Placa tv

[Navyseal]

Tenho o Ubuntu 10.10 e uma placa tv Pixelview Play Pro Ultra. Gostava de a pôr a funcionar mas acho que o tvtime está sempre a detectar a webcam no USB em vez da placa de tv (pci) e não sei como alterar isso.

Deixo aqui as informações relevantes sobre o caso.

lspci

Código Selecionar Expandir

00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge
00:02.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (ext gfx port 0)
00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2)
00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [IDE mode]
00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:12.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller
00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:13.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller
00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3c)
00:14.1 IDE interface: ATI Technologies Inc SB700/SB800 IDE Controller
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge
00:14.5 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control
01:00.0 VGA compatible controller: ATI Technologies Inc RV730XT [Radeon HD 4670]
01:00.1 Audio device: ATI Technologies Inc RV710/730
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
03:07.0 Multimedia video controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder (rev 05)

[Navyseal]

dmesg

Código Selecionar Expandir

[    0.273594] pci 0000:00:14.4:   bridge window [io  disabled]
[    0.273599] pci 0000:00:14.4:   bridge window [mem 0xfd000000-0xfdffffff]
[    0.273602] pci 0000:00:14.4:   bridge window [mem pref disabled]
[    0.273612]   alloc irq_desc for 18 on node -1
[    0.273614]   alloc kstat_irqs on node -1
[    0.273618] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.273621] pci 0000:00:02.0: setting latency timer to 64
[    0.273626] pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.273628] pci 0000:00:06.0: setting latency timer to 64
[    0.273635] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.273636] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.273638] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.273640] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[    0.273642] pci_bus 0000:00: resource 8 [mem 0x80000000-0xdfffffff]
[    0.273643] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[    0.273645] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
[    0.273647] pci_bus 0000:01: resource 1 [mem 0xfce00000-0xfcefffff]
[    0.273649] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.273651] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.273653] pci_bus 0000:02: resource 1 [mem 0xfcf00000-0xfcffffff]
[    0.273655] pci_bus 0000:03: resource 1 [mem 0xfd000000-0xfdffffff]
[    0.273656] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7]
[    0.273658] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff]
[    0.273660] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[    0.273661] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
[    0.273663] pci_bus 0000:03: resource 8 [mem 0x80000000-0xdfffffff]
[    0.273665] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff]
[    0.273694] NET: Registered protocol family 2
[    0.273748] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.273923] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.274374] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.274614] TCP: Hash tables configured (established 131072 bind 65536)
[    0.274616] TCP reno registered
[    0.274618] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.274627] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.274705] NET: Registered protocol family 1
[    0.395140] pci 0000:01:00.0: Boot video device
[    0.395150] PCI: CLS 64 bytes, default 64
[    0.395300] cpufreq-nforce2: No nForce2 chipset.
[    0.395318] Scanning for low memory corruption every 60 seconds
[    0.395391] audit: initializing netlink socket (disabled)
[    0.395400] type=2000 audit(1287227036.392:1): initialized
[    0.402188] highmem bounce pool size: 64 pages
[    0.402191] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.403062] VFS: Disk quotas dquot_6.5.2
[    0.403108] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.403480] fuse init (API version 7.14)
[    0.403535] msgmni has been set to 1682
[    0.405132] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.405134] io scheduler noop registered
[    0.405136] io scheduler deadline registered
[    0.405145] io scheduler cfq registered (default)
[    0.405225] pcieport 0000:00:02.0: setting latency timer to 64
[    0.405244]   alloc irq_desc for 40 on node -1
[    0.405245]   alloc kstat_irqs on node -1
[    0.405252] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[    0.405290] pcieport 0000:00:06.0: setting latency timer to 64
[    0.405306]   alloc irq_desc for 41 on node -1
[    0.405307]   alloc kstat_irqs on node -1
[    0.405310] pcieport 0000:00:06.0: irq 41 for MSI/MSI-X
[    0.405355] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.405369] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.405489] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.405493] ACPI: Power Button [PWRB]
[    0.405521] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.405523] ACPI: Power Button [PWRF]
[    0.405772] ACPI: acpi_idle registered with cpuidle
[    0.408502] ERST: Table is not found!
[    0.408666] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.408769] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.409039] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.409739] brd: module loaded
[    0.410064] loop: module loaded
[    0.410196]   alloc irq_desc for 16 on node -1
[    0.410198]   alloc kstat_irqs on node -1
[    0.410204] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.410230] pata_acpi 0000:00:14.1: setting latency timer to 64
[    0.410408] Fixed MDIO Bus: probed
[    0.410427] PPP generic driver version 2.4.2
[    0.410447] tun: Universal TUN/TAP device driver, 1.6
[    0.410449] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.410496] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.410509]   alloc irq_desc for 17 on node -1
[    0.410510]   alloc kstat_irqs on node -1
[    0.410513] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.410523] ehci_hcd 0000:00:12.2: EHCI Host Controller
[    0.410541] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[    0.410565] ehci_hcd 0000:00:12.2: debug port 1
[    0.410584] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfcdff800
[    0.410614] isapnp: Scanning for PnP cards...
[    0.413899] Freeing initrd memory: 10512k freed
[    0.419020] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    0.419153] hub 1-0:1.0: USB hub found
[    0.419157] hub 1-0:1.0: 6 ports detected
[    0.419221]   alloc irq_desc for 19 on node -1
[    0.419222]   alloc kstat_irqs on node -1
[    0.419227] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.419242] ehci_hcd 0000:00:13.2: EHCI Host Controller
[    0.419265] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[    0.419288] ehci_hcd 0000:00:13.2: debug port 1
[    0.419308] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfcdff400
[    0.431125] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    0.431231] hub 2-0:1.0: USB hub found
[    0.431234] hub 2-0:1.0: 6 ports detected
[    0.431295] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.431309] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.431325] ohci_hcd 0000:00:12.0: OHCI Host Controller
[    0.431347] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[    0.431371] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfcdfe000
[    0.491229] hub 3-0:1.0: USB hub found
[    0.491236] hub 3-0:1.0: 3 ports detected
[    0.491289] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.491303] ohci_hcd 0000:00:12.1: OHCI Host Controller
[    0.491328] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[    0.491344] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfcdfd000
[    0.551242] hub 4-0:1.0: USB hub found
[    0.551251] hub 4-0:1.0: 3 ports detected
[    0.551310] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.551325] ohci_hcd 0000:00:13.0: OHCI Host Controller
[    0.551351] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[    0.551375] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfcdfc000
[    0.611244] hub 5-0:1.0: USB hub found
[    0.611252] hub 5-0:1.0: 3 ports detected
[    0.611305] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.611320] ohci_hcd 0000:00:13.1: OHCI Host Controller
[    0.611343] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[    0.611359] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfcdfb000
[    0.671264] hub 6-0:1.0: USB hub found
[    0.671270] hub 6-0:1.0: 3 ports detected
[    0.671323] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.671339] ohci_hcd 0000:00:14.5: OHCI Host Controller
[    0.671364] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[    0.671379] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfcdfa000
[    0.731163] usb 1-2: new high speed USB device using ehci_hcd and address 2
[    0.731279] hub 7-0:1.0: USB hub found
[    0.731285] hub 7-0:1.0: 2 ports detected
[    0.731336] uhci_hcd: USB Universal Host Controller Interface driver
[    0.731401] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    0.731743] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.731747] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.731811] mice: PS/2 mouse device common for all mice
[    0.731886] rtc_cmos 00:03: RTC can wake from S4
[    0.731911] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.731933] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.731999] device-mapper: uevent: version 1.0.3
[    0.732072] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[    0.732114] device-mapper: multipath: version 1.1.1 loaded
[    0.732116] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.732183] EISA: Probing bus 0 at eisa.0
[    0.732185] EISA: Cannot allocate resource for mainboard
[    0.732187] Cannot allocate resource for EISA slot 1
[    0.732188] Cannot allocate resource for EISA slot 2
[    0.732190] Cannot allocate resource for EISA slot 3
[    0.732191] Cannot allocate resource for EISA slot 4
[    0.732192] Cannot allocate resource for EISA slot 5
[    0.732194] Cannot allocate resource for EISA slot 6
[    0.732195] Cannot allocate resource for EISA slot 7
[    0.732196] Cannot allocate resource for EISA slot 8
[    0.732198] EISA: Detected 0 cards.
[    0.732238] cpuidle: using governor ladder
[    0.732239] cpuidle: using governor menu
[    0.732436] TCP cubic registered
[    0.732517] NET: Registered protocol family 10
[    0.732766] lo: Disabled Privacy Extensions
[    0.732914] NET: Registered protocol family 17
[    0.732932] powernow-k8: Found 1 AMD Athlon(tm) II X2 245 Processor (2 cpu cores) (version 2.20.00)
[    0.732968] powernow-k8:    0 : pstate 0 (2900 MHz)
[    0.732969] powernow-k8:    1 : pstate 1 (2200 MHz)
[    0.732970] powernow-k8:    2 : pstate 2 (1700 MHz)
[    0.732972] powernow-k8:    3 : pstate 3 (800 MHz)
[    0.747129] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    0.764470] isapnp: No Plug & Play device found
[    0.764573] Using IPI No-Shortcut mode
[    0.764730] PM: Resume from disk failed.
[    0.764738] registered taskstats version 1
[    0.764941]   Magic number: 14:903:74
[    0.765020] rtc_cmos 00:03: setting system clock to 2010-10-16 11:03:57 UTC (1287227037)
[    0.765022] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.765023] EDD information not available.
[    0.765069] Freeing unused kernel memory: 684k freed
[    0.765306] Write protecting the kernel text: 4932k
[    0.765333] Write protecting the kernel read-only data: 1976k
[    0.781753] udev[75]: starting version 163
[    0.847346] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.847365] r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.847398] r8169 0000:02:00.0: setting latency timer to 64
[    0.847441]   alloc irq_desc for 42 on node -1
[    0.847442]   alloc kstat_irqs on node -1
[    0.847453] r8169 0000:02:00.0: irq 42 for MSI/MSI-X
[    0.847806] r8169 0000:02:00.0: eth0: RTL8168b/8111b at 0xf8096000, 00:26:18:6e:fc:da, XID 18000000 IRQ 42
[    0.860815] scsi0 : pata_atiixp
[    0.871175] scsi1 : pata_atiixp
[    0.872282] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[    0.872285] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[    0.872547] ahci 0000:00:11.0: version 3.0
[    0.872567]   alloc irq_desc for 22 on node -1
[    0.872569]   alloc kstat_irqs on node -1
[    0.872575] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    0.872622]   alloc irq_desc for 43 on node -1
[    0.872623]   alloc kstat_irqs on node -1
[    0.872632] ahci 0000:00:11.0: irq 43 for MSI/MSI-X
[    0.872720] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[    0.872723] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[    0.874958] scsi2 : ahci
[    0.875031] scsi3 : ahci
[    0.875145] scsi4 : ahci
[    0.875184] scsi5 : ahci
[    0.875285] ata3: SATA max UDMA/133 abar m1024@0xfcdffc00 port 0xfcdffd00 irq 43
[    0.875289] ata4: SATA max UDMA/133 abar m1024@0xfcdffc00 port 0xfcdffd80 irq 43
[    0.875291] ata5: SATA max UDMA/133 abar m1024@0xfcdffc00 port 0xfcdffe00 irq 43
[    0.875294] ata6: SATA max UDMA/133 abar m1024@0xfcdffc00 port 0xfcdffe80 irq 43
[    1.056050] usb 1-4: new high speed USB device using ehci_hcd and address 3
[    1.056522] ata1.00: ATAPI: TSSTcorpCD/DVDW SH-S182M, SB02, max UDMA/33
[    1.056870] ata1.01: ATA-5: ST340016A, 3.75, max UDMA/100
[    1.056873] ata1.01: 78165360 sectors, multi 16: LBA
[    1.072438] ata1.00: configured for UDMA/33
[    1.088624] ata1.01: configured for UDMA/100
[    1.090051] scsi 0:0:0:0: CD-ROM            TSSTcorp CD/DVDW SH-S182M SB02 PQ: 0 ANSI: 5
[    1.097032] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.097036] Uniform CD-ROM driver Revision: 3.20
[    1.097141] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    1.097191] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    1.097281] scsi 0:0:1:0: Direct-Access     ATA      ST340016A        3.75 PQ: 0 ANSI: 5
[    1.097368] sd 0:0:1:0: Attached scsi generic sg1 type 0
[    1.097547] sd 0:0:1:0: [sda] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB)
[    1.097653] sd 0:0:1:0: [sda] Write Protect is off
[    1.097656] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
[    1.097679] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA


[Navyseal]

continuação

Código Selecionar Expandir


[    1.097829]  sda: sda1 sda2
[    1.116503] sd 0:0:1:0: [sda] Attached SCSI disk
[    1.172051] ata5: SATA link down (SStatus 0 SControl 300)
[    1.172080] ata4: SATA link down (SStatus 0 SControl 300)
[    1.172380] ata6: SATA link down (SStatus 0 SControl 300)
[    1.195425] Initializing USB Mass Storage driver...
[    1.195528] scsi6 : usb-storage 1-4:1.0
[    1.195589] usbcore: registered new interface driver usb-storage
[    1.195590] USB Mass Storage support registered.
[    1.336050] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.336989] ata3.00: ATA-8: ST3250318AS, CC35, max UDMA/133
[    1.336992] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.338122] ata3.00: configured for UDMA/133
[    1.352181] scsi 2:0:0:0: Direct-Access     ATA      ST3250318AS      CC35 PQ: 0 ANSI: 5
[    1.352321] sd 2:0:0:0: Attached scsi generic sg2 type 0
[    1.352383] sd 2:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    1.352445] sd 2:0:0:0: [sdb] Write Protect is off
[    1.352448] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.352472] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.352632]  sdb: sdb1 sdb2
[    1.380932] sd 2:0:0:0: [sdb] Attached SCSI disk
[    1.720687] EXT3-fs: barriers not enabled
[    1.737296] kjournald starting.  Commit interval 5 seconds
[    1.737313] EXT3-fs (sda2): mounted filesystem with ordered data mode
[    2.192744] scsi 6:0:0:0: Direct-Access              USB 2.0          5.00 PQ: 0 ANSI: 2
[    2.193109] sd 6:0:0:0: Attached scsi generic sg3 type 0
[    2.194476] sd 6:0:0:0: [sdc] 4136960 512-byte logical blocks: (2.11 GB/1.97 GiB)
[    2.194977] sd 6:0:0:0: [sdc] Write Protect is off
[    2.194981] sd 6:0:0:0: [sdc] Mode Sense: 0b 00 00 08
[    2.194983] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[    2.196728] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[    2.196735]  sdc: sdc4
[    2.198979] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[    2.198983] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[   20.342193] udev[433]: starting version 163
[   20.347344] Adding 1028156k swap on /dev/sdb2.  Priority:-1 extents:1 across:1028156k
[   20.438693] ACPI: resource piix4_smbus [io  0x0b00-0x0b07] conflicts with ACPI region SOR1 [??? 0x00000b00-0x00000b0f flags 0x31]
[   20.438696] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   20.518601] Linux agpgart interface v0.103
[   20.541338] parport_pc 00:06: reported by Plug and Play ACPI
[   20.541411] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   20.544222] lp: driver loaded but no devices found
[   20.550367] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[   20.550370] Disabling lock debugging due to kernel taint
[   20.552051] Linux video capture interface: v2.00
[   20.554987] uvcvideo: Found UVC 1.00 device <unnamed> (046d:09a4)
[   20.586872] ppdev: user-space parallel port driver
[   20.611234] input: UVC Camera (046d:09a4) as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2:1.0/input/input3
[   20.611283] usbcore: registered new interface driver uvcvideo
[   20.611285] USB Video Class driver (v0.1.0)
[   20.619507] [fglrx] Maximum main memory to use for locked dma buffers: 1884 MBytes.
[   20.619730] [fglrx]   vendor: 1002 device: 9490 count: 1
[   20.620216] [fglrx] ioport: bar 4, base 0xd000, size: 0x100
[   20.620230] pci 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   20.620235] pci 0000:01:00.0: setting latency timer to 64
[   20.620488] [fglrx] Kernel PAT support is enabled
[   20.620506] [fglrx] module loaded - fglrx 8.78.30 [Sep 20 2010] with 1 minors
[   20.632515] lp0: using parport0 (interrupt-driven).
[   20.669503] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   20.669624] IR NEC protocol handler initialized
[   20.671941] IR RC5(x) protocol handler initialized
[   20.673221] cx88/0: cx2388x v4l2 driver version 0.0.8 loaded
[   20.673255]   alloc irq_desc for 21 on node -1
[   20.673257]   alloc kstat_irqs on node -1
[   20.673262] cx8800 0000:03:07.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[   20.673628] IR RC6 protocol handler initialized
[   20.674940] cx88[0]: Your board has no valid PCI Subsystem ID and thus can't
[   20.674941] cx88[0]: be autodetected.  Please pass card=<n> insmod option to
[   20.674942] cx88[0]: workaround that.  Redirect complaints to the vendor of
[   20.674943] cx88[0]: the TV card.  Best regards,
[   20.674944] cx88[0]:         -- tux
[   20.675123] cx88[0]: Here is a list of valid choices for the card=<n> insmod option:
[   20.675161] cx88[0]:    card=0 -> UNKNOWN/GENERIC
[   20.675198] cx88[0]:    card=1 -> Hauppauge WinTV 34xxx models
[   20.675234] cx88[0]:    card=2 -> GDI Black Gold
[   20.675277] cx88[0]:    card=3 -> PixelView
[   20.675312] cx88[0]:    card=4 -> ATI TV Wonder Pro
[   20.675351] cx88[0]:    card=5 -> Leadtek Winfast 2000XP Expert
[   20.675388] cx88[0]:    card=6 -> AverTV Studio 303 (M126)
[   20.675425] cx88[0]:    card=7 -> MSI TV-@nywhere Master
[   20.675469] cx88[0]:    card=8 -> Leadtek Winfast DV2000
[   20.675505] cx88[0]:    card=9 -> Leadtek PVR 2000
[   20.675552] cx88[0]:    card=10 -> IODATA GV-VCP3/PCI
[   20.675597] cx88[0]:    card=11 -> Prolink PlayTV PVR
[   20.675633] cx88[0]:    card=12 -> ASUS PVR-416
[   20.675668] cx88[0]:    card=13 -> MSI TV-@nywhere
[   20.675704] cx88[0]:    card=14 -> KWorld/VStream XPert DVB-T
[   20.675740] cx88[0]:    card=15 -> DViCO FusionHDTV DVB-T1
[   20.675776] cx88[0]:    card=16 -> KWorld LTV883RF
[   20.675811] cx88[0]:    card=17 -> DViCO FusionHDTV 3 Gold-Q
[   20.675850] cx88[0]:    card=18 -> Hauppauge Nova-T DVB-T
[   20.675887] cx88[0]:    card=19 -> Conexant DVB-T reference design
[   20.675941] cx88[0]:    card=20 -> Provideo PV259
[   20.675999] cx88[0]:    card=21 -> DViCO FusionHDTV DVB-T Plus
[   20.676064] cx88[0]:    card=22 -> pcHDTV HD3000 HDTV
[   20.676102] cx88[0]:    card=23 -> digitalnow DNTV Live! DVB-T
[   20.676140] cx88[0]:    card=24 -> Hauppauge WinTV 28xxx (Roslyn) models
[   20.676178] cx88[0]:    card=25 -> Digital-Logic MICROSPACE Entertainment Center (MEC)
[   20.676224] cx88[0]:    card=26 -> IODATA GV/BCTV7E
[   20.676289] cx88[0]:    card=27 -> PixelView PlayTV Ultra Pro (Stereo)
[   20.676346] cx88[0]:    card=28 -> DViCO FusionHDTV 3 Gold-T
[   20.676384] cx88[0]:    card=29 -> ADS Tech Instant TV DVB-T PCI
[   20.676423] cx88[0]:    card=30 -> TerraTec Cinergy 1400 DVB-T
[   20.676461] cx88[0]:    card=31 -> DViCO FusionHDTV 5 Gold
[   20.676499] cx88[0]:    card=32 -> AverMedia UltraTV Media Center PCI 550
[   20.676537] cx88[0]:    card=33 -> Kworld V-Stream Xpert DVD
[   20.676575] cx88[0]:    card=34 -> ATI HDTV Wonder
[   20.676612] cx88[0]:    card=35 -> WinFast DTV1000-T
[   20.676649] cx88[0]:    card=36 -> AVerTV 303 (M126)
[   20.676687] cx88[0]:    card=37 -> Hauppauge Nova-S-Plus DVB-S
[   20.676725] cx88[0]:    card=38 -> Hauppauge Nova-SE2 DVB-S
[   20.676762] cx88[0]:    card=39 -> KWorld DVB-S 100
[   20.676800] cx88[0]:    card=40 -> Hauppauge WinTV-HVR1100 DVB-T/Hybrid
[   20.676838] cx88[0]:    card=41 -> Hauppauge WinTV-HVR1100 DVB-T/Hybrid (Low Profile)
[   20.676879] cx88[0]:    card=42 -> digitalnow DNTV Live! DVB-T Pro
[   20.676917] cx88[0]:    card=43 -> KWorld/VStream XPert DVB-T with cx22702
[   20.676955] cx88[0]:    card=44 -> DViCO FusionHDTV DVB-T Dual Digital
[   20.676993] cx88[0]:    card=45 -> KWorld HardwareMpegTV XPert
[   20.677031] cx88[0]:    card=46 -> DViCO FusionHDTV DVB-T Hybrid
[   20.677069] cx88[0]:    card=47 -> pcHDTV HD5500 HDTV
[   20.677106] cx88[0]:    card=48 -> Kworld MCE 200 Deluxe
[   20.677144] cx88[0]:    card=49 -> PixelView PlayTV P7000
[   20.677182] cx88[0]:    card=50 -> NPG Tech Real TV FM Top 10
[   20.677206] IR JVC protocol handler initialized
[   20.677220] cx88[0]:    card=51 -> WinFast DTV2000 H
[   20.677258] cx88[0]:    card=52 -> Geniatech DVB-S
[   20.677296] cx88[0]:    card=53 -> Hauppauge WinTV-HVR3000 TriMode Analog/DVB-S/DVB-T
[   20.677336] cx88[0]:    card=54 -> Norwood Micro TV Tuner
[   20.677374] cx88[0]:    card=55 -> Shenzhen Tungsten Ages Tech TE-DTV-250 / Swann OEM
[   20.677415] cx88[0]:    card=56 -> Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder
[   20.677456] cx88[0]:    card=57 -> ADS Tech Instant Video PCI
[   20.677493] cx88[0]:    card=58 -> Pinnacle PCTV HD 800i
[   20.677531] cx88[0]:    card=59 -> DViCO FusionHDTV 5 PCI nano
[   20.677569] cx88[0]:    card=60 -> Pinnacle Hybrid PCTV
[   20.677607] cx88[0]:    card=61 -> Leadtek TV2000 XP Global
[   20.677645] cx88[0]:    card=62 -> PowerColor RA330
[   20.677682] cx88[0]:    card=63 -> Geniatech X8000-MT DVBT
[   20.677719] cx88[0]:    card=64 -> DViCO FusionHDTV DVB-T PRO
[   20.677758] cx88[0]:    card=65 -> DViCO FusionHDTV 7 Gold
[   20.677796] cx88[0]:    card=66 -> Prolink Pixelview MPEG 8000GT
[   20.677834] cx88[0]:    card=67 -> Kworld PlusTV HD PCI 120 (ATSC 120)
[   20.677872] cx88[0]:    card=68 -> Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid
[   20.677911] cx88[0]:    card=69 -> Hauppauge WinTV-HVR4000(Lite) DVB-S/S2
[   20.677954] cx88[0]:    card=70 -> TeVii S460 DVB-S/S2
[   20.677991] cx88[0]:    card=71 -> Omicom SS4 DVB-S/S2 PCI
[   20.678032] cx88[0]:    card=72 -> TBS 8920 DVB-S/S2
[   20.678070] cx88[0]:    card=73 -> TeVii S420 DVB-S
[   20.678107] cx88[0]:    card=74 -> Prolink Pixelview Global Extreme
[   20.678145] cx88[0]:    card=75 -> PROF 7300 DVB-S/S2
[   20.678183] cx88[0]:    card=76 -> SATTRADE ST4200 DVB-S/S2
[   20.678220] cx88[0]:    card=77 -> TBS 8910 DVB-S
[   20.678257] cx88[0]:    card=78 -> Prof 6200 DVB-S
[   20.678294] cx88[0]:    card=79 -> Terratec Cinergy HT PCI MKII
[   20.678332] cx88[0]:    card=80 -> Hauppauge WinTV-IR Only
[   20.678370] cx88[0]:    card=81 -> Leadtek WinFast DTV1800 Hybrid
[   20.678408] cx88[0]:    card=82 -> WinFast DTV2000 H rev. J
[   20.678446] cx88[0]:    card=83 -> Prof 7301 DVB-S/S2
[   20.678483] cx88[0]:    card=84 -> Samsung SMT 7020 DVB-S
[   20.678522] cx88[0]: subsystem: 0000:0000, board: UNKNOWN/GENERIC [card=0,autodetected], frontend(s): 0
[   20.678523] cx88[0]: TV tuner type -1, Radio tuner type -1
[   20.679773] IR Sony protocol handler initialized
[   20.681696] lirc_dev: IR Remote Control driver registered, major 250
[   20.682524] IR LIRC bridge handler initialized
[   20.697301] type=1400 audit(1287223457.429:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=749 comm="apparmor_parser"
[   20.697556] type=1400 audit(1287223457.429:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=749 comm="apparmor_parser"
[   20.697672] type=1400 audit(1287223457.429:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=749 comm="apparmor_parser"
[   20.713031] HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[   20.713070]   alloc irq_desc for 44 on node -1
[   20.713072]   alloc kstat_irqs on node -1
[   20.713081] HDA Intel 0000:01:00.1: irq 44 for MSI/MSI-X
[   20.713102] HDA Intel 0000:01:00.1: setting latency timer to 64
[   20.728240] psmouse serio1: ID: 10 00 64
[   20.738749] set volume quirk for QuickCam E3500
[   20.738878] usbcore: registered new interface driver snd-usb-audio
[   20.806908] tuner 0-0061: chip found @ 0xc2 (cx88[0])
[   20.807772] tveeprom 0-0050: Huh, no eeprom present (err=-6)?
[   20.810347] cx88[0]/0: found at 0000:03:07.0, rev: 5, irq: 21, latency: 64, mmio: 0xfd000000
[   20.810461] cx88[0]/0: registered device video1 [v4l2]
[   20.810519] cx88[0]/0: registered device vbi0
[   20.810527] tuner 0-0061: tuner type not set
[   20.823171] EXT3-fs (sda2): using internal journal
[   21.303195] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[   21.412522] type=1400 audit(1287223458.145:5): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=1144 comm="apparmor_parser"
[   21.413353] type=1400 audit(1287223458.145:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=1151 comm="apparmor_parser"
[   21.413557] type=1400 audit(1287223458.145:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1151 comm="apparmor_parser"
[   21.413673] type=1400 audit(1287223458.145:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1151 comm="apparmor_parser"
[   21.415170] type=1400 audit(1287223458.145:9): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1162 comm="apparmor_parser"
[   21.415460] type=1400 audit(1287223458.145:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1164 comm="apparmor_parser"
[   21.416309] type=1400 audit(1287223458.145:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1164 comm="apparmor_parser"
[   21.418520] r8169 0000:02:00.0: eth0: link up
[   21.418528] r8169 0000:02:00.0: eth0: link up
[   21.955900]   alloc irq_desc for 45 on node -1
[   21.955903]   alloc kstat_irqs on node -1
[   21.955912] fglrx_pci 0000:01:00.0: irq 45 for MSI/MSI-X
[   21.956406] [fglrx] Firegl kernel thread PID: 1356
[   21.956592] [fglrx] IRQ 45 Enabled
[   22.772828] [fglrx] Gart USWC size:628 M.
[   22.772831] [fglrx] Gart cacheable size:247 M.
[   22.772835] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[   22.772837] [fglrx] Reserved FB block: Unshared offset:fe07000, size:1f9000
[   22.772839] [fglrx] Reserved FB block: Unshared offset:3fffb000, size:5000
[   26.754175] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[   31.856027] eth0: no IPv6 routers present
[ 1435.592482] show_signal_msg: 9 callbacks suppressed
[ 1435.592494] tvtime[11178]: segfault at 6b0 ip 0804cf64 sp bfc792cc error 4 in tvtime[8048000+76000]
[ 1448.944987] tvtime[11181]: segfault at 6b0 ip 0804cf64 sp bfc6f39c error 4 in tvtime[8048000+76000]
[ 1544.276115] tvtime[11310]: segfault at 6b0 ip 0804cf64 sp bfc46d6c error 4 in tvtime[8048000+76000]
[ 1989.593378] tvtime[12667]: segfault at 6b0 ip 0804cf64 sp bfd679cc error 4 in tvtime[8048000+76000]
[ 3039.510510] tvtime[13005]: segfault at 6b0 ip 0804cf64 sp bfccad7c error 4 in tvtime[8048000+76000]

[Navyseal]

Quando corro na consola o tvtime:

Código Selecionar Expandir

Running tvtime 1.0.2.
Reading configuration from /etc/tvtime/tvtime.xml
Reading configuration from /home/navyseal/.tvtime/tvtime.xml
videoinput: Driver won't tell us its norm: Argumento inválido
videoinput: Can't get tuner info: Argumento inválido

    Your capture card driver: uvcvideo [UVC Camera (046d:09a4)/usb-0000:00:12.2-2/256]
    does not support full size studio-quality images required by tvtime.
    This is true for many low-quality webcams.  Please select a
    different video device for tvtime to use with the command line
    option --device.

mixer: Can't open device /dev/mixer, mixer volume and mute unavailable.
Found "USB Device 0x46d:0x9a4 : USB Audio (hw:2,0)"
Segmentation fail

Podem ajudar-me?

[Tota]

Ola,

Faça uma pesquisa aqui no forum pelo perfil do usuario mstr

a maioria dos topicos referentes a placas de captura são respostas dele

pesquise também pelo modelo de sua placa

existem varios topicos indicando como configurá-la


[]'s

[Navyseal]

Pois e eu já pesquisei, só que não resolveu e a placa continua a dar o mesmo problema, neste caso a ler a webcam em vez da placa pci.

[Tota]

Ola,

Se fez a pesquisa como cita, verificou que isto está errado

[   20.678522] cx88[0]: subsystem: 0000:0000, board: UNKNOWN/GENERIC [card=0,autodetected], frontend(s): 0
[   20.678523] cx88[0]: TV tuner type -1, Radio tuner type -1
......
......
[   20.810347] cx88[0]/0: found at 0000:03:07.0, rev: 5, irq: 21, latency: 64, mmio: 0xfd000000
[   20.810461] cx88[0]/0: registered device video1 [v4l2]
[   20.810519] cx88[0]/0: registered device vbi0
[   20.810527] tuner 0-0061: tuner type not set

Então corrija o tuner e o card de acordo com o sugeridos nos topicos para sua placa, assim ela será reconhecida como /dev/video1 e voce poderá trocar de video0 ( sua web cam ) para video1 ( sua placa ) no tv time

Voce pode até setar para /dev/video1 agora, mas sem o tuner ajustado, nenhum canal será recebido.

Boas pesquisas.

[]'s

[Navyseal]

Sim já fiz isso, mas não tenho som. :/