Problemas com o K3B no Kubuntu 5.10

[Kobayashi]

Pessoal,

Não estou conseguindo gravar CDs (CD RW) usando o K3B... quando tento, dá mensagens de erro e não grava. Eis o que mostra saída do depurador do K3B:

System
-----------------------
K3b Version: 0.12

KDE Version: 3.4.3
QT Version:  3.3.4
Kernel:      2.6.12-10-386
Devices
-----------------------
HL-DT-ST CD-RW GCE-8520B 1.00 (/dev/hdc, ) at /media/cdrom0 [CD-R; CD-RW; CD-ROM] [CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R]

K3b
-----------------------
Size of filesystem calculated: 9488

Used versions
-----------------------
mkisofs: 2.1-unofficial-iconv
cdrecord: 2.1.1a01

cdrecord
-----------------------
/usr/bin/X11/cdrecord: Warning: Running on Linux-2.6.12-10-386
/usr/bin/X11/cdrecord: There are unsettled issues with Linux-2.5 and newer.
/usr/bin/X11/cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
scsidev: '/dev/hdc'
devname: '/dev/hdc'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
/usr/bin/X11/cdrecord: Warning: using inofficial version of libscg (ubuntu-0.8ubuntu1 '@(#)scsitransp.c 1.91 04/06/17 Copyright 1988,1995,2000-2004 J. Schilling').
SCSI buffer size: 64512
Cdrecord-Clone 2.01.01a01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Joerg Schilling
NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord
     and thus may have bugs that are not present in the original version.
     Please send bug reports and support requests to <cdrtools@packages.debian.org>.
     The original author should not be bothered with problems of this version.
TOC Type: 3 = CD-ROM XA mode 2
Using libscg version 'ubuntu-0.8ubuntu1'.
Driveropts: 'burnfree'
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   :
Vendor_info    : 'HL-DT-ST'
Identifikation : 'CD-RW GCE-8520B '
Revision       : '1.00'
Device seems to be: Generic mmc CD-RW.
Current: 0x000A
Profile: 0x000A (current)
Profile: 0x0009
Profile: 0x0008
Profile: 0x0002 (current)
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-2 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1467136 = 1432 KB
FIFO size      : 4194304 = 4096 KB
Track 01: data    18 MB        
Total size:       21 MB (02:06.53) = 9490 sectors
Lout start:       21 MB (02:08/40) = 9490 sectors
Current Secsize: 2048
ATIP info from disk:
 Indicated writing power: 5
 Reference speed: 2
 Is not unrestricted
 Is erasable
 ATIP start of lead in:  -11650 (97:26/50)
 ATIP start of lead out: 337349 (74:59/74)
 1T speed low:  0 (reserved val  0) 1T speed high:  4
 2T speed low:  0 (reserved val  5) 2T speed high:  0 (reserved val 10)
 power mult factor: 2 6
 recommended erase/write power: 3
 A1 values: 02 2C B0
 A2 values: 5A A4 26
Disk type:    Phase change
Manuf. index: 10
Manufacturer: Lead Data Inc.
Blocks total: 337349 Blocks current: 337349 Blocks remaining: 327859
Starting to write CD/DVD at speed 4 in real TAO mode for multi session.
Last chance to quit, starting real write in 2 seconds.
  1 seconds.
  0 seconds. Operation starts.
/usr/bin/X11/cdrecord: Caught interrupt.

cdrecord command:
-----------------------
/usr/bin/X11/cdrecord.mmap -v gracetime=2 dev=/dev/hdc speed=9295394 -tao driveropts=burnfree -eject -multi -xa -tsize=9488s -

mkisofs
-----------------------
9488
INFO: UTF-8 character encoding detected by locale settings.
Assuming UTF-8 encoded filenames on source filesystem,
use -input-charset to override.
Incorrectly encoded string (Segurança na Internet.doc) encountered.
Possibly creating an invalid Joliet extension. Aborting.

mkisofs command:
-----------------------
/usr/bin/X11/mkisofs -gui -graft-points -volid K3b data project -volset  -appid K3B THE CD KREATOR (C) 1998-2005 SEBASTIAN TRUEG AND THE K3B TEAM -publisher  -preparer  -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-root/k3blCfHGb.tmp -rational-rock -hide-list /tmp/kde-root/k3bfQgZeb.tmp -joliet -hide-joliet-list /tmp/kde-root/k3bNqHDHa.tmp -full-iso9660-filenames -iso-level 2 -path-list /tmp/kde-root/k3bfw3C2a.tmp

Pelo que entendi, está dizendo que o cdrecord tem problemas com o Kernel 2.5 e mais novos. Eu desinstalei o K3B e o cdrecord e os baixei novamente dos repositórios oficiais, mas o problema continua...

Como consigo resolver ?  :cry:

[gony64]

rapaz.. o problema tá parecendo que é no locales não? "utf8" tenta mudar isto ai no sistema pra ver...!

e também parece que tu tá querendo criar um disco de multi-sessão?