Rede sem fio desabilitada

[zekkerj]

Eu entendo que atrapalha.

[markod]

Entendido. Desculpe-me pelo incomodo.

[evil_queen]

Acho que passou despercebido a minha última msg, porque o assunto acabou mudando, entâo vou repostar:

E como eu faço esse teste com o driver do windows?
No synaptic diz que eu tenho instalado o ndisgtk, o ndiswrapper-common e o ndiswrapper-utils-1.9.
Mas não tenho idéia de como testar.

Obrigada pela ajuda e paciencia até agora

[zekkerj]

Então, evil_queen: o ndiswrapper precisa do driver do windows, pra funcionar.

A primeira coisa que vc precisa é justamente do driver windows. Consiga o CD de instalação da placa de rede (Não do windows, ok?), procure por um arquivo ".inf" nele. Talvez o google possa te ajudar a localizar qual é o arquivo, e/ou de onde baixá-lo.

Quando achar, digamos que o nome do arquivo seja BCM4312.inf (pode não ser, lembre-se). Você vai copiar esse arquivo pra sua pasta HOME e executar o comando:

sudo ndiswrapper -i BCM4318.inf

Em seguida vc tem que retirar o driver nativo do caminho:

sudo modprobe -r b43

E ativar o driver ndiswrapper.

sudo modprobe ndiswrapper

(Estes 2 últimos comandos não vão dar nenhuma mensagem, caso funcionem).

Nessa hora, vc tem que conseguir ativar sua rede.

nm-tool

iwconfig wlan0

iwlist wlan0 scan

Antes de reiniciar, vc tem que bloquear o driver "b43", pra que ele não volte, e marcar pro driver "ndiswrapper" ser carregado automaticamente.

sudo -s
echo "blacklist b43" >> /etc/modprobe.d/blacklist.conf
echo "ndiswrapper" >> /etc/modules
exit

[evil_queen]

Eu colo na pasta home ou na pasta pessoal (com o meu nome)?
Porque tentei colar na pasta home e ele não aceitou.
ó confirmando:
Minha placa, segundo as informações do terminal, é Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02). è isso mesmo?
Achei pra baixar o arquivo Broadcom WLAN 4318 Driver 4.102.15.56 que possui o arquivo bcmwl6.inf dentro da pasta. É este arquivo que tenho que copiar?

[zekkerj]

Eu colo na pasta home ou na pasta pessoal (com o meu nome)?
Porque tentei colar na pasta home e ele não aceitou.

É pra colocar na sua pasta home, ou seja, na que tem o seu nome.

ó confirmando:
Minha placa, segundo as informações do terminal, é Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02). è isso mesmo?
Achei pra baixar o arquivo Broadcom WLAN 4318 Driver 4.102.15.56 que possui o arquivo bcmwl6.inf dentro da pasta. É este arquivo que tenho que copiar?

Até prova em contrário é esse mesmo.

[evil_queen]

Ah tah rsrsrs
Vou tentar com esse arquivo, se nâo rolar, eu achei alguns lugares falando pra baixar o bcmwl5a.inf.

[evil_queen]

Acho que deu um problema na hora de configurar a wlan0

livia@Lucid:~$ sudo ndiswrapper -i BCMWL6.inf
driver bcmwl6 is already installed
livia@Lucid:~$ sudo modprobe -r b43
livia@Lucid:~$ sudo modprobe ndiswrapper
livia@Lucid:~$ nm-tool

NetworkManager Tool

State: connected

- Device: eth0  [Auto eth0] ----------------------------------------------------
  Type:              Wired
  Driver:            8139too
  State:             connected
  Default:           yes
  HW Address:        00:0B:CD:ED:39:D3

  Capabilities:
    Carrier Detect:  yes
    Speed:           100 Mb/s

  Wired Properties
    Carrier:         on

  IPv4 Settings:
    Address:         192.168.1.6
    Prefix:          24 (255.255.255.0)
    Gateway:         192.168.1.1

    DNS:             192.168.1.1


livia@Lucid:~$ iwconfig wlan0
wlan0     No such device

livia@Lucid:~$ iwlist wlano scan
wlano     Interface doesn't support scanning.

Nâo terminei o comando (bloquear b43) nem fechei o terminal ainda... Ah... e antes de dar o comando iwconfig wlan0 eu desconectei a internet do cabo e deixei so o wireless...

[zekkerj]

Execute o comando abaixo e cole o resultado aqui.

dmesg | tail -50

[evil_queen]

 # dmesg | tail -50
[  362.043980] psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[  362.045126] psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[  362.045129] psmouse.c: issuing reconnect request
[  366.055660] psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[  366.056805] psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[  366.059925] psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[  366.061090] psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[  366.062235] psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[  366.062238] psmouse.c: issuing reconnect request
[  387.997941] psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 4
[  387.999949] psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[  388.011065] psmouse.c: TouchPad at isa0060/serio1/input0 - driver resynched.
[  499.740457] psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[  499.740463] psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[  499.741558] psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[  499.742665] psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[  499.744549] psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[  499.744554] psmouse.c: issuing reconnect request
[  927.976318] psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[  927.977412] psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[  927.978519] psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[  927.980597] psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[  927.981701] psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[  927.981705] psmouse.c: issuing reconnect request
[ 1498.093607] psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 1498.094701] psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 1498.095808] psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 1498.096929] psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 1498.099023] psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 1498.099028] psmouse.c: issuing reconnect request
[ 1526.981608] psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 1526.982745] psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 1526.983858] psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 1526.985014] psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 1526.986901] psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 1526.986904] psmouse.c: issuing reconnect request
[ 1797.974537] psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 1797.975642] psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 1797.977705] psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 1797.978815] psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 1797.979925] psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 1797.979929] psmouse.c: issuing reconnect request
[ 1913.318731] psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 4
[ 1913.326177] psmouse.c: TouchPad at isa0060/serio1/input0 - driver resynched.
[ 2098.025353] psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 2098.026453] psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 2098.027603] psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 2098.029452] psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 2098.030559] psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 2098.030562] psmouse.c: issuing reconnect request

[zekkerj]

Hmmm. Vc tem um outro problema com o touchpad, que está escondendo a saída do comando dmesg pra placa de vídeo.

Reinicie a máquina, repita os comandos "modprobe", depois execute o comando abaixo, cole o resultado aqui.

dmesg | grep -v psmouse | tail -50

[evil_queen]

$ sudo modprobe -r b43
[sudo] password :
$ sudo modprobe wl
FATAL: Module wl not found.

~$ dmesg | grep -v psmouse | tail -50
[   18.456719] yenta_cardbus 0000:06:09.0: ISA IRQ mask 0x0cf8, PCI irq 20
[   18.456728] yenta_cardbus 0000:06:09.0: Socket status: 30000006
[   18.456733] pci_bus 0000:06: Raising subordinate bus# of parent bus (#06) from #06 to #0a
[   18.456748] yenta_cardbus 0000:06:09.0: pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
[   18.456754] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3000-0x3fff: clean.
[   18.457033] yenta_cardbus 0000:06:09.0: pcmcia: parent PCI bridge Memory window: 0xb0100000 - 0xb01fffff
[   18.457037] yenta_cardbus 0000:06:09.0: pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x23ffffff
[   18.459142] b43-phy0: Broadcom 4318 WLAN found (core revision 9)
[   18.557003] phy0: Selected rate control algorithm 'minstrel'
[   18.557933] Registered led device: b43-phy0::radio
[   18.558036] Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ]
[   18.614590] [drm] initialized overlay support
[   18.933140] Synaptics Touchpad, model: 1, fw: 5.10, id: 0x258eb1, caps: 0xa04713/0x0
[   18.964929] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[   19.235186] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[   19.236616] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[   19.237222] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[   19.237718] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[   19.238388] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[   19.279863] fb0: inteldrmfb frame buffer device
[   19.279868] registered panic notifier
[   19.279881] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   19.279946]   alloc irq_desc for 17 on node -1
[   19.279949]   alloc kstat_irqs on node -1
[   19.279960] Intel ICH 0000:00:1e.2: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   19.279988] Intel ICH 0000:00:1e.2: setting latency timer to 64
[   19.288523] vga16fb: initializing
[   19.288530] vga16fb: mapped to 0xc00a0000
[   19.288537] vga16fb: not registering due to another framebuffer present
[   19.341963] type=1505 audit(1281566947.521:5):  operation="profile_load" pid=682 name="/usr/share/gdm/guest-session/Xsession"
[   19.345094] type=1505 audit(1281566947.525:6):  operation="profile_replace" pid=683 name="/sbin/dhclient3"
[   19.345904] type=1505 audit(1281566947.525:7):  operation="profile_replace" pid=683 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   19.346345] type=1505 audit(1281566947.525::  operation="profile_replace" pid=683 name="/usr/lib/connman/scripts/dhclient-script"
[   19.360385] type=1505 audit(1281566947.541:9):  operation="profile_load" pid=684 name="/usr/bin/evince"
[   19.390282] type=1505 audit(1281566947.569:10):  operation="profile_load" pid=684 name="/usr/bin/evince-previewer"
[   19.406529] type=1505 audit(1281566947.585:11):  operation="profile_load" pid=684 name="/usr/bin/evince-thumbnailer"
[   19.431745] Console: switching to colour frame buffer device 160x48
[   19.573975] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[   19.600057] intel8x0_measure_ac97_clock: measured 53971 usecs (2600 samples)
[   19.600062] intel8x0: clocking to 48000
[   19.860108] b43 ssb0:0: firmware: requesting b43/ucode5.fw
[   19.908575] b43 ssb0:0: firmware: requesting b43/pcm5.fw
[   19.916129] b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw
[   19.921513] b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw
[   20.085051] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[   20.146509] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   20.172183] b43-phy0: Radio hardware status changed to DISABLED
[   20.201376] ppdev: user-space parallel port driver
[   29.736021] eth0: no IPv6 routers present
[  214.192219] b43-pci-bridge 0000:06:06.0: PCI INT A disabled

[zekkerj]

Mais um teste. Reinicie o computador, não mexa nos módulos.

sudo rfkill block all
sudo rfkill unblock all

sudo lshw -C network

Cole o resultado aqui, como de costume.

[evil_queen]

livia@Lucid:~$ sudo rfkill block all
[sudo] password for livia:
livia@Lucid:~$ sudo rfkill unblock all
livia@Lucid:~$ sudo lshw -C network
  *-network:0             
       description: Ethernet interface
       product: RTL-8139/8139C/8139C+
       vendor: Realtek Semiconductor Co., Ltd.
       physical id: 0
       bus info: pci@0000:06:00.0
       logical name: eth0
       version: 10
       serial: 00:0b:cd:ed:39:d3
       size: 100MB/s
       capacity: 100MB/s
       width: 32 bits
       clock: 33MHz
       capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=8139too driverversion=0.9.28 duplex=full ip=192.168.1.6 latency=64 link=yes maxlatency=64 mingnt=32 multicast=yes port=MII speed=100MB/s
       resources: irq:16 ioport:3000(size=256) memory:b0108000-b01080ff
  *-network:1
       description: Network controller
       product: BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller
       vendor: Broadcom Corporation
       physical id: 6
       bus info: pci@0000:06:06.0
       version: 02
       width: 32 bits
       clock: 33MHz
       capabilities: bus_master
       configuration: driver=b43-pci-bridge latency=32
       resources: irq:18 memory:b0104000-b0105fff
  *-network DISABLED
       description: Wireless interface
       physical id: 1
       logical name: wlan0
       serial: 00:14:a5:18:63:47
       capabilities: ethernet physical wireless
       configuration: broadcast=yes multicast=yes wireless=IEEE 802.11bg