Instalação da Placa PixelView M4900 no Ubuntu 9.04

[GilmarCampos]

Eu coloquei a placa no meu computador e o TVTIME tah sem sinal
Isso eh o que recebo de bttv e tuner.
O que tenho que fazer?
Alguém me ajuda?

[   14.228964] bttv: driver version 0.9.17 loaded
[   14.228971] bttv: using 8 buffers with 2080k (520 pages) each for capture
[   14.229435] bttv: Bt8xx card found (0).
[   14.229475] bttv 0000:00:08.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   14.229490] bttv0: Bt878 (rev 17) at 0000:00:08.0, irq: 16, latency: 64, mmio: 0xf7fff000
[   14.229688] bttv0: detected: Prolink Pixelview PV-BT [card=72], PCI subsystem ID is 1554:4011
[   14.229694] bttv0: using: Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM) [card=72,autodetected]
[   14.229763] bttv0: gpio: en=00000000, out=00000000 in=006fc0ff [init]
[   14.229949] bttv0: tuner type=5
[   14.229955] bttv0: i2c: checking for TDA7432 @ 0x8a... not found
[   14.616090] bttv0: registered device video0
[   14.616253] bttv0: registered device vbi0
[   14.616394] bttv0: registered device radio0
[   14.616421] bttv0: PLL: 28636363 => 35468950 .. ok
[   14.648823] input: bttv IR (card=72) as /devices/pci0000:00/0000:00:08.0/input/input6
[  295.922928] bttv0: PLL can sleep, using XTAL (28636363).

[   14.229949] bttv0: tuner type=5
[   14.306256] psmouse serio1: ID: 10 00 64<6>tuner' 1-0061: chip found @ 0xc2 (bt878 #0 [sw])
[   14.608441] tuner-simple 1-0061: creating new instance
[   14.608449] tuner-simple 1-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
[   14.609575] tuner' 1-0063: chip found @ 0xc6 (bt878 #0 [sw])

[jomafras]

Comece por aqui :

http://ubuntuforum-br.org/index.php/topic,12577.0.html
http://ubuntuforum-br.org/index.php/topic,23572.0.html

[GilmarCampos]

Pintinho,
Eu segui os passos do 12577. Criei o modprobe.conf e o modprobe.d/options, e não deu certo
Creio que o driver da minha placa eh outro.
Tem jeito de fazer um passo a passo. Se sim estou encaminhando lspci:

00:00.0 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
00:00.1 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. PT890 Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
00:00.7 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237/VX700 PCI Bridge
00:09.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
00:09.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
00:0f.0 IDE interface: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78)
01:00.0 VGA compatible controller: VIA Technologies, Inc. CN700/P4M800 Pro/P4M800 CE/VN800 [S3 UniChrome Pro] (rev 01)

Aguardo retorno, obrigado.

[jomafras]

O driver para sua placa é o bt878 (conexant).
Vc precisa primeiro encontrar card e tuner da sua placa (no segundo link que te passei tem dicas para encontrar).
Depois é que vc configura o modprobe.d/options (com card e tuner corretos).

[mstr]

tenta esse link

http://mstr.ueuo.com/bttv/instalar.php?id=bttv&c=139&i=a

[GilmarCampos]

Pintinho,

Tive o seguinte resultado do passo-a-passo:

dmesg | grep bttv | grep subsystem
[   14.492430] bttv0: detected: Prolink Pixelview PV-BT [card=72], PCI subsystem ID is 1554:4011

dmesg | grep tuner (depois de colocar i2c_scan=1)
[   14.492688] bttv0: tuner type=5
[   14.582075] tuner' 1-0061: chip found @ 0xc2 (bt878 #0 [sw])
[   14.745063] tuner-simple 1-0061: creating new instance
[   14.745071] tuner-simple 1-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
[   14.746197] tuner' 1-0063: chip found @ 0xc6 (bt878 #0 [sw])

Configurei o options (Eu criei o arquivo, não tem ele no 9.04)
options bt878 card=72 tuner=5

Continua sem sinal (me parece que é a minha inexperiência).

Mstr,
Como fica a configuração do arquivo captura com esses dados?


Aguardo retorno...