Instalar modem discada resolvido

[henderlite]

Ola amigos, estou precisando de ajuda. ñ entendo nada de linux estou queredo usar o ubuntu 10.04. de um comando LSPCI e retornou isso:

Código Selecionar Expandir


To run a command as administrator (user "root"), use "sudo <command>".
See "man sudo_root" for details.

ubuntu@ubuntu:~$ lspci
00:00.0 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.1 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.7 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South]
00:08.0 Modem: PCTel Inc HSP56 MicroModem (rev 04)
00:09.0 Multimedia video controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder (rev 05)
00:09.1 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] (rev 05)
00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] (rev a1)
ubuntu@ubuntu:~$



o modem indentificado foi esse

Código Selecionar Expandir


00:08.0 Modem: PCTel Inc HSP56 MicroModem (rev 04)


fui no Centro de Ajuda Ubuntu e tinha pra fazer download este arquivo http://linmodems.technion.ac.il/packages/scanModem.gz depois tinha estes comandos

Código Selecionar Expandir

gunzip -c scanModem.gz > scanModem
chmod +x scanModem
sudo ./scanModem
gedit Modem/ModemData.txt

e o arquivo modemdata.txt isto

Código Selecionar Expandir

Only plain text email is forwarded by the  Discuss@Linmodems.org List Server,
as HTML can contain viruses. Use as the email Subject Line:
          YourName, YourCountry  kernel 2.6.32-21-generic
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@Linmodems.org are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
--------------------------  System information ----------------------------
CPU=i686,  Ubuntu ,  ALSA_version=1.0.21
Linux version 2.6.32-21-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010
scanModem update of:  2010_05_29

Distrib_ID=Ubuntu
DistribCodeName=lucid
AptRepositoryStem=http://archive.ubuntu.com/ubuntu


Presently install your Linux Distributions dkms package. It provides for automated driver updates,
following upgrade of your kernel.  For details see http://linux.dell.com/projects.shtml#dkms

There are no blacklisted modem drivers in /etc/modprobe*  files

Potentially useful modem drivers now loaded are:
                 

Attached USB devices are:
ID 12bd:e001  
If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html
A sample report is:  http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html

If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@linmodems.org

Candidate PCI devices with modem chips are:
00:08.0 Modem: PCTel Inc HSP56 MicroModem (rev 04)
High Definition Audio cards can host modem chips.

For candidate card in slot 00:08.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:08.0 134d:2189 134d:1002 Modem: PCTel Inc HSP56 MicroModem

Modem interrupt assignment and sharing:
--- Bootup diagnostics for card in PCI slot 00:08.0 ----
[    0.098342] pci 0000:00:08.0: reg 10 32bit mmio: [0xfebfe000-0xfebfefff]
[    0.098350] pci 0000:00:08.0: reg 14 io port: [0xb800-0xb8ff]
[    0.098392] pci 0000:00:08.0: PME# supported from D0 D3hot D3cold
[    0.098398] pci 0000:00:08.0: PME# disabled
[    2.647472] serial 0000:00:08.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    2.647585] 0000:00:08.0: ttyS1 at I/O 0xb808 (irq = 17) is a 16450
[    2.647654] 0000:00:08.0: ttyS2 at I/O 0xb810 (irq = 17) is a 8250
[    2.647721] 0000:00:08.0: ttyS3 at I/O 0xb818 (irq = 17) is a 16450
[    2.647744] Couldn't register serial port 0000:00:08.0: -28

The PCI slot 00:08.0 of the modem card may be disabled early in
a bootup process,  but then enabled later. If modem drivers load
but the  modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@linmodems.org
if help is needed.


=== Finished firmware and bootup diagnostics, next deducing cogent software. ===

Predictive  diagnostics for card in bus 00:08.0:
Modem chipset  detected on
NAME="Modem: PCTel Inc HSP56 MicroModem "
CLASS=0703
PCIDEV=134d:2189
SUBSYS=134d:1002
IRQ=17
IDENT=slamr

For candidate modem in:  00:08.0
  0703 Modem: PCTel Inc HSP56 MicroModem
     Primary device ID:  134d:2189
Support type needed or chipset: slamr


134d:2189  is a PCTel HSP56 MicroModem 688T modem with the Oasis chipset.
Under 2.6.n kernels, it is only supported through the Smartlink slamr.ko driver.

The modem is supported by the Smartlink slamr
plus the slmodemd helper utility.  Read the
DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow through guidance.


For 2.6.32-21-generic compiling drivers is necessary. As of October 2007 the current packages at
http://linmodems.technion.ac.il/packages/smartlink/  are the
ungrab-winmodem-20070505.tar.gz and slmodem-2.9.11-20080126.tar.gz

Writing DOCs/Smartlink.txt
============ end Smartlink section =====================

Completed candidate modem analyses.

The base of the UDEV device file system is: /dev/.udev

Versions adequately match for the compiler installed: 4.4.3
            and the compiler used in kernel assembly: 4.4.3

The patch utility is needed for compiling ALSA drivers, and possibly others.


Minimal compiling resources appear complete:
  make utility - /usr/bin/make
  Compiler version 4.4
  linuc_headers base folder /lib/modules/2.6.32-21-generic/build

However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed in  /usr/include/ .
For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default.
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.




If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$  apt-get update
$  apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb


Checking pppd properties:
-rwsr-xr-- 1 root dip 273312 2010-03-07 03:59 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
   http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
$ su - root  (not for Ubuntu)
       sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd

Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx

In case of a message like:
  Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html

For guidance on FAX usage, get from http://linmodems.technion.ac.il/packages/  get faxing.tar.gz
It has samples for a modem using port /dev/ttySL0, which must be changed to match your modem's port.

Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.

Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================

Checking for modem support lines:
--------------------------------------
    /device/modem symbolic link:  
slmodemd created symbolic link /dev/ttySL0:  
    Within /etc/udev/ files:

    Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
    Within any ancient /etc/devfs files:

    Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------


como instalo ele.
agradeco a ajuda de todos.
atenciosamente

[livre1]

Já tentou ver se é compativel?



http://ubuntuforum-br.org/index.php/topic,4204.0.html

[alarcon]

abre um terminal e digita os seguintes comandos:

lspci

e

lspci -n

cola aqui o resultado. Atenção que a primeira letra dos dois comandos acime é o L minúsculo ok.

Estou suspeitando que seu modem para conexão discada pode ter que usar o driver PC-Tel e não o smartlink que é o usado no link que o livre recomendou.

[henderlite]

 
desde ja quero agradecer pela atenção. o problema foi resolvido. conforme o link postado, baixei o arquivo executei conforme o passo-a-passo e esta uma maravilha.

Código Selecionar Expandir

george@george-desktop:~$ lspci
00:00.0 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.1 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.7 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South]
00:08.0 Modem: PCTel Inc HSP56 MicroModem (rev 04)
00:09.0 Multimedia video controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder (rev 05)
00:09.1 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] (rev 05)
00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] (rev a1)
george@george-desktop:~$ lspci -n
00:00.0 0600: 1106:0204
00:00.1 0600: 1106:1204
00:00.2 0600: 1106:2204
00:00.3 0600: 1106:3204
00:00.4 0600: 1106:4204
00:00.7 0600: 1106:7204
00:01.0 0604: 1106:b188
00:08.0 0703: 134d:2189 (rev 04)
00:09.0 0400: 14f1:8800 (rev 05)
00:09.1 0480: 14f1:8801 (rev 05)
00:0f.0 0104: 1106:3149 (rev 80)
00:0f.1 0101: 1106:0571 (rev 06)
00:10.0 0c03: 1106:3038 (rev 81)
00:10.1 0c03: 1106:3038 (rev 81)
00:10.2 0c03: 1106:3038 (rev 81)
00:10.3 0c03: 1106:3038 (rev 81)
00:10.4 0c03: 1106:3104 (rev 86)
00:11.0 0601: 1106:3227
00:11.5 0401: 1106:3059 (rev 60)
00:12.0 0200: 1106:3065 (rev 78)
00:18.0 0600: 1022:1100
00:18.1 0600: 1022:1101
00:18.2 0600: 1022:1102
00:18.3 0600: 1022:1103
01:00.0 0300: 10de:0322 (rev a1)
george@george-desktop:~$

estão os codigo que me pediram ai em cima.

o modem esta funcionando uma beleza.
>:(agora falta so a plca de tv PlayTV Xtreme global

atenciosamente
uma abraço pra todos e um bom fim de semana e otima eleição.

[alarcon]

desde ja quero agradecer pela atenção. o problema foi resolvido. conforme o link postado, baixei o arquivo executei conforme o passo-a-passo e esta uma maravilha.

Código Selecionar Expandir

george@george-desktop:~$ lspci
00:00.0 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.1 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.7 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South]
00:08.0 Modem: PCTel Inc HSP56 MicroModem (rev 04)
00:09.0 Multimedia video controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder (rev 05)
00:09.1 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] (rev 05)
00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] (rev a1)
george@george-desktop:~$ lspci -n
00:00.0 0600: 1106:0204
00:00.1 0600: 1106:1204
00:00.2 0600: 1106:2204
00:00.3 0600: 1106:3204
00:00.4 0600: 1106:4204
00:00.7 0600: 1106:7204
00:01.0 0604: 1106:b188
00:08.0 0703: 134d:2189 (rev 04)
00:09.0 0400: 14f1:8800 (rev 05)
00:09.1 0480: 14f1:8801 (rev 05)
00:0f.0 0104: 1106:3149 (rev 80)
00:0f.1 0101: 1106:0571 (rev 06)
00:10.0 0c03: 1106:3038 (rev 81)
00:10.1 0c03: 1106:3038 (rev 81)
00:10.2 0c03: 1106:3038 (rev 81)
00:10.3 0c03: 1106:3038 (rev 81)
00:10.4 0c03: 1106:3104 (rev 86)
00:11.0 0601: 1106:3227
00:11.5 0401: 1106:3059 (rev 60)
00:12.0 0200: 1106:3065 (rev 78)
00:18.0 0600: 1022:1100
00:18.1 0600: 1022:1101
00:18.2 0600: 1022:1102
00:18.3 0600: 1022:1103
01:00.0 0300: 10de:0322 (rev a1)
george@george-desktop:~$

estão os codigo que me pediram ai em cima.

o modem esta funcionando uma beleza.

atenciosamente
uma abraço pra todos e um bom fim de semana e otima eleição.

Ah desculpe-me nem havia notado que as informações que tinha pedido já estavam no seu primeiro post.

O seu modem HSP56 MicroModem realmente era um que tem suporte no driver smartlink, aliás este é o único, todos os outros tipos de modem chamado HSP56 MicroModem só tem suporte no driver PC-Tel. HSP56 MR (Via) e HSP56 MR (SiS) não são a mesma coisa do HSP56 MicroModem ok.

Por gentileza edite no seu primeiro texto deste tópico o título e acrescente a palavra resolvido.