Ubuntu10.10 não reconhece pen-drive nem no lsusb

[luanpl92]

Iniciante com um problema, coloco qualquer pen-drive, e ele não reconhece. Coloco outros periféricos USB (mouse, teclado) e ele roda normalmente.
Aqui vai o que apareceu no lsusb

Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 123: ID 15d9:0a4c Trust International B.V.
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


Já tem outros tópicos semelhantes, mas para mim, não foi resolvido, por isso criei este. Por favor, quando forem tentar me ajudar, sejam o mais detalhistas possíveis, faz menos de uma semana que passei a usar o ubuntu. E tenham paciêcia. 
Grato pela atenção.

[irtigor]

Esse "Trust International B.V. " é o que?

Código Selecionar Expandir


ls /media/


Código Selecionar Expandir


gconftool-2 -g /apps/nautilus/preferences/media_automount_open


Código Selecionar Expandir


sudo lshw -C disk


Código Selecionar Expandir


mount

Copia e cola no terminal. Coloque as saídas aqui.

---
Plugue o pendrive antes.

[luanpl92]

Depois que eu fiz cada linha que vc pediu, apareceu isso. Se eu tiver feito certo né

Código Selecionar Expandir


luan@Luan-Ubuntu10:~$ ls /media/
sdb1
luan@Luan-Ubuntu10:~$ gconftool-2 -g /apps/nautilus/preferences/media_automount_open
true
luan@Luan-Ubuntu10:~$ sudo lshw -C disk
PCI (sysfs)
mount
*-disk                  
      description: ATA Disk
      product: HTS541080G9AT00
      vendor: Hitachi
      physical id: 0.0.0
      bus info: scsi@0:0.0.0
      logical name: /dev/sda
      version: MB4O
      serial: MP28XBXBH4DHVS
      size: 74GiB (80GB)
      capabilities: partitioned partitioned:dos
      configuration: ansiversion=5 signature=0007fc18
 *-cdrom
      description: DVD-RAM writer
      product: DVD-RAM UJ-850S
      vendor: MATSHITA
      physical id: 0.1.0
      bus info: scsi@0:0.1.0
      logical name: /dev/cdrom
      logical name: /dev/cdrw
      logical name: /dev/dvd
      logical name: /dev/dvdrw
      logical name: /dev/scd0
      logical name: /dev/sr0
      version: 1.50
      capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram
      configuration: ansiversion=5 status=nodisc
luan@Luan-Ubuntu10:~$
luan@Luan-Ubuntu10:~$ mount
/dev/sda1 on / type ext4 (rw,errors=remount-ro,commit=0)
proc on /proc type proc (rw,noexec,nosuid,nodev)
none on /sys type sysfs (rw,noexec,nosuid,nodev)
fusectl on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /dev type devtmpfs (rw,mode=0755)
none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
none on /dev/shm type tmpfs (rw,nosuid,nodev)
none on /var/run type tmpfs (rw,nosuid,mode=0755)
none on /var/lock type tmpfs (rw,noexec,nosuid,nodev)
none on /var/lib/ureadahead/debugfs type debugfs (rw,relatime)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
gvfs-fuse-daemon on /home/luan/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=luan)


[irtigor]

E o "Trust International B.V. " é o que? É um teclado/mouse? E essa pasta sdb1 lá em /media? Está usando ndiswrapper?

Espeta e roda esses comandos

Código Selecionar Expandir

dmesg | tail -50

Código Selecionar Expandir

lsmod | egrep '*_hcd|usb'

Não tem nenhum sinal desse pendrive... tem certeza que ele funciona? É um pendrive mesmo, ou um mp3player?

[luanpl92]

Código Selecionar Expandir


dmesg | tail -50
[   15.369177] uhci_hcd 0000:07:00.0: irq 20, io base 0x0000a400
[   15.369346] hub 4-0:1.0: USB hub found
[   15.369352] hub 4-0:1.0: 2 ports detected
[   15.369489] uhci_hcd 0000:07:00.1: enabling device (0000 -> 0003)
[   15.369498] uhci_hcd 0000:07:00.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[   15.369510] uhci_hcd 0000:07:00.1: UHCI Host Controller
[   15.369557] uhci_hcd 0000:07:00.1: new USB bus registered, assigned bus number 5
[   15.369592] uhci_hcd 0000:07:00.1: irq 20, io base 0x0000a420
[   15.369747] hub 5-0:1.0: USB hub found
[   15.369752] hub 5-0:1.0: 2 ports detected
[   15.369882] ehci_hcd 0000:07:00.2: enabling device (0000 -> 0002)
[   15.369890] ehci_hcd 0000:07:00.2: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[   15.369917] ehci_hcd 0000:07:00.2: EHCI Host Controller
[   15.369967] ehci_hcd 0000:07:00.2: new USB bus registered, assigned bus number 6
[   15.370027] ehci_hcd 0000:07:00.2: irq 20, io mem 0x84000200
[   15.380059] ehci_hcd 0000:07:00.2: USB 2.0 started, EHCI 1.00
[   15.381088] hub 6-0:1.0: USB hub found
[   15.381099] hub 6-0:1.0: 4 ports detected
[   15.410104] [drm] fb mappable at 0xC8040000
[   15.410109] [drm] vram apper at 0xC8000000
[   15.410111] [drm] size 4096000
[   15.410113] [drm] fb depth is 24
[   15.410115] [drm]    pitch is 5120
[   15.505301] Console: switching to colour frame buffer device 160x50
[   15.515538] fb0: radeondrmfb frame buffer device
[   15.515541] drm: registered panic notifier
[   15.592196] Slow work thread pool: Starting up
[   15.595403] Slow work thread pool: Ready
[   15.595416] [drm] Initialized radeon 2.5.0 20080528 for 0000:01:05.0 on minor 0
[   15.743141] ppdev: user-space parallel port driver
[   15.831840] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[   15.936770] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   18.720608] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[   18.730669] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   22.772362] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[   29.608039] eth0: no IPv6 routers present
[  278.943186] lo: Disabled Privacy Extensions
[ 3971.128713] show_signal_msg: 9 callbacks suppressed
[ 3971.128719] chrome[1795]: segfault at 183b8e5c ip 183b8e5c sp 183b8e5c error 4
[ 5477.883885] hub 2-0:1.0: port 3 disabled by hub (EMI?), re-enabling...
[ 5477.883902] usb 2-3: USB disconnect, address 2
[ 5478.188093] usb 2-3: new low speed USB device using ohci_hcd and address 4
[ 5478.403286] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:13.0/usb2/2-3/2-3:1.0/input/input10
[ 5478.403856] generic-usb 0003:15D9:0A4C.0004: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:13.0-3/input0
[ 6336.576863] chrome[2601] general protection ip:10e77cf sp:f168dccd error:0 in libc-2.12.1.so[10bd000+157000]
[ 7924.591446] indicator-appli[1653]: segfault at 3536313a ip 01035158 sp bf96484c error 4 in libc-2.12.1.so[fc1000+157000]
[ 7984.221054] brasero[3604]: segfault at 4cf2f8bf ip 005d9202 sp bfe7c930 error 4 in libgobject-2.0.so.0.2600.0[5b0000+40000]
[ 8004.525080] brasero[3653]: segfault at 34 ip 00a546c1 sp b640dd68 error 4 in libc-2.12.1.so[94b000+157000]
[ 8030.614378] brasero[3658]: segfault at 34 ip 04df96c1 sp b64b1d68 error 4 in libc-2.12.1.so[4cf0000+157000]
[ 9448.139992] brasero[3696]: segfault at 4cf2fe77 ip 009c8202 sp bfa53700 error 4 in libgobject-2.0.so.0.2600.0[99f000+40000]

lsmod | egrep '*_hcd|usb'

Código Selecionar Expandir

usbhid                 36882  0
hid                    67742  1 usbhid
luan@Luan-Ubuntu10:~$


[irtigor]

Tem algum sinal, mas os módulos... Tenta

Remova o pendrive, copie e cole:

Código Selecionar Expandir


sudo modprobe -v ehci_hcd
sudo modprobe -v uhci_hcd
sudo modprobe -v usb_storage

Depois

Código Selecionar Expandir


lsmod | egrep '*_hcd|usb'


Pluge o pendrive e veja se funciona. Se não funcionar, cole as saídas aqui; se funcionar coloque eles no /etc/modules.

Obs: e as respostas? Elas ajudariam a isolar o problema.

[luanpl92]

sudo modprobe -v ehci_hcd
sudo modprobe -v uhci_hcd
sudo modprobe -v usb_storage

Código Selecionar Expandir

insmod /lib/modules/2.6.35-23-generic/kernel/drivers/usb/storage/usb-storage.ko


lsmod | egrep '*_hcd|usb'

Código Selecionar Expandir

usb_storage            40172  0
usbhid                 36882  0
hid                    67742  1 usbhid


caramba, ainda num deu certo..