range: 16MB, type UC
[ 0.000000] total RAM covered: 5998M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 32M num_reg: 8 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 512MB, type WB
[ 0.000000] reg 2, base: 2560MB, range: 128MB, type WB
[ 0.000000] reg 3, base: 2672MB, range: 16MB, type UC
[ 0.000000] reg 4, base: 4GB, range: 2GB, type WB
[ 0.000000] reg 5, base: 6GB, range: 1GB, type WB
[ 0.000000] reg 6, base: 7GB, range: 256MB, type WB
[ 0.000000] reg 7, base: 7422MB, range: 2MB, type UC
[ 0.000000] e820: update [mem 0xa7000000-0xffffffff] usable ==> reserved
[ 0.000000] found SMP MP-table at [mem 0x000f72c0-0x000f72cf] mapped at [c00f72c0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x021fffff]
[ 0.000000] Base memory trampoline at [c0098000] 98000 size 16384
[ 0.000000] reserving inaccessible SNB gfx pages
[ 0.000000] BRK [0x01d41000, 0x01d41fff] PGTABLE
[ 0.000000] BRK [0x01d42000, 0x01d42fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x33c56000-0x35e22fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F7240 000024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 0x00000000A6FF74E5 000064 (v01 POSITI ABACAXIS 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 0x00000000A6FE7000 0000F4 (v03 INTEL HURONRVR 06040000 PTEC 00000001)
[ 0.000000] ACPI: DSDT 0x00000000A6FE8000 007689 (v02 INTEL SNB-CPT 06040000 INTL 20060912)
[ 0.000000] ACPI: FACS 0x00000000A6F9CFC0 000040
[ 0.000000] ACPI: FACS 0x00000000A6F9CFC0 000040
[ 0.000000] ACPI: HPET 0x00000000A6FFED6A 000038 (v01 INTEL HURONRVR 06040000 PTEC 00000001)
[ 0.000000] ACPI: MCFG 0x00000000A6FFEDA2 00003C (v01 INTEL HURONRVR 06040000 PTEC 00000001)
[ 0.000000] ACPI: APIC 0x00000000A6FFEDDE 000084 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 0x00000000A6FFEE62 000028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SLIC 0x00000000A6FFEE8A 000176 (v01 POSITI ABACAXIS 06040000 LTP 00000000)
[ 0.000000] ACPI: SSDT 0x00000000A6FE6000 000780 (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
[ 0.000000] ACPI: SSDT 0x00000000A6FE5000 000996 (v01 PmRef CpuPm 00003000 INTL 20060912)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 6530MB HIGHMEM available.
[ 0.000000] 891MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37bfe000
[ 0.000000] low ram: 0 - 37bfe000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x0000000037bfdfff]
[ 0.000000] HighMem [mem 0x0000000037bfe000-0x00000001cfdfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009bfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff]
[ 0.000000] node 0: [mem 0x0000000020200000-0x000000003fffffff]
[ 0.000000] node 0: [mem 0x0000000040200000-0x00000000a6a7bfff]
[ 0.000000] node 0: [mem 0x00000000a6a82000-0x00000000a6bdbfff]
[ 0.000000] node 0: [mem 0x00000000a6c0f000-0x00000000a6c6dfff]
[ 0.000000] node 0: [mem 0x00000000a6f0f000-0x00000000a6f17fff]
[ 0.000000] node 0: [mem 0x00000000a6f1f000-0x00000000a6f7ffff]
[ 0.000000] node 0: [mem 0x00000000a6f9f000-0x00000000a6fe4fff]
[ 0.000000] node 0: [mem 0x00000000a6fff000-0x00000000a6ffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x00000001cfdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000001cfdfffff]
[ 0.000000] On node 0 totalpages: 1533569
[ 0.000000] DMA zone: 40 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3995 pages, LIFO batch:0
[ 0.000000] Normal zone: 2190 pages used for memmap
[ 0.000000] Normal zone: 223742 pages, LIFO batch:31
[ 0.000000] HighMem zone: 1305832 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] Reserving Intel graphics stolen memory at 0xa7a00000-0xaf9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dbfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000dc000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000e3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] e820: [mem 0xafa00000-0xe00f7fff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 19 pages/cpu @f628b000 s47436 r0 d30388 u77824
[ 0.000000] pcpu-alloc: s47436 r0 d30388 u77824 alloc=19*4096
[ 0.000000] pcpu-alloc:
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1531339
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-21-generic root=UUID=150d1866-61f1-426b-936f-56410c30e931 ro locale=pt_BR
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00037bfe:001cfe00)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 6017648K/6134276K available (7842K kernel code, 759K rwdata, 3116K rodata, 940K init, 800K bss, 116628K reserved, 0K cma-reserved, 5223328K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff15000 - 0xfffff000 ( 936 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc1b75000 - 0xc1c60000 ( 940 kB)
.data : 0xc17a8ed3 - 0xc1b73f80 (3884 kB)
.text : 0xc1000000 - 0xc17a8ed3 (7843 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4
[ 0.000000] NR_IRQS:2304 nr_irqs:456 16
[ 0.000000] CPU 0 irqstacks, hard=f1038000 soft=f103a000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 6815744 bytes of page_ext
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2294.531 MHz processor
[ 0.000037] Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.06 BogoMIPS (lpj=9178124)
[ 0.000046] pid_max: default: 32768 minimum: 301
[ 0.000055] ACPI: Core revision 20150930
[ 0.006472] ACPI: 3 ACPI AML tables successfully acquired and loaded
[ 0.006492] Security Framework initialized
[ 0.006497] Yama: becoming mindful.
[ 0.006516] AppArmor: AppArmor initialized
[ 0.006553] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.006558] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.006741] Initializing cgroup subsys io
[ 0.006747] Initializing cgroup subsys memory
[ 0.006755] Initializing cgroup subsys devices
[ 0.006760] Initializing cgroup subsys freezer
[ 0.006765] Initializing cgroup subsys net_cls
[ 0.006770] Initializing cgroup subsys perf_event
[ 0.006775] Initializing cgroup subsys net_prio
[ 0.006780] Initializing cgroup subsys hugetlb
[ 0.006786] Initializing cgroup subsys pids
[ 0.006811] CPU: Physical Processor ID: 0
[ 0.006815] CPU: Processor Core ID: 0
[ 0.006822] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.006826] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.006831] mce: CPU supports 7 MCE banks
[ 0.006846] CPU0: Thermal monitoring enabled (TM1)
[ 0.006855] process: using mwait in idle threads
[ 0.006863] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.006867] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.007632] Freeing SMP alternatives memory: 28K (c1c60000 - c1c67000)
[ 0.022125] ftrace: allocating 31158 entries in 61 pages
[ 0.037636] smpboot: Max logical packages: 2
[ 0.037644] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.037649] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.038074] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.077765] TSC deadline timer enabled
[ 0.077769] smpboot: CPU0: Intel(R) Core(TM) i5-2410M CPU @ 2.30GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[ 0.077791] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[ 0.077817] core: PEBS disabled due to CPU errata, please upgrade microcode
[ 0.077822] ... version: 3
[ 0.077825] ... bit width: 48
[ 0.077828] ... generic registers: 4
[ 0.077832] ... value mask: 0000ffffffffffff
[ 0.077836] ... max period: 0000ffffffffffff
[ 0.077839] ... fixed-purpose events: 3
[ 0.077843] ... event mask: 000000070000000f
[ 0.078718] CPU 1 irqstacks, hard=f0bfc000 soft=f0bfe000
[ 0.078720] x86: Booting SMP configuration:
[ 0.078724] .... node #0, CPUs: #1
[ 0.078970] Initializing CPU#1
[ 0.081114] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.081207] CPU 2 irqstacks, hard=f04bc000 soft=f04be000
[ 0.081209] #2
[ 0.081568] Initializing CPU#2
[ 0.083753] CPU 3 irqstacks, hard=f0530000 soft=f0532000
[ 0.083762] #3
[ 0.084104] Initializing CPU#3
[ 0.086185] x86: Booted up 1 node, 4 CPUs
[ 0.086196] smpboot: Total of 4 processors activated (18356.24 BogoMIPS)
[ 0.089699] devtmpfs: initialized
[ 0.090109] evm: security.selinux
[ 0.090113] evm: security.SMACK64
[ 0.090116] evm: security.SMACK64EXEC
[ 0.090119] evm: security.SMACK64TRANSMUTE
[ 0.090123] evm: security.SMACK64MMAP
[ 0.090126] evm: security.ima
[ 0.090129] evm: security.capability
[ 0.090213] PM: Registering ACPI NVS region [mem 0xa6c6e000-0xa6ceefff] (528384 bytes)
[ 0.090230] PM: Registering ACPI NVS region [mem 0xa6f80000-0xa6f9efff] (126976 bytes)
[ 0.090334] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.090418] pinctrl core: initialized pinctrl subsystem
[ 0.090538] RTC time: 19:56:52, date: 05/25/16
[ 0.090661] NET: Registered protocol family 16
[ 0.090851] EISA bus registered
-
[ 0.101532] cpuidle: using governor ladder
[ 0.113523] cpuidle: using governor menu
[ 0.113541] PCCT header not found.
[ 0.113665] Simple Boot Flag at 0x36 set to 0x1
[ 0.113711] ACPI: bus type PCI registered
[ 0.113717] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.113803] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.113811] PCI: not using MMCONFIG
[ 0.122180] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
[ 0.122292] PCI: PCI BIOS revision 3.00 entry at 0xfdd92, last bus=5
[ 0.122296] PCI: Using configuration type 1 for base access
[ 0.122350] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.130283] ACPI: Added _OSI(Module Device)
[ 0.130288] ACPI: Added _OSI(Processor Device)
[ 0.130292] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.130296] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.132542] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.135230] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.135599] ACPI: Dynamic OEM Table Load:
[ 0.135608] ACPI: SSDT 0x00000000F05D0800 00065F (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
[ 0.136147] ACPI: Dynamic OEM Table Load:
[ 0.136155] ACPI: SSDT 0x00000000F0401C00 000303 (v01 PmRef ApIst 00003000 INTL 20060912)
[ 0.136607] ACPI: Dynamic OEM Table Load:
[ 0.136613] ACPI: SSDT 0x00000000F05ABA00 000119 (v01 PmRef ApCst 00003000 INTL 20060912)
[ 0.137447] ACPI : EC: EC started
[ 0.143254] ACPI: Interpreter enabled
[ 0.143271] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
[ 0.143290] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.143294] ACPI: Using IOAPIC for interrupt routing
[ 0.143324] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.143659] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.143666] PCI: Using MMCONFIG for extended config space
[ 0.143674] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.149450] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.149459] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.149501] \_SB_.PCI0:_OSC invalid UUID
[ 0.149502] _OSC request data:1 1f 0
[ 0.149506] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.149942] PCI host bridge to bus 0000:00
[ 0.149948] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.149952] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.149957] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.149964] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.149970] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.149977] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.149983] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.149990] pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfeafffff window]
[ 0.149996] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.150007] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[ 0.150107] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[ 0.150121] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
[ 0.150128] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.150133] pci 0000:00:02.0: reg 0x20: [io 0x1800-0x183f]
[ 0.150246] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.150280] pci 0000:00:16.0: reg 0x10: [mem 0xf0804000-0xf080400f 64bit]
[ 0.150349] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.150443] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.150474] pci 0000:00:1a.0: reg 0x10: [mem 0xf0807000-0xf08073ff]
[ 0.150550] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.150610] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.150664] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.150694] pci 0000:00:1b.0: reg 0x10: [mem 0xf0800000-0xf0803fff 64bit]
[ 0.150760] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.150808] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.150857] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.150938] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.150985] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.151036] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[ 0.151115] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.151162] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.151218] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.151248] pci 0000:00:1d.0: reg 0x10: [mem 0xf0808000-0xf08083ff]
[ 0.151325] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.151382] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.151434] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[ 0.151616] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[ 0.151641] pci 0000:00:1f.2: reg 0x10: [io 0x18a0-0x18a7]
[ 0.151649] pci 0000:00:1f.2: reg 0x14: [io 0x1874-0x1877]
[ 0.151658] pci 0000:00:1f.2: reg 0x18: [io 0x1878-0x187f]
[ 0.151666] pci 0000:00:1f.2: reg 0x1c: [io 0x1870-0x1873]
[ 0.151675] pci 0000:00:1f.2: reg 0x20: [io 0x1880-0x189f]
[ 0.151683] pci 0000:00:1f.2: reg 0x24: [mem 0xf0809000-0xf08097ff]
[ 0.151718] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.151800] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.151818] pci 0000:00:1f.3: reg 0x10: [mem 0xf080a000-0xf080a0ff 64bit]
[ 0.151840] pci 0000:00:1f.3: reg 0x20: [io 0x18c0-0x18df]
[ 0.151938] pci 0000:00:1f.6: [8086:1c24] type 00 class 0x118000
[ 0.151966] pci 0000:00:1f.6: reg 0x10: [mem 0xf080b000-0xf080bfff 64bit]
[ 0.152186] pci 0000:02:00.0: [10ec:8176] type 00 class 0x028000
[ 0.152250] pci 0000:02:00.0: reg 0x10: [io 0x2000-0x20ff]
[ 0.152300] pci 0000:02:00.0: reg 0x18: [mem 0xf0500000-0xf0503fff 64bit]
[ 0.152453] pci 0000:02:00.0: supports D1 D2
[ 0.152454] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.152514] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.157908] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[ 0.157929] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.157949] pci 0000:00:1c.0: bridge window [mem 0xf0500000-0xf05fffff]
[ 0.157956] pci 0000:00:1c.0: bridge window [mem 0xf0c00000-0xf0dfffff 64bit pref]
[ 0.158090] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
[ 0.158259] pci 0000:04:00.0: reg 0x10: [io 0x3000-0x30ff]
[ 0.158382] pci 0000:04:00.0: reg 0x18: [mem 0xf0900000-0xf0900fff 64bit pref]
[ 0.158457] pci 0000:04:00.0: reg 0x20: [mem 0xf0a04000-0xf0a07fff 64bit pref]
[ 0.158750] pci 0000:04:00.0: supports D1 D2
[ 0.158752] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.158895] pci 0000:04:00.0: System wakeup disabled by ACPI
[ 0.165925] pci 0000:00:1c.1: PCI bridge to [bus 04-05]
[ 0.165954] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.165959] pci 0000:00:1c.1: bridge window [mem 0xf0400000-0xf04fffff]
[ 0.165965] pci 0000:00:1c.1: bridge window [mem 0xf0900000-0xf0bfffff 64bit pref]
[ 0.165981] pci_bus 0000:00: on NUMA node 0
[ 0.166727] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.166791] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.166852] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 10 11 12 14 15)
[ 0.166912] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.166972] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.167034] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.167094] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 0.167156] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.167345] ACPI: Enabled 6 GPEs in block 00 to 3F
[ 0.167385] ACPI : EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.167506] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.167512] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.167519] vgaarb: loaded
[ 0.167523] vgaarb: bridge control possible 0000:00:02.0
[ 0.167812] SCSI subsystem initialized
[ 0.167858] libata version 3.00 loaded.
[ 0.167886] ACPI: bus type USB registered
[ 0.167907] usbcore: registered new interface driver usbfs
[ 0.167920] usbcore: registered new interface driver hub
[ 0.167941] usbcore: registered new device driver usb
[ 0.168104] PCI: Using ACPI for IRQ routing
[ 0.168426] PCI: pci_cache_line_size set to 64 bytes
[ 0.168487] e820: reserve RAM buffer [mem 0x0009c400-0x0009ffff]
[ 0.168490] e820: reserve RAM buffer [mem 0xa6a7c000-0xa7ffffff]
[ 0.168493] e820: reserve RAM buffer [mem 0xa6bdc000-0xa7ffffff]
[ 0.168495] e820: reserve RAM buffer [mem 0xa6c6e000-0xa7ffffff]
[ 0.168498] e820: reserve RAM buffer [mem 0xa6f18000-0xa7ffffff]
[ 0.168500] e820: reserve RAM buffer [mem 0xa6f80000-0xa7ffffff]
[ 0.168501] e820: reserve RAM buffer [mem 0xa6fe5000-0xa7ffffff]
[ 0.168503] e820: reserve RAM buffer [mem 0xa7000000-0xa7ffffff]
[ 0.168505] e820: reserve RAM buffer [mem 0x1cfe00000-0x1cfffffff]
[ 0.168639] NetLabel: Initializing
[ 0.168643] NetLabel: domain hash size = 128
[ 0.168646] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.168659] NetLabel: unlabeled traffic allowed by default
[ 0.168763] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.168772] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.170806] clocksource: Switched to clocksource hpet
[ 0.178463] AppArmor: AppArmor Filesystem Enabled
[ 0.178543] pnp: PnP ACPI init
[ 0.179097] system 00:00: [io 0x0200-0x020f] has been reserved
[ 0.179103] system 00:00: [io 0x0260-0x026f] has been reserved
[ 0.179107] system 00:00: [io 0x0300-0x030f] has been reserved
[ 0.179112] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.179117] system 00:00: [io 0x0700-0x070f] has been reserved
[ 0.179122] system 00:00: [io 0xffff] has been reserved
[ 0.179126] system 00:00: [io 0xffff] has been reserved
[ 0.179131] system 00:00: [io 0x0400-0x0453] could not be reserved
[ 0.179136] system 00:00: [io 0x0458-0x047f] has been reserved
[ 0.179140] system 00:00: [io 0x0500-0x057f] has been reserved
[ 0.179145] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.179152] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.179184] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.179240] system 00:02: [io 0x0454-0x0457] has been reserved
[ 0.179247] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.179297] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.179347] pnp 00:04: Plug and Play ACPI device, IDs SYN0e0f SYN0e00 SYN0002 PNP0f13 (active)
[ 0.179474] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.179480] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.179485] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.179490] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.179495] system 00:05: [mem 0xe0000000-0xefffffff] could not be reserved
[ 0.179500] system 00:05: [mem 0xfeaff000-0xfeafffff] has been reserved
[ 0.179505] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.179509] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.179514] system 00:05: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.179519] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.179524] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 0.179529] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.179535] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.179703] pnp: PnP ACPI: found 6 devices
[ 0.179712] PnPBIOS: Disabled by ACPI PNP
[ 0.216424] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.216456] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[ 0.216463] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.216472] pci 0000:00:1c.0: bridge window [mem 0xf0500000-0xf05fffff]
[ 0.216480] pci 0000:00:1c.0: bridge window [mem 0xf0c00000-0xf0dfffff 64bit pref]
[ 0.216491] pci 0000:00:1c.1: PCI bridge to [bus 04-05]
[ 0.216497] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.216506] pci 0000:00:1c.1: bridge window [mem 0xf0400000-0xf04fffff]
[ 0.216513] pci 0000:00:1c.1: bridge window [mem 0xf0900000-0xf0bfffff 64bit pref]
[ 0.216525] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.216527] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.216529] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.216531] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.216533] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.216534] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.216536] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000e3fff window]
[ 0.216538] pci_bus 0000:00: resource 11 [mem 0xafa00000-0xfeafffff window]
[ 0.216540] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.216542] pci_bus 0000:02: resource 1 [mem 0xf0500000-0xf05fffff]
[ 0.216544] pci_bus 0000:02: resource 2 [mem 0xf0c00000-0xf0dfffff 64bit pref]
[ 0.216545] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
[ 0.216547] pci_bus 0000:04: resource 1 [mem 0xf0400000-0xf04fffff]
[ 0.216549] pci_bus 0000:04: resource 2 [mem 0xf0900000-0xf0bfffff 64bit pref]
[ 0.216582] NET: Registered protocol family 2
[ 0.216729] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.216743] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.216760] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.216774] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.216781] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.216822] NET: Registered protocol family 1
[ 0.216837] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.216923] PCI: CLS 64 bytes, default 64
[ 0.216971] Trying to unpack rootfs image as initramfs...
[ 0.857897] Freeing initrd memory: 34612K (f3c56000 - f5e23000)
[ 0.858008] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[ 0.858015] hw unit of domain pp0-core 2^-16 Joules
[ 0.858019] hw unit of domain package 2^-16 Joules
[ 0.858022] hw unit of domain pp1-gpu 2^-16 Joules
[ 0.858128] Scanning for low memory corruption every 60 seconds
[ 0.858531] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.858559] audit: initializing netlink subsys (disabled)
[ 0.858576] audit: type=2000 audit(1464206211.844:1): initialized
[ 0.858994] Initialise system trusted keyring
[ 0.859116] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.860862] zbud: loaded
[ 0.860972] VFS: Disk quotas dquot_6.6.0
[ 0.861015] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.861509] fuse init (API version 7.23)
[ 0.861673] Key type big_key registered
[ 0.862065] Key type asymmetric registered
[ 0.862071] Asymmetric key parser 'x509' registered
[ 0.862091] bounce: pool size: 64 pages
[ 0.862131] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.862172] io scheduler noop registered
[ 0.862178] io scheduler deadline registered (default)
[ 0.862217] io scheduler cfq registered
[ 0.862621] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.862631] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.862665] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 0.862669] vesafb: scrolling: redraw
[ 0.862673] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.862690] vesafb: framebuffer at 0xd0000000, mapped to 0xf8600000, using 3072k, total 3072k
[ 0.918879] Console: switching to colour frame buffer device 128x48
[ 0.975628] fb0: VESA VGA frame buffer device
[ 0.976102] intel_idle: MWAIT substates: 0x21120
[ 0.976103] intel_idle: v0.4.1 model 0x2A
[ 0.976105] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.976613] ACPI: AC Adapter [AC0] (on-line)
[ 0.977128] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.978009] ACPI: Power Button [PWRB]
[ 0.978438] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 0.979323] ACPI: Lid Switch [LID]
[ 0.979723] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 0.980603] ACPI: Sleep Button [SLPB]
[ 0.981029] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.981807] ACPI: Power Button [PWRF]
[ 0.983694] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.984293] ACPI: Thermal Zone [THRM] (69 C)
[ 0.984784] GHES: HEST is not enabled!
[ 0.985288] isapnp: Scanning for PnP cards...
[ 0.985315] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.990403] Linux agpgart interface v0.103
[ 0.995170] brd: module loaded
[ 0.995683] ACPI: Battery Slot [BAT0] (battery present)
[ 0.997017] loop: module loaded
[ 0.997588] libphy: Fixed MDIO Bus: probed
[ 0.998023] tun: Universal TUN/TAP device driver, 1.6
[ 0.998555] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.999262] PPP generic driver version 2.4.2
-
[ 1.023134] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.047300] ehci-pci: EHCI PCI platform driver
[ 1.071375] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.095253] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.119268] ehci-pci 0000:00:1a.0: debug port 2
[ 1.147012] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.147025] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf0807000
[ 1.178935] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.202407] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.226275] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.250388] usb usb1: Product: EHCI Host Controller
[ 1.274438] usb usb1: Manufacturer: Linux 4.4.0-21-generic ehci_hcd
[ 1.297355] isapnp: No Plug & Play device found
[ 1.322782] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.346780] hub 1-0:1.0: USB hub found
[ 1.370515] hub 1-0:1.0: 3 ports detected
[ 1.394425] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.418367] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.442544] ehci-pci 0000:00:1d.0: debug port 2
[ 1.470233] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.470244] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf0808000
[ 1.503018] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.526570] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.550401] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.574185] usb usb2: Product: EHCI Host Controller
[ 1.597622] usb usb2: Manufacturer: Linux 4.4.0-21-generic ehci_hcd
[ 1.621074] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.644463] hub 2-0:1.0: USB hub found
[ 1.667592] hub 2-0:1.0: 3 ports detected
[ 1.690316] ehci-platform: EHCI generic platform driver
[ 1.702998] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.735064] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.757202] ohci-pci: OHCI PCI platform driver
[ 1.778905] ohci-platform: OHCI generic platform driver
[ 1.800296] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.821764] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.835394] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.835396] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.835682] hub 1-1:1.0: USB hub found
[ 1.835774] hub 1-1:1.0: 6 ports detected
[ 1.930231] tsc: Refined TSC clocksource calibration: 2294.786 MHz
[ 1.951937] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2113f7e44a7, max_idle_ns: 440795281465 ns
[ 1.954253] i8042: Detected active multiplexing controller, rev 1.1
[ 1.955341] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.955347] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.955392] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.955434] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.955473] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.955726] mousedev: PS/2 mouse device common for all mice
[ 1.956301] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.956329] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.956340] i2c /dev entries driver
[ 1.956410] device-mapper: uevent: version 1.0.3
[ 1.956501] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 1.956528] platform eisa.0: Probing EISA bus 0
[ 1.956531] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 1.956532] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 1.956534] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 1.956535] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 1.956536] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 1.956538] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 1.956539] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 1.956540] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 1.956541] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 1.956543] platform eisa.0: EISA: Detected 0 cards
[ 1.956556] cpufreq-nforce2: No nForce2 chipset.
[ 1.956562] Intel P-state driver initializing.
[ 1.974725] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.975705] NET: Registered protocol family 10
[ 1.976484] NET: Registered protocol family 17
[ 1.976513] Key type dns_resolver registered
[ 1.977408] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x14
[ 1.999116] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x14
[ 1.999162] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x14
[ 1.999166] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x14
[ 1.999260] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.999282] Using IPI No-Shortcut mode
[ 1.999639] registered taskstats version 1
[ 1.999657] Loading compiled-in X.509 certificates
[ 2.002971] Loaded X.509 cert 'Build time autogenerated kernel key: 56e7e8a60ca69c909b96ce2276e3015b6f9a0d81'
[ 2.002990] zswap: loaded using pool lzo/zbud
[ 2.004671] Key type trusted registered
[ 2.007439] Key type encrypted registered
[ 2.007443] AppArmor: AppArmor sha1 policy hashing enabled
[ 2.007446] ima: No TPM chip found, activating TPM-bypass!
[ 2.007469] evm: HMAC attrs: 0x1
[ 2.007773] Magic number: 0:779:951
[ 2.007801] tty tty8: hash matches
[ 2.007821] memory memory4: hash matches
[ 2.018453] rtc_cmos 00:01: setting system clock to 2016-05-25 19:56:54 UTC (1464206214)
[ 2.018542] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.018542] EDD information not available.
[ 2.018656] PM: Hibernation image not present or could not be loaded.
[ 2.019034] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 2.025178] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 2.131047] usb 1-1.4: new low-speed USB device number 3 using ehci-pci
[ 2.167425] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 2.167427] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.167707] hub 2-1:1.0: USB hub found
[ 2.167799] hub 2-1:1.0: 6 ports detected
[ 2.243022] usb 1-1.4: New USB device found, idVendor=062a, idProduct=0003
[ 2.243023] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.243024] usb 1-1.4: Product: Optical Mouse
[ 2.243025] usb 1-1.4: Manufacturer: MosArt
[ 2.979058] Freeing unused kernel memory: 940K (c1b75000 - c1c60000)
[ 2.994524] Write protecting the kernel text: 7844k
[ 3.010310] Write protecting the kernel read-only data: 3124k
[ 3.026210] NX-protecting the kernel data: 6492k
[ 3.090309] random: systemd-udevd urandom read with 14 bits of entropy available
[ 3.128309] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[ 3.148615] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.148869] wmi: Mapper loaded
[ 3.194611] [drm] Initialized drm 1.1.0 20060810
[ 3.222144] ahci 0000:00:1f.2: version 3.0
[ 3.222309] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 3.242205] usbcore: registered new interface driver usbhid
[ 3.242233] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 3.242239] r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 3.242940] r8169 0000:04:00.0 eth0: RTL8168e/8111e at 0xf8466000, 44:87:fc:24:04:f3, XID 0c200000 IRQ 25
[ 3.242941] r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 3.262112] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0xd impl SATA mode
[ 3.262114] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
[ 3.275839] scsi host0: ahci
[ 3.275946] scsi host1: ahci
[ 3.276041] scsi host2: ahci
[ 3.276132] scsi host3: ahci
[ 3.276229] scsi host4: ahci
[ 3.276325] scsi host5: ahci
[ 3.276385] ata1: SATA max UDMA/133 abar m2048@0xf0809000 port 0xf0809100 irq 24
[ 3.276386] ata2: DUMMY
[ 3.276388] ata3: SATA max UDMA/133 abar m2048@0xf0809000 port 0xf0809200 irq 24
[ 3.276390] ata4: SATA max UDMA/133 abar m2048@0xf0809000 port 0xf0809280 irq 24
[ 3.276391] ata5: DUMMY
[ 3.276391] ata6: DUMMY
[ 3.303353] r8169 0000:04:00.0 enp4s0: renamed from eth0
[ 3.595217] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3.645724] ata1.00: ATA-9: WDC WD5000LPVX-00V0TT0, 01.01A01, max UDMA/133
[ 3.645727] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), a
[ 3.645730] [drm] Memory usable by graphics device = 2048M
[ 3.645733] checking generic (d0000000 300000) vs hw (d0000000 10000000)
[ 3.645734] fb: switching to inteldrmfb from VESA VGA
[ 3.728951] ata1.00: configured for UDMA/133
[ 3.729095] scsi 0:0:0:0: Direct-Access ATA WDC WD5000LPVX-0 1A01 PQ: 0 ANSI: 5
[ 3.729356] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 3.729358] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 3.729425] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.729448] sd 0:0:0:0: [sda] Write Protect is off
[ 3.729452] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.729483] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.769709] sda: sda1 sda2 sda3 sda4
[ 3.770182] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.931409] usbhid: USB HID core driver
[ 3.931464] Console: switching to colour dummy device 80x25
[ 3.931557] [drm] Replacing VGA console driver
[ 3.935107] input: MosArt Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:062A:0003.0001/input/input13
[ 3.935254] hid-generic 0003:062A:0003.0001: input,hidraw0: USB HID v1.10 Mouse [MosArt Optical Mouse] on usb-0000:00:1a.0-1.4/input0
[ 3.937360] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.937366] [drm] Driver supports precise vblank timestamp query.
[ 3.938106] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 3.957424] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 3.957783] ACPI Warning: \_SB_.PCI0.GFX0.DD02._BQC: Return type mismatch - found Reference, expected Integer (20150930/nspredef-290)
[ 3.959859] acpi device:31: registered as cooling_device4
[ 3.959957] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input14
[ 3.960060] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
[ 3.975552] clocksource: Switched to clocksource tsc
[ 4.047314] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.054532] ata3.00: ATAPI: Slimtype DVD A DS8A4S, JA22, max UDMA/100
[ 4.055950] ata3.00: configured for UDMA/100
[ 4.059818] scsi 2:0:0:0: CD-ROM Slimtype DVD A DS8A4S JA22 PQ: 0 ANSI: 5
[ 4.085481] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/188x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.085507] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.085656] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 4.085735] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 4.095932] fbcon: inteldrmfb (fb0) is primary device
[ 4.407339] ata4: SATA link down (SStatus 0 SControl 300)
[ 4.554053] psmouse serio4: synaptics: queried max coordinates: x [..5692], y [..4680]
[ 4.615218] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000/0x0, board id: 0, fw id: 582762
[ 4.654592] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input12
[ 4.951459] Console: switching to colour frame buffer device 170x48
[ 4.954882] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 5.968448] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 6.424559] random: nonblocking pool is initialized
[ 6.772705] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 6.772923] systemd[1]: Detected architecture x86.
[ 6.802006] systemd[1]: Set hostname to <user-desktop1>.
[ 8.960906] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 8.963632] systemd[1]: Listening on Journal Socket (/dev/log).
[ 8.966291] systemd[1]: Listening on Journal Socket.
[ 8.968944] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 8.971556] systemd[1]: Reached target Remote File Systems (Pre).
[ 8.974170] systemd[1]: Reached target Remote File Systems.
[ 8.976868] systemd[1]: Created slice System Slice.
[ 8.979520] systemd[1]: Created slice system-getty.slice.
[ 9.012106] systemd[1]: Starting Load Kernel Modules...
[ 9.015212] systemd[1]: Reached target Encrypted Volumes.
[ 9.018201] systemd[1]: Starting Braille Device Support...
[ 9.021321] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 9.088098] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 9.091453] systemd[1]: Starting Uncomplicated firewall...
[ 9.095029] systemd[1]: Mounting Huge Pages File System...
[ 9.098176] systemd[1]: Listening on Journal Audit Socket.
[ 9.100894] systemd[1]: Listening on udev Control Socket.
[ 9.103952] systemd[1]: Mounting Debug File System...
[ 9.152092] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 9.154866] systemd[1]: Reached target Swap.
[ 9.168004] systemd[1]: Started Read required files in advance.
[ 9.170814] systemd[1]: Reached target User and Group Name Lookups.
[ 9.173539] systemd[1]: Created slice User and Session Slice.
[ 9.176193] systemd[1]: Reached target Slices.
[ 9.178856] systemd[1]: Listening on udev Kernel Socket.
[ 9.181801] systemd[1]: Mounting POSIX Message Queue File System...
[ 9.184742] systemd[1]: Listening on Syslog Socket.
[ 9.187721] systemd[1]: Starting Journal Service...
[ 9.190716] systemd[1]: Starting Nameserver information manager...
[ 9.194709] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 9.251963] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 9.384144] systemd[1]: Mounted Huge Pages File System.
[ 9.387089] systemd[1]: Mounted POSIX Message Queue File System.
[ 9.389783] systemd[1]: Mounted Debug File System.
[ 9.486486] systemd[1]: Started Uncomplicated firewall.
[ 9.563989] systemd[1]: Started Nameserver information manager.
[ 9.592818] lp: driver loaded but no devices found
[ 9.710228] ppdev: user-space parallel port driver
[ 9.801179] systemd[1]: Started Journal Service.
-
[ 11.537984] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 11.717755] systemd-journald[240]: Received request to flush runtime journal from PID 1
[ 11.968862] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20150930/utaddress-254)
[ 11.968870] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.968875] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[ 11.968881] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.968882] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[ 11.968887] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.968889] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[ 11.968893] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.968895] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 12.025565] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 12.757146] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 12.757150] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 12.757151] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 12.757153] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 12.757154] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 12.757156] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x19
[ 12.757158] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 12.758680] asus_wmi: Asus Management GUID not found
[ 12.775347] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 12.775437] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 12.775513] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 12.945320] rtl8192ce: Using firmware rtlwifi/rtl8192cfw.bin
[ 12.967063] intel_rapl: Found RAPL domain package
[ 12.967067] intel_rapl: Found RAPL domain core
[ 12.967070] intel_rapl: Found RAPL domain uncore
[ 12.977573] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 12.977800] rtlwifi: rtlwifi: wireless switch is on
[ 13.020783] rtl8192ce 0000:02:00.0 wlp2s0: renamed from wlan0
[ 13.655364] cfg80211: World regulatory domain updated:
[ 13.655367] cfg80211: DFS Master region: unset
[ 13.655368] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 13.655370] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 13.655371] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 13.655372] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 13.655374] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 13.655376] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 13.655377] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 13.655378] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 13.655380] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 14.814066] audit: type=1400 audit(1464206227.299:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/ubuntu-core-launcher" pid=548 comm="apparmor_parser"
[ 14.911596] audit: type=1400 audit(1464206227.399:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=549 comm="apparmor_parser"
[ 14.912775] audit: type=1400 audit(1464206227.399:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=545 comm="apparmor_parser"
[ 14.912783] audit: type=1400 audit(1464206227.399:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=545 comm="apparmor_parser"
[ 14.912790] audit: type=1400 audit(1464206227.399:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=545 comm="apparmor_parser"
[ 14.912797] audit: type=1400 audit(1464206227.399:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=545 comm="apparmor_parser"
[ 14.914077] audit: type=1400 audit(1464206227.399:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=551 comm="apparmor_parser"
[ 14.944662] audit: type=1400 audit(1464206227.431:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=544 comm="apparmor_parser"
[ 14.944669] audit: type=1400 audit(1464206227.431:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=544 comm="apparmor_parser"
[ 14.947917] audit: type=1400 audit(1464206227.431:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=553 comm="apparmor_parser"
[ 20.247738] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[ 20.433383] r8169 0000:04:00.0 enp4s0: link down
[ 20.433455] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[ 20.888959] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 21.239169] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 22.507825] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 23.713507] wlp2s0: authenticate with fc:b0:c4:07:03:7e
[ 23.723765] wlp2s0: send auth to fc:b0:c4:07:03:7e (try 1/3)
[ 23.726648] wlp2s0: authenticated
[ 23.729453] wlp2s0: associate with fc:b0:c4:07:03:7e (try 1/3)
[ 23.733247] wlp2s0: RX AssocResp from fc:b0:c4:07:03:7e (capab=0xc31 status=0 aid=2)
[ 23.733785] wlp2s0: associated
[ 23.733820] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
-
Humm,
Não sei não, achei essa linha que me preocupou:
[ 2.018656] PM: Hibernation image not present or could not be loaded.
Certamente quando a imagem de hibernação estiver disponível vai voltar o problema!
Vou aguardar.
Obrigado.
-
Numa máquina idêntica a essa sua e com o mesmo problema, no Ubuntu 16.04.1 padrão (=Unity) funcionou acrescentando à linha de boot no menu inicial do grub o parâmetro:
acpi_backlight=vendor
A linha de boot ficará algo semelhante a isso:
cat /proc/cmdline
resulta em:
BOOT_IMAGE=/boot/vmlinuz-4.6.3-040603-generic root=UUID=7a0f44d0-f6b9-4660-bee6-b83634b2af41 ro acpi_backlight=vendor
Torne a alteração permanente editando o arquivo:
sudo gedit /etc/default/grub
altere a linha:
GRUB_CMDLINE_LINUX_DEFAULT="acpi_backlight=vendor"
(outros parâmetros que acaso existam previamente nessa linha pode deixar inalterados, isto é, apenas acrescente esse ora indicado)