Configura o modem movel ONDA MSA110UP da TIM no ubuntu 9.10

zekkerj · 29 de Novembro de 2010, 19:30

Vamos também preparar pra testar sua conexão via wvdial.

Instale o pacote "wvdial" ("apt-get install wvdial").

Depois, crie o arquivo "/etc/wvdial.conf" com o conteúdo abaixo.

Citar
[Dialer Defaults]
Modem Type = Analog Modem
Baud = 3600000
New PPPD = yes
Modem = /dev/ttyUSB2
Init1 = ATZ
Init2=AT +CFUN=0
Init3 = ATQ0 V1 E1
#Init4 = AT S0=0
#Init5 = ATQ0 &C1 &D2
Init8 = AT +FCLASS=0
Init9 = AT+CGDCONT=1,"IP","www.tim.com.br"
ISDN = 0
; Phone = <Target Phone Number>
; Password = <Your Password>
; Username = <Your Login Name>
Phone = *99***1#
Username = Tim
Password = tim
Stupid Mode = 1
ISDN = 0

[Dialer TimWeb]
Modem = /dev/ttyUSB0

[Dialer TimWeb1]
Modem = /dev/ttyUSB1

[Dialer TimWeb2]
Modem = /dev/ttyUSB2

[Dialer TimWeb3]
Modem = /dev/ttyUSB3

Esse arquivo, da forma como está, está calibrado pro meu modem. Fiz uma alteração, pra gente poder testar as portas do seu modem.

Depois de criar o arquivo, execute o comando

sudo wvdial TimWeb2

Veja se conecta. Se não conectar, tente os outros (TimWeb1, TimWeb3 e TimWeb0). Assim nós vamos descobrir com certeza a porta do seu modem.

Feito isso, vc já vai poder conectar via comando; fica faltando só a gente descobrir como configurar pra conectar diretamente do NM.

Cálcio · 29 de Novembro de 2010, 19:39

Todos eles ñ conectaram porém o TimWeb03 teve uma msg difente...

Código Selecionar


pc@pc-desktop:~$ sudo wvdial TimWeb2
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
--> Sending: ATQ0
--> Re-Sending: ATZ
--> Modem not responding.
pc@pc-desktop:~$ sudo wvdial TimWeb1
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
--> Sending: ATQ0
--> Re-Sending: ATZ
--> Modem not responding.
pc@pc-desktop:~$ sudo wvdial TimWeb0
--> WvDial: Internet dialer version 1.60
--> Warning: section [Dialer TimWeb0] does not exist in wvdial.conf.
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
--> Sending: ATQ0
--> Re-Sending: ATZ
--> Modem not responding.
pc@pc-desktop:~$ sudo wvdial TimWeb3
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: AT +CFUN=0
AT +CFUN=0
OK
--> Sending: ATQ0 V1 E1
ATQ0 V1 E1
OK
--> Sending: AT +FCLASS=0
AT +FCLASS=0
OK
--> Sending: AT+CGDCONT=1,"IP","www.tim.com.br"
AT+CGDCONT=1,"IP","www.tim.com.br"
OK
--> Modem initialized.
--> Sending: ATDT*99***1#
--> Waiting for carrier.
ATDT*99***1#
ERROR
--> Invalid dial command.
--> Disconnecting at Mon Nov 29 19:37:12 2010

Uma pergunta para que, que serve esse wvdial?

zekkerj · 29 de Novembro de 2010, 21:36

Serve pra vc conectar uma conexão discada.

O modem 3G simula uma conexão discada, assim vc pode usar o wvdial pra fazer a conexão, e assim não precisamos depender do funcionamento do NM.

Lembra que fizemos, antes, um teste direto com o "modem-manager"? Gostaria de tentar isso de novo.

sudo killall -TERM modem-manager; sudo modem-manager --debug

Cálcio · 29 de Novembro de 2010, 21:48

Código Selecionar

killall -TERM modem-manager; sudo modem-manager --debug
** Message: Loaded plugin Option High-Speed
** Message: Loaded plugin Sierra
** Message: Loaded plugin Nokia
** Message: Loaded plugin ZTE
** Message: Loaded plugin Longcheer
** Message: Loaded plugin Ericsson MBM
** Message: Loaded plugin Gobi
** Message: Loaded plugin Option
** Message: Loaded plugin AnyData
** Message: Loaded plugin Huawei
** Message: Loaded plugin MotoC
** Message: Loaded plugin Generic
** Message: Loaded plugin Novatel
** Message: (ttyUSB0) opening serial device...
** (modem-manager:15655): DEBUG: (ttyUSB0): probe requested by plugin 'ZTE'
** Message: (ttyUSB1) opening serial device...
** (modem-manager:15655): DEBUG: (ttyUSB1): probe requested by plugin 'ZTE'
** Message: (ttyUSB2) opening serial device...
** (modem-manager:15655): DEBUG: (ttyUSB2): probe requested by plugin 'ZTE'
** Message: (ttyUSB3) opening serial device...
** (modem-manager:15655): DEBUG: (ttyUSB3): probe requested by plugin 'ZTE'
** (modem-manager:15655): DEBUG: (ttyUSB0): --> 'ATE0+CPMS?<CR>'
** (modem-manager:15655): DEBUG: (ttyUSB1): --> 'ATE0+CPMS?<CR>'
** (modem-manager:15655): DEBUG: (ttyUSB2): --> 'ATE0+CPMS?<CR>'
** (modem-manager:15655): DEBUG: (ttyUSB3): --> 'ATE0+CPMS?<CR>'
** (modem-manager:15655): DEBUG: (ttyUSB3): <-- '<CR><LF>+CPMS: "ME",3,100,"ME",3,100,"ME",3,100<CR><LF><CR><LF>OK<CR><LF>'
** (modem-manager:15655): DEBUG: (ttyUSB3): --> 'AT+GCAP<CR>'
** (modem-manager:15655): DEBUG: (ttyUSB0): --> 'ATE0+CPMS?<CR>'
** (modem-manager:15655): DEBUG: (ttyUSB3): <-- '<CR><LF>+GCAP: +CGSM,+DS,+ES<CR><LF><CR><LF>OK<CR><LF>'
** (modem-manager:15655): DEBUG: (ttyUSB1): --> 'ATE0+CPMS?<CR>'
** (modem-manager:15655): DEBUG: (ttyUSB3): <-- '<CR><LF>+ZMTime: 5;<CR><LF><CR><LF>+ZMTime: 5;<CR><LF>'
** Message: (ttyUSB3) closing serial device...
** (modem-manager:15655): DEBUG: (ttyUSB2): --> 'ATE0+CPMS?<CR>'
** Message: (ZTE): GSM modem /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1 claimed port ttyUSB3
** (modem-manager:15655): DEBUG: Added modem /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1
** (modem-manager:15655): DEBUG: (ttyUSB0): --> 'ATE0+CPMS?<CR>'
** (modem-manager:15655): DEBUG: (ttyUSB1): --> 'ATE0+CPMS?<CR>'
** (modem-manager:15655): DEBUG: (ttyUSB2): --> 'ATE0+CPMS?<CR>'
** (modem-manager:15655): DEBUG: (ttyUSB0): --> 'ATE0+CPMS?<CR>'
** (modem-manager:15655): DEBUG: (ttyUSB1): --> 'ATE0+CPMS?<CR>'
** (modem-manager:15655): DEBUG: (ttyUSB2): --> 'ATE0+CPMS?<CR>'
** Message: (ttyUSB0) closing serial device...
** Message: (ttyUSB1) closing serial device...
** Message: (ttyUSB2) closing serial device...

zekkerj · 29 de Novembro de 2010, 22:30

Seu modem está com o SIM, que está ativo, não? Vc já o utilizou em outra máquina ou SO, correto?

Cálcio · 29 de Novembro de 2010, 22:37

Eu já testei em um PC com Windows e conecta de boa sim.

zekkerj · 30 de Novembro de 2010, 10:23

OK. Seu modem já aparece no Gerenciador de Redes? Provavelmente haverá uma opção pra criar uma nova conexão com ele.

Cálcio · 30 de Novembro de 2010, 10:34

Sim ele identificou o modem pelo gerenciador de rede, até msm antes de instalar o wvdial, criei a conexão, qnd o estou com o modem plugado vejo a conexão criada.
Só que ao clicar ele tenta conectar e ñ conecta.

Isso com certeza é a configuração desse indivíduo, eu tinha visto em algum lugar a um tempo atrás (ótimas referências, ñ é? rs rs) , que a TIM havia mudado algumas configurações, porém ainda ñ as achei.

Só pra desencargo, com o modem Huawei eu ñ precisava desse wvdial, mas antes usava com o plano da Vivo.

zekkerj · 30 de Novembro de 2010, 10:43

Veja só, no Ubuntu, há uma opção de criar a conexão indicando a operadora. Dá uma fuçada pelo gerenciador de redes, vê se encontra.

Digo no Ubuntu pois no Kubuntu eu tenho que colocar essas informações por mim mesmo. As que eu uso são:
- Banda Larga Móvel
- Número: *99#
- Nome do usuário: tim
- Senha: tim
- APN: www.tim.com.br
- Tipo: 3G (UTMS/HSPA) (¹)
- PIN: <em branco> (²)
- PUK: <em branco> (²)
- PPP: Marcados: autenticação, PAP, CHAP, MSCHAPV2, MSCHAP, EAP, Permitir compressão BSD, Permitir compressão deflate, Usar compressão de cabeçalho TCP, Enviar pacotes de eco PPP.

(¹) - O assistente de conexão do Gerenciador de redes do Gnome (usado no Ubuntu) tem esse campo, mas é um campo de texto. Eu não sei qual é o valor a ser usado pra selecionar o tipo de rede, então sugiro que deixe em branco. No KDE, é uma lista predefinida, então é só selecionar.
(²) - PIN e PUK são proteções do seu SIM. Vc só vai usar se tiver selecionado isso em algum outro lugar, pois aqui nunca vi como ativar.

Cálcio · 30 de Novembro de 2010, 10:56

No meu caso mudei o APN e marquei o Enviar pacotes de eco PPP.
Não vi o ítem Tipo: 3G (UTMS/HSPA).

Uma pergunta...
Como tive que desinstalar o antigo usb-modeswitch e instalar o novo, precisaria criar aquele arquivo que vc falou em uns posts atras, o "/etc/usb_modeswitch.d/19d2:2000:uPr=ONDA_WCDMA_Technologies_MSM", pois ele ñ existe mais.

Vou tentar aqui fazer isso e te passar o comando tail -f /var/log/syslog

Cálcio · 30 de Novembro de 2010, 11:10

Código Selecionar

killall -TERM modem-manager ; modem-manager --debug
** Message: Loaded plugin Option High-Speed
** Message: Loaded plugin Sierra
** Message: Loaded plugin Nokia
** Message: Loaded plugin ZTE
** Message: Loaded plugin Longcheer
** Message: Loaded plugin Ericsson MBM
** Message: Loaded plugin Gobi
** Message: Loaded plugin Option
** Message: Loaded plugin AnyData
** Message: Loaded plugin Huawei
** Message: Loaded plugin MotoC
** Message: Loaded plugin Generic
** Message: Loaded plugin Novatel
** Message: (ttyUSB0) opening serial device...
** (modem-manager:8454): DEBUG: (ttyUSB0): probe requested by plugin 'ZTE'
** Message: (ttyUSB1) opening serial device...
** (modem-manager:8454): DEBUG: (ttyUSB1): probe requested by plugin 'ZTE'
** Message: (ttyUSB2) opening serial device...
** (modem-manager:8454): DEBUG: (ttyUSB2): probe requested by plugin 'ZTE'
** Message: (ttyUSB3) opening serial device...
** (modem-manager:8454): DEBUG: (ttyUSB3): probe requested by plugin 'ZTE'
** (modem-manager:8454): DEBUG: (ttyUSB3): <-- '<CR><LF>+ZSMSR: <CR><LF><CR><LF>+ZEND<CR><LF><CR><LF>+ZEND<CR><LF><CR><LF>+ZMTime: 5;<CR><LF><CR><LF>+ZMTime: 5;<CR><LF>'
** (modem-manager:8454): DEBUG: (ttyUSB3): <-- '<CR><LF>+ZEND<CR><LF><CR><LF>+ZEND<CR><LF><CR><LF>+ZMTime: 5;<CR><LF><CR><LF>+ZMTime: 5;<CR><LF><CR><LF>+ZEND<CR><LF>'
** (modem-manager:8454): DEBUG: (ttyUSB3): <-- '<CR><LF>+ZEND<CR><LF><CR><LF>+ZMTime: 5;<CR><LF><CR><LF>+ZMTime: 5;<CR><LF><CR><LF>+ZEND<CR><LF><CR><LF>+ZEND<CR><LF><CR><LF>+ZMTime: 5;<CR><LF><CR><LF>+ZMTime: 5;<CR><LF><CR><LF>+ZEND<CR><LF><CR><LF>+ZEND<CR><LF><CR><LF>+ZMTime: 5;<CR><LF><CR><LF>+ZMTime: 5;<CR><LF><CR><LF>+ZEND<CR><LF><CR><LF>+ZEND<CR><LF><CR><LF>+ZMTime: 5;<CR><LF><CR><LF>+ZMTime: 5;<CR><LF><CR><LF>+ZEND<CR><LF><CR><LF>+ZEND<CR><LF><CR><LF>+ZMTime: 5;<CR><LF><CR><LF>+ZMTime: 5;<CR><LF><CR><LF>+ZEND<CR><LF><CR><LF>+ZEND<CR><LF><CR><LF>+ZMTime: 5;<CR><LF><CR><LF>+ZMTime: 5;<CR><LF><CR><LF>+ZEND<CR><LF><CR><LF>+ZEND<CR><LF><CR><LF>+ZMTime: 5;<CR><LF><CR><LF>+ZMTime: 5;<CR><LF><CR><LF>+ZEND<CR><LF><CR><LF>+ZEND<CR><LF><CR><LF>+ZMTime: 5;<CR><LF><CR><LF>+ZMTime: 5;<CR><LF><CR><LF>+ZEND<CR><LF><CR><LF>+ZEND<CR><LF>'
** (modem-manager:8454): DEBUG: (ttyUSB0): --> 'ATE0+CPMS?<CR>'
** (modem-manager:8454): DEBUG: (ttyUSB1): --> 'ATE0+CPMS?<CR>'
** (modem-manager:8454): DEBUG: (ttyUSB2): --> 'ATE0+CPMS?<CR>'
** (modem-manager:8454): DEBUG: (ttyUSB3): --> 'ATE0+CPMS?<CR>'
** (modem-manager:8454): DEBUG: (ttyUSB3): <-- '<CR><LF>+CPMS: "ME",3,100,"ME",3,100,"ME",3,100<CR><LF><CR><LF>OK<CR><LF>'
** (modem-manager:8454): DEBUG: (ttyUSB3): --> 'AT+GCAP<CR>'
** (modem-manager:8454): DEBUG: (ttyUSB3): <-- '<CR><LF>+GCAP: +CGSM,+DS,+ES<CR><LF><CR><LF>OK<CR><LF>'
** (modem-manager:8454): DEBUG: (ttyUSB0): --> 'ATE0+CPMS?<CR>'
** Message: (ttyUSB3) closing serial device...
** (modem-manager:8454): DEBUG: (ttyUSB1): --> 'ATE0+CPMS?<CR>'
** Message: (ZTE): GSM modem /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-5 claimed port ttyUSB3
** (modem-manager:8454): DEBUG: Added modem /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-5
** (modem-manager:8454): DEBUG: (ttyUSB2): --> 'ATE0+CPMS?<CR>'
** (modem-manager:8454): DEBUG: (ttyUSB0): --> 'ATE0+CPMS?<CR>'
** (modem-manager:8454): DEBUG: (ttyUSB1): --> 'ATE0+CPMS?<CR>'
** (modem-manager:8454): DEBUG: (ttyUSB2): --> 'ATE0+CPMS?<CR>'
** (modem-manager:8454): DEBUG: (ttyUSB0): --> 'ATE0+CPMS?<CR>'
** (modem-manager:8454): DEBUG: (ttyUSB1): --> 'ATE0+CPMS?<CR>'
** (modem-manager:8454): DEBUG: (ttyUSB2): --> 'ATE0+CPMS?<CR>'
** Message: (ttyUSB0) closing serial device...
** Message: (ttyUSB1) closing serial device...
** Message: (ttyUSB2) closing serial device...
** (modem-manager:8454): DEBUG: Removing modem claimed by removed device /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-5
** (modem-manager:8454): DEBUG: Removed modem /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-5

** (modem-manager:8454): WARNING **: failed to marshal parameter 1 for signal DeviceRemoved
** Message: (ttyUSB1) opening serial device...
** (modem-manager:8454): DEBUG: (ttyUSB1): probe requested by plugin 'ZTE'
** Message: (ttyUSB0) opening serial device...
** (modem-manager:8454): DEBUG: (ttyUSB0): probe requested by plugin 'ZTE'
** Message: (ttyUSB2) opening serial device...
** (modem-manager:8454): DEBUG: (ttyUSB2): probe requested by plugin 'ZTE'
** Message: (ttyUSB3) opening serial device...
** (modem-manager:8454): DEBUG: (ttyUSB3): probe requested by plugin 'ZTE'
** (modem-manager:8454): DEBUG: (ttyUSB1): --> 'ATE0+CPMS?<CR>'
** (modem-manager:8454): DEBUG: (ttyUSB1): <-- 'ATE0+CPMS?<CR><CR><LF>ERROR<CR><LF>'
** (modem-manager:8454): DEBUG: Got failure code 100: Unknown error
** (modem-manager:8454): DEBUG: (ttyUSB1): --> 'ATE0+CPMS?<CR>'
** (modem-manager:8454): DEBUG: (ttyUSB0): --> 'ATE0+CPMS?<CR>'
** (modem-manager:8454): DEBUG: (ttyUSB2): --> 'ATE0+CPMS?<CR>'
** (modem-manager:8454): DEBUG: (ttyUSB3): --> 'ATE0+CPMS?<CR>'
** (modem-manager:8454): DEBUG: (ttyUSB1): <-- '<CR><LF>ERROR<CR><LF>'
** (modem-manager:8454): DEBUG: Got failure code 100: Unknown error
** (modem-manager:8454): DEBUG: (ttyUSB3): <-- '<CR><LF>ERROR<CR><LF>'
** (modem-manager:8454): DEBUG: Got failure code 100: Unknown error
** (modem-manager:8454): DEBUG: (ttyUSB1): --> 'ATE0+CPMS?<CR>'
** (modem-manager:8454): DEBUG: (ttyUSB3): --> 'ATE0+CPMS?<CR>'
** (modem-manager:8454): DEBUG: (ttyUSB1): <-- '<CR><LF>+ZPSTM: 10,5365727669096F732054494D;2,4D6575204D656E752054494D;3,536F6E73;4,43616E616973;5,4368617420646F20626C616821;6,4465736166696F;7,4167656E6461204C44;8,54494D204167656E6461;9,54494D20546F727065646F;11,54494D20436F667265;12,452D6D61696C;<CR><LF><CR><LF>+ZEND<CR><LF><CR><LF>+CME ERROR: SIM busy<CR><LF>'
** (modem-manager:8454): DEBUG: (ttyUSB3): <-- '<CR><LF>+ZPSTM: 10,5365727669096F732054494D;2,4D6575204D656E752054494D;3,536F6E73;4,43616E616973;5,4368617420646F20626C616821;6,4465736166696F;7,4167656E6461204C44;8,54494D204167656E6461;9,54494D20546F727065646F;11,54494D20436F667265;12,452D6D61696C;<CR><LF><CR><LF>+ZEND<CR><LF><CR><LF>+CPMS: "ME",3,100,"ME",3,100,"ME",3,100<CR><LF><CR><LF>OK<CR><LF>'
** (modem-manager:8454): DEBUG: (ttyUSB3): --> 'AT+GCAP<CR>'
** (modem-manager:8454): DEBUG: (ttyUSB0): --> 'ATE0+CPMS?<CR>'
** (modem-manager:8454): DEBUG: (ttyUSB3): <-- '<CR><LF>+GCAP: +CGSM,+DS,+ES<CR><LF><CR><LF>OK<CR><LF>'
** (modem-manager:8454): DEBUG: (ttyUSB2): --> 'ATE0+CPMS?<CR>'
** Message: (ttyUSB3) closing serial device...
** (modem-manager:8454): DEBUG: (ttyUSB1): --> 'ATE0+CPMS?<CR>'
** (modem-manager:8454): DEBUG: (ttyUSB1): <-- '<CR><LF>+CPMS: "ME",3,100,"ME",3,100,"ME",3,100<CR><LF><CR><LF>OK<CR><LF>'
** Message: (ZTE): GSM modem /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-5 claimed port ttyUSB3
** (modem-manager:8454): DEBUG: Added modem /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-5
** (modem-manager:8454): DEBUG: (ttyUSB1): --> 'AT+GCAP<CR>'
** (modem-manager:8454): DEBUG: (ttyUSB1): <-- '<CR><LF>+GCAP: +CGSM,+DS,+ES<CR><LF><CR><LF>OK<CR><LF>'
** Message: (ttyUSB1) closing serial device...
** (modem-manager:8454): DEBUG: Exported modem /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-5 as /org/freedesktop/ModemManager/Modems/0
** Message: (ZTE): GSM modem /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-5 claimed port ttyUSB1
** (modem-manager:8454): DEBUG: (ttyUSB0): --> 'ATE0+CPMS?<CR>'
** (modem-manager:8454): DEBUG: (ttyUSB2): --> 'ATE0+CPMS?<CR>'
** (modem-manager:8454): DEBUG: (ttyUSB0): --> 'ATE0+CPMS?<CR>'
** (modem-manager:8454): DEBUG: (ttyUSB2): --> 'ATE0+CPMS?<CR>'
** Message: (ttyUSB0) closing serial device...
** Message: (ttyUSB2) closing serial device...
** Message: (ttyUSB1) opening serial device...
** Message: Modem /org/freedesktop/ModemManager/Modems/0: state changed (disabled -> enabling)
** (modem-manager:8454): DEBUG: (ttyUSB1): <-- '<CR><LF>+ZSMSR: <CR><LF><CR><LF>+ZEND<CR><LF><CR><LF>+ZEND<CR><LF><CR><LF>+ZMTime: 5;<CR><LF><CR><LF>+ZMTime: 5;<CR><LF><CR><LF>+ZEND<CR><LF><CR><LF>+ZEND<CR><LF><CR><LF>+ZMTime: 5;<CR><LF><CR><LF>+ZMTime: 5;<CR><LF><CR><LF>+ZEND<CR><LF><CR><LF>+ZEND<CR><LF><CR><LF>+ZMTime: 5;<CR><LF><CR><LF>+ZMTime: 5;<CR><LF><CR><LF>+ZEND<CR><LF><CR><LF>+ZEND<CR><LF><CR><LF>+ZMTime: 5;<CR><LF><CR><LF>+ZMTime: 5;<CR><LF><CR><LF>+ZEND<CR><LF><CR><LF>+ZEND<CR><LF><CR><LF>+ZMTime: 5;<CR><LF><CR><LF>+ZMTime: 5;<CR><LF><CR><LF>+ZEND<CR><LF><CR><LF>+ZEND<CR><LF><CR><LF>+ZMTime: 5;<CR><LF><CR><LF>+ZMTime: 5;<CR><LF><CR><LF>+ZEND<CR><LF><CR><LF>+ZEND<CR><LF><CR><LF>+ZMTime: 5;<CR><LF><CR><LF>+ZMTime: 5;<CR><LF><CR><LF>+ZEND<CR><LF><CR><LF>+ZEND<CR><LF><CR><LF>+ZMTime: 5;<CR><LF><CR><LF>+ZMTime: 5;<CR><LF><CR><LF>+ZEND<CR><LF><CR><LF>+ZEND<CR><LF><CR><LF>+ZMTime: 5;<CR><LF><CR><LF>+ZMTime: 5;<CR><LF><CR><LF>+ZEND<CR><LF><CR><LF>+ZEND<CR><LF>'
** (modem-manager:8454): DEBUG: (ttyUSB1): --> 'ATE0 V1<CR>'
** (modem-manager:8454): DEBUG: (ttyUSB1): <-- '<CR><LF>OK<CR><LF>'
** (modem-manager:8454): DEBUG: (ttyUSB1): --> 'AT+CPIN?<CR>'
** (modem-manager:8454): DEBUG: (ttyUSB1): <-- '<CR><LF>+CPIN: READY<CR><LF><CR><LF>OK<CR><LF>'
** (modem-manager:8454): DEBUG: (ttyUSB1): --> 'ATZ E0 V1 X4 &C1 +CMEE=1;+CFUN=1;<CR>'
** (modem-manager:8454): DEBUG: (ttyUSB1): <-- '<CR><LF>OK<CR><LF>'
** Message: Modem /org/freedesktop/ModemManager/Modems/0: state changed (enabling -> enabled)
** (modem-manager:8454): DEBUG: (ttyUSB1): --> 'AT+CPIN?<CR>'
** (modem-manager:8454): DEBUG: (ttyUSB1): <-- '<CR><LF>+CPIN: READY<CR><LF><CR><LF>OK<CR><LF>'
** (modem-manager:8454): DEBUG: (ttyUSB1): --> 'AT+COPS=0,,<CR>'
** (modem-manager:8454): DEBUG: (ttyUSB1): <-- '<CR><LF>OK<CR><LF>'
** (modem-manager:8454): DEBUG: (ttyUSB1): --> 'AT+CREG?<CR>'
** (modem-manager:8454): DEBUG: (ttyUSB1): <-- '<CR><LF>+CREG: 0,1<CR><LF><CR><LF>OK<CR><LF>'
** (modem-manager:8454): DEBUG: Registration state changed: 1
** Message: Modem /org/freedesktop/ModemManager/Modems/0: state changed (enabled -> registered)
** (modem-manager:8454): DEBUG: (ttyUSB1): --> 'AT+COPS=3,2;+COPS?<CR>'
** (modem-manager:8454): DEBUG: (ttyUSB1): <-- '<CR><LF>+COPS: 0,2,"72402",2<CR><LF><CR><LF>OK<CR><LF>'
** (modem-manager:8454): DEBUG: (ttyUSB1): --> 'AT+COPS=3,0;+COPS?<CR>'
** (modem-manager:8454): DEBUG: (ttyUSB1): <-- '<CR><LF>+COPS: 0,0,"TIM Brasil",2<CR><LF><CR><LF>OK<CR><LF>'
** (modem-manager:8454): DEBUG: (ttyUSB1): --> 'AT+CSQ<CR>'
** (modem-manager:8454): DEBUG: (ttyUSB1): <-- '<CR><LF>+CSQ: 15,99<CR><LF><CR><LF>OK<CR><LF>'
** (modem-manager:8454): DEBUG: (ttyUSB1): --> 'AT+CGDCONT?<CR>'
** (modem-manager:8454): DEBUG: (ttyUSB1): <-- '<CR><LF>+CGDCONT: 1,"IP","www.tim.com.br","0.0.0.0",0,0<CR><LF>+CGDCONT: 2,"IP","tim.br","0.0.0.0",0,0<CR><LF><CR><LF>OK<CR><LF>'
** Message: Modem /org/freedesktop/ModemManager/Modems/0: state changed (registered -> connecting)
** (modem-manager:8454): DEBUG: (ttyUSB1): --> 'ATD*99***1#<CR>'
** (modem-manager:8454): DEBUG: (ttyUSB1): <-- '<CR><LF>CONNECT 7200000<CR><LF>'
** Message: Modem /org/freedesktop/ModemManager/Modems/0: state changed (connecting -> connected)
** Message: Modem /org/freedesktop/ModemManager/Modems/0: state changed (connected -> disconnecting)
** Message: Modem /org/freedesktop/ModemManager/Modems/0: state changed (disconnecting -> registered)

Cálcio · 30 de Novembro de 2010, 11:10

Código Selecionar

tail -f /var/log/syslog
Nov 30 10:56:21 pc-desktop kernel: [ 4609.923198] Inbound IN=eth0 OUT= MAC=00:24:21:59:82:f2:00:07:95:05:7d:c6:08:00 SRC=192.168.0.2 DST=192.168.0.101 LEN=90 TOS=0x00 PREC=0x00 TTL=128 ID=33739 PROTO=UDP SPT=137 DPT=137 LEN=70 
Nov 30 10:58:06 pc-desktop modem-manager: Caught signal 15, shutting down...
Nov 30 10:58:06 pc-desktop modem-manager: (ttyUSB1) closing serial device...
Nov 30 10:58:06 pc-desktop NetworkManager: <info>  modem manager disappeared
Nov 30 10:58:06 pc-desktop NetworkManager: <info>  (ttyUSB1): now unmanaged
Nov 30 10:58:06 pc-desktop NetworkManager: <info>  (ttyUSB1): device state change: 3 -> 1 (reason 36)
Nov 30 10:58:06 pc-desktop NetworkManager: <info>  (ttyUSB1): cleaning up...
Nov 30 10:58:06 pc-desktop NetworkManager: <info>  (ttyUSB1): taking down device.
Nov 30 10:58:06 pc-desktop NetworkManager: <info>  Trying to start the modem-manager...
Nov 30 10:58:06 pc-desktop NetworkManager: <info>  modem-manager is now available
Nov 30 10:58:51 pc-desktop kernel: [ 4759.376609] usb 1-5: USB disconnect, address 10
Nov 30 10:58:51 pc-desktop kernel: [ 4759.376683] option: option_instat_callback: error -108
Nov 30 10:58:51 pc-desktop kernel: [ 4759.376845] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
Nov 30 10:58:51 pc-desktop kernel: [ 4759.376863] option 1-5:1.0: device disconnected
Nov 30 10:58:51 pc-desktop kernel: [ 4759.376975] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
Nov 30 10:58:51 pc-desktop kernel: [ 4759.376989] option 1-5:1.1: device disconnected
Nov 30 10:58:51 pc-desktop kernel: [ 4759.377094] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
Nov 30 10:58:51 pc-desktop kernel: [ 4759.377107] option 1-5:1.2: device disconnected
Nov 30 10:58:51 pc-desktop kernel: [ 4759.400481] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3
Nov 30 10:58:51 pc-desktop kernel: [ 4759.400496] option 1-5:1.4: device disconnected
Nov 30 10:59:01 pc-desktop kernel: [ 4769.370013] usb 1-5: new high speed USB device using ehci_hcd and address 11
Nov 30 10:59:01 pc-desktop kernel: [ 4769.521960] usb 1-5: configuration #1 chosen from 1 choice
Nov 30 10:59:01 pc-desktop kernel: [ 4769.525838] scsi12 : SCSI emulation for USB Mass Storage devices
Nov 30 10:59:01 pc-desktop kernel: [ 4769.525898] usb-storage: device found at 11
Nov 30 10:59:01 pc-desktop kernel: [ 4769.525899] usb-storage: waiting for device to settle before scanning
Nov 30 10:59:02 pc-desktop usb_modeswitch: switching 19d2:2000 (ONDA,Incorporated: ONDA WCDMA Technologies MSM)
Nov 30 10:59:03 pc-desktop kernel: [ 4771.300246] usb 1-5: USB disconnect, address 11
Nov 30 10:59:08 pc-desktop kernel: [ 4776.370020] usb 1-5: new high speed USB device using ehci_hcd and address 12
Nov 30 10:59:08 pc-desktop kernel: [ 4776.522103] usb 1-5: configuration #1 chosen from 1 choice
Nov 30 10:59:08 pc-desktop kernel: [ 4776.525198] option 1-5:1.0: GSM modem (1-port) converter detected
Nov 30 10:59:08 pc-desktop kernel: [ 4776.525273] usb 1-5: GSM modem (1-port) converter now attached to ttyUSB0
Nov 30 10:59:08 pc-desktop kernel: [ 4776.525328] option 1-5:1.1: GSM modem (1-port) converter detected
Nov 30 10:59:08 pc-desktop kernel: [ 4776.525367] usb 1-5: GSM modem (1-port) converter now attached to ttyUSB1
Nov 30 10:59:08 pc-desktop kernel: [ 4776.525421] option 1-5:1.2: GSM modem (1-port) converter detected
Nov 30 10:59:08 pc-desktop kernel: [ 4776.525460] usb 1-5: GSM modem (1-port) converter now attached to ttyUSB2
Nov 30 10:59:08 pc-desktop kernel: [ 4776.525581] scsi13 : SCSI emulation for USB Mass Storage devices
Nov 30 10:59:08 pc-desktop kernel: [ 4776.529327] option 1-5:1.4: GSM modem (1-port) converter detected
Nov 30 10:59:08 pc-desktop kernel: [ 4776.529427] usb 1-5: GSM modem (1-port) converter now attached to ttyUSB3
Nov 30 10:59:08 pc-desktop kernel: [ 4776.530859] usb-storage: device found at 12
Nov 30 10:59:08 pc-desktop kernel: [ 4776.530860] usb-storage: waiting for device to settle before scanning
Nov 30 10:59:09 pc-desktop usb_modeswitch: switched to 19d2:0091 (ONDA,Incorporated: ONDA WCDMA Technologies MSM)
Nov 30 10:59:13 pc-desktop kernel: [ 4781.530447] usb-storage: device scan complete
Nov 30 10:59:13 pc-desktop kernel: [ 4781.531039] scsi 13:0:0:0: Direct-Access     ONDA     MMC Storage      2.31 PQ: 0 ANSI: 2
Nov 30 10:59:13 pc-desktop kernel: [ 4781.531745] sd 13:0:0:0: Attached scsi generic sg3 type 0
Nov 30 10:59:13 pc-desktop kernel: [ 4781.536032] sd 13:0:0:0: [sdc] Attached SCSI removable disk
Nov 30 10:59:21 pc-desktop NetworkManager: <info>  (ttyUSB1): new GSM device (driver: 'option1')
Nov 30 10:59:21 pc-desktop NetworkManager: <info>  (ttyUSB1): exported as /org/freedesktop/NetworkManager/Devices/4
Nov 30 10:59:21 pc-desktop NetworkManager: <info>  (ttyUSB1): now managed
Nov 30 10:59:21 pc-desktop NetworkManager: <info>  (ttyUSB1): device state change: 1 -> 2 (reason 2)
Nov 30 10:59:21 pc-desktop NetworkManager: <info>  (ttyUSB1): deactivating device (reason: 2).
Nov 30 10:59:21 pc-desktop NetworkManager: <info>  (ttyUSB1): device state change: 2 -> 3 (reason 0)
Nov 30 11:01:23 pc-desktop kernel: [ 4911.141758] Inbound IN=eth0 OUT= MAC=00:24:21:59:82:f2:00:07:95:05:7d:c6:08:00 SRC=192.168.0.2 DST=192.168.0.101 LEN=90 TOS=0x00 PREC=0x00 TTL=128 ID=33749 PROTO=UDP SPT=137 DPT=137 LEN=70 
Nov 30 11:01:25 pc-desktop kernel: [ 4913.143785] Inbound IN=eth0 OUT= MAC=00:24:21:59:82:f2:00:07:95:05:7d:c6:08:00 SRC=192.168.0.2 DST=192.168.0.101 LEN=90 TOS=0x00 PREC=0x00 TTL=128 ID=33750 PROTO=UDP SPT=137 DPT=137 LEN=70 
Nov 30 11:01:26 pc-desktop kernel: [ 4914.144875] Inbound IN=eth0 OUT= MAC=00:24:21:59:82:f2:00:07:95:05:7d:c6:08:00 SRC=192.168.0.2 DST=192.168.0.101 LEN=90 TOS=0x00 PREC=0x00 TTL=128 ID=33751 PROTO=UDP SPT=137 DPT=137 LEN=70 
Nov 30 11:01:27 pc-desktop kernel: [ 4915.145976] Inbound IN=eth0 OUT= MAC=00:24:21:59:82:f2:00:07:95:05:7d:c6:08:00 SRC=192.168.0.2 DST=192.168.0.101 LEN=90 TOS=0x00 PREC=0x00 TTL=128 ID=33752 PROTO=UDP SPT=137 DPT=137 LEN=70 
Nov 30 11:06:28 pc-desktop kernel: [ 5216.391790] Inbound IN=eth0 OUT= MAC=00:24:21:59:82:f2:00:07:95:05:7d:c6:08:00 SRC=192.168.0.2 DST=192.168.0.101 LEN=90 TOS=0x00 PREC=0x00 TTL=128 ID=33758 PROTO=UDP SPT=137 DPT=137 LEN=70 
Nov 30 11:06:30 pc-desktop kernel: [ 5218.393762] Inbound IN=eth0 OUT= MAC=00:24:21:59:82:f2:00:07:95:05:7d:c6:08:00 SRC=192.168.0.2 DST=192.168.0.101 LEN=90 TOS=0x00 PREC=0x00 TTL=128 ID=33759 PROTO=UDP SPT=137 DPT=137 LEN=70 
Nov 30 11:06:31 pc-desktop kernel: [ 5219.394823] Inbound IN=eth0 OUT= MAC=00:24:21:59:82:f2:00:07:95:05:7d:c6:08:00 SRC=192.168.0.2 DST=192.168.0.101 LEN=90 TOS=0x00 PREC=0x00 TTL=128 ID=33760 PROTO=UDP SPT=137 DPT=137 LEN=70 
Nov 30 11:06:32 pc-desktop kernel: [ 5220.395913] Inbound IN=eth0 OUT= MAC=00:24:21:59:82:f2:00:07:95:05:7d:c6:08:00 SRC=192.168.0.2 DST=192.168.0.101 LEN=90 TOS=0x00 PREC=0x00 TTL=128 ID=33761 PROTO=UDP SPT=137 DPT=137 LEN=70 
Nov 30 11:07:59 pc-desktop NetworkManager: <info>  Activation (ttyUSB1) starting connection 'TIM'
Nov 30 11:07:59 pc-desktop NetworkManager: <info>  (ttyUSB1): device state change: 3 -> 4 (reason 0)
Nov 30 11:07:59 pc-desktop NetworkManager: <info>  Activation (ttyUSB1) Stage 1 of 5 (Device Prepare) scheduled...
Nov 30 11:07:59 pc-desktop NetworkManager: <info>  Activation (ttyUSB1) Stage 1 of 5 (Device Prepare) started...
Nov 30 11:07:59 pc-desktop NetworkManager: <info>  (ttyUSB1): device state change: 4 -> 6 (reason 0)
Nov 30 11:07:59 pc-desktop NetworkManager: <info>  Activation (ttyUSB1) Stage 1 of 5 (Device Prepare) complete.
Nov 30 11:07:59 pc-desktop NetworkManager: <info>  Activation (ttyUSB1) Stage 1 of 5 (Device Prepare) scheduled...
Nov 30 11:07:59 pc-desktop NetworkManager: <info>  Activation (ttyUSB1) Stage 1 of 5 (Device Prepare) started...
Nov 30 11:07:59 pc-desktop NetworkManager: <info>  (ttyUSB1): device state change: 6 -> 4 (reason 0)
Nov 30 11:07:59 pc-desktop NetworkManager: <info>  Activation (ttyUSB1) Stage 1 of 5 (Device Prepare) complete.
Nov 30 11:07:59 pc-desktop NetworkManager: <info>  Activation (ttyUSB1) Stage 2 of 5 (Device Configure) scheduled...
Nov 30 11:07:59 pc-desktop NetworkManager: <info>  Activation (ttyUSB1) Stage 2 of 5 (Device Configure) starting...
Nov 30 11:07:59 pc-desktop NetworkManager: <info>  (ttyUSB1): device state change: 4 -> 5 (reason 0)
Nov 30 11:07:59 pc-desktop NetworkManager: <info>  Activation (ttyUSB1) Stage 2 of 5 (Device Configure) successful.
Nov 30 11:07:59 pc-desktop NetworkManager: <info>  Activation (ttyUSB1) Stage 3 of 5 (IP Configure Start) scheduled.
Nov 30 11:07:59 pc-desktop NetworkManager: <info>  Activation (ttyUSB1) Stage 2 of 5 (Device Configure) complete.
Nov 30 11:07:59 pc-desktop NetworkManager: <info>  Activation (ttyUSB1) Stage 3 of 5 (IP Configure Start) started...
Nov 30 11:07:59 pc-desktop NetworkManager: <info>  (ttyUSB1): device state change: 5 -> 7 (reason 0)
Nov 30 11:07:59 pc-desktop NetworkManager: <info>  Starting pppd connection
Nov 30 11:07:59 pc-desktop NetworkManager: <debug> [1291122479.879364] nm_ppp_manager_start(): Command line: /usr/sbin/pppd nodetach lock nodefaultroute user tim ttyUSB1 noipdefault noauth usepeerdns lcp-echo-failure 5 lcp-echo-interval 30 ipparam /org/freedesktop/NetworkManager/PPP/3 plugin /usr/lib/pppd/2.4.4/nm-pppd-plugin.so
Nov 30 11:07:59 pc-desktop NetworkManager: <debug> [1291122479.880253] nm_ppp_manager_start(): ppp started with pid 9219
Nov 30 11:07:59 pc-desktop NetworkManager: <info>  Activation (ttyUSB1) Stage 4 of 5 (IP6 Configure Get) scheduled...
Nov 30 11:07:59 pc-desktop NetworkManager: <info>  Activation (ttyUSB1) Stage 3 of 5 (IP Configure Start) complete.
Nov 30 11:07:59 pc-desktop NetworkManager: <info>  Activation (ttyUSB1) Stage 4 of 5 (IP6 Configure Get) started...
Nov 30 11:07:59 pc-desktop NetworkManager: <info>  Activation (ttyUSB1) Stage 4 of 5 (IP6 Configure Get) complete.
Nov 30 11:07:59 pc-desktop pppd[9219]: Plugin /usr/lib/pppd/2.4.4/nm-pppd-plugin.so loaded.
Nov 30 11:07:59 pc-desktop pppd[9219]: pppd 2.4.5 started by root, uid 0
Nov 30 11:07:59 pc-desktop pppd[9219]: Removed stale lock on ttyUSB1 (pid 7809)
Nov 30 11:07:59 pc-desktop pppd[9219]: Using interface ppp0
Nov 30 11:07:59 pc-desktop pppd[9219]: Connect: ppp0 <--> /dev/ttyUSB1
Nov 30 11:07:59 pc-desktop NetworkManager:    SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/ppp0, iface: ppp0)
Nov 30 11:07:59 pc-desktop NetworkManager:    SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/ppp0, iface: ppp0): no ifupdown configuration found.
Nov 30 11:08:19 pc-desktop NetworkManager: <WARN>  pppd_timed_out(): Looks like pppd didn't initialize our dbus module
Nov 30 11:08:20 pc-desktop NetworkManager: <info>  (ttyUSB1): device state change: 7 -> 9 (reason 14)
Nov 30 11:08:20 pc-desktop pppd[9219]: Terminating on signal 15
Nov 30 11:08:20 pc-desktop NetworkManager: <info>  Marking connection 'TIM' invalid.
Nov 30 11:08:20 pc-desktop NetworkManager: <info>  Activation (ttyUSB1) failed.
Nov 30 11:08:20 pc-desktop NetworkManager: <info>  (ttyUSB1): device state change: 9 -> 3 (reason 0)
Nov 30 11:08:20 pc-desktop NetworkManager: <info>  (ttyUSB1): deactivating device (reason: 0).
Nov 30 11:08:20 pc-desktop NetworkManager: <info>  Policy set 'Oi Velox' (eth0) as default for routing and DNS.
Nov 30 11:08:22 pc-desktop NetworkManager: <debug> [1291122502.001932] ensure_killed(): waiting for ppp pid 9219 to exit
Nov 30 11:08:22 pc-desktop NetworkManager: <debug> [1291122502.058985] ensure_killed(): ppp pid 9219 cleaned up
Nov 30 11:08:22 pc-desktop NetworkManager:    SCPlugin-Ifupdown: devices removed (path: /sys/devices/virtual/net/ppp0, iface: ppp0)
Nov 30 11:08:55 pc-desktop NetworkManager: <info>  modem manager disappeared
Nov 30 11:08:55 pc-desktop NetworkManager: <info>  (ttyUSB1): now unmanaged
Nov 30 11:08:55 pc-desktop NetworkManager: <info>  (ttyUSB1): device state change: 3 -> 1 (reason 36)
Nov 30 11:08:55 pc-desktop NetworkManager: <info>  (ttyUSB1): cleaning up...
Nov 30 11:08:55 pc-desktop NetworkManager: <info>  (ttyUSB1): taking down device.
Nov 30 11:08:55 pc-desktop NetworkManager: <info>  Trying to start the modem-manager...
Nov 30 11:08:55 pc-desktop modem-manager: Loaded plugin Option High-Speed
Nov 30 11:08:55 pc-desktop modem-manager: Loaded plugin Sierra
Nov 30 11:08:55 pc-desktop NetworkManager: <info>  modem-manager is now available
Nov 30 11:08:55 pc-desktop modem-manager: Loaded plugin Nokia
Nov 30 11:08:55 pc-desktop modem-manager: Loaded plugin ZTE
Nov 30 11:08:55 pc-desktop modem-manager: Loaded plugin Longcheer
Nov 30 11:08:55 pc-desktop modem-manager: Loaded plugin Ericsson MBM
Nov 30 11:08:55 pc-desktop modem-manager: Loaded plugin Gobi
Nov 30 11:08:55 pc-desktop modem-manager: Loaded plugin Option
Nov 30 11:08:55 pc-desktop modem-manager: Loaded plugin AnyData
Nov 30 11:08:55 pc-desktop modem-manager: Loaded plugin Huawei
Nov 30 11:08:55 pc-desktop modem-manager: Loaded plugin MotoC
Nov 30 11:08:55 pc-desktop modem-manager: Loaded plugin Generic
Nov 30 11:08:55 pc-desktop modem-manager: Loaded plugin Novatel
Nov 30 11:08:55 pc-desktop modem-manager: (ttyUSB0) opening serial device...
Nov 30 11:08:55 pc-desktop modem-manager: (ttyUSB0): probe requested by plugin 'ZTE'
Nov 30 11:08:55 pc-desktop modem-manager: (ttyUSB1) opening serial device...
Nov 30 11:08:55 pc-desktop modem-manager: (ttyUSB1): probe requested by plugin 'ZTE'
Nov 30 11:08:55 pc-desktop modem-manager: (ttyUSB2) opening serial device...
Nov 30 11:08:55 pc-desktop modem-manager: (ttyUSB2): probe requested by plugin 'ZTE'
Nov 30 11:08:55 pc-desktop modem-manager: (ttyUSB3) opening serial device...
Nov 30 11:08:55 pc-desktop modem-manager: (ttyUSB3): probe requested by plugin 'ZTE'
Nov 30 11:09:01 pc-desktop CRON[9321]: (root) CMD (  [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type f -cmin +$(/usr/lib/php5/maxlifetime) -print0 | xargs -n 200 -r -0 rm)
Nov 30 11:09:01 pc-desktop modem-manager: (ttyUSB3) closing serial device...
Nov 30 11:09:02 pc-desktop modem-manager: (ZTE): GSM modem /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-5 claimed port ttyUSB3
Nov 30 11:09:02 pc-desktop modem-manager: Added modem /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-5
Nov 30 11:09:13 pc-desktop modem-manager: (ttyUSB0) closing serial device...
Nov 30 11:09:14 pc-desktop modem-manager: (ttyUSB1) closing serial device...
Nov 30 11:09:16 pc-desktop modem-manager: (ttyUSB2) closing serial device...

zekkerj · 30 de Novembro de 2010, 11:43

Ele está tentando conectar. Chegou a conectar uma vez, mas houve um problema em outro módulo.

Vc tem outra conexão, certo? Verifique se todos os seus pacotes estão atualizados.

sudo apt-get update && sudo apt-get dist-upgrade

Cálcio · 30 de Novembro de 2010, 11:57

Pediu para atualizar 2 pacotes, e já atualizei:
Os pacotes a seguir serão atualizados:
libpurple-bin libpurple0
2 pacotes atualizados, 0 pacotes novos instalados, 0 a serem removidos e 0 não atualizados.

Mas ainda nada.

Código Selecionar

tail -f /var/log/syslog
Nov 30 11:53:38 pc-desktop NetworkManager: <info>  Activation (ttyUSB1) failed.
Nov 30 11:53:38 pc-desktop NetworkManager: <info>  (ttyUSB1): device state change: 9 -> 3 (reason 0)
Nov 30 11:53:38 pc-desktop NetworkManager: <info>  (ttyUSB1): deactivating device (reason: 0).
Nov 30 11:53:38 pc-desktop pppd[12778]: Terminating on signal 15
Nov 30 11:53:38 pc-desktop modem-manager: Modem /org/freedesktop/ModemManager/Modems/1: state changed (connected -> disconnecting)
Nov 30 11:53:38 pc-desktop NetworkManager: <info>  Policy set 'Oi Velox' (eth0) as default for routing and DNS.
Nov 30 11:53:39 pc-desktop modem-manager: Modem /org/freedesktop/ModemManager/Modems/1: state changed (disconnecting -> registered)
Nov 30 11:53:40 pc-desktop NetworkManager: <debug> [1291125220.001140] ensure_killed(): waiting for ppp pid 12778 to exit
Nov 30 11:53:40 pc-desktop NetworkManager: <debug> [1291125220.059000] ensure_killed(): ppp pid 12778 cleaned up
Nov 30 11:53:40 pc-desktop NetworkManager:    SCPlugin-Ifupdown: devices removed (path: /sys/devices/virtual/net/ppp0, iface: ppp0)
Nov 30 11:53:51 pc-desktop modem-manager: (ttyUSB1) closing serial device...
Nov 30 11:53:51 pc-desktop modem-manager: Modem /org/freedesktop/ModemManager/Modems/1: state changed (registered -> disabled)
Nov 30 11:53:51 pc-desktop modem-manager: Removed modem /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1
Nov 30 11:53:51 pc-desktop NetworkManager: <info>  (ttyUSB1): now unmanaged
Nov 30 11:53:51 pc-desktop NetworkManager: <info>  (ttyUSB1): device state change: 3 -> 1 (reason 36)
Nov 30 11:53:51 pc-desktop NetworkManager: <info>  (ttyUSB1): cleaning up...
Nov 30 11:53:51 pc-desktop NetworkManager: <info>  (ttyUSB1): taking down device.
Nov 30 11:53:51 pc-desktop kernel: [ 8059.322922] usb 1-1: USB disconnect, address 16
Nov 30 11:53:51 pc-desktop kernel: [ 8059.323121] option: option_instat_callback: error -108
Nov 30 11:53:51 pc-desktop kernel: [ 8059.323291] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
Nov 30 11:53:51 pc-desktop kernel: [ 8059.323310] option 1-1:1.0: device disconnected
Nov 30 11:53:51 pc-desktop kernel: [ 8059.323440] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
Nov 30 11:53:51 pc-desktop kernel: [ 8059.323449] option 1-1:1.1: device disconnected
Nov 30 11:53:51 pc-desktop kernel: [ 8059.323552] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
Nov 30 11:53:51 pc-desktop kernel: [ 8059.323566] option 1-1:1.2: device disconnected
Nov 30 11:53:51 pc-desktop kernel: [ 8059.350575] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3
Nov 30 11:53:51 pc-desktop kernel: [ 8059.350592] option 1-1:1.4: device disconnected
Nov 30 11:53:59 pc-desktop kernel: [ 8067.040025] usb 1-1: new high speed USB device using ehci_hcd and address 17
Nov 30 11:53:59 pc-desktop kernel: [ 8067.191989] usb 1-1: configuration #1 chosen from 1 choice
Nov 30 11:53:59 pc-desktop kernel: [ 8067.196125] scsi18 : SCSI emulation for USB Mass Storage devices
Nov 30 11:53:59 pc-desktop kernel: [ 8067.197568] usb-storage: device found at 17
Nov 30 11:53:59 pc-desktop kernel: [ 8067.197570] usb-storage: waiting for device to settle before scanning
Nov 30 11:53:59 pc-desktop usb_modeswitch: switching 19d2:2000 (ONDA,Incorporated: ONDA WCDMA Technologies MSM)
Nov 30 11:54:00 pc-desktop kernel: [ 8068.978399] usb 1-1: USB disconnect, address 17
Nov 30 11:54:06 pc-desktop kernel: [ 8074.061461] usb 1-1: new high speed USB device using ehci_hcd and address 18
Nov 30 11:54:06 pc-desktop kernel: [ 8074.212257] usb 1-1: configuration #1 chosen from 1 choice
Nov 30 11:54:06 pc-desktop kernel: [ 8074.215351] option 1-1:1.0: GSM modem (1-port) converter detected
Nov 30 11:54:06 pc-desktop kernel: [ 8074.215427] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
Nov 30 11:54:06 pc-desktop kernel: [ 8074.215484] option 1-1:1.1: GSM modem (1-port) converter detected
Nov 30 11:54:06 pc-desktop kernel: [ 8074.215527] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
Nov 30 11:54:06 pc-desktop kernel: [ 8074.215580] option 1-1:1.2: GSM modem (1-port) converter detected
Nov 30 11:54:06 pc-desktop kernel: [ 8074.215621] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB2
Nov 30 11:54:06 pc-desktop kernel: [ 8074.220715] scsi19 : SCSI emulation for USB Mass Storage devices
Nov 30 11:54:06 pc-desktop kernel: [ 8074.226272] option 1-1:1.4: GSM modem (1-port) converter detected
Nov 30 11:54:06 pc-desktop kernel: [ 8074.226368] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB3
Nov 30 11:54:06 pc-desktop kernel: [ 8074.230856] usb-storage: device found at 18
Nov 30 11:54:06 pc-desktop kernel: [ 8074.230859] usb-storage: waiting for device to settle before scanning
Nov 30 11:54:06 pc-desktop modem-manager: (ttyUSB2) opening serial device...
Nov 30 11:54:06 pc-desktop modem-manager: (ttyUSB2): probe requested by plugin 'ZTE'
Nov 30 11:54:06 pc-desktop modem-manager: (ttyUSB1) opening serial device...
Nov 30 11:54:06 pc-desktop modem-manager: (ttyUSB1): probe requested by plugin 'ZTE'
Nov 30 11:54:06 pc-desktop modem-manager: (ttyUSB3) opening serial device...
Nov 30 11:54:06 pc-desktop modem-manager: (ttyUSB3): probe requested by plugin 'ZTE'
Nov 30 11:54:06 pc-desktop modem-manager: (ttyUSB0) opening serial device...
Nov 30 11:54:06 pc-desktop modem-manager: (ttyUSB0): probe requested by plugin 'ZTE'
Nov 30 11:54:07 pc-desktop usb_modeswitch: switched to 19d2:0091 (ONDA,Incorporated: ONDA WCDMA Technologies MSM)
Nov 30 11:54:10 pc-desktop modem-manager: Got failure code 100: Unknown error
Nov 30 11:54:10 pc-desktop modem-manager: Got failure code 100: Unknown error
Nov 30 11:54:11 pc-desktop kernel: [ 8079.230465] usb-storage: device scan complete
Nov 30 11:54:11 pc-desktop kernel: [ 8079.231065] scsi 19:0:0:0: Direct-Access     ONDA     MMC Storage      2.31 PQ: 0 ANSI: 2
Nov 30 11:54:11 pc-desktop kernel: [ 8079.231880] sd 19:0:0:0: Attached scsi generic sg3 type 0
Nov 30 11:54:11 pc-desktop kernel: [ 8079.236226] sd 19:0:0:0: [sdc] Attached SCSI removable disk
Nov 30 11:54:12 pc-desktop modem-manager: Got failure code 100: Unknown error
Nov 30 11:54:12 pc-desktop modem-manager: Got failure code 100: Unknown error
Nov 30 11:54:19 pc-desktop modem-manager: (ttyUSB3) closing serial device...
Nov 30 11:54:21 pc-desktop modem-manager: (ZTE): GSM modem /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1 claimed port ttyUSB3
Nov 30 11:54:21 pc-desktop modem-manager: Added modem /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1
Nov 30 11:54:22 pc-desktop modem-manager: (ttyUSB1) closing serial device...
Nov 30 11:54:22 pc-desktop modem-manager: Exported modem /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1 as /org/freedesktop/ModemManager/Modems/2
Nov 30 11:54:22 pc-desktop modem-manager: (ZTE): GSM modem /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1 claimed port ttyUSB1
Nov 30 11:54:22 pc-desktop NetworkManager: <info>  (ttyUSB1): new GSM device (driver: 'option1')
Nov 30 11:54:22 pc-desktop NetworkManager: <info>  (ttyUSB1): exported as /org/freedesktop/NetworkManager/Devices/7
Nov 30 11:54:22 pc-desktop NetworkManager: <info>  (ttyUSB1): now managed
Nov 30 11:54:22 pc-desktop NetworkManager: <info>  (ttyUSB1): device state change: 1 -> 2 (reason 2)
Nov 30 11:54:22 pc-desktop NetworkManager: <info>  (ttyUSB1): deactivating device (reason: 2).
Nov 30 11:54:22 pc-desktop NetworkManager: <info>  (ttyUSB1): device state change: 2 -> 3 (reason 0)
Nov 30 11:54:28 pc-desktop modem-manager: (ttyUSB2) closing serial device...
Nov 30 11:54:29 pc-desktop modem-manager: (ttyUSB0) closing serial device...

Isso já virou uma odisseia.

galafuz · 01 de Dezembro de 2010, 22:26

Também continuo sem conseguir fazer esse modem funcionar, no meu caso, por conta dos servidores DNS. Instalei o pacote resolvconf como o zekkerj sugeriu mas não mudou nada.

Procurei dicas na net e tudo que consegui achar foi pra comentar a linha "usepeerdns" no arquivo /etc/ppp/peers/wvdial e colocar a opção "Auto DNS = Off" no /etc/wvdial.conf. Depois dizem pra adicionar os endereços DNS certos no arquivo /etc/resolv.conf

Porém quando faço isso, ele simplesmente não acha nenhum servidor DNS, por mais tempo que eu dê a ele. Se habilito o Auto DNS e/ou o usepeerdns ele passa a encontrar servidores DNS, mas em mais de noventa por cento das vezes ele sobrescreve o resolv.conf com servidores errados que ele acha (esses servidores são 10.11.12.13 e 10.11.12.14). O mais bizarro é que umas duas outras vezes, não sei como ou porque, ele conseguiu achar os servidores DNS corretos e a conexão funcionou, porém quando desconectei e tentei conectar de novo na sequência ele voltou a colocar os servidores errados.

Alguém tem alguma idéia de como posso resolver isso?

Obrigado pela ajuda.