server 10.04 sem acesso à rede

[fellipeh]

Amigos, acabo de instalar o Server 10.04, porém não consigo sair para rede interna, muito menos pra internet...

meu interfaces está assim:
auto eth0
iface eth0 inet static
address 192.168.1.10
netmask 255.255.255.0
network 192.168.1.0
broadcast 192.168.1.255
gateway 192.168.1.1

não consigo pingar nenhuma maquina da rede interna...

já usei até o route add

route add -net default gw 192.168.1.1

e nada... continua sem sair do local...

o que estou perdendo?

OBrigado..

[libonati]

Acrescente no arquivo

auto lo
iface lo inet loopback....

[fellipeh]

desculpe amigo, na hora de copiar, esqueci dessas linhas, elas já se encontram lá..

Tá assim:

auto lo
iface lo inet loopback

auto eth0
iface eth0 inet static
address 192.168.1.10
netmask 255.255.255.0
network 192.168.1.0
broadcast 192.168.1.255
gateway 192.168.1.1

O mais estranho que não pinga nada... nenhuma máquina, o cabo está ok.. tirei de outra maquina usando windows e funcionava.. a placa está correta, no ifconfig, aparece as informações dela.. e lspci também aparece ela..

o que será que estou errando heim!?

[libonati]

É dificil o fórum responder sem dados para juízo de valor.
Tenta alinhar as coisas em conexões de rede.

[zekkerj]

Qual é a sua placa de rede? Tem certeza de que ela está funcionando? E o cabo?

[fellipeh]

Olá, desculpe a demora é que agora que consegui voltar à empresa...

Bom, acredito que a placa esteja funcionando, pois na instalação do server, ele me informou que tinha 2 placas.. e em qual era a primária, o que escolhi a on-board... depois não consigo mais reconhecer a outra...

Segue meu lspci:

Código Selecionar Expandir


[    0.756983] Freeing initrd memory: 7725k freed
[    0.851283] isapnp: No Plug & Play device found
[    0.851298] Freeing unused kernel memory: 676k freed
[    0.852001] Write protecting the kernel text: 4836k
[    0.852070] Write protecting the kernel read-only data: 1880k
[    0.876669] udev: starting version 151
[    1.075654] sata_via 0000:00:0f.0: version 2.4
[    1.075674] sata_via 0000:00:0f.0: PCI INT B -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20
[    1.075723] sata_via 0000:00:0f.0: routed to hard irq line 11
[    1.089665] scsi0 : sata_via
[    1.095023] scsi1 : sata_via
[    1.095105] ata1: SATA max UDMA/133 cmd 0x9400 ctl 0x9800 bmdma 0xa400 irq 20
[    1.095109] ata2: SATA max UDMA/133 cmd 0x9c00 ctl 0xa000 bmdma 0xa408 irq 20
[    1.095166] pata_via 0000:00:0f.1: version 0.3.4
[    1.095180] pata_via 0000:00:0f.1: PCI INT A -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20
[    1.101757] Floppy drive(s): fd0 is 1.44M
[    1.102791] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    1.103049] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[    1.103231] scsi2 : pata_via
[    1.103382] scsi3 : pata_via
[    1.104938] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xac00 irq 14
[    1.104942] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xac08 irq 15
[    1.105019] 8139cp 0000:00:0b.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[    1.105342] ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 23
[    1.105345] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
[    1.105350]   alloc irq_desc for 23 on node -1
[    1.105353]   alloc kstat_irqs on node -1
[    1.105361] via-rhine 0000:00:12.0: PCI INT A -> Link[ALKD] -> GSI 23 (level, low) -> IRQ 23
[    1.106112] eth0: VIA Rhine II at 0xea002000, 00:0f:ea:d6:ad:df, IRQ 23.
[    1.106819] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
[    1.119902] FDC 0 is a post-1991 82077
[    1.276358] ata3.01: ATAPI: HL-DT-ST DVDRAM GSA-H12N, UL02, max UDMA/66
[    1.276389] ata3.01: limited to UDMA/33 due to 40-wire cable
[    1.292238] ata3.01: configured for UDMA/33
[    1.296010] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.460298] ata1.00: ATA-7: SAMSUNG HD080HJ/P, ZH100-41, max UDMA7
[    1.460302] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.492318] ata1.00: configured for UDMA/133
[    1.492445] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD080HJ/ ZH10 PQ: 0 ANSI: 5
[    1.492636] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.492937] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    1.492990] sd 0:0:0:0: [sda] Write Protect is off
[    1.492994] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.493021] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.493175]  sda: sda1 sda2 < sda5 >
[    1.520952] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.696013] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[    1.710393] scsi 2:0:1:0: CD-ROM            HL-DT-ST DVDRAM GSA-H12N  UL02 PQ: 0 ANSI: 5
[    1.722661] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.722666] Uniform CD-ROM driver Revision: 3.20
[    1.722965] sr 2:0:1:0: Attached scsi CD-ROM sr0
[    1.723108] sr 2:0:1:0: Attached scsi generic sg1 type 5
[    1.894649] 8139too Fast Ethernet driver 0.9.28
[    1.894694]   alloc irq_desc for 19 on node -1
[    1.894697]   alloc kstat_irqs on node -1
[    1.894706] 8139too 0000:00:0b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    1.910137] eth1: RealTek RTL8139 at 0x9000, ff:ff:ff:ff:ff:ff, IRQ 19
[    2.130781] EXT4-fs (sda1): mounted filesystem with ordered data mode
[    8.706598] Adding 1300472k swap on /dev/sda5.  Priority:-1 extents:1 across:1300472k
[    8.726036] udev: starting version 151
[    8.938666] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    9.064485] Linux agpgart interface v0.103
[    9.103345] parport_pc 00:0b: reported by Plug and Play ACPI
[    9.103390] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[    9.118006] lp: driver loaded but no devices found
[    9.190558] vga16fb: initializing
[    9.190563] vga16fb: mapped to 0xc00a0000
[    9.190644] fb0: VGA16 VGA frame buffer device
[    9.192229] lp0: using parport0 (interrupt-driven).
[    9.196881] ppdev: user-space parallel port driver
[    9.197135] agpgart-amd64 0000:00:00.0: AGP bridge [1106/0204]
[    9.225868] agpgart-amd64 0000:00:00.0: AGP aperture is 64M @ 0xe0000000
[    9.257327] type=1505 audit(1292939241.446:2):  operation="profile_load" pid=530 name="/sbin/dhclient3"
[    9.257681] type=1505 audit(1292939241.446:3):  operation="profile_load" pid=530 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[    9.257879] type=1505 audit(1292939241.446:4):  operation="profile_load" pid=530 name="/usr/lib/connman/scripts/dhclient-script"
[    9.508785] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
[    9.508789] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[    9.508795]   alloc irq_desc for 22 on node -1
[    9.508797]   alloc kstat_irqs on node -1
[    9.508805] VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[ALKC] -> GSI 22 (level, low) -> IRQ 22
[    9.508963] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
[    9.537772] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[    9.656432] Console: switching to colour frame buffer device 80x30
[    9.828061] type=1505 audit(1292939242.018:5):  operation="profile_replace" pid=690 name="/sbin/dhclient3"
[    9.836630] type=1505 audit(1292939242.026:6):  operation="profile_replace" pid=690 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[    9.836843] type=1505 audit(1292939242.026:7):  operation="profile_replace" pid=690 name="/usr/lib/connman/scripts/dhclient-script"
[    9.868492] type=1505 audit(1292939242.058:8):  operation="profile_load" pid=695 name="/usr/lib/cups/backend/cups-pdf"
[    9.868941] type=1505 audit(1292939242.058:9):  operation="profile_load" pid=695 name="/usr/sbin/cupsd"
[    9.873733] type=1505 audit(1292939242.062:10):  operation="profile_load" pid=699 name="/usr/sbin/mysqld"
[    9.879834] type=1505 audit(1292939242.066:11):  operation="profile_load" pid=701 name="/usr/sbin/named"
[   20.252007] eth0: no IPv6 routers present
[  993.130258] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[  993.135140] SGI XFS Quota Management subsystem
[  993.147065] JFS: nTxBlock = 3470, nTxLock = 27762
[  993.178689] NTFS driver 2.1.29 [Flags: R/O MODULE].
[  993.208951] QNX4 filesystem 0.2.3 registered.
[  993.258347] Btrfs loaded
[ 1110.539758] __ratelimit: 6 callbacks suppressed
[ 1110.539763] type=1505 audit(1292940342.714:14):  operation="profile_replace" pid=5464 name="/usr/lib/cups/backend/cups-pdf"
[ 1110.540567] type=1505 audit(1292940342.715:15):  operation="profile_replace" pid=5464 name="/usr/sbin/cupsd"
[ 1167.792128] type=1505 audit(1292940399.967:16):  operation="profile_replace" pid=9918 name="/usr/sbin/mysqld"
[ 1167.917798] type=1505 audit(1292940400.091:17):  operation="profile_replace" pid=9923 name="/usr/sbin/mysqld"
[ 1172.933090] udev: starting version 151
[ 1176.314395] type=1505 audit(1292940408.487:18):  operation="profile_replace" pid=10254 name="/sbin/dhclient3"
[ 1176.314585] type=1505 audit(1292940408.487:19):  operation="profile_replace" pid=10254 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 1176.314690] type=1505 audit(1292940408.487:20):  operation="profile_replace" pid=10254 name="/usr/lib/connman/scripts/dhclient-script"
[ 1176.724575] type=1505 audit(1292940408.899:21):  operation="profile_replace" pid=10255 name="/usr/lib/cups/backend/cups-pdf"
[ 1176.724890] type=1505 audit(1292940408.899:22):  operation="profile_replace" pid=10255 name="/usr/sbin/cupsd"
[ 1176.850345] type=1505 audit(1292940409.023:23):  operation="profile_replace" pid=10256 name="/usr/sbin/mysqld"
[ 1176.966218] type=1505 audit(1292940409.139:24):  operation="profile_replace" pid=10257 name="/usr/sbin/named"
[ 1177.090607] type=1505 audit(1292940409.263:25):  operation="profile_replace" pid=10258 name="/usr/sbin/tcpdump"
[ 1177.370971] type=1505 audit(1292940409.543:26):  operation="profile_replace" pid=10294 name="/sbin/dhclient3"
[ 1177.371161] type=1505 audit(1292940409.543:27):  operation="profile_replace" pid=10294 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 1181.321502] __ratelimit: 18 callbacks suppressed
[ 1181.321507] type=1505 audit(1292940413.495:34):  operation="profile_replace" pid=10397 name="/usr/sbin/named"
root@linserver:~# lspci | more
00:00.0 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.1 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.7 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 Sout
h]
00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139
C+ (rev 10)
00:0f.0 IDE interface: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (r
ev 80)
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/
C PIPC Bus Master IDE (rev 06)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
(rev 81)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
(rev 81)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
(rev 81)
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
(rev 81)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T89
0 South]
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 A
C97 Audio Controller (rev 60)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTra
nsport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address
Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Con
troller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscella
neous Control
01:00.0 VGA compatible controller: VIA Technologies, Inc. K8M800/K8N800/K8N800A
[S3 UniChrome Pro] (rev 01)
root@linserver:~# lspci | more
00:00.0 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.1 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.7 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 Sout
h]
00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139
C+ (rev 10)
00:0f.0 IDE interface: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (r
ev 80)
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/
C PIPC Bus Master IDE (rev 06)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
(rev 81)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
(rev 81)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
(rev 81)
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
(rev 81)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T89


A segunda placa é a Realtek... mas não aparece no eth1...

[]s

[zekkerj]

Execute os comandos abaixo e cole o resultado aqui.

sudo lshw -C network

ifconfig -a

nm-tool

lspci

[zekkerj]

Bom, acredito que a placa esteja funcionando, pois na instalação do server, ele me informou que tinha 2 placas.. e em qual era a primária, o que escolhi a on-board... depois não consigo mais reconhecer a outra...

Veja só, o fato da placa ser detectada não garante que ela esteja funcionando.

[fellipeh]

Sim,  sei que detectada não quer dizer funcionando.. mas pelo menos o ubuntu server encontrou a placa em si...  

Segue os resultados dos comandos:

root@linserver:~# lshw -C network

Código Selecionar Expandir


 *-network:0 DISABLED
      description: Ethernet interface
      product: RTL-8139/8139C/8139C+
      vendor: Realtek Semiconductor Co., Ltd.
      physical id: a
      bus info: pci@0000:00:0a.0
      logical name: eth1
      version: 10
      serial: ff:ff:ff:ff:ff:ff
      size: 10MB/s
      capacity: 100MB/s
      width: 32 bits
      clock: 33MHz
      capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
      configuration: autonegotiation=on broadcast=yes driver=8139too driverversion=0.9.28 duplex=half latency=32 link=no maxlatency=64 mingnt=32 multicast=yes port=MII speed=10MB/s
      resources: irq:18 ioport:9000(size=256) memory:ea000000-ea0000ff
 *-network:1
      description: Ethernet interface
      product: VT6102 [Rhine-II]
      vendor: VIA Technologies, Inc.
      physical id: 12
      bus info: pci@0000:00:12.0
      logical name: eth0
      version: 78
      serial: 00:0f:ea:d6:ad:df
      size: 100MB/s
      capacity: 100MB/s
      width: 32 bits
      clock: 33MHz
      capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
      configuration: autonegotiation=on broadcast=yes driver=via-rhine driverversion=1.4.3 duplex=full ip=192.168.1.28 latency=64 link=yes maxlatency=8 mingnt=3 multicast=yes port=MII speed=100MB/s
      resources: irq:23 ioport:c400(size=256) memory:ea002000-ea0020ff
root@linserver:~#


root@linserver:~# ifconfig -a

Código Selecionar Expandir


eth0      Link encap:Ethernet  HWaddr 00:0f:ea:d6:ad:df
         inet addr:192.168.1.28  Bcast:192.168.1.255  Mask:255.255.255.0
         inet6 addr: fe80::20f:eaff:fed6:addf/64 Scope:Link
         UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
         RX packets:302 errors:0 dropped:0 overruns:0 frame:0
         TX packets:267 errors:0 dropped:0 overruns:0 carrier:0
         collisions:0 txqueuelen:1000
         RX bytes:28202 (28.2 KB)  TX bytes:36841 (36.8 KB)
         Interrupt:23 Base address:0x6000

eth1      Link encap:Ethernet  HWaddr ff:ff:ff:ff:ff:ff
         BROADCAST MULTICAST  MTU:1500  Metric:1
         RX packets:0 errors:0 dropped:0 overruns:0 frame:0
         TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
         collisions:0 txqueuelen:1000
         RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
         Interrupt:18 Base address:0x9000

lo        Link encap:Local Loopback
         inet addr:127.0.0.1  Mask:255.0.0.0
         inet6 addr: ::1/128 Scope:Host
         UP LOOPBACK RUNNING  MTU:16436  Metric:1
         RX packets:24 errors:0 dropped:0 overruns:0 frame:0
         TX packets:24 errors:0 dropped:0 overruns:0 carrier:0
         collisions:0 txqueuelen:0
         RX bytes:2000 (2.0 KB)  TX bytes:2000 (2.0 KB)

root@linserver:~#


root@linserver:~# nm-tool

Código Selecionar Expandir


NetworkManager Tool

State: unknown


** (process:2904): WARNING **: error: could not connect to NetworkManager
root@linserver:~#



root@linserver:~# lspci

Código Selecionar Expandir


00:00.0 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.1 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.7 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South]
00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
00:0f.0 IDE interface: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 VGA compatible controller: VIA Technologies, Inc. K8M800/K8N800/K8N800A [S3 UniChrome Pro] (rev 01)
root@linserver:~#


[zekkerj]

Olha só, essa placa RTL8139 me parece estar com defeito. Tente trocá-la.

[fellipeh]

Boa noite, irei fazer isso amanhã, e posto o resultado.

obrigado.

[]s