Webcam q pegava no breezy não pega no dapper...

[Servo]

Gostaria q vcs me ajudassem , pois a minha webcam funcionava perfeitamente no breezy, mas np dapper ela é reconhecida no gnomemeeting, no amsn (sendo que não aparece a imagem0, mas no camorama e camstream ela não é reconhecida. Detalhe, ela está sendo reconhecida no 4l2 e não no 4l. O q pode ser?

lyncoln@lyncoln-desktop:~$ cat /proc/bus/usb/devices

T:  Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 6
B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.15-23-386 ehci_hcd
S:  Product=EHCI Host Controller
S:  SerialNumber=0000:00:10.3
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=256ms

T:  Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.15-23-386 uhci_hcd
S:  Product=UHCI Host Controller
S:  SerialNumber=0000:00:10.2
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms

T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.15-23-386 uhci_hcd
S:  Product=UHCI Host Controller
S:  SerialNumber=0000:00:10.1
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms

T:  Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0c45 ProdID=602c Rev= 1.01
S:  Product=USB camera
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=sn9c102
E:  Ad=81(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=83(I) Atr=03(Int.) MxPS=   1 Ivl=100ms
I:  If#= 0 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=sn9c102
E:  Ad=81(I) Atr=01(Isoc) MxPS= 128 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=83(I) Atr=03(Int.) MxPS=   1 Ivl=100ms
I:  If#= 0 Alt= 2 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=sn9c102
E:  Ad=81(I) Atr=01(Isoc) MxPS= 256 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=83(I) Atr=03(Int.) MxPS=   1 Ivl=100ms
I:  If#= 0 Alt= 3 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=sn9c102
E:  Ad=81(I) Atr=01(Isoc) MxPS= 384 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=83(I) Atr=03(Int.) MxPS=   1 Ivl=100ms
I:  If#= 0 Alt= 4 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=sn9c102
E:  Ad=81(I) Atr=01(Isoc) MxPS= 512 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=83(I) Atr=03(Int.) MxPS=   1 Ivl=100ms
I:  If#= 0 Alt= 5 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=sn9c102
E:  Ad=81(I) Atr=01(Isoc) MxPS= 680 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=83(I) Atr=03(Int.) MxPS=   1 Ivl=100ms
I:  If#= 0 Alt= 6 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=sn9c102
E:  Ad=81(I) Atr=01(Isoc) MxPS= 800 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=83(I) Atr=03(Int.) MxPS=   1 Ivl=100ms
I:  If#= 0 Alt= 7 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=sn9c102
E:  Ad=81(I) Atr=01(Isoc) MxPS= 900 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=83(I) Atr=03(Int.) MxPS=   1 Ivl=100ms
I:  If#= 0 Alt= 8 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=sn9c102
E:  Ad=81(I) Atr=01(Isoc) MxPS=1023 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=83(I) Atr=03(Int.) MxPS=   1 Ivl=100ms

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.15-23-386 uhci_hcd
S:  Product=UHCI Host Controller
S:  SerialNumber=0000:00:10.0
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms
lyncoln@lyncoln-desktop:~$


lyncoln@lyncoln-desktop:~$ lsmod
Module                  Size  Used by
ipt_limit               2432  8
iptable_mangle          2944  0
ipt_LOG                 6912  8
ipt_MASQUERADE          3456  0
ip_nat                 19628  1 ipt_MASQUERADE
ipt_TOS                 2560  0
ipt_REJECT              5632  1
ip_conntrack_irc        6768  0
ip_conntrack_ftp        7792  0
ipt_state               2048  6
ip_conntrack           51500  5 ipt_MASQUERADE,ip_nat,ip_conntrack_irc,ip_conntrack_ftp,ipt_state
nfnetlink               6552  2 ip_nat,ip_conntrack
iptable_filter          3072  1
ip_tables              22400  8 ipt_limit,iptable_mangle,ipt_LOG,ipt_MASQUERADE,ipt_TOS,ipt_REJECT,ipt_state,iptable_filter
ppp_deflate             6272  0
zlib_deflate           24344  1 ppp_deflate
bsd_comp                6272  0
ppp_async              11904  1
ppp_generic            30100  7 ppp_deflate,bsd_comp,ppp_async
slhc                    7424  1 ppp_generic
ipv6                  265600  8
rfcomm                 40216  0
l2cap                  26244  5 rfcomm
bluetooth              49892  4 rfcomm,l2cap
ppdev                   9220  0
cpufreq_powersave       1920  0
cpufreq_stats           5636  0
cpufreq_userspace       4696  0
cpufreq_ondemand        6428  0
cpufreq_conservative     7332  0
freq_table              4740  1 cpufreq_stats
tc1100_wmi              6916  0
video                  16260  0
acpi_sbs               19980  0
battery                 9988  1 acpi_sbs
i2c_acpi_ec             5120  1 acpi_sbs
container               4608  0
button                  6672  0
pcc_acpi               12416  0
sony_acpi               5644  0
ac                      5252  1 acpi_sbs
dev_acpi               11140  0
hotkey                 11556  0
dm_mod                 58936  1
md_mod                 72532  0
af_packet              22920  2
lp                     11844  0
sn9c102                87180  0
videodev                9856  1 sn9c102
snd_seq_dummy           3844  0
snd_seq_oss            33536  0
snd_seq_midi            9376  0
snd_seq_midi_event      7552  2 snd_seq_oss,snd_seq_midi
i2c_viapro              8980  0
snd_seq                51984  6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
tsdev                   8000  0
parport_pc             35780  1
parport                36296  3 ppdev,lp,parport_pc
via_rhine              23940  0
via_ircc               26900  0
pcspkr                  2180  0
irda                  186940  1 via_ircc
mii                     5888  1 via_rhine
crc_ccitt               2304  2 ppp_async,irda
analog                 12320  0
floppy                 62148  0
snd_via82xx            28824  1
gameport               15496  2 analog,snd_via82xx
snd_ac97_codec         92704  1 snd_via82xx
snd_ac97_bus            2304  1 snd_ac97_codec
snd_pcm_oss            53664  0
snd_mixer_oss          18688  1 snd_pcm_oss
snd_pcm                89864  3 snd_via82xx,snd_ac97_codec,snd_pcm_oss
snd_timer              25220  2 snd_seq,snd_pcm
snd_page_alloc         10632  2 snd_via82xx,snd_pcm
snd_mpu401_uart         7808  1 snd_via82xx
snd_rawmidi            25504  2 snd_seq_midi,snd_mpu401_uart
snd_seq_device          8716  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq,snd_rawmidi
snd                    55268  13 snd_seq_oss,snd_seq,snd_via82xx,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
psmouse                36228  0
serio_raw               7300  0
rtc                    13492  0
via_agp                 9856  1
soundcore              10208  1 snd
nvidia               4550772  12
agpgart                34888  2 via_agp,nvidia
i2c_core               21904  3 i2c_acpi_ec,i2c_viapro,nvidia
slamr                 434344  2
shpchp                 45632  0
pci_hotplug            29236  1 shpchp
evdev                   9856  1
reiserfs              268016  2
ide_generic             1536  0
ehci_hcd               32008  0
uhci_hcd               33680  0
usbcore               129668  4 sn9c102,ehci_hcd,uhci_hcd
ide_cd                 33028  0
cdrom                  38560  1 ide_cd
ide_disk               17664  4
generic                 5124  0
via82cxxx               9988  0 [permanent]
thermal                13576  0
processor              23360  1 thermal
fan                     4868  0
capability              5000  0
commoncap               7296  1 capability
vga16fb                13704  1
vgastate               10368  1 vga16fb
fbcon                  42784  72
tileblit                2816  1 fbcon
font                    8320  1 fbcon
bitblit                 6272  1 fbcon
softcursor              2304  1 bitblit
lyncoln@lyncoln-desktop:~$

lyncoln@lyncoln-desktop:~$ lsusb
Bus 004 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 002: ID 0c45:602c Microdia Clas Ohlson TWC-30XOP WebCam
Bus 002 Device 001: ID 0000:0000
lyncoln@lyncoln-desktop:~$

lyncoln@lyncoln-desktop:~$ dmesg | grep usb
[4294676.118000] usbcore: registered new driver usbfs
[4294676.119000] usbcore: registered new driver hub
[4294677.280000] usb 2-2: new full speed USB device using uhci_hcd and address 2[4294689.195000] usb 2-2: SN9C10[12] PC Camera Controller detected (vid/pid 0x0C45/0x602C)
[4294689.255000] usb 2-2: OV7630 image sensor detected
[4294689.402000] usb 2-2: Initialization succeeded
[4294689.402000] usb 2-2: V4L2 device registered as /dev/video0
[4294689.402000] usb 2-2: Optional device control through 'sysfs' interface ready
[4294689.402000] usbcore: registered new driver sn9c102
lyncoln@lyncoln-desktop:~$

desculpem o texto longo e obrigado pela atenção!

[RC2006]

Bus 002 Device 002: ID 0c45:602c Microdia Clas Ohlson TWC-30XOP WebCam
sn9c102                87180  0
videodev                9856  1 sn9c102

Aparentemente tudo bem! Talvez algum conflito!
Põe também o nome comercial da sua webcam
Se pegava no breezy, deve pegar no dapper!
Talvez uma lida melhor neste link, possa ajuda-lo:
http://www.ubuntuforum-pt.org/index.php?topic=5352&start=0
Tem algumas dicas como a instalação do easycam/easycam2 que só funciona com algumas, mas vale como alternativa.
O ideal seria fazer uma instalação limpa, isto é, sem já ter tentado instalar por outros métodos anteriormente...
boa sorte.

[Servo]

Obrigado pela resposta. Eu já usei o easycam, o 2 ainda não. Acho q o problema está neste v4l2, pois só o gnomemeeting reconhece através deste v4l2. Como os outros programas são baseados no v4l, a imagem não abre. No amsn, a webcam é reconhecida, mas não gera chanel, e então não tem imagem. Bom, o nome comercial dela é Webcam Netgate.


lyncoln@lyncoln-desktop:~$ xawtv -hwscan
This is xawtv-3.94, running on Linux/i686 (2.6.15-23-386)
looking for available devices
port 244-244
   type : Xvideo, image scaler
   name : NV17 Video Overlay

port 245-245
   type : Xvideo, image scaler
   name : NV17 Video Texture

port 246-277
   type : Xvideo, image scaler
   name : NV05 Video Blitter

port 278-278                            [ -xvport 278 ]
   type : Xvideo, video overlay
   name : NVIDIA Video Interface Port

/dev/video0: OK                         [ -device /dev/video0 ]
   type : v4l2
   name : SN9C10x PC Camera
   flags:  capture

lyncoln@lyncoln-desktop:~$

[Servo]

Desinstalei o easycam e instalei o easycam 2 ,agora estou com 2 drivers

lyncoln@lyncoln-desktop:~$ dmesg | grep usb
[4294676.441000] usbcore: registered new driver usbfs
[4294676.442000] usbcore: registered new driver hub
[4294677.603000] usb 2-1: new full speed USB device using uhci_hcd and address 2[4294688.359000] usb 2-1: SN9C10[12] PC Camera Controller detected (vid/pid 0x0C45/0x602C)
[4294688.418000] usb 2-1: OV7630 image sensor detected
[4294688.650000] usb 2-1: Initialization succeeded
[4294688.650000] usb 2-1: V4L2 device registered as /dev/video0
[4294688.650000] usb 2-1: Optional device control through 'sysfs' interface ready
[4294688.650000] usbcore: registered new driver sn9c102
[4303588.572000] usbcore: registered new driver spca5xx
[4303588.572000] /home/lyncoln/l/Programas/Webcam/spca5xx-20060501/drivers/usb/spca5xx.c: spca5xx driver 00.60.00 registered
lyncoln@lyncoln-desktop:~$

[Servo]

Alguém pode me ajudar?

[Servo]

up