Fórum Ubuntu Linux - PT
Suporte Técnico => Internet, Redes e Segurança => Tópico iniciado por: ubuntu-pc em 13 de Setembro de 2012, 21:00
-
Ola,
eu tenho um adaptador wireless usb mais não consigo instalar os drivers dele não sei onde fica os drives no ubuntu. será que tenho que desativar a placa wireless que já tem no note ? quais os comando que preciso dar ?? sou iniciante e não conheço muito se puderem me ajudar. meu ubuntu e 11.04
se puderem me ajudar agradeço.
-
Ola
Hummm... adaptador wireless.... hummm...
O meu aqui funciona perfeitamente. será que o seu é igual ao meu?
Eu infelizmente não consegui ver a marca e modelo de seu adaptador enquanto voce postava. Sabe, minhas lentes estão fracas....
Deixando a piada de lado, por favor poste a marca e o modelo de seu adaptador.
Entre em terminal e, com o adaptador plugado na USB digite:
sudo lsusb
(Com éle minusculo)
Copie e cole o resultado aqui para o forum poder analisar.
Movido para a sessão => Internet, Redes e Segurança
[]'s
-
Olá, poderia me fornecer qual o modelo e marca da sua placa? Antes de tudo, atualize o kernel do sistema, como faço isso? pela central de atualizações... Segundo lugar, se for Atheros, baixe o madwifi. Que pode ser encontrado aqui: http://madwifi-project.org/
-
Pode dizer como ele vai atualizar o sistema sem uma conexão válida?
-
Pode dizer como ele vai atualizar o sistema sem uma conexão válida?
pessoal minha placa e uma ralink RT2870 ja baixei os drivers
dou o comando make e vai normal
comando config.mk
ele não encontra e
o make install da varios erro olha ai embaixo !!! se conseguirem me ajudar já nem durmo mais
root@ubuntu-pc:/home/ubuntu/Documentos/2010_0709_RT2870_Linux_STA_v2.4.0.1# make install
make -C /home/ubuntu/Documentos/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux -f Makefile.6 install
mkdir: é impossível criar o diretório "/etc/Wireless": Arquivo existe
make[1]: Entrando no diretório `/home/ubuntu/Documentos/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux'
rm -rf /etc/Wireless/RT2870STA
mkdir /etc/Wireless/RT2870STA
cp /home/ubuntu/Documentos/2010_0709_RT2870_Linux_STA_v2.4.0.1/RT2870STA.dat /etc/Wireless/RT2870STA/.
install -d /lib/modules/3.0.0-26-generic/kernel/drivers/net/wireless/
install -m 644 -c rt2870sta.ko /lib/modules/3.0.0-26-generic/kernel/drivers/net/wireless/
install: impossível obter estado de "rt2870sta.ko": Arquivo ou diretório não encontrado
make[1]: ** [install] Erro 1
make[1]: Saindo do diretório `/home/ubuntu/Documentos/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux'
make: ** [install] Erro 2
pessoal e tem um arquivo que não consigo achar que é o rt2870.o/rt2870.ko
e o documento README_STA se ajudar a me ajudar rsrs
* README
*
* Ralink Tech Inc.
*
* http://www.ralinktech.com
*
=======================================================================
ModelName:
===========
RT2870 Wireless Lan Linux Driver
=======================================================================
Driver lName:
===========
rt2870.o/rt2870.ko
=======================================================================
Supporting Kernel:
===================
linux kernel 2.4 and 2.6 series.
Tested in Redhat 7.3 or later.
=======================================================================
Ralink Hardware:
===================
Ralink 802.11n Wireless LAN Card.
=======================================================================
Description:
=============
This is a linux device driver for Ralink RT2870 USB ABGN WLAN Card.
=======================================================================
Contents:
=============
Makefile : Makefile
*.c : c files
*.h : header files
=======================================================================
Features:
==========
This driver implements basic IEEE802.11. Infrastructure and adhoc mode with
open or shared or WPA-PSK or WPA2-PSK authentication method.
NONE, WEP, TKIP and AES encryption.
=======================================================================
Build Instructions:
====================
1> $tar -xvzf RT2870_Linux_STA_x.x.x.x.tgz
go to "./RT2870_Linux_STA_x.x.x.x" directory.
2> In Makefile
set the "MODE = STA" in Makefile and chose the TARGET to Linux by set "TARGET = LINUX"
define the linux kernel source include file path LINUX_SRC
modify to meet your need.
3> In os/linux/config.mk
define the GCC and LD of the target machine
define the compiler flags CFLAGS
modify to meet your need.
** Build for being controlled by NetworkManager or wpa_supplicant wext functions
Please set 'HAS_WPA_SUPPLICANT=y' and 'HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=y'.
=> #>cd wpa_supplicant-x.x
=> #>./wpa_supplicant -Dwext -ira0 -c wpa_supplicant.conf -d
** Build for being controlled by WpaSupplicant with Ralink Driver
Please set 'HAS_WPA_SUPPLICANT=y' and 'HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=n'.
=> #>cd wpa_supplicant-0.5.7
=> #>./wpa_supplicant -Dralink -ira0 -c wpa_supplicant.conf -d
4> $make
# compile driver source code
# To fix "error: too few arguments to function ¡¥iwe_stream_add_event"
=> $patch -i os/linux/sta_ioctl.c.patch os/linux/sta_ioctl.c
5> $cp RT2870STA.dat /etc/Wireless/RT2870STA/RT2870STA.dat
6> load driver, go to "os/linux/" directory.
#[kernel 2.4]
# $/sbin/insmod rt2870sta.o
# $/sbin/ifconfig ra0 inet YOUR_IP up
#[kernel 2.6]
# $/sbin/insmod rt2870sta.ko
# $/sbin/ifconfig ra0 inet YOUR_IP up
7> unload driver
$/sbin/ifconfig ra0 down
$/sbin/rmmod rt2870sta
=======================================================================
CONFIGURATION:
====================
RT2870 driver can be configured via following interfaces,
i.e. (i)"iwconfig" command, (ii)"iwpriv" command, (iii) configuration file
i) iwconfig comes with kernel.
ii) iwpriv usage, please refer to file "iwpriv_usage.txt" for details.
iii)modify configuration file "RT2870STA.dat" in /etc/Wireless/RT2870STA/RT2870STA.dat.
Configuration File : RT2870STA.dat
---------------------------------------
# Copy this file to /etc/Wireless/RT2870STA/RT2870STA.dat
# This file is a binary file and will be read on loading rt.o module.
#
# Use "vi RT2870STA.dat" to modify settings according to your need.
#
# 1.) set NetworkType to "Adhoc" for using Adhoc-mode, otherwise using Infrastructure
# 2.) set Channel to "0" for auto-select on Infrastructure mode
# 3.) set SSID for connecting to your Accss-point.
# 4.) AuthMode can be "WEPAUTO", "OPEN", "SHARED", "WPAPSK", "WPA2PSK", "WPANONE"
# 5.) EncrypType can be "NONE", "WEP", "TKIP", "AES"
# for more information refer to the Readme file.
#
#The word of "Default" must not be removed
Default
CountryRegion=5
CountryRegionABand=7
CountryCode=
SSID=Dennis2860AP
NetworkType=Infra
WirelessMode=9
Channel=0
BeaconPeriod=100
TxPower=100
BGProtection=0
TxPreamble=0
RTSThreshold=2347
FragThreshold=2346
TxBurst=1
WmmCapable=0
AckPolicy=0;0;0;0
AuthMode=OPEN
EncrypType=NONE
WPAPSK=
DefaultKeyID=1
Key1Type=0
Key1Str=
Key2Type=0
Key2Str=
Key3Type=0
Key3Str=
Key4Type=0
Key4Str=
PSMode=CAM
FastRoaming=0
RoamThreshold=70
HT_RDG=1
HT_EXTCHA=0
HT_OpMode=1
HT_MpduDensity=4
HT_BW=1
HT_AutoBA=1
HT_BADecline=0
HT_AMSDU=0
HT_BAWinSize=64
HT_GI=1
HT_MCS=33
HT_MIMOPSMode=3
IEEE80211H=0
TGnWifiTest=0
WirelessEvent=0
CarrierDetect=0
-----------------------------------------------
*NOTE:
WMM parameters
WmmCapable Set it as 1 to turn on WMM Qos support
AckPolicy1~4 Ack policy which support normal Ack or no Ack
(AC_BK, AC_BE, AC_VI, AC_VO)
All WMM parameters do not support iwpriv command but ¡¥WmmCapable¡Š¡Š,
please store all parameter to RT2870STA.dat, and restart driver.
-----------------------------------------------
syntax is 'Param'='Value' and describes below.
@> CountryRegion=value
value
0: use 1 ~ 11 Channel
1: use 1 ~ 13 Channel
2: use 10 ~ 11 Channel
3: use 10 ~ 13 Channel
4: use 14 Channel
5: use 1 ~ 14 Channel
6: use 3 ~ 9 Channel
7: use 5 ~ 13 Channel
31: use 1 ~ 14 Channel (ch1-11:active scan, ch12-14 passive scan)
@> CountryRegionABand=value
value
0: use 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165 Channel
1: use 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 Channel
2: use 36, 40, 44, 48, 52, 56, 60, 64 Channel
3: use 52, 56, 60, 64, 149, 153, 157, 161 Channel
4: use 149, 153, 157, 161, 165 Channel
5: use 149, 153, 157, 161 Channel
6: use 36, 40, 44, 48 Channel
7: use 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165 Channel
8: use 52, 56, 60, 64 Channel
9: use 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 132, 136, 140, 149, 153, 157, 161, 165 Channel
10: use 36, 40, 44, 48, 149, 153, 157, 161, 165 Channel
11: use 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 149, 153, 157, 161 Channel
@> CountryCode=value
value
AG, AR, AW, AU, AT, BS, BB, BM, BR, BE, BG, CA, KY, CL, CN, CO, CR, CY, CZ, DK, DO, EC, SV, FI, FR, DE,
GR, GU, GT, HT, HN, HK, HU, IS, IN, ID, IE, IL, IT, JP, JO, LV, LI, LT, LU, MY, MT, MA, MX, NL, NZ, NO,
PE, PT, PL, RO, RU, SA, CS, SG, SK, SI, ZA, cara, ES, SE, CH, TW, TR, GB, UA, AE, US, VE
"" => using default setting: 2.4 G - ch 1~11; 5G - ch 52~64, 100~140, 149~165
@> SSID=value
value
0~z, 1~32 ascii characters.
@> WirelessMode=value
value
0: legacy 11b/g mixed
1: legacy 11B only
2: legacy 11A only //Not support in RfIcType=1(id=RFIC_5225) and RfIcType=2(id=RFIC_5325)
3: legacy 11a/b/g mixed //Not support in RfIcType=1(id=RFIC_5225) and RfIcType=2(id=RFIC_5325)
4: legacy 11G only
5: 11ABGN mixed
6: 11N only
7: 11GN mixed
8: 11AN mixed
9: 11BGN mixed
10: 11AGN mixed
@> Channel=value
value
depends on CountryRegion or CountryRegionABand
@> BGProtection=value
value
0: Auto
1: Always on
2: Always off
@> TxPreamble=value
value
0:Preamble Long
1:Preamble Short
2:Auto
@> RTSThreshold=value
value
1~2347
@> FragThreshold=value
value
256~2346
@> TxBurst=value
value
0: Disable
1: Enable
@> NetworkType=value
value
Infra: infrastructure mode
Adhoc: adhoc mode
@> AuthMode=value
value
OPEN For open system
SHARED For shared key system
WEPAUTO Auto switch between OPEN and SHARED
WPAPSK For WPA pre-shared key (Infra)
WPA2PSK For WPA2 pre-shared key (Infra)
WPANONE For WPA pre-shared key (Adhoc)
WPA Use WPA-Supplicant
WPA2 Use WPA-Supplicant
@> EncrypType=value
value
NONE For AuthMode=OPEN
WEP For AuthMode=OPEN or AuthMode=SHARED
TKIP For AuthMode=WPAPSK or WPA2PSK
AES For AuthMode=WPAPSK or WPA2PSK
@> DefaultKeyID=value
value
1~4
@> Key1=value
Key2=value
Key3=value
Key4=value
value
10 or 26 hexadecimal characters eg: 012345678
5 or 13 ascii characters eg: passd
(usage : "iwpriv" only)
@> Key1Type=vaule
Key2Type=value
Key3Type=vaule
Key4Type=vaule
value
0 hexadecimal type
1 assic type
(usage : reading profile only)
@> Key1Str=value
Key2Str=value
Key3Str=vaule
Key4Str=vaule
value
10 or 26 characters (key type=0)
5 or 13 characters (key type=1)
(usage : reading profile only)
@> WPAPSK=value
value
8~63 ASCII or
64 HEX characters
@> WmmCapable=value
value
0: Disable WMM
1: Enable WMM
@> PSMode=value
value
CAM Constantly Awake Mode
Max_PSP Max Power Savings
Fast_PSP Power Save Mode
@> FastRoaming=value
value
0 Disabled
1 Enabled
@> RoamThreshold=value
value
Positive Interger(dBm)
@> HT_RDG=value
value
0 Disabled
1 Enabled
@> HT_EXTCHA=value (Extended Channel Switch Announcement)
value
0 Below
1 Above
@> HT_OpMode=value
value
0 HT mixed format
1 HT greenfield format
@> HT_MpduDensity=value
value (based on 802.11n D2.0)
0: no restriction
1: 1/4 £gs
2: 1/2 £gs
3: 1 £gs
4: 2 £gs
5: 4 £gs
6: 8 £gs
7: 16 £gs
@> HT_BW=value
value
0 20MHz
1 40MHz
@> HT_AutoBA=value
value
0 Disabled
1 Enabled
@> HT_BADecline
value
0 Disabled
1 Enabled <Reject BA request from AP>
@> HT_AMSDU=value
value
0 Disabled
1 Enabled
@> HT_BAWinSize=value
value
1 ~ 64
@> HT_GI=value
value
0 long GI
1 short GI
@> HT_MCS=value
value
0 ~ 15
33: auto
@> HT_MIMOPSMode=value
value (based on 802.11n D2.0)
0 Static SM Power Save Mode
1 Dynamic SM Power Save Mode
2 Reserved
3 SM enabled
(not fully support yet)
@> IEEE80211H=value
value
0 Disabled
1 Enabled
@> TGnWifiTest=value
value
0 Disabled
1 Enabled
@> WirelessEvent=value
value
0 Disabled
1 Enabled <send custom wireless event>
@> CarrierDetect=value
value
0 Disabled
1 Enabled
MORE INFORMATION
=================================================================================
If you want for rt2870 driver to auto-load at boot time:
A) choose ra0 for first RT2870 WLAN card, ra1 for second RT2870 WLAN card, etc.
B) create(edit) 'ifcfg-ra0' file in /etc/sysconfig/network-scripts/,
edit( or add the line) in /etc/modules.conf:
alias ra0 rt2870sta
C) edit(create) the file /etc/sysconfig/network-scripts/ifcfg-ra0
DEVICE='ra0'
ONBOOT='yes'
NOTE:
if you use dhcp, add this line too .
BOOTPROTO='dhcp'
*D) To ease the Default Gateway setting,
add the line
GATEWAY=x.x.x.x
in /etc/sysconfig/network
-
ubuntu-pc, apenas em alguns casos especiais é necessário instalar algum driver adicional no Ubuntu.
Eu sempre recomendo que antes de se tentar qualquer driver adicional, deve se tentar com os drivers nativos.
-
ubuntu-pc, apenas em alguns casos especiais é necessário instalar algum driver adicional no Ubuntu.
Eu sempre recomendo que antes de se tentar qualquer driver adicional, deve se tentar com os drivers nativos.
como faço para usar os drivers nativos ?? ainda sou iniciante ;D
-
Pois é, o driver nativo é aquele que é carregado automaticamente. Na verdade, você não mostrou muito de sua máquina até agora. De repente os drivers já estão carregados, e você nem notou...
Vamos do início? Execute os comandos abaixo e cole o resultado aqui.
lsusb
sudo lshw -C network
iwconfig
ifconfig -a
nm-tool
rfkill list wifi
-
Pois é, o driver nativo é aquele que é carregado automaticamente. Na verdade, você não mostrou muito de sua máquina até agora. De repente os drivers já estão carregados, e você nem notou...
Vamos do início? Execute os comandos abaixo e cole o resultado aqui.
lsusb
sudo lshw -C network
iwconfig
ifconfig -a
nm-tool
rfkill list wifi
Amigo obrigado pela ajuda... olha ai os comando que pediu.
ubuntu@ubuntu-pc:~$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 148f:5370 Ralink Technology, Corp.
Bus 001 Device 003: ID 0ac8:c33f Z-Star Microelectronics Corp. Webcam
Bus 008 Device 002: ID 0a5c:219b Broadcom Corp. Bluetooth 2.1 Device
ubuntu@ubuntu-pc:~$ sudo lshw -C network
[sudo] password for ubuntu:
*-network
description: Wireless interface
product: AR9285 Wireless Network Adapter (PCI-Express)
vendor: Atheros Communications Inc.
physical id: 0
bus info: pci@0000:02:00.0
logical name: wlan0
version: 01
serial: 00:26:b6:e8:c8:48
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=ath9k driverversion=3.0.0-26-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn
resources: irq:16 memory:f4000000-f400ffff
*-network
description: Ethernet interface
product: 88E8040 PCI-E Fast Ethernet Controller
vendor: Marvell Technology Group Ltd.
physical id: 0
bus info: pci@0000:04:00.0
logical name: eth0
version: 00
serial: 00:24:54:47:ab:56
capacity: 100Mbit/s
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.28 firmware=N/A latency=0 link=no multicast=yes port=twisted pair
resources: irq:42 memory:f6000000-f6003fff ioport:3000(size=256)
ubuntu@ubuntu-pc:~$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11bgn ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=14 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:off
ppp0 no wireless extensions.
ubuntu@ubuntu-pc:~$ ifconfig -a
eth0 Link encap:Ethernet Endereço de HW 00:24:54:47:ab:56
UP BROADCAST MULTICAST MTU:1500 Métrica:1
pacotes RX:0 erros:0 descartados:0 excesso:0 quadro:0
Pacotes TX:0 erros:0 descartados:0 excesso:0 portadora:0
colisões:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
IRQ:19
lo Link encap:Loopback Local
inet end.: 127.0.0.1 Masc:255.0.0.0
endereço inet6: ::1/128 Escopo:Máquina
UP LOOPBACK RUNNING MTU:16436 Métrica:1
pacotes RX:356 erros:0 descartados:0 excesso:0 quadro:0
Pacotes TX:356 erros:0 descartados:0 excesso:0 portadora:0
colisões:0 txqueuelen:0
RX bytes:27200 (27.2 KB) TX bytes:27200 (27.2 KB)
ppp0 Link encap:Protocolo Ponto-a-Ponto
inet end.: 189.99.73.86 P-a-P:169.254.1.1 Masc:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Métrica:1
pacotes RX:903 erros:0 descartados:0 excesso:0 quadro:0
Pacotes TX:1022 erros:0 descartados:0 excesso:0 portadora:0
colisões:0 txqueuelen:3
RX bytes:430584 (430.5 KB) TX bytes:96795 (96.7 KB)
wlan0 Link encap:Ethernet Endereço de HW 00:26:b6:e8:c8:48
UP BROADCAST MULTICAST MTU:1500 Métrica:1
pacotes RX:0 erros:0 descartados:0 excesso:0 quadro:0
Pacotes TX:0 erros:0 descartados:0 excesso:0 portadora:0
colisões:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
ubuntu@ubuntu-pc:~$ nm-tool
NetworkManager Tool
State: connected (global)
- Device: wlan0 ----------------------------------------------------------------
Type: 802.11 WiFi
Driver: ath9k
State: disconnected
Default: no
HW Address: 00:26:B6:E8:C8:48
Capabilities:
Wireless Properties
WEP Encryption: yes
WPA Encryption: yes
WPA2 Encryption: yes
Wireless Access Points
TP-LINK_D863F6: Infra, 00:23:CD:D8:63:F6, Freq 2437 MHz, Rate 54 Mb/s, Strength 20
- Device: eth0 -----------------------------------------------------------------
Type: Wired
Driver: sky2
State: unavailable
Default: no
HW Address: 00:24:54:47:AB:56
Capabilities:
Carrier Detect: yes
Wired Properties
Carrier: off
ubuntu@ubuntu-pc:~$ rfkill list wifi
1: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
-
Como eu imaginei, vc tem uma Wireless Onboard... algum motivo em especial pra não usá-la?
-
Como eu imaginei, vc tem uma Wireless Onboard... algum motivo em especial pra não usá-la?
Sim tenho... eu já tentei colocar ela na blacklist e instalar a outra mais não deu certo... E que a onboard não e tão boa e eu fiz um teste no windows e a usb pega mais redes..
será que eu consigo deixar as duas ativadas ?
-
Normalmente o wireless onboard funciona melhor. Não há necessidade de bloqueio, pois elas não interferem uma na outra.
Sobre seu adaptador:
http://ubuntuforum-br.org/index.php/topic,93972.0.html
-
Normalmente o wireless onboard funciona melhor. Não há necessidade de bloqueio, pois elas não interferem uma na outra.
Sobre seu adaptador:
http://ubuntuforum-br.org/index.php/topic,93972.0.html
amigo mesmo depois das configurações no config.mk não consegui executar o make install da o mesmo erro la de cima
-
Que config.mk?
-
Que config.mk?
valeu valeu··· eu consegui !!!!eu que estava errando baixando o driver errado. baixei o driver certo e foi !!!!muito obrigado a todos !!!