Sistema travando, não abre aplicativos, boot lento.

Iniciado por xThustoonx, 19 de Março de 2006, 17:36

tópico anterior - próximo tópico
Imprimir
Ir para Fim Páginas 1 2
Ações

Alysson Neto

#15
20 de Março de 2006, 17:06
Cara uma coisa que vi no log do seu boot ele ta demorando no ntpdate, então vamo limpar esse boot, se tu não usar laptop da pra tirar o bluez-utils, ntpdate, fetchmail, pcmcia, atd, dns-clean, evms, lvm, mdamd, mdamd-raid, ppp,  ppp-dns

Para saber mais:
http://www.ubuntuforums.org/showthread.php?t=89491&highlight=faster+feel
"Eu rejeito sua realidade e substituo pela minha" Adam Savage,

xThustoonx

#16
21 de Março de 2006, 15:19
N3t0 e o que é esse problema de só abrir aplicativos depois que desconectar? CAra, eu desconecto da internet e volta ao normal, conecto e da problema. Não faço ideia do que pode ser isso. E o som também não consigo fazer funcionar.

Alysson Neto

#17
22 de Março de 2006, 00:10
Me copia os logs : user.log e syslog vamo ver o que acontece enquanto tu usa a maquina. e quanto ao boot, deu certo?
"Eu rejeito sua realidade e substituo pela minha" Adam Savage,

xThustoonx

#18
22 de Março de 2006, 14:53
Esse é o user.log
Código Selecionar
Mar 20 13:47:28 localhost gconfd (root-8226): SIGHUP recebido, recarregando todos os bancos de dados
Mar 20 13:47:28 localhost gconfd (root-8226): Endereço "xml:readonly:/etc/gconf/gconf.xml.mandatory" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 0
Mar 20 13:47:28 localhost gconfd (root-8226): Endereço "xml:readonly:/usr/share/gconf/local.mandatory" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 1
Mar 20 13:47:28 localhost gconfd (root-8226): O endereço "xml:readwrite:/root/.gconf" resolvido para uma fonte de configuração com permissões de escrita na posição 2
Mar 20 13:47:28 localhost gconfd (root-8226): Endereço "xml:readonly:/etc/gconf/gconf.xml.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 3
Mar 20 13:47:28 localhost gconfd (root-8226): Endereço "xml:readonly:/usr/share/gconf/local.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 4
Mar 20 13:47:28 localhost gconfd (root-8226): Endereço "xml:readonly:/usr/share/gconf/cdd.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 5
Mar 20 13:47:28 localhost gconfd (root-8226): Endereço "xml:readonly:/usr/share/gconf/debian.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 6
Mar 20 13:47:28 localhost gconfd (root-8226): Endereço "xml:readonly:/var/lib/gconf/defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 7
Mar 20 13:47:28 localhost gconfd (root-8226): O servidor GConf não está sendo usado, desligando.
Mar 20 13:47:28 localhost gconfd (root-8226): Terminando
Mar 20 13:49:30 localhost gconfd (root-8499): iniciando (versão 2.12.0), pid 8499 usuário 'root'
Mar 20 13:49:30 localhost gconfd (root-8499): Endereço "xml:readonly:/etc/gconf/gconf.xml.mandatory" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 0
Mar 20 13:49:30 localhost gconfd (root-8499): Endereço "xml:readonly:/usr/share/gconf/local.mandatory" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 1
Mar 20 13:49:30 localhost gconfd (root-8499): O endereço "xml:readwrite:/root/.gconf" resolvido para uma fonte de configuração com permissões de escrita na posição 2
Mar 20 13:49:30 localhost gconfd (root-8499): Endereço "xml:readonly:/etc/gconf/gconf.xml.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 3
Mar 20 13:49:30 localhost gconfd (root-8499): Endereço "xml:readonly:/usr/share/gconf/local.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 4
Mar 20 13:49:30 localhost gconfd (root-8499): Endereço "xml:readonly:/usr/share/gconf/cdd.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 5
Mar 20 13:49:30 localhost gconfd (root-8499): Endereço "xml:readonly:/usr/share/gconf/debian.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 6
Mar 20 13:49:30 localhost gconfd (root-8499): Endereço "xml:readonly:/var/lib/gconf/defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 7
Mar 20 13:52:25 localhost gconfd (thustoon-6660): Terminando
Mar 20 13:52:26 localhost shutdown[6168]: shutting down for system reboot
Mar 20 13:52:30 localhost gconfd (root-8499): O servidor GConf não está sendo usado, desligando.
Mar 20 13:52:30 localhost gconfd (root-8499): Terminando
Mar 20 13:58:53 localhost hpiod: 0.9.5 accepting connections at 32769...
Mar 20 13:58:53 localhost hp: unable to open /var/run/hplip/hpssd.port: No such file or directory: prnt/hpijs/hplip_api.c 84
Mar 20 13:59:04 localhost python: hpssd [ERROR] Unable to connect to hpiod.
Mar 20 13:59:21 localhost gconfd (thustoon-6660): iniciando (versão 2.12.0), pid 6660 usuário 'thustoon'
Mar 20 13:59:21 localhost gconfd (thustoon-6660): Endereço "xml:readonly:/etc/gconf/gconf.xml.mandatory" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 0
Mar 20 13:59:21 localhost gconfd (thustoon-6660): Endereço "xml:readonly:/usr/share/gconf/local.mandatory" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 1
Mar 20 13:59:21 localhost gconfd (thustoon-6660): O endereço "xml:readwrite:/home/thustoon/.gconf" resolvido para uma fonte de configuração com permissões de escrita na posição 2
Mar 20 13:59:21 localhost gconfd (thustoon-6660): Endereço "xml:readonly:/etc/gconf/gconf.xml.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 3
Mar 20 13:59:21 localhost gconfd (thustoon-6660): Endereço "xml:readonly:/usr/share/gconf/local.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 4
Mar 20 13:59:21 localhost gconfd (thustoon-6660): Endereço "xml:readonly:/usr/share/gconf/cdd.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 5
Mar 20 13:59:21 localhost gconfd (thustoon-6660): Endereço "xml:readonly:/usr/share/gconf/debian.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 6
Mar 20 13:59:21 localhost gconfd (thustoon-6660): Endereço "xml:readonly:/var/lib/gconf/defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 7
Mar 20 13:59:46 localhost gconfd (thustoon-6660): O endereço "xml:readwrite:/home/thustoon/.gconf" resolvido para uma fonte de configuração com permissões de escrita na posição 0
Mar 20 14:02:41 localhost gconfd (root-7242): iniciando (versão 2.12.0), pid 7242 usuário 'root'
Mar 20 14:02:41 localhost gconfd (root-7242): Endereço "xml:readonly:/etc/gconf/gconf.xml.mandatory" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 0
Mar 20 14:02:41 localhost gconfd (root-7242): Endereço "xml:readonly:/usr/share/gconf/local.mandatory" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 1
Mar 20 14:02:41 localhost gconfd (root-7242): O endereço "xml:readwrite:/root/.gconf" resolvido para uma fonte de configuração com permissões de escrita na posição 2
Mar 20 14:02:41 localhost gconfd (root-7242): Endereço "xml:readonly:/etc/gconf/gconf.xml.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 3
Mar 20 14:02:41 localhost gconfd (root-7242): Endereço "xml:readonly:/usr/share/gconf/local.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 4
Mar 20 14:02:41 localhost gconfd (root-7242): Endereço "xml:readonly:/usr/share/gconf/cdd.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 5
Mar 20 14:02:41 localhost gconfd (root-7242): Endereço "xml:readonly:/usr/share/gconf/debian.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 6
Mar 20 14:02:41 localhost gconfd (root-7242): Endereço "xml:readonly:/var/lib/gconf/defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 7
Mar 20 14:05:23 localhost gconfd (thustoon-6660): Recebido sinal 15, desligando corretamente
Mar 20 14:05:23 localhost gconfd (thustoon-6660): Terminando
Mar 21 02:08:30 localhost hpiod: 0.9.5 accepting connections at 32769...
Mar 21 02:08:31 localhost hp: unable to open /var/run/hplip/hpssd.port: No such file or directory: prnt/hpijs/hplip_api.c 84
Mar 21 02:08:39 localhost python: hpssd [ERROR] Unable to connect to hpiod.
Mar 21 02:08:56 localhost gconfd (thustoon-6659): iniciando (versão 2.12.0), pid 6659 usuário 'thustoon'
Mar 21 02:08:56 localhost gconfd (thustoon-6659): Endereço "xml:readonly:/etc/gconf/gconf.xml.mandatory" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 0
Mar 21 02:08:56 localhost gconfd (thustoon-6659): Endereço "xml:readonly:/usr/share/gconf/local.mandatory" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 1
Mar 21 02:08:56 localhost gconfd (thustoon-6659): O endereço "xml:readwrite:/home/thustoon/.gconf" resolvido para uma fonte de configuração com permissões de escrita na posição 2
Mar 21 02:08:56 localhost gconfd (thustoon-6659): Endereço "xml:readonly:/etc/gconf/gconf.xml.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 3
Mar 21 02:08:56 localhost gconfd (thustoon-6659): Endereço "xml:readonly:/usr/share/gconf/local.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 4
Mar 21 02:08:56 localhost gconfd (thustoon-6659): Endereço "xml:readonly:/usr/share/gconf/cdd.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 5
Mar 21 02:08:56 localhost gconfd (thustoon-6659): Endereço "xml:readonly:/usr/share/gconf/debian.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 6
Mar 21 02:08:56 localhost gconfd (thustoon-6659): Endereço "xml:readonly:/var/lib/gconf/defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 7
Mar 21 02:09:20 localhost gconfd (thustoon-6659): O endereço "xml:readwrite:/home/thustoon/.gconf" resolvido para uma fonte de configuração com permissões de escrita na posição 0
Mar 21 02:15:17 localhost gconfd (root-7545): iniciando (versão 2.12.0), pid 7545 usuário 'root'
Mar 21 02:15:17 localhost gconfd (root-7545): Endereço "xml:readonly:/etc/gconf/gconf.xml.mandatory" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 0
Mar 21 02:15:17 localhost gconfd (root-7545): Endereço "xml:readonly:/usr/share/gconf/local.mandatory" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 1
Mar 21 02:15:17 localhost gconfd (root-7545): O endereço "xml:readwrite:/root/.gconf" resolvido para uma fonte de configuração com permissões de escrita na posição 2
Mar 21 02:15:17 localhost gconfd (root-7545): Endereço "xml:readonly:/etc/gconf/gconf.xml.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 3
Mar 21 02:15:17 localhost gconfd (root-7545): Endereço "xml:readonly:/usr/share/gconf/local.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 4
Mar 21 02:15:17 localhost gconfd (root-7545): Endereço "xml:readonly:/usr/share/gconf/cdd.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 5
Mar 21 02:15:17 localhost gconfd (root-7545): Endereço "xml:readonly:/usr/share/gconf/debian.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 6
Mar 21 02:15:17 localhost gconfd (root-7545): Endereço "xml:readonly:/var/lib/gconf/defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 7
Mar 21 02:15:47 localhost gconfd (root-7545): O servidor GConf não está sendo usado, desligando.
Mar 21 02:15:47 localhost gconfd (root-7545): Terminando
Mar 21 02:20:04 localhost hp: unable to connect hpiod socket 32769: Connection timed out: prnt/hpijs/hplip_api.c 693
Mar 21 02:23:00 localhost gconfd (thustoon-6659): Recebido sinal 15, desligando corretamente
Mar 21 02:23:00 localhost gconfd (thustoon-6659): Terminando
Mar 21 04:35:23 localhost hp: unable to open /var/run/hplip/hpiod.port: No such file or directory: prnt/hpijs/hplip_api.c 75
Mar 21 04:35:24 localhost hpiod: 0.9.5 accepting connections at 32770...
Mar 21 04:35:36 localhost python: hpssd [ERROR] Unable to connect to hpiod.
Mar 21 04:35:47 localhost gconfd (thustoon-6663): iniciando (versão 2.12.0), pid 6663 usuário 'thustoon'
Mar 21 04:35:47 localhost gconfd (thustoon-6663): Endereço "xml:readonly:/etc/gconf/gconf.xml.mandatory" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 0
Mar 21 04:35:47 localhost gconfd (thustoon-6663): Endereço "xml:readonly:/usr/share/gconf/local.mandatory" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 1
Mar 21 04:35:47 localhost gconfd (thustoon-6663): O endereço "xml:readwrite:/home/thustoon/.gconf" resolvido para uma fonte de configuração com permissões de escrita na posição 2
Mar 21 04:35:47 localhost gconfd (thustoon-6663): Endereço "xml:readonly:/etc/gconf/gconf.xml.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 3
Mar 21 04:35:47 localhost gconfd (thustoon-6663): Endereço "xml:readonly:/usr/share/gconf/local.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 4
Mar 21 04:35:47 localhost gconfd (thustoon-6663): Endereço "xml:readonly:/usr/share/gconf/cdd.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 5
Mar 21 04:35:47 localhost gconfd (thustoon-6663): Endereço "xml:readonly:/usr/share/gconf/debian.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 6
Mar 21 04:35:47 localhost gconfd (thustoon-6663): Endereço "xml:readonly:/var/lib/gconf/defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 7
Mar 21 04:36:12 localhost gconfd (thustoon-6663): O endereço "xml:readwrite:/home/thustoon/.gconf" resolvido para uma fonte de configuração com permissões de escrita na posição 0
Mar 21 04:39:21 localhost gconfd (thustoon-6663): Recebido sinal 15, desligando corretamente
Mar 21 04:39:21 localhost gconfd (thustoon-6663): Terminando
Mar 21 04:39:31 localhost shutdown[6171]: shutting down for system halt
Mar 21 08:35:10 localhost hp: unable to open /var/run/hplip/hpiod.port: No such file or directory: prnt/hpijs/hplip_api.c 75
Mar 21 08:35:10 localhost hpiod: 0.9.5 accepting connections at 32769...
Mar 21 08:35:20 localhost python: hpssd [ERROR] Unable to connect to hpiod.
Mar 21 08:35:46 localhost gconfd (thustoon-6661): iniciando (versão 2.12.0), pid 6661 usuário 'thustoon'
Mar 21 08:35:46 localhost gconfd (thustoon-6661): Endereço "xml:readonly:/etc/gconf/gconf.xml.mandatory" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 0
Mar 21 08:35:46 localhost gconfd (thustoon-6661): Endereço "xml:readonly:/usr/share/gconf/local.mandatory" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 1
Mar 21 08:35:46 localhost gconfd (thustoon-6661): O endereço "xml:readwrite:/home/thustoon/.gconf" resolvido para uma fonte de configuração com permissões de escrita na posição 2
Mar 21 08:35:46 localhost gconfd (thustoon-6661): Endereço "xml:readonly:/etc/gconf/gconf.xml.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 3
Mar 21 08:35:46 localhost gconfd (thustoon-6661): Endereço "xml:readonly:/usr/share/gconf/local.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 4
Mar 21 08:35:46 localhost gconfd (thustoon-6661): Endereço "xml:readonly:/usr/share/gconf/cdd.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 5
Mar 21 08:35:46 localhost gconfd (thustoon-6661): Endereço "xml:readonly:/usr/share/gconf/debian.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 6
Mar 21 08:35:46 localhost gconfd (thustoon-6661): Endereço "xml:readonly:/var/lib/gconf/defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 7
Mar 21 08:36:12 localhost gconfd (thustoon-6661): O endereço "xml:readwrite:/home/thustoon/.gconf" resolvido para uma fonte de configuração com permissões de escrita na posição 0

xThustoonx

#19
22 de Março de 2006, 14:57
Esse é o syslog
[code]Mar 21 02:18:17 localhost syslogd 1.4.1#17ubuntu3: restart.
Mar 21 02:18:17 localhost anacron[6498]: Job `cron.daily' terminated (mailing output)
Mar 21 02:18:17 localhost anacron[6498]: Can't find sendmail at /usr/sbin/sendmail, not mailing output
Mar 21 02:18:17 localhost anacron[6498]: Normal exit (1 job run)
Mar 21 02:20:04 localhost hp: unable to connect hpiod socket 32769: Connection timed out: prnt/hpijs/hplip_api.c 693
Mar 21 02:22:58 localhost init: Switching to runlevel: 0
Mar 21 02:23:00 localhost gconfd (thustoon-6659): Recebido sinal 15, desligando corretamente
Mar 21 02:23:00 localhost gconfd (thustoon-6659): Terminando
Mar 21 02:23:04 localhost kernel: [4295743.119000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
Mar 21 02:23:04 localhost kernel: [4295743.119000] apm: disabled on user request.
Mar 21 02:23:16 localhost sdpd[6469]: terminating...  
Mar 21 02:23:17 localhost kernel: Kernel logging (proc) stopped.
Mar 21 02:23:17 localhost kernel: Kernel log daemon terminating.
Mar 21 02:23:17 localhost exiting on signal 15
Mar 21 04:35:15 localhost syslogd 1.4.1#17ubuntu3: restart.
Mar 21 04:35:15 localhost kernel: Inspecting /boot/System.map-2.6.12-10-386
Mar 21 04:35:16 localhost kernel: Loaded 29010 symbols from /boot/System.map-2.6.12-10-386.
Mar 21 04:35:16 localhost kernel: Symbols match kernel version 2.6.12.
Mar 21 04:35:16 localhost kernel: No module symbols loaded - kernel modules not enabled.
Mar 21 04:35:16 localhost kernel: [4294667.296000] Linux version 2.6.12-10-386 (buildd@terranova) (gcc version 3.4.5 20050809 (prerelease) (Ubuntu 3.4.4-6ubuntu8.1)) #1 Sat Mar 11 16:13:17 UTC 2006
Mar 21 04:35:16 localhost kernel: [4294667.296000] BIOS-provided physical RAM map:
Mar 21 04:35:16 localhost kernel: [4294667.296000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Mar 21 04:35:16 localhost kernel: [4294667.296000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Mar 21 04:35:16 localhost kernel: [4294667.296000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Mar 21 04:35:16 localhost kernel: [4294667.296000]  BIOS-e820: 0000000000100000 - 000000000fffd000 (usable)
Mar 21 04:35:16 localhost kernel: [4294667.296000]  BIOS-e820: 000000000fffd000 - 000000000ffff000 (ACPI data)
Mar 21 04:35:16 localhost kernel: [4294667.296000]  BIOS-e820: 000000000ffff000 - 0000000010000000 (ACPI NVS)
Mar 21 04:35:16 localhost kernel: [4294667.296000]  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Mar 21 04:35:16 localhost kernel: [4294667.296000] 0MB HIGHMEM available.
Mar 21 04:35:16 localhost kernel: [4294667.296000] 255MB LOWMEM available.
Mar 21 04:35:16 localhost kernel: [4294667.296000] On node 0 totalpages: 65533
Mar 21 04:35:16 localhost kernel: [4294667.296000]   DMA zone: 4096 pages, LIFO batch:1
Mar 21 04:35:16 localhost kernel: [4294667.296000]   Normal zone: 61437 pages, LIFO batch:31
Mar 21 04:35:16 localhost kernel: [4294667.296000]   HighMem zone: 0 pages, LIFO batch:1
Mar 21 04:35:16 localhost kernel: [4294667.296000] DMI 2.0 present.
Mar 21 04:35:16 localhost kernel: [4294667.296000] ACPI: RSDP (v000 ASUS                                  ) @ 0x000f7980
Mar 21 04:35:16 localhost kernel: [4294667.296000] ACPI: RSDT (v001 ASUS   P2-99    0x58582e31 ASUS 0x31303030) @ 0x0fffd000
Mar 21 04:35:16 localhost kernel: [4294667.296000] ACPI: FADT (v001 ASUS   P2-99    0x58582e31 ASUS 0x31303030) @ 0x0fffd080
Mar 21 04:35:16 localhost kernel: [4294667.296000] ACPI: BOOT (v001 ASUS   P2-99    0x58582e31 ASUS 0x31303030) @ 0x0fffd040
Mar 21 04:35:16 localhost kernel: [4294667.296000] ACPI: DSDT (v001   ASUS P2-99    0x00001000 MSFT 0x01000001) @ 0x00000000
Mar 21 04:35:16 localhost kernel: [4294667.296000] ACPI: PM-Timer IO Port: 0xe408
Mar 21 04:35:16 localhost kernel: [4294667.296000] Allocating PCI resources starting at 10000000 (gap: 10000000:efff0000)
Mar 21 04:35:16 localhost kernel: [4294667.296000] Built 1 zonelists
Mar 21 04:35:16 localhost kernel: [4294667.296000] Kernel command line: root=/dev/mapper/Ubuntu-root ro quiet splash
Mar 21 04:35:16 localhost kernel: [4294667.296000] Local APIC disabled by BIOS -- you can enable it with "lapic"
Mar 21 04:35:16 localhost kernel: [4294667.296000] mapped APIC to ffffd000 (01201000)
Mar 21 04:35:16 localhost kernel: [4294667.296000] Initializing CPU#0
Mar 21 04:35:16 localhost kernel: [4294667.296000] PID hash table entries: 1024 (order: 10, 16384 bytes)
Mar 21 04:35:16 localhost kernel: [4294667.296000] Detected 701.796 MHz processor.
Mar 21 04:35:16 localhost kernel: [4294667.296000] Using pmtmr for high-res timesource
Mar 21 04:35:16 localhost kernel: [4294667.296000] Console: colour VGA+ 80x25
Mar 21 04:35:16 localhost kernel: [4294670.701000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Mar 21 04:35:16 localhost kernel: [4294670.702000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Mar 21 04:35:16 localhost kernel: [4294670.733000] Memory: 251140k/262132k available (1416k kernel code, 10296k reserved, 762k data, 224k init, 0k highmem)
Mar 21 04:35:16 localhost kernel: [4294670.733000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
Mar 21 04:35:16 localhost kernel: [4294670.733000] Calibrating delay loop... 1392.64 BogoMIPS (lpj=696320)
Mar 21 04:35:16 localhost kernel: [4294670.755000] Security Framework v1.0.0 initialized
Mar 21 04:35:16 localhost kernel: [4294670.755000] SELinux:  Disabled at boot.
Mar 21 04:35:16 localhost kernel: [4294670.755000] Mount-cache hash table entries: 512
Mar 21 04:35:16 localhost kernel: [4294670.755000] CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
Mar 21 04:35:16 localhost kernel: [4294670.755000] CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
Mar 21 04:35:16 localhost kernel: [4294670.755000] CPU: L1 I cache: 16K, L1 D cache: 16K
Mar 21 04:35:16 localhost kernel: [4294670.755000] CPU: L2 cache: 256K
Mar 21 04:35:16 localhost kernel: [4294670.755000] CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
Mar 21 04:35:16 localhost kernel: [4294670.755000] CPU: Intel Pentium III (Coppermine) stepping 03
Mar 21 04:35:16 localhost kernel: [4294670.755000] Enabling fast FPU save and restore... done.
Mar 21 04:35:16 localhost kernel: [4294670.755000] Enabling unmasked SIMD FPU exception support... done.
Mar 21 04:35:16 localhost kernel: [4294670.755000] Checking 'hlt' instruction... OK.
Mar 21 04:35:16 localhost kernel: [4294670.759000] Checking for popad bug... OK.
Mar 21 04:35:16 localhost kernel: [4294670.759000] checking if image is initramfs... it is
Mar 21 04:35:16 localhost kernel: [4294671.905000] Freeing initrd memory: 5172k freed
Mar 21 04:35:16 localhost kernel: [4294671.907000] ACPI: Looking for DSDT in initrd... not found!
Mar 21 04:35:16 localhost kernel: [4294672.084000]  not found!
Mar 21 04:35:16 localhost kernel: [4294672.090000] ACPI: setting ELCR to 0200 (from 0e00)
Mar 21 04:35:16 localhost kernel: [4294672.091000] NET: Registered protocol family 16
Mar 21 04:35:16 localhost kernel: [4294672.091000] EISA bus registered
Mar 21 04:35:16 localhost kernel: [4294672.091000] ACPI: bus type pci registered
Mar 21 04:35:16 localhost kernel: [4294672.092000] PCI: PCI BIOS revision 2.10 entry at 0xf0720, last bus=1
Mar 21 04:35:16 localhost kernel: [4294672.092000] PCI: Using configuration type 1
Mar 21 04:35:16 localhost kernel: [4294672.092000] mtrr: v2.0 (20020519)
Mar 21 04:35:16 localhost kernel: [4294672.093000] ACPI: Subsystem revision 20050729
Mar 21 04:35:16 localhost kernel: [4294672.101000] ACPI: Interpreter enabled
Mar 21 04:35:16 localhost kernel: [4294672.102000] ACPI: Using PIC for interrupt routing
Mar 21 04:35:16 localhost kernel: [4294672.103000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
Mar 21 04:35:16 localhost kernel: [4294672.103000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
Mar 21 04:35:16 localhost kernel: [4294672.104000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Mar 21 04:35:16 localhost kernel: [4294672.104000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
Mar 21 04:35:16 localhost kernel: [4294672.105000] ACPI: PCI Root Bridge [PCI0] (0000:00)
Mar 21 04:35:16 localhost kernel: [4294672.105000] PCI: Probing PCI hardware (bus 00)
Mar 21 04:35:16 localhost kernel: [4294672.105000] ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
Mar 21 04:35:16 localhost kernel: [4294672.105000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
Mar 21 04:35:16 localhost kernel: [4294672.110000] Boot video device is 0000:01:00.0
Mar 21 04:35:16 localhost kernel: [4294672.111000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Mar 21 04:35:16 localhost kernel: [4294672.120000] Linux Plug and Play Support v0.97 (c) Adam Belay
Mar 21 04:35:16 localhost kernel: [4294672.120000] pnp: PnP ACPI init
Mar 21 04:35:16 localhost kernel: [4294672.129000] pnp: PnP ACPI: found 12 devices
Mar 21 04:35:16 localhost kernel: [4294672.129000] PnPBIOS: Disabled by ACPI PNP
Mar 21 04:35:16 localhost kernel: [4294672.129000] PCI: Using ACPI for IRQ routing
Mar 21 04:35:16 localhost kernel: [4294672.129000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Mar 21 04:35:16 localhost kernel: [4294672.146000] pnp: 00:01: ioport range 0xe400-0xe43f could not be reserved
Mar 21 04:35:16 localhost kernel: [4294672.146000] pnp: 00:01: ioport range 0xe800-0xe80f has been reserved
Mar 21 04:35:16 localhost kernel: [4294672.146000] Simple Boot Flag at 0x46 set to 0x1
Mar 21 04:35:16 localhost kernel: [4294672.147000] audit: initializing netlink socket (disabled)
Mar 21 04:35:16 localhost kernel: [4294672.147000] audit: initialized
Mar 21 04:35:16 localhost kernel: [4294672.147000] VFS: Disk quotas dquot_6.5.1
Mar 21 04:35:16 localhost kernel: [4294672.147000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Mar 21 04:35:16 localhost kernel: [4294672.147000] devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
Mar 21 04:35:16 localhost kernel: [4294672.148000] devfs: boot_options: 0x0
Mar 21 04:35:16 localhost kernel: [4294672.148000] Initializing Cryptographic API
Mar 21 04:35:16 localhost kernel: [4294672.148000] Limiting direct PCI/PCI transfers.
Mar 21 04:35:16 localhost kernel: [4294672.148000] isapnp: Scanning for PnP cards...
Mar 21 04:35:16 localhost kernel: [4294672.269000] pnp: SB audio device quirk - increasing port range
Mar 21 04:35:16 localhost kernel: [4294672.269000] pnp: AWE32 quirk - adding two ports
Mar 21 04:35:16 localhost kernel: [4294672.269000] isapnp: Card 'Creative SB AWE64 PnP'
Mar 21 04:35:16 localhost kernel: [4294672.270000] isapnp: 1 Plug & Play card detected total
Mar 21 04:35:16 localhost kernel: [4294672.311000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Mar 21 04:35:16 localhost kernel: [4294672.314000] serio: i8042 AUX port at 0x60,0x64 irq 12
Mar 21 04:35:16 localhost kernel: [4294672.314000] serio: i8042 KBD port at 0x60,0x64 irq 1
Mar 21 04:35:16 localhost kernel: [4294672.314000] Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled
Mar 21 04:35:16 localhost kernel: [4294672.314000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Mar 21 04:35:16 localhost kernel: [4294672.314000] ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Mar 21 04:35:16 localhost kernel: [4294672.319000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Mar 21 04:35:16 localhost kernel: [4294672.319000] ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Mar 21 04:35:16 localhost kernel: [4294672.320000] io scheduler noop registered
Mar 21 04:35:16 localhost kernel: [4294672.320000] io scheduler anticipatory registered
Mar 21 04:35:16 localhost kernel: [4294672.320000] io scheduler deadline registered
Mar 21 04:35:16 localhost kernel: [4294672.320000] io scheduler cfq registered
Mar 21 04:35:16 localhost kernel: [4294672.321000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
Mar 21 04:35:16 localhost kernel: [4294672.321000] EISA: Probing bus 0 at eisa.0
Mar 21 04:35:16 localhost kernel: [4294672.321000] EISA: Detected 0 cards.
Mar 21 04:35:16 localhost kernel: [4294672.321000] NET: Registered protocol family 2
Mar 21 04:35:16 localhost kernel: [4294672.330000] IP: routing cache hash table of 2048 buckets, 16Kbytes
Mar 21 04:35:16 localhost kernel: [4294672.330000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
Mar 21 04:35:16 localhost kernel: [4294672.330000] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
Mar 21 04:35:16 localhost kernel: [4294672.331000] TCP: Hash tables configured (established 16384 bind 16384)
Mar 21 04:35:16 localhost kernel: [4294672.331000] NET: Registered protocol family 8
Mar 21 04:35:16 localhost kernel: [4294672.331000] NET: Registered protocol family 20
Mar 21 04:35:16 localhost kernel: [4294672.331000] ACPI wakeup devices:
Mar 21 04:35:16 localhost kernel: [4294672.331000] PCI0 UAR1 UAR2 PS2M USB0
Mar 21 04:35:16 localhost kernel: [4294672.331000] ACPI: (supports S0 S1 S5)
Mar 21 04:35:16 localhost kernel: [4294672.332000] Freeing unused kernel memory: 224k freed
Mar 21 04:35:16 localhost kernel: [4294672.373000] vga16fb: initializing
Mar 21 04:35:16 localhost kernel: [4294672.373000] vga16fb: mapped to 0xc00a0000
Mar 21 04:35:16 localhost kernel: [4294672.507000] Console: switching to colour frame buffer device 80x30
Mar 21 04:35:16 localhost kernel: [4294672.507000] fb0: VGA16 VGA frame buffer device
Mar 21 04:35:16 localhost kernel: [4294672.508000] input: AT Translated Set 2 keyboard on isa0060/serio0
Mar 21 04:35:16 localhost kernel: [4294673.689000] Capability LSM initialized
Mar 21 04:35:16 localhost kernel: [4294673.721000] NET: Registered protocol family 1
Mar 21 04:35:16 localhost kernel: [4294673.754000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Mar 21 04:35:16 localhost kernel: [4294673.754000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Mar 21 04:35:16 localhost kernel: [4294673.754000] ACPI: bus type ide registered
Mar 21 04:35:16 localhost kernel: [4294673.767000] PIIX4: IDE controller at PCI slot 0000:00:04.1
Mar 21 04:35:16 localhost kernel: [4294673.767000] PIIX4: chipset revision 1
Mar 21 04:35:16 localhost kernel: [4294673.767000] PIIX4: not 100%% native mode: will probe irqs later
Mar 21 04:35:16 localhost kernel: [4294673.767000]     ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA
Mar 21 04:35:16 localhost kernel: [4294673.767000]     ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:pio, hdd:DMA
Mar 21 04:35:16 localhost kernel: [4294673.767000] Probing IDE interface ide0...
Mar 21 04:35:16 localhost kernel: [4294674.031000] hda: MAXTOR 6L040J2, ATA DISK drive
Mar 21 04:35:16 localhost kernel: [4294674.286000] hdb: SAMSUNG SV1022D, ATA DISK drive
Mar 21 04:35:16 localhost kernel: [4294674.337000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Mar 21 04:35:16 localhost kernel: [4294674.337000] Probing IDE interface ide1...
Mar 21 04:35:16 localhost kernel: [4294675.264000] hdd: HL-DT-ST GCE-8320B, ATAPI CD/DVD-ROM drive
Mar 21 04:35:16 localhost kernel: [4294675.315000] ide1 at 0x170-0x177,0x376 on irq 15
Mar 21 04:35:16 localhost kernel: [4294675.315000] Probing IDE interface ide2...
Mar 21 04:35:16 localhost kernel: [4294675.828000] Probing IDE interface ide3...
Mar 21 04:35:16 localhost kernel: [4294676.341000] Probing IDE interface ide4...
Mar 21 04:35:16 localhost kernel: [4294676.854000] Probing IDE interface ide5...
Mar 21 04:35:16 localhost kernel: [4294677.377000] hda: max request size: 128KiB
Mar 21 04:35:16 localhost kernel: [4294677.378000] hda: 78177792 sectors (40027 MB) w/1819KiB Cache, CHS=65535/16/63, UDMA(33)
Mar 21 04:35:16 localhost kernel: [4294677.378000] hda: cache flushes supported
Mar 21 04:35:16 localhost kernel: [4294677.379000]  /dev/ide/host0/bus0/target0/lun0: p1
Mar 21 04:35:16 localhost kernel: [4294677.383000] hdb: max request size: 128KiB
Mar 21 04:35:16 localhost kernel: [4294677.389000] hdb: Host Protected Area detected.
Mar 21 04:35:16 localhost kernel: [4294677.389000] ^Icurrent capacity is 19931181 sectors (10204 MB)
Mar 21 04:35:16 localhost kernel: [4294677.389000] ^Inative  capacity is 19931185 sectors (10204 MB)
Mar 21 04:35:16 localhost kernel: [4294677.390000] hdb: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
Mar 21 04:35:16 localhost kernel: [4294677.390000] hdb: task_no_data_intr: error=0x04 { DriveStatusError }
Mar 21 04:35:16 localhost kernel: [4294677.390000] ide: failed opcode was: 0xf9
Mar 21 04:35:16 localhost kernel: [4294677.390000] hdb: 19931181 sectors (10204 MB) w/480KiB Cache, CHS=19772/16/63, UDMA(33)
Mar 21 04:35:16 localhost kernel: [4294677.390000] hdb: cache flushes not supported
Mar 21 04:35:16 localhost kernel: [4294677.390000]  /dev/ide/host0/bus0/target1/lun0:<4>hdb: dma_timer_expiry: dma status == 0x61
Mar 21 04:35:16 localhost kernel: [4294707.390000] hdb: DMA timeout error
Mar 21 04:35:16 localhost kernel: [4294707.390000] hdb: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
Mar 21 04:35:16 localhost kernel: [4294707.390000]
Mar 21 04:35:16 localhost kernel: [4294707.390000] ide: failed opcode was: unknown
Mar 21 04:35:16 localhost kernel: [4294707.495000]  p1 p2 <<4>hdb: dma_timer_expiry: dma status == 0x61
Mar 21 04:35:16 localhost kernel: [4294737.495000] hdb: DMA timeout error
Mar 21 04:35:16 localhost kernel: [4294737.495000] hdb: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
Mar 21 04:35:16 localhost kernel: [4294737.495000]
Mar 21 04:35:16 localhost kernel: [4294737.495000] ide: failed opcode was: unknown
Mar 21 04:35:16 localhost kernel: [4294737.600000]  p5 >
Mar 21 04:35:16 localhost kernel: [4294737.615000] hdd: ATAPI 40X CD-ROM CD-R/RW drive, 8192kB Cache
Mar 21 04:35:16 localhost kernel: [4294737.615000] Uniform CD-ROM driver Revision: 3.20
Mar 21 04:35:16 localhost kernel: [4294738.401000] usbcore: registered new driver usbfs
Mar 21 04:35:16 localhost kernel: [4294738.401000] usbcore: registered new driver hub
Mar 21 04:35:16 localhost kernel: [4294738.405000] USB Universal Host Controller Interface driver v2.2
Mar 21 04:35:16 localhost kernel: [4294738.406000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
Mar 21 04:35:16 localhost kernel: [4294738.406000] PCI: setting IRQ 9 as level-triggered
Mar 21 04:35:16 localhost kernel: [4294738.406000] ACPI: PCI Interrupt 0000:00:04.2[D] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9
Mar 21 04:35:16 localhost kernel: [4294738.406000] uhci_hcd 0000:00:04.2: Intel Corporation 82371AB/EB/MB PIIX4 USB
Mar 21 04:35:16 localhost kernel: [4294738.468000] uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1
Mar 21 04:35:16 localhost kernel: [4294738.468000] uhci_hcd 0000:00:04.2: irq 9, io base 0x0000d400
Mar 21 04:35:16 localhost kernel: [4294738.468000] hub 1-0:1.0: USB hub found
Mar 21 04:35:16 localhost kernel: [4294738.468000] hub 1-0:1.0: 2 ports detected
Mar 21 04:35:16 localhost kernel: [4294738.516000] fealnx.c:v2.51 Nov-17-2001
Mar 21 04:35:16 localhost kernel: [4294738.517000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
Mar 21 04:35:16 localhost kernel: [4294738.517000] PCI: setting IRQ 10 as level-triggered
Mar 21 04:35:16 localhost kernel: [4294738.517000] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
Mar 21 04:35:16 localhost kernel: [4294738.517000] eth0: 100/10M Ethernet PCI Adapter at 0001d000, 00:02:44:59:35:6a, IRQ 10.
Mar 21 04:35:16 localhost kernel: [4294741.279000] ACPI: CPU0 (power states: C1[C1] C2[C2])
Mar 21 04:35:16 localhost kernel: [4294761.355000] hdb: dma_timer_expiry: dma status == 0x61
Mar 21 04:35:16 localhost kernel: [4294771.355000] hdb: DMA timeout error
Mar 21 04:35:16 localhost kernel: [4294771.355000] hdb: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
Mar 21 04:35:16 localhost kernel: [4294771.355000]
Mar 21 04:35:16 localhost kernel: [4294771.355000] ide: failed opcode was: unknown
Mar 21 04:35:16 localhost kernel: [4294791.468000] hdb: dma_timer_expiry: dma status == 0x61
Mar 21 04:35:16 localhost kernel: [4294801.468000] hdb: DMA timeout error
Mar 21 04:35:16 localhost kernel: [4294801.468000] hdb: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
Mar 21 04:35:16 localhost kernel: [4294801.468000]
Mar 21 04:35:16 localhost kernel: [4294801.468000] ide: failed opcode was: unknown
Mar 21 04:35:16 localhost kernel: [4294801.585000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
Mar 21 04:35:16 localhost kernel: [4294801.705000] cdrom: open failed.
Mar 21 04:35:16 localhost kernel: [4294801.969000] Attempting manual resume
Mar 21 04:35:16 localhost kernel: [4294802.008000] swsusp: Suspend partition has wrong signature?
Mar 21 04:35:16 localhost kernel: [4294802.076000] kjournald starting.  Commit interval 5 seconds
Mar 21 04:35:16 localhost kernel: [4294802.076000] EXT3-fs: mounted filesystem with ordered data mode.
Mar 21 04:35:16 localhost kernel: [4294805.722000] md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
Mar 21 04:35:16 localhost kernel: [4294812.551000] Adding 430072k swap on /dev/mapper/Ubuntu-swap_1.  Priority:-1 extents:1
Mar 21 04:35:16 localhost kernel: [4294812.951000] EXT3 FS on dm-0, internal journal
Mar 21 04:35:16 localhost kernel: [4294837.246000] parport: PnPBIOS parport detected.
Mar 21 04:35:16 localhost kernel: [4294837.246000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
Mar 21 04:35:16 localhost kernel: [4294837.335000] lp0: using parport0 (interrupt-driven).
Mar 21 04:35:16 localhost kernel: [4294837.417000] mice: PS/2 mouse device common for all mice
Mar 21 04:35:16 localhost kernel: [4294837.682000] logips2pp: Detected unknown logitech mouse model 0
Mar 21 04:35:16 localhost kernel: [4294837.730000] input: ImExPS/2 Logitech Explorer Mouse on isa0060/serio1
Mar 21 04:35:16 localhost kernel: [4294838.435000] ts: Compaq touchscreen protocol output
Mar 21 04:35:16 localhost kernel: [4294844.038000] cdrom: open failed.
Mar 21 04:35:16 localhost kernel: [4294846.137000] kjournald starting.  Commit interval 5 seconds
Mar 21 04:35:16 localhost kernel: [4294846.146000] EXT3 FS on hdb1, internal journal
Mar 21 04:35:16 localhost kernel: [4294846.146000] EXT3-fs: mounted filesystem with ordered data mode.
Mar 21 04:35:16 localhost kernel: [4294850.175000] Linux agpgart interface v0.101 (c) Dave Jones
Mar 21 04:35:16 localhost kernel: [4294850.203000] agpgart: Detected an Intel 440BX Chipset.
Mar 21 04:35:16 localhost kernel: [4294850.261000] agpgart: AGP aperture is 64M @ 0xe4000000
Mar 21 04:35:16 localhost kernel: [4294850.933000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Mar 21 04:35:16 localhost kernel: [4294850.949000] shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
Mar 21 04:35:16 localhost kernel: [4294850.949000] shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
Mar 21 04:35:16 localhost kernel: [4294852.264000] piix4_smbus 0000:00:04.3: Found 0000:00:04.3 device
Mar 21 04:35:16 localhost kernel: [4294855.827000] Real Time Clock Driver v1.12
Mar 21 04:35:16 localhost kernel: [4294856.246000] input: PC Speaker
Mar 21 04:35:16 localhost kernel: [4294856.644000] Floppy drive(s): fd0 is 1.44M
Mar 21 04:35:16 localhost kernel: [4294856.659000] FDC 0 is a post-1991 82077
Mar 21 04:35:16 localhost kernel: [4294857.668000] pnp: Device 01:01.01 activated.
Mar 21 04:35:16 localhost kernel: [4294857.685000] gameport: NS558 PnP Gameport is pnp01:01.01/gameport0, io 0x200, speed 736kHz
Mar 21 04:35:16 localhost kernel: [4294863.671000] ACPI: Power Button (FF) [PWRF]
Mar 21 04:35:16 localhost kernel: [4294863.671000] ACPI: Power Button (CM) [PWRB]
Mar 21 04:35:16 localhost kernel: [4294863.965000] ibm_acpi: ec object not found
Mar 21 04:35:23 localhost hp: unable to open /var/run/hplip/hpiod.port: No such file or directory: prnt/hpijs/hplip_api.c 75
Mar 21 04:35:24 localhost hpiod: 0.9.5 accepting connections at 32770...
Mar 21 04:35:36 localhost python: hpssd [ERROR] Unable to connect to hpiod.
Mar 21 04:35:37 localhost kernel: [4294886.844000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
Mar 21 04:35:37 localhost kernel: [4294886.844000] apm: overridden by ACPI.
Mar 21 04:35:38 localhost hcid[6469]: Bluetooth HCI daemon
Mar 21 04:35:38 localhost kernel: [4294888.532000] Bluetooth: Core ver 2.7
Mar 21 04:35:38 localhost kernel: [4294888.532000] NET: Registered protocol family 31
Mar 21 04:35:38 localhost kernel: [4294888.532000] Bluetooth: HCI device and connection manager initialized
Mar 21 04:35:38 localhost kernel: [4294888.532000] Bluetooth: HCI socket layer initialized
Mar 21 04:35:38 localhost kernel: [4294888.620000] Bluetooth: L2CAP ver 2.7
Mar 21 04:35:38 localhost kernel: [4294888.620000] Bluetooth: L2CAP socket layer initialized
Mar 21 04:35:38 localhost sdpd[6475]: Bluetooth SDP daemon
Mar 21 04:35:38 localhost kernel: [4294888.674000] Bluetooth: RFCOMM ver 1.5
Mar 21 04:35:38 localhost kernel: [4294888.674000] Bluetooth: RFCOMM socket layer initialized
Mar 21 04:35:38 localhost kernel: [4294888.674000] Bluetooth: RFCOMM TTY layer initialized
Mar 21 04:35:39 localhost anacron[6504]: Anacron 2.3 started on 2006-03-21
Mar 21 04:35:39 localhost anacron[6504]: Normal exit (0 jobs run)
Mar 21 04:35:39 localhost /usr/sbin/cron[6529]: (CRON) INFO (pidfile fd = 3)
Mar 21 04:35:39 localhost /usr/sbin/cron[6530]: (CRON) STARTUP (fork ok)
Mar 21 04:35:39 localhost /usr/sbin/cron[6530]: (CRON) INFO (Running @reboot jobs)
Mar 21 04:35:47 localhost gconfd (thustoon-6663): iniciando (versão 2.12.0), pid 6663 usuário 'thustoon'
Mar 21 04:35:47 localhost gconfd (thustoon-6663): Endereço "xml:readonly:/etc/gconf/gconf.xml.mandatory" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 0
Mar 21 04:35:47 localhost gconfd (thustoon-6663): Endereço "xml:readonly:/usr/share/gconf/local.mandatory" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 1
Mar 21 04:35:47 localhost gconfd (thustoon-6663): O endereço "xml:readwrite:/home/thustoon/.gconf" resolvido para uma fonte de configuração com permissões de escrita na posição 2
Mar 21 04:35:47 localhost gconfd (thustoon-6663): Endereço "xml:readonly:/etc/gconf/gconf.xml.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 3
Mar 21 04:35:47 localhost gconfd (thustoon-6663): Endereço "xml:readonly:/usr/share/gconf/local.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 4
Mar 21 04:35:47 localhost gconfd (thustoon-6663): Endereço "xml:readonly:/usr/share/gconf/cdd.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 5
Mar 21 04:35:47 localhost gconfd (thustoon-6663): Endereço "xml:readonly:/usr/share/gconf/debian.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 6
Mar 21 04:35:47 localhost gconfd (thustoon-6663): Endereço "xml:readonly:/var/lib/gconf/defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 7
Mar 21 04:35:48 localhost kernel: [4294898.374000] NET: Registered protocol family 10
Mar 21 04:35:48 localhost kernel: [4294898.374000] Disabled Privacy Extensions on device c02eb280(lo)
Mar 21 04:35:48 localhost kernel: [4294898.374000] IPv6 over IPv4 tunneling driver
Mar 21 04:36:12 localhost gconfd (thustoon-6663): O endereço "xml:readwrite:/home/thustoon/.gconf" resolvido para uma fonte de configuração com permissões de escrita na posição 0
Mar 21 04:36:56 localhost kernel: [4294965.900000] CSLIP: code copyright 1989 Regents of the University of California
Mar 21 04:36:56 localhost kernel: [4294965.917000] PPP generic driver version 2.4.2
Mar 21 04:36:56 localhost kernel: [4294965.969000] NET: Registered protocol family 24
Mar 21 04:36:58 localhost kernel: [4294967.763000] NET: Registered protocol family 17
Mar 21 04:37:08 localhost kernel: [4294978.433000] eth0: no IPv6 routers present
Mar 21 04:37:13 localhost pppd[7420]: Plugin rp-pppoe.so loaded.
Mar 21 04:37:13 localhost pppd[7422]: pppd 2.4.3 started by root, uid 0
Mar 21 04:37:13 localhost pppd[7422]: PPP session is 5895
Mar 21 04:37:13 localhost pppd[7422]: Using interface ppp0
Mar 21 04:37:13 localhost pppd[7422]: Connect: ppp0 <--> eth0
Mar 21 04:37:13 localhost pppd[7422]: Couldn't increase MTU to 1500
Mar 21 04:37:13 localhost pppd[7422]: Couldn't increase MRU to 1500
Mar 21 04:37:16 localhost pppd[7422]: Couldn't increase MRU to 1500
Mar 21 04:37:18 localhost kernel: [4294987.867000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
Mar 21 04:37:18 localhost kernel: [4294987.867000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
Mar 21 04:37:18 localhost kernel: [4294988.006000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
Mar 21 04:37:18 localhost kernel: [4294988.006000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
Mar 21 04:37:18 localhost pppd[7422]: PAP authentication succeeded
Mar 21 04:37:18 localhost pppd[7422]: peer from calling number 00:90:1A:41:75:AB authorized
Mar 21 04:37:18 localhost pppd[7422]: Cannot determine ethernet address for proxy ARP
Mar 21 04:37:18 localhost pppd[7422]: local  IP address 200.233.246.160
Mar 21 04:37:18 localhost pppd[7422]: remote IP address 200.225.196.87
Mar 21 04:37:18 localhost pppd[7422]: primary   DNS address 200.225.197.34
Mar 21 04:37:18 localhost pppd[7422]: secondary DNS address 200.225.197.37
Mar 21 04:37:18 localhost kernel: [4294988.397000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
Mar 21 04:37:18 localhost kernel: [4294988.397000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
Mar 21 04:37:18 localhost kernel: [4294988.451000] ip_tables: (C) 2000-2002 Netfilter core team
Mar 21 04:37:18 localhost kernel: [4294988.603000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
Mar 21 04:37:18 localhost kernel: [4294988.603000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
Mar 21 04:37:19 localhost kernel: [4294988.893000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
Mar 21 04:37:19 localhost kernel: [4294988.893000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
Mar 21 04:37:19 localhost kernel: [4294989.042000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
Mar 21 04:37:19 localhost kernel: [4294989.042000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
Mar 21 04:37:20 localhost kernel: [4294990.520000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
Mar 21 04:37:20 localhost kernel: [4294990.520000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
Mar 21 04:37:20 localhost kernel: [4294990.669000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
Mar 21 04:37:20 localhost kernel: [4294990.669000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
Mar 21 04:38:42 localhost kernel: [4295072.070000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
Mar 21 04:38:42 localhost kernel: [4295072.070000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
Mar 21 04:38:42 localhost kernel: [4295072.188000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
Mar 21 04:38:42 localhost kernel: [4295072.188000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
Mar 21 04:38:42 localhost kernel: [4295072.553000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
Mar 21 04:38:42 localhost kernel: [4295072.553000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
Mar 21 04:38:43 localhost kernel: [4295072.831000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
Mar 21 04:38:43 localhost kernel: [4295072.831000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
Mar 21 04:38:43 localhost kernel: [4295072.894000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
Mar 21 04:38:43 localhost kernel: [4295072.894000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
Mar 21 04:38:43 localhost kernel: [4295073.036000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
Mar 21 04:38:43 localhost kernel: [4295073.036000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
Mar 21 04:39:21 localhost gconfd (thustoon-6663): Recebido sinal 15, desligando corretamente
Mar 21 04:39:21 localhost gconfd (thustoon-6663): Terminando
Mar 21 04:39:21 localhost gdm[6172]: gdm_slave_xioerror_handler: Erro fatal no X - Reinicializando :0
Mar 21 04:39:31 localhost gdm[6171]: Desligamento mestre...
Mar 21 04:39:31 localhost shutdown[6171]: shutting down for system halt
Mar 21 04:39:32 localhost init: Switching to runlevel: 0
Mar 21 04:39:36 localhost kernel: [4295126.016000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
Mar 21 04:39:36 localhost kernel: [4295126.016000] apm: disabled on user request.
Mar 21 04:39:38 localhost sdpd[6475]: terminating...  
Mar 21 04:39:38 localhost kernel: Kernel logging (proc) stopped.
Mar 21 04:39:38 localhost kernel: Kernel log daemon terminating.
Mar 21 04:39:38 localhost exiting on signal 15
Mar 21 08:35:01 localhost syslogd 1.4.1#17ubuntu3: restart.
Mar 21 08:35:01 localhost kernel: Inspecting /boot/System.map-2.6.12-10-386
Mar 21 08:35:02 localhost kernel: Loaded 29010 symbols from /boot/System.map-2.6.12-10-386.
Mar 21 08:35:02 localhost kernel: Symbols match kernel version 2.6.12.
Mar 21 08:35:02 localhost kernel: No module symbols loaded - kernel modules not enabled.
Mar 21 08:35:02 localhost kernel: [4294667.296000] Linux version 2.6.12-10-386 (buildd@terranova) (gcc version 3.4.5 20050809 (prerelease) (Ubuntu 3.4.4-6ubuntu8.1)) #1 Sat Mar 11 16:13:17 UTC 2006
Mar 21 08:35:02 localhost kernel: [4294667.296000] BIOS-provided physical RAM map:
Mar 21 08:35:02 localhost kernel: [4294667.296000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Mar 21 08:35:02 localhost kernel: [4294667.296000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Mar 21 08:35:02 localhost kernel: [4294667.296000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Mar 21 08:35:02 localhost kernel: [4294667.296000]  BIOS-e820: 0000000000100000 - 000000000fffd000 (usable)
Mar 21 08:35:02 localhost kernel: [4294667.296000]  BIOS-e820: 000000000fffd000 - 000000000ffff000 (ACPI data)
Mar 21 08:35:02 localhost kernel: [4294667.296000]  BIOS-e820: 000000000ffff000 - 0000000010000000 (ACPI NVS)
Mar 21 08:35:02 localhost kernel: [4294667.296000]  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Mar 21 08:35:02 localhost kernel: [4294667.296000] 0MB HIGHMEM available.
Mar 21 08:35:02 localhost kernel: [4294667.296000] 255MB LOWMEM available.
Mar 21 08:35:02 localhost kernel: [4294667.296000] On node 0 totalpages: 65533
Mar 21 08:35:02 localhost kernel: [4294667.296000]   DMA zone: 4096 pages, LIFO batch:1
Mar 21 08:35:02 localhost kernel: [4294667.296000]   Normal zone: 61437 pages, LIFO batch:31
Mar 21 08:35:02 localhost kernel: [4294667.296000]   HighMem zone: 0 pages, LIFO batch:1
Mar 21 08:35:02 localhost kernel: [4294667.296000] DMI 2.0 present.
Mar 21 08:35:02 localhost kernel: [4294667.296000] ACPI: RSDP (v000 ASUS                                  ) @ 0x000f7980
Mar 21 08:35:02 localhost kernel: [4294667.296000] ACPI: RSDT (v001 ASUS   P2-99    0x58582e31 ASUS 0x31303030) @ 0x0fffd000
Mar 21 08:35:02 localhost kernel: [4294667.296000] ACPI: FADT (v001 ASUS   P2-99    0x58582e31 ASUS 0x31303030) @ 0x0fffd080
Mar 21 08:35:02 localhost kernel: [4294667.296000] ACPI: BOOT (v001 ASUS   P2-99    0x58582e31 ASUS 0x31303030) @ 0x0fffd040
Mar 21 08:35:02 localhost kernel: [4294667.296000] ACPI: DSDT (v001   ASUS P2-99    0x00001000 MSFT 0x01000001) @ 0x00000000
Mar 21 08:35:02 localhost kernel: [4294667.296000] ACPI: PM-Timer IO Port: 0xe408
Mar 21 08:35:02 localhost kernel: [4294667.296000] Allocating PCI resources starting at 10000000 (gap: 10000000:efff0000)
Mar 21 08:35:02 localhost kernel: [4294667.296000] Built 1 zonelists
Mar 21 08:35:02 localhost kernel: [4294667.296000] Kernel command line: root=/dev/mapper/Ubuntu-root ro quiet splash
Mar 21 08:35:02 localhost kernel: [4294667.296000] Local APIC disabled by BIOS -- you can enable it with "lapic"
Mar 21 08:35:02 localhost kernel: [4294667.296000] mapped APIC to ffffd000 (01201000)
Mar 21 08:35:02 localhost kernel: [4294667.296000] Initializing CPU#0
Mar 21 08:35:02 localhost kernel: [4294667.296000] PID hash table entries: 1024 (order: 10, 16384 bytes)
Mar 21 08:35:02 localhost kernel: [4294667.296000] Detected 701.792 MHz processor.
Mar 21 08:35:02 localhost kernel: [4294667.296000] Using pmtmr for high-res timesource
Mar 21 08:35:02 localhost kernel: [4294667.296000] Console: colour VGA+ 80x25
Mar 21 08:35:02 localhost kernel: [4294670.607000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Mar 21 08:35:02 localhost kernel: [4294670.609000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Mar 21 08:35:02 localhost kernel: [4294670.640000] Memory: 251140k/262132k available (1416k kernel code, 10296k reserved, 762k data, 224k init, 0k highmem)
Mar 21 08:35:02 localhost kernel: [4294670.640000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
Mar 21 08:35:02 localhost kernel: [4294670.640000] Calibrating delay loop... 1392.64 BogoMIPS (lpj=696320)
Mar 21 08:35:02 localhost kernel: [4294670.662000] Security Framework v1.0.0 initialized
Mar 21 08:35:02 localhost kernel: [4294670.662000] SELinux:  Disabled at boot.
Mar 21 08:35:02 localhost kernel: [4294670.662000] Mount-cache hash table entries: 512
Mar 21 08:35:02 localhost kernel: [4294670.662000] CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
Mar 21 08:35:02 localhost kernel: [4294670.662000] CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
Mar 21 08:35:02 localhost kernel: [4294670.662000] CPU: L1 I cache: 16K, L1 D cache: 16K
Mar 21 08:35:02 localhost kernel: [4294670.662000] CPU: L2 cache: 256K
Mar 21 08:35:02 localhost kernel: [4294670.662000] CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
Mar 21 08:35:02 localhost kernel: [4294670.662000] CPU: Intel Pentium III (Coppermine) stepping 03
Mar 21 08:35:02 localhost kernel: [4294670.662000] Enabling fast FPU save and restore... done.
Mar 21 08:35:02 localhost kernel: [4294670.662000] Enabling unmasked SIMD FPU exception support... done.
Mar 21 08:35:02 localhost kernel: [4294670.662000] Checking 'hlt' instruction... OK.
Mar 21 08:35:02 localhost kernel: [4294670.666000] Checking for popad bug... OK.
Mar 21 08:35:02 localhost kernel: [4294670.666000] checking if image is initramfs... it is
Mar 21 08:35:02 localhost kernel: [4294671.812000] Freeing initrd memory: 5172k freed
Mar 21 08:35:02 localhost kernel: [4294671.814000] ACPI: Looking for DSDT in initrd... not found!
Mar 21 08:35:02 localhost kernel: [4294671.991000]  not found!
Mar 21 08:35:02 localhost kernel: [4294671.997000] ACPI: setting ELCR to 0200 (from 0e00)
Mar 21 08:35:02 localhost kernel: [4294671.998000] NET: Registered protocol family 16
Mar 21 08:35:02 localhost kernel: [4294671.998000] EISA bus registered
Mar 21 08:35:02 localhost kernel: [4294671.998000] ACPI: bus type pci registered
Mar 21 08:35:02 localhost kernel: [4294671.999000] PCI: PCI BIOS revision 2.10 entry at 0xf0720, last bus=1
Mar 21 08:35:02 localhost kernel: [4294671.999000] PCI: Using configuration type 1
Mar 21 08:35:02 localhost kernel: [4294671.999000] mtrr: v2.0 (20020519)
Mar 21 08:35:02 localhost kernel: [4294672.000000] ACPI: Subsystem revision 20050729
Mar 21 08:35:02 localhost kernel: [4294672.008000] ACPI: Interpreter enabled
Mar 21 08:35:02 localhost kernel: [4294672.008000] ACPI: Using PIC for interrupt routing
Mar 21 08:35:02 localhost kernel: [4294672.010000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
Mar 21 08:35:02 localhost kernel: [4294672.010000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
Mar 21 08:35:02 localhost kernel: [4294672.011000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Mar 21 08:35:02 localhost kernel: [4294672.011000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
Mar 21 08:35:02 localhost kernel: [4294672.012000] ACPI: PCI Root Bridge [PCI0] (0000:00)
Mar 21 08:35:02 localhost kernel: [4294672.012000] PCI: Probing PCI hardware (bus 00)
Mar 21 08:35:02 localhost kernel: [4294672.012000] ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
Mar 21 08:35:02 localhost kernel: [4294672.012000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
Mar 21 08:35:02 localhost kernel: [4294672.017000] Boot video device is 0000:01:00.0
Mar 21 08:35:02 localhost kernel: [4294672.018000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Mar 21 08:35:02 localhost kernel: [4294672.027000] Linux Plug and Play Support v0.97 (c) Adam Belay
Mar 21 08:35:02 localhost kernel: [4294672.027000] pnp: PnP ACPI init
Mar 21 08:35:02 localhost kernel: [4294672.036000] pnp: PnP ACPI: found 12 devices
Mar 21 08:35:02 localhost kernel: [4294672.036000] PnPBIOS: Disabled by ACPI PNP
Mar 21 08:35:02 localhost kernel: [4294672.036000] PCI: Using ACPI for IRQ routing
Mar 21 08:35:02 localhost kernel: [4294672.036000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Mar 21 08:35:02 localhost kernel: [4294672.053000] pnp: 00:01: ioport range 0xe400-0xe43f could not be reserved
Mar 21 08:35:02 localhost kernel: [4294672.053000] pnp: 00:01: ioport range 0xe800-0xe80f has been reserved
Mar 21 08:35:02 localhost kernel: [4294672.053000] Simple Boot Flag at 0x46 set to 0x1
Mar 21 08:35:02 localhost kernel: [4294672.054000] audit: initializing netlink socket (disabled)
Mar 21 08:35:02 localhost kernel: [4294672.054000] audit: initialized
Mar 21 08:35:02 localhost kernel: [4294672.054000] VFS: Disk quotas dquot_6.5.1
Mar 21 08:35:02 localhost kernel: [4294672.054000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Mar 21 08:35:02 localhost kernel: [4294672.054000] devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
Mar 21 08:35:02 localhost kernel: [4294672.054000] devfs: boot_options: 0x0
Mar 21 08:35:02 localhost kernel: [4294672.055000] Initializing Cryptographic API
Mar 21 08:35:02 localhost kernel: [4294672.055000] Limiting direct PCI/PCI transfers.
Mar 21 08:35:02 localhost kernel: [4294672.055000] isapnp: Scanning for PnP cards...
Mar 21 08:35:02 localhost kernel: [4294672.176000] pnp: SB audio device quirk - increasing port range
Mar 21 08:35:02 localhost kernel: [4294672.176000] pnp: AWE32 quirk - adding two ports
Mar 21 08:35:02 localhost kernel: [4294672.176000] isapnp: Card 'Creative SB AWE64 PnP'
Mar 21 08:35:02 localhost kernel: [4294672.176000] isapnp: 1 Plug & Play card detected total
Mar 21 08:35:02 localhost kernel: [4294672.218000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Mar 21 08:35:02 localhost kernel: [4294672.221000] serio: i8042 AUX port at 0x60,0x64 irq 12
Mar 21 08:35:02 localhost kernel: [4294672.221000] serio: i8042 KBD port at 0x60,0x64 irq 1
Mar 21 08:35:02 localhost kernel: [4294672.221000] Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled
Mar 21 08:35:02 localhost kernel: [4294672.221000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Mar 21 08:35:02 localhost kernel: [4294672.221000] ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Mar 21 08:35:02 localhost kernel: [4294672.226000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Mar 21 08:35:02 localhost kernel: [4294672.226000] ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Mar 21 08:35:02 localhost kernel: [4294672.227000] io scheduler noop registered
Mar 21 08:35:02 localhost kernel: [4294672.227000] io scheduler anticipatory registered
Mar 21 08:35:02 localhost kernel: [4294672.227000] io scheduler deadline registered
Mar 21 08:35:02 localhost kernel: [4294672.227000] io scheduler cfq registered
Mar 21 08:35:02 localhost kernel: [4294672.228000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
Mar 21 08:35:02 localhost kernel: [4294672.228000] EISA: Probing bus 0 at eisa.0
Mar 21 08:35:02 localhost kernel: [4294672.228000] EISA: Detected 0 cards.
Mar 21 08:35:02 localhost kernel: [4294672.228000] NET: Registered protocol family 2
Mar 21 08:35:02 localhost kernel: [4294672.237000] IP: routing cache hash table of 2048 buckets, 16Kbytes
Mar 21 08:35:02 localhost kernel: [4294672.237000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
Mar 21 08:35:02 localhost kernel: [4294672.237000] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
Mar 21 08:35:02 localhost kernel: [4294672.238000] TCP: Hash tables configured (established 16384 bind 16384)
Mar 21 08:35:02 localhost kernel: [4294672.238000] NET: Registered protocol family 8
Mar 21 08:35:02 localhost kernel: [4294672.238000] NET: Registered protocol family 20
Mar 21 08:35:02 localhost kernel: [4294672.238000] ACPI wakeup devices:
Mar 21 08:35:02 localhost kernel: [4294672.238000] PCI0 UAR1 UAR2 PS2M USB0
Mar 21 08:35:02 localhost kernel: [4294672.238000] ACPI: (supports S0 S1 S5)
Mar 21 08:35:02 localhost kernel: [4294672.239000] Freeing unused kernel memory: 224k freed
Mar 21 08:35:02 localhost kernel: [4294672.260000] input: AT Translated Set 2 keyboard on isa0060/serio0
Mar 21 08:35:02 localhost kernel: [4294672.281000] vga16fb: initializing
Mar 21 08:35:02 localhost kernel: [4294672.281000] vga16fb: mapped to 0xc00a0000
Mar 21 08:35:02 localhost kernel: [4294672.415000] Console: switching to colour frame buffer device 80x30
Mar 21 08:35:02 localhost kernel: [4294672.415000] fb0: VGA16 VGA frame buffer device
Mar 21 08:35:02 localhost kernel: [4294673.597000] Capability LSM initialized
Mar 21 08:35:02 localhost kernel: [4294673.629000] NET: Registered protocol family 1
Mar 21 08:35:02 localhost kernel: [4294673.662000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Mar 21 08:35:02 localhost kernel: [4294673.662000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Mar 21 08:35:02 localhost kernel: [4294673.662000] ACPI: bus type ide registered
Mar 21 08:35:02 localhost kernel: [4294673.675000] PIIX4: IDE controller at PCI slot 0000:00:04.1
Mar 21 08:35:02 localhost kernel: [4294673.675000] PIIX4: chipset revision 1
Mar 21 08:35:02 localhost kernel: [4294673.675000] PIIX4: not 100%% native mode: will probe irqs later
Mar 21 08:35:02 localhost kernel: [4294673.675000]     ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA
Mar 21 08:35:02 localhost kernel: [4294673.675000]     ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:pio, hdd:DMA
Mar 21 08:35:02 localhost kernel: [4294673.675000] Probing IDE interface ide0...
Mar 21 08:35:02 localhost kernel: [4294673.939000] hda: MAXTOR 6L040J2, ATA DISK drive
Mar 21 08:35:02 localhost kernel: [4294674.194000] hdb: SAMSUNG SV1022D, ATA DISK drive
Mar 21 08:35:02 localhost kernel: [4294674.245000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Mar 21 08:35:02 localhost kernel: [4294674.245000] Probing IDE interface ide1...
Mar 21 08:35:02 localhost kernel: [4294675.172000] hdd: HL-DT-ST GCE-8320B, ATAPI CD/DVD-ROM drive
Mar 21 08:35:02 localhost kernel: [4294675.223000] ide1 at 0x170-0x177,0x376 on irq 15
Mar 21 08:35:02 localhost kernel: [4294675.223000] Probing IDE interface ide2...
Mar 21 08:35:02 localhost kernel: [4294675.736000] Probing IDE interface ide3...
Mar 21 08:35:02 localhost kernel: [4294676.249000] Probing IDE interface ide4...
Mar 21 08:35:02 localhost kernel: [4294676.762000] Probing IDE interface ide5...
Mar 21 08:35:02 localhost kernel: [4294677.285000] hda: max request size: 128KiB
Mar 21 08:35:02 localhost kernel: [4294677.286000] hda: 78177792 sectors (40027 MB) w/1819KiB Cache, CHS=65535/16/63, UDMA(33)
Mar 21 08:35:02 localhost kernel: [4294677.286000] hda: cache flushes supported
Mar 21 08:35:02 localhost kernel: [4294677.287000]  /dev/ide/host0/bus0/target0/lun0: p1
Mar 21 08:35:02 localhost kernel: [4294677.290000] hdb: max request s

xThustoonx

#20
22 de Março de 2006, 15:06
Mar 21 04:35:16 localhost kernel: [4294675.264000] hdd: HL-DT-ST GCE-8320B, ATAPI CD/DVD-ROM drive
Mar 21 04:35:16 localhost kernel: [4294675.315000] ide1 at 0x170-0x177,0x376 on irq 15
Mar 21 04:35:16 localhost kernel: [4294675.315000] Probing IDE interface ide2...
Mar 21 04:35:16 localhost kernel: [4294675.828000] Probing IDE interface ide3...
Mar 21 04:35:16 localhost kernel: [4294676.341000] Probing IDE interface ide4...
Mar 21 04:35:16 localhost kernel: [4294676.854000] Probing IDE interface ide5...
Mar 21 04:35:16 localhost kernel: [4294677.377000] hda: max request size: 128KiB
Mar 21 04:35:16 localhost kernel: [4294677.378000] hda: 78177792 sectors (40027 MB) w/1819KiB Cache, CHS=65535/16/63, UDMA(33)
Mar 21 04:35:16 localhost kernel: [4294677.378000] hda: cache flushes supported
Mar 21 04:35:16 localhost kernel: [4294677.379000]  /dev/ide/host0/bus0/target0/lun0: p1
Mar 21 04:35:16 localhost kernel: [4294677.383000] hdb: max request size: 128KiB
Mar 21 04:35:16 localhost kernel: [4294677.389000] hdb: Host Protected Area detected.
Mar 21 04:35:16 localhost kernel: [4294677.389000] ^Icurrent capacity is 19931181 sectors (10204 MB)
Mar 21 04:35:16 localhost kernel: [4294677.389000] ^Inative  capacity is 19931185 sectors (10204 MB)
Mar 21 04:35:16 localhost kernel: [4294677.390000] hdb: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
Mar 21 04:35:16 localhost kernel: [4294677.390000] hdb: task_no_data_intr: error=0x04 { DriveStatusError }
Mar 21 04:35:16 localhost kernel: [4294677.390000] ide: failed opcode was: 0xf9
Mar 21 04:35:16 localhost kernel: [4294677.390000] hdb: 19931181 sectors (10204 MB) w/480KiB Cache, CHS=19772/16/63, UDMA(33)
Mar 21 04:35:16 localhost kernel: [4294677.390000] hdb: cache flushes not supported
Mar 21 04:35:16 localhost kernel: [4294677.390000]  /dev/ide/host0/bus0/target1/lun0:<4>hdb: dma_timer_expiry: dma status == 0x61
Mar 21 04:35:16 localhost kernel: [4294707.390000] hdb: DMA timeout error
Mar 21 04:35:16 localhost kernel: [4294707.390000] hdb: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
Mar 21 04:35:16 localhost kernel: [4294707.390000]
Mar 21 04:35:16 localhost kernel: [4294707.390000] ide: failed opcode was: unknown
Mar 21 04:35:16 localhost kernel: [4294707.495000]  p1 p2 <<4>hdb: dma_timer_expiry: dma status == 0x61
Mar 21 04:35:16 localhost kernel: [4294737.495000] hdb: DMA timeout error
Mar 21 04:35:16 localhost kernel: [4294737.495000] hdb: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
Mar 21 04:35:16 localhost kernel: [4294737.495000]
Mar 21 04:35:16 localhost kernel: [4294737.495000] ide: failed opcode was: unknown
Mar 21 04:35:16 localhost kernel: [4294737.600000]  p5 >
Mar 21 04:35:16 localhost kernel: [4294737.615000] hdd: ATAPI 40X CD-ROM CD-R/RW drive, 8192kB Cache
Mar 21 04:35:16 localhost kernel: [4294737.615000] Uniform CD-ROM driver Revision: 3.20
Mar 21 04:35:16 localhost kernel: [4294738.401000] usbcore: registered new driver usbfs
Mar 21 04:35:16 localhost kernel: [4294738.401000] usbcore: registered new driver hub
Mar 21 04:35:16 localhost kernel: [4294738.405000] USB Universal Host Controller Interface driver v2.2
Mar 21 04:35:16 localhost kernel: [4294738.406000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
Mar 21 04:35:16 localhost kernel: [4294738.406000] PCI: setting IRQ 9 as level-triggered
Mar 21 04:35:16 localhost kernel: [4294738.406000] ACPI: PCI Interrupt 0000:00:04.2[D] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9
Mar 21 04:35:16 localhost kernel: [4294738.406000] uhci_hcd 0000:00:04.2: Intel Corporation 82371AB/EB/MB PIIX4 USB
Mar 21 04:35:16 localhost kernel: [4294738.468000] uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1
Mar 21 04:35:16 localhost kernel: [4294738.468000] uhci_hcd 0000:00:04.2: irq 9, io base 0x0000d400
Mar 21 04:35:16 localhost kernel: [4294738.468000] hub 1-0:1.0: USB hub found
Mar 21 04:35:16 localhost kernel: [4294738.468000] hub 1-0:1.0: 2 ports detected
Mar 21 04:35:16 localhost kernel: [4294738.516000] fealnx.c:v2.51 Nov-17-2001
Mar 21 04:35:16 localhost kernel: [4294738.517000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
Mar 21 04:35:16 localhost kernel: [4294738.517000] PCI: setting IRQ 10 as level-triggered
Mar 21 04:35:16 localhost kernel: [4294738.517000] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
Mar 21 04:35:16 localhost kernel: [4294738.517000] eth0: 100/10M Ethernet PCI Adapter at 0001d000, 00:02:44:59:35:6a, IRQ 10.
Mar 21 04:35:16 localhost kernel: [4294741.279000] ACPI: CPU0 (power states: C1[C1] C2[C2])
Mar 21 04:35:16 localhost kernel: [4294761.355000] hdb: dma_timer_expiry: dma status == 0x61
Mar 21 04:35:16 localhost kernel: [4294771.355000] hdb: DMA timeout error
Mar 21 04:35:16 localhost kernel: [4294771.355000] hdb: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
Mar 21 04:35:16 localhost kernel: [4294771.355000]
Mar 21 04:35:16 localhost kernel: [4294771.355000] ide: failed opcode was: unknown
Mar 21 04:35:16 localhost kernel: [4294791.468000] hdb: dma_timer_expiry: dma status == 0x61
Mar 21 04:35:16 localhost kernel: [4294801.468000] hdb: DMA timeout error
Mar 21 04:35:16 localhost kernel: [4294801.468000] hdb: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
Mar 21 04:35:16 localhost kernel: [4294801.468000]
Mar 21 04:35:16 localhost kernel: [4294801.468000] ide: failed opcode was: unknown
Mar 21 04:35:16 localhost kernel: [4294801.585000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
Mar 21 04:35:16 localhost kernel: [4294801.705000] cdrom: open failed.
Mar 21 04:35:16 localhost kernel: [4294801.969000] Attempting manual resume
Mar 21 04:35:16 localhost kernel: [4294802.008000] swsusp: Suspend partition has wrong signature?
Mar 21 04:35:16 localhost kernel: [4294802.076000] kjournald starting.  Commit interval 5 seconds
Mar 21 04:35:16 localhost kernel: [4294802.076000] EXT3-fs: mounted filesystem with ordered data mode.
Mar 21 04:35:16 localhost kernel: [4294805.722000] md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
Mar 21 04:35:16 localhost kernel: [4294812.551000] Adding 430072k swap on /dev/mapper/Ubuntu-swap_1.  Priority:-1 extents:1
Mar 21 04:35:16 localhost kernel: [4294812.951000] EXT3 FS on dm-0, internal journal
Mar 21 04:35:16 localhost kernel: [4294837.246000] parport: PnPBIOS parport detected.
Mar 21 04:35:16 localhost kernel: [4294837.246000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
Mar 21 04:35:16 localhost kernel: [4294837.335000] lp0: using parport0 (interrupt-driven).
Mar 21 04:35:16 localhost kernel: [4294837.417000] mice: PS/2 mouse device common for all mice
Mar 21 04:35:16 localhost kernel: [4294837.682000] logips2pp: Detected unknown logitech mouse model 0
Mar 21 04:35:16 localhost kernel: [4294837.730000] input: ImExPS/2 Logitech Explorer Mouse on isa0060/serio1
Mar 21 04:35:16 localhost kernel: [4294838.435000] ts: Compaq touchscreen protocol output
Mar 21 04:35:16 localhost kernel: [4294844.038000] cdrom: open failed.
Mar 21 04:35:16 localhost kernel: [4294846.137000] kjournald starting.  Commit interval 5 seconds
Mar 21 04:35:16 localhost kernel: [4294846.146000] EXT3 FS on hdb1, internal journal
Mar 21 04:35:16 localhost kernel: [4294846.146000] EXT3-fs: mounted filesystem with ordered data mode.
Mar 21 04:35:16 localhost kernel: [4294850.175000] Linux agpgart interface v0.101 (c) Dave Jones
Mar 21 04:35:16 localhost kernel: [4294850.203000] agpgart: Detected an Intel 440BX Chipset.
Mar 21 04:35:16 localhost kernel: [4294850.261000] agpgart: AGP aperture is 64M @ 0xe4000000
Mar 21 04:35:16 localhost kernel: [4294850.933000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Mar 21 04:35:16 localhost kernel: [4294850.949000] shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
Mar 21 04:35:16 localhost kernel: [4294850.949000] shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
Mar 21 04:35:16 localhost kernel: [4294852.264000] piix4_smbus 0000:00:04.3: Found 0000:00:04.3 device
Mar 21 04:35:16 localhost kernel: [4294855.827000] Real Time Clock Driver v1.12
Mar 21 04:35:16 localhost kernel: [4294856.246000] input: PC Speaker
Mar 21 04:35:16 localhost kernel: [4294856.644000] Floppy drive(s): fd0 is 1.44M
Mar 21 04:35:16 localhost kernel: [4294856.659000] FDC 0 is a post-1991 82077
Mar 21 04:35:16 localhost kernel: [4294857.668000] pnp: Device 01:01.01 activated.
Mar 21 04:35:16 localhost kernel: [4294857.685000] gameport: NS558 PnP Gameport is pnp01:01.01/gameport0, io 0x200, speed 736kHz
Mar 21 04:35:16 localhost kernel: [4294863.671000] ACPI: Power Button (FF) [PWRF]
Mar 21 04:35:16 localhost kernel: [4294863.671000] ACPI: Power Button (CM) [PWRB]
Mar 21 04:35:16 localhost kernel: [4294863.965000] ibm_acpi: ec object not found
Mar 21 04:35:23 localhost hp: unable to open /var/run/hplip/hpiod.port: No such file or directory: prnt/hpijs/hplip_api.c 75
Mar 21 04:35:24 localhost hpiod: 0.9.5 accepting connections at 32770...
Mar 21 04:35:36 localhost python: hpssd [ERROR] Unable to connect to hpiod.
Mar 21 04:35:37 localhost kernel: [4294886.844000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
Mar 21 04:35:37 localhost kernel: [4294886.844000] apm: overridden by ACPI.
Mar 21 04:35:38 localhost hcid[6469]: Bluetooth HCI daemon
Mar 21 04:35:38 localhost kernel: [4294888.532000] Bluetooth: Core ver 2.7
Mar 21 04:35:38 localhost kernel: [4294888.532000] NET: Registered protocol family 31
Mar 21 04:35:38 localhost kernel: [4294888.532000] Bluetooth: HCI device and connection manager initialized
Mar 21 04:35:38 localhost kernel: [4294888.532000] Bluetooth: HCI socket layer initialized
Mar 21 04:35:38 localhost kernel: [4294888.620000] Bluetooth: L2CAP ver 2.7
Mar 21 04:35:38 localhost kernel: [4294888.620000] Bluetooth: L2CAP socket layer initialized
Mar 21 04:35:38 localhost sdpd[6475]: Bluetooth SDP daemon
Mar 21 04:35:38 localhost kernel: [4294888.674000] Bluetooth: RFCOMM ver 1.5
Mar 21 04:35:38 localhost kernel: [4294888.674000] Bluetooth: RFCOMM socket layer initialized
Mar 21 04:35:38 localhost kernel: [4294888.674000] Bluetooth: RFCOMM TTY layer initialized
Mar 21 04:35:39 localhost anacron[6504]: Anacron 2.3 started on 2006-03-21
Mar 21 04:35:39 localhost anacron[6504]: Normal exit (0 jobs run)

xThustoonx

#21
22 de Março de 2006, 15:07
Mar 21 04:35:39 localhost /usr/sbin/cron[6529]: (CRON) INFO (pidfile fd = 3)
Mar 21 04:35:39 localhost /usr/sbin/cron[6530]: (CRON) STARTUP (fork ok)
Mar 21 04:35:39 localhost /usr/sbin/cron[6530]: (CRON) INFO (Running @reboot jobs)
Mar 21 04:35:47 localhost gconfd (thustoon-6663): iniciando (versão 2.12.0), pid 6663 usuário 'thustoon'
Mar 21 04:35:47 localhost gconfd (thustoon-6663): Endereço "xml:readonly:/etc/gconf/gconf.xml.mandatory" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 0
Mar 21 04:35:47 localhost gconfd (thustoon-6663): Endereço "xml:readonly:/usr/share/gconf/local.mandatory" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 1
Mar 21 04:35:47 localhost gconfd (thustoon-6663): O endereço "xml:readwrite:/home/thustoon/.gconf" resolvido para uma fonte de configuração com permissões de escrita na posição 2
Mar 21 04:35:47 localhost gconfd (thustoon-6663): Endereço "xml:readonly:/etc/gconf/gconf.xml.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 3
Mar 21 04:35:47 localhost gconfd (thustoon-6663): Endereço "xml:readonly:/usr/share/gconf/local.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 4
Mar 21 04:35:47 localhost gconfd (thustoon-6663): Endereço "xml:readonly:/usr/share/gconf/cdd.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 5
Mar 21 04:35:47 localhost gconfd (thustoon-6663): Endereço "xml:readonly:/usr/share/gconf/debian.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 6
Mar 21 04:35:47 localhost gconfd (thustoon-6663): Endereço "xml:readonly:/var/lib/gconf/defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 7
Mar 21 04:35:48 localhost kernel: [4294898.374000] NET: Registered protocol family 10
Mar 21 04:35:48 localhost kernel: [4294898.374000] Disabled Privacy Extensions on device c02eb280(lo)
Mar 21 04:35:48 localhost kernel: [4294898.374000] IPv6 over IPv4 tunneling driver
Mar 21 04:36:12 localhost gconfd (thustoon-6663): O endereço "xml:readwrite:/home/thustoon/.gconf" resolvido para uma fonte de configuração com permissões de escrita na posição 0
Mar 21 04:36:56 localhost kernel: [4294965.900000] CSLIP: code copyright 1989 Regents of the University of California
Mar 21 04:36:56 localhost kernel: [4294965.917000] PPP generic driver version 2.4.2
Mar 21 04:36:56 localhost kernel: [4294965.969000] NET: Registered protocol family 24
Mar 21 04:36:58 localhost kernel: [4294967.763000] NET: Registered protocol family 17
Mar 21 04:37:08 localhost kernel: [4294978.433000] eth0: no IPv6 routers present
Mar 21 04:37:13 localhost pppd[7420]: Plugin rp-pppoe.so loaded.
Mar 21 04:37:13 localhost pppd[7422]: pppd 2.4.3 started by root, uid 0
Mar 21 04:37:13 localhost pppd[7422]: PPP session is 5895
Mar 21 04:37:13 localhost pppd[7422]: Using interface ppp0
Mar 21 04:37:13 localhost pppd[7422]: Connect: ppp0 <--> eth0
Mar 21 04:37:13 localhost pppd[7422]: Couldn't increase MTU to 1500
Mar 21 04:37:13 localhost pppd[7422]: Couldn't increase MRU to 1500
Mar 21 04:37:16 localhost pppd[7422]: Couldn't increase MRU to 1500
Mar 21 04:37:18 localhost kernel: [4294987.867000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
Mar 21 04:37:18 localhost kernel: [4294987.867000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
Mar 21 04:37:18 localhost kernel: [4294988.006000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
Mar 21 04:37:18 localhost kernel: [4294988.006000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
Mar 21 04:37:18 localhost pppd[7422]: PAP authentication succeeded
Mar 21 04:37:18 localhost pppd[7422]: peer from calling number 00:90:1A:41:75:AB authorized
Mar 21 04:37:18 localhost pppd[7422]: Cannot determine ethernet address for proxy ARP
Mar 21 04:37:18 localhost pppd[7422]: local  IP address 200.233.246.160
Mar 21 04:37:18 localhost pppd[7422]: remote IP address 200.225.196.87
Mar 21 04:37:18 localhost pppd[7422]: primary   DNS address 200.225.197.34
Mar 21 04:37:18 localhost pppd[7422]: secondary DNS address 200.225.197.37
Mar 21 04:37:18 localhost kernel: [4294988.397000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
Mar 21 04:37:18 localhost kernel: [4294988.397000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
Mar 21 04:37:18 localhost kernel: [4294988.451000] ip_tables: (C) 2000-2002 Netfilter core team
Mar 21 04:37:18 localhost kernel: [4294988.603000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
Mar 21 04:37:18 localhost kernel: [4294988.603000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
Mar 21 04:37:19 localhost kernel: [4294988.893000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
Mar 21 04:37:19 localhost kernel: [4294988.893000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
Mar 21 04:37:19 localhost kernel: [4294989.042000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
Mar 21 04:37:19 localhost kernel: [4294989.042000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
Mar 21 04:37:20 localhost kernel: [4294990.520000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
Mar 21 04:37:20 localhost kernel: [4294990.520000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
Mar 21 04:37:20 localhost kernel: [4294990.669000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
Mar 21 04:37:20 localhost kernel: [4294990.669000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
Mar 21 04:38:42 localhost kernel: [4295072.070000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
Mar 21 04:38:42 localhost kernel: [4295072.070000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
Mar 21 04:38:42 localhost kernel: [4295072.188000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
Mar 21 04:38:42 localhost kernel: [4295072.188000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
Mar 21 04:38:42 localhost kernel: [4295072.553000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
Mar 21 04:38:42 localhost kernel: [4295072.553000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
Mar 21 04:38:43 localhost kernel: [4295072.831000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
Mar 21 04:38:43 localhost kernel: [4295072.831000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
Mar 21 04:38:43 localhost kernel: [4295072.894000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
Mar 21 04:38:43 localhost kernel: [4295072.894000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
Mar 21 04:38:43 localhost kernel: [4295073.036000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
Mar 21 04:38:43 localhost kernel: [4295073.036000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
Mar 21 04:39:21 localhost gconfd (thustoon-6663): Recebido sinal 15, desligando corretamente
Mar 21 04:39:21 localhost gconfd (thustoon-6663): Terminando
Mar 21 04:39:21 localhost gdm[6172]: gdm_slave_xioerror_handler: Erro fatal no X - Reinicializando :0
Mar 21 04:39:31 localhost gdm[6171]: Desligamento mestre...
Mar 21 04:39:31 localhost shutdown[6171]: shutting down for system halt
Mar 21 04:39:32 localhost init: Switching to runlevel: 0
Mar 21 04:39:36 localhost kernel: [4295126.016000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
Mar 21 04:39:36 localhost kernel: [4295126.016000] apm: disabled on user request.
Mar 21 04:39:38 localhost sdpd[6475]: terminating...  
Mar 21 04:39:38 localhost kernel: Kernel logging (proc) stopped.
Mar 21 04:39:38 localhost kernel: Kernel log daemon terminating.
Mar 21 04:39:38 localhost exiting on signal 15
Mar 21 08:35:01 localhost syslogd 1.4.1#17ubuntu3: restart.
Mar 21 08:35:01 localhost kernel: Inspecting /boot/System.map-2.6.12-10-386
Mar 21 08:35:02 localhost kernel: Loaded 29010 symbols from /boot/System.map-2.6.12-10-386.
Mar 21 08:35:02 localhost kernel: Symbols match kernel version 2.6.12.
Mar 21 08:35:02 localhost kernel: No module symbols loaded - kernel modules not enabled.
Mar 21 08:35:02 localhost kernel: [4294667.296000] Linux version 2.6.12-10-386 (buildd@terranova) (gcc version 3.4.5 20050809 (prerelease) (Ubuntu 3.4.4-6ubuntu8.1)) #1 Sat Mar 11 16:13:17 UTC 2006
Mar 21 08:35:02 localhost kernel: [4294667.296000] BIOS-provided physical RAM map:
Mar 21 08:35:02 localhost kernel: [4294667.296000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Mar 21 08:35:02 localhost kernel: [4294667.296000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Mar 21 08:35:02 localhost kernel: [4294667.296000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Mar 21 08:35:02 localhost kernel: [4294667.296000]  BIOS-e820: 0000000000100000 - 000000000fffd000 (usable)
Mar 21 08:35:02 localhost kernel: [4294667.296000]  BIOS-e820: 000000000fffd000 - 000000000ffff000 (ACPI data)
Mar 21 08:35:02 localhost kernel: [4294667.296000]  BIOS-e820: 000000000ffff000 - 0000000010000000 (ACPI NVS)
Mar 21 08:35:02 localhost kernel: [4294667.296000]  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Mar 21 08:35:02 localhost kernel: [4294667.296000] 0MB HIGHMEM available.
Mar 21 08:35:02 localhost kernel: [4294667.296000] 255MB LOWMEM available.
Mar 21 08:35:02 localhost kernel: [4294667.296000] On node 0 totalpages: 65533
Mar 21 08:35:02 localhost kernel: [4294667.296000]   DMA zone: 4096 pages, LIFO batch:1
Mar 21 08:35:02 localhost kernel: [4294667.296000]   Normal zone: 61437 pages, LIFO batch:31
Mar 21 08:35:02 localhost kernel: [4294667.296000]   HighMem zone: 0 pages, LIFO batch:1
Mar 21 08:35:02 localhost kernel: [4294667.296000] DMI 2.0 present.
Mar 21 08:35:02 localhost kernel: [4294667.296000] ACPI: RSDP (v000 ASUS                                  ) @ 0x000f7980
Mar 21 08:35:02 localhost kernel: [4294667.296000] ACPI: RSDT (v001 ASUS   P2-99    0x58582e31 ASUS 0x31303030) @ 0x0fffd000
Mar 21 08:35:02 localhost kernel: [4294667.296000] ACPI: FADT (v001 ASUS   P2-99    0x58582e31 ASUS 0x31303030) @ 0x0fffd080
Mar 21 08:35:02 localhost kernel: [4294667.296000] ACPI: BOOT (v001 ASUS   P2-99    0x58582e31 ASUS 0x31303030) @ 0x0fffd040
Mar 21 08:35:02 localhost kernel: [4294667.296000] ACPI: DSDT (v001   ASUS P2-99    0x00001000 MSFT 0x01000001) @ 0x00000000
Mar 21 08:35:02 localhost kernel: [4294667.296000] ACPI: PM-Timer IO Port: 0xe408
Mar 21 08:35:02 localhost kernel: [4294667.296000] Allocating PCI resources starting at 10000000 (gap: 10000000:efff0000)
Mar 21 08:35:02 localhost kernel: [4294667.296000] Built 1 zonelists
Mar 21 08:35:02 localhost kernel: [4294667.296000] Kernel command line: root=/dev/mapper/Ubuntu-root ro quiet splash
Mar 21 08:35:02 localhost kernel: [4294667.296000] Local APIC disabled by BIOS -- you can enable it with "lapic"
Mar 21 08:35:02 localhost kernel: [4294667.296000] mapped APIC to ffffd000 (01201000)
Mar 21 08:35:02 localhost kernel: [4294667.296000] Initializing CPU#0
Mar 21 08:35:02 localhost kernel: [4294667.296000] PID hash table entries: 1024 (order: 10, 16384 bytes)
Mar 21 08:35:02 localhost kernel: [4294667.296000] Detected 701.792 MHz processor.
Mar 21 08:35:02 localhost kernel: [4294667.296000] Using pmtmr for high-res timesource
Mar 21 08:35:02 localhost kernel: [4294667.296000] Console: colour VGA+ 80x25
Mar 21 08:35:02 localhost kernel: [4294670.607000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Mar 21 08:35:02 localhost kernel: [4294670.609000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Mar 21 08:35:02 localhost kernel: [4294670.640000] Memory: 251140k/262132k available (1416k kernel code, 10296k reserved, 762k data, 224k init, 0k highmem)
Mar 21 08:35:02 localhost kernel: [4294670.640000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
Mar 21 08:35:02 localhost kernel: [4294670.640000] Calibrating delay loop... 1392.64 BogoMIPS (lpj=696320)
Mar 21 08:35:02 localhost kernel: [4294670.662000] Security Framework v1.0.0 initialized
Mar 21 08:35:02 localhost kernel: [4294670.662000] SELinux:  Disabled at boot.
Mar 21 08:35:02 localhost kernel: [4294670.662000] Mount-cache hash table entries: 512
Mar 21 08:35:02 localhost kernel: [4294670.662000] CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
Mar 21 08:35:02 localhost kernel: [4294670.662000] CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
Mar 21 08:35:02 localhost kernel: [4294670.662000] CPU: L1 I cache: 16K, L1 D cache: 16K
Mar 21 08:35:02 localhost kernel: [4294670.662000] CPU: L2 cache: 256K
Mar 21 08:35:02 localhost kernel: [4294670.662000] CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000

xThustoonx

#22
22 de Março de 2006, 15:09
Mar 21 08:35:02 localhost kernel: [4294670.662000] CPU: Intel Pentium III (Coppermine) stepping 03
Mar 21 08:35:02 localhost kernel: [4294670.662000] Enabling fast FPU save and restore... done.
Mar 21 08:35:02 localhost kernel: [4294670.662000] Enabling unmasked SIMD FPU exception support... done.
Mar 21 08:35:02 localhost kernel: [4294670.662000] Checking 'hlt' instruction... OK.
Mar 21 08:35:02 localhost kernel: [4294670.666000] Checking for popad bug... OK.
Mar 21 08:35:02 localhost kernel: [4294670.666000] checking if image is initramfs... it is
Mar 21 08:35:02 localhost kernel: [4294671.812000] Freeing initrd memory: 5172k freed
Mar 21 08:35:02 localhost kernel: [4294671.814000] ACPI: Looking for DSDT in initrd... not found!
Mar 21 08:35:02 localhost kernel: [4294671.991000]  not found!
Mar 21 08:35:02 localhost kernel: [4294671.997000] ACPI: setting ELCR to 0200 (from 0e00)
Mar 21 08:35:02 localhost kernel: [4294671.998000] NET: Registered protocol family 16
Mar 21 08:35:02 localhost kernel: [4294671.998000] EISA bus registered
Mar 21 08:35:02 localhost kernel: [4294671.998000] ACPI: bus type pci registered
Mar 21 08:35:02 localhost kernel: [4294671.999000] PCI: PCI BIOS revision 2.10 entry at 0xf0720, last bus=1
Mar 21 08:35:02 localhost kernel: [4294671.999000] PCI: Using configuration type 1
Mar 21 08:35:02 localhost kernel: [4294671.999000] mtrr: v2.0 (20020519)
Mar 21 08:35:02 localhost kernel: [4294672.000000] ACPI: Subsystem revision 20050729
Mar 21 08:35:02 localhost kernel: [4294672.008000] ACPI: Interpreter enabled
Mar 21 08:35:02 localhost kernel: [4294672.008000] ACPI: Using PIC for interrupt routing
Mar 21 08:35:02 localhost kernel: [4294672.010000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
Mar 21 08:35:02 localhost kernel: [4294672.010000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
Mar 21 08:35:02 localhost kernel: [4294672.011000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Mar 21 08:35:02 localhost kernel: [4294672.011000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
Mar 21 08:35:02 localhost kernel: [4294672.012000] ACPI: PCI Root Bridge [PCI0] (0000:00)
Mar 21 08:35:02 localhost kernel: [4294672.012000] PCI: Probing PCI hardware (bus 00)
Mar 21 08:35:02 localhost kernel: [4294672.012000] ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
Mar 21 08:35:02 localhost kernel: [4294672.012000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
Mar 21 08:35:02 localhost kernel: [4294672.017000] Boot video device is 0000:01:00.0
Mar 21 08:35:02 localhost kernel: [4294672.018000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Mar 21 08:35:02 localhost kernel: [4294672.027000] Linux Plug and Play Support v0.97 (c) Adam Belay
Mar 21 08:35:02 localhost kernel: [4294672.027000] pnp: PnP ACPI init
Mar 21 08:35:02 localhost kernel: [4294672.036000] pnp: PnP ACPI: found 12 devices
Mar 21 08:35:02 localhost kernel: [4294672.036000] PnPBIOS: Disabled by ACPI PNP
Mar 21 08:35:02 localhost kernel: [4294672.036000] PCI: Using ACPI for IRQ routing
Mar 21 08:35:02 localhost kernel: [4294672.036000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Mar 21 08:35:02 localhost kernel: [4294672.053000] pnp: 00:01: ioport range 0xe400-0xe43f could not be reserved
Mar 21 08:35:02 localhost kernel: [4294672.053000] pnp: 00:01: ioport range 0xe800-0xe80f has been reserved
Mar 21 08:35:02 localhost kernel: [4294672.053000] Simple Boot Flag at 0x46 set to 0x1
Mar 21 08:35:02 localhost kernel: [4294672.054000] audit: initializing netlink socket (disabled)
Mar 21 08:35:02 localhost kernel: [4294672.054000] audit: initialized
Mar 21 08:35:02 localhost kernel: [4294672.054000] VFS: Disk quotas dquot_6.5.1
Mar 21 08:35:02 localhost kernel: [4294672.054000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Mar 21 08:35:02 localhost kernel: [4294672.054000] devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
Mar 21 08:35:02 localhost kernel: [4294672.054000] devfs: boot_options: 0x0
Mar 21 08:35:02 localhost kernel: [4294672.055000] Initializing Cryptographic API
Mar 21 08:35:02 localhost kernel: [4294672.055000] Limiting direct PCI/PCI transfers.
Mar 21 08:35:02 localhost kernel: [4294672.055000] isapnp: Scanning for PnP cards...
Mar 21 08:35:02 localhost kernel: [4294672.176000] pnp: SB audio device quirk - increasing port range
Mar 21 08:35:02 localhost kernel: [4294672.176000] pnp: AWE32 quirk - adding two ports
Mar 21 08:35:02 localhost kernel: [4294672.176000] isapnp: Card 'Creative SB AWE64 PnP'
Mar 21 08:35:02 localhost kernel: [4294672.176000] isapnp: 1 Plug & Play card detected total
Mar 21 08:35:02 localhost kernel: [4294672.218000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Mar 21 08:35:02 localhost kernel: [4294672.221000] serio: i8042 AUX port at 0x60,0x64 irq 12
Mar 21 08:35:02 localhost kernel: [4294672.221000] serio: i8042 KBD port at 0x60,0x64 irq 1
Mar 21 08:35:02 localhost kernel: [4294672.221000] Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled
Mar 21 08:35:02 localhost kernel: [4294672.221000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Mar 21 08:35:02 localhost kernel: [4294672.221000] ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Mar 21 08:35:02 localhost kernel: [4294672.226000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Mar 21 08:35:02 localhost kernel: [4294672.226000] ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Mar 21 08:35:02 localhost kernel: [4294672.227000] io scheduler noop registered
Mar 21 08:35:02 localhost kernel: [4294672.227000] io scheduler anticipatory registered
Mar 21 08:35:02 localhost kernel: [4294672.227000] io scheduler deadline registered
Mar 21 08:35:02 localhost kernel: [4294672.227000] io scheduler cfq registered
Mar 21 08:35:02 localhost kernel: [4294672.228000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
Mar 21 08:35:02 localhost kernel: [4294672.228000] EISA: Probing bus 0 at eisa.0
Mar 21 08:35:02 localhost kernel: [4294672.228000] EISA: Detected 0 cards.
Mar 21 08:35:02 localhost kernel: [4294672.228000] NET: Registered protocol family 2
Mar 21 08:35:02 localhost kernel: [4294672.237000] IP: routing cache hash table of 2048 buckets, 16Kbytes
Mar 21 08:35:02 localhost kernel: [4294672.237000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
Mar 21 08:35:02 localhost kernel: [4294672.237000] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
Mar 21 08:35:02 localhost kernel: [4294672.238000] TCP: Hash tables configured (established 16384 bind 16384)
Mar 21 08:35:02 localhost kernel: [4294672.238000] NET: Registered protocol family 8
Mar 21 08:35:02 localhost kernel: [4294672.238000] NET: Registered protocol family 20
Mar 21 08:35:02 localhost kernel: [4294672.238000] ACPI wakeup devices:
Mar 21 08:35:02 localhost kernel: [4294672.238000] PCI0 UAR1 UAR2 PS2M USB0
Mar 21 08:35:02 localhost kernel: [4294672.238000] ACPI: (supports S0 S1 S5)
Mar 21 08:35:02 localhost kernel: [4294672.239000] Freeing unused kernel memory: 224k freed
Mar 21 08:35:02 localhost kernel: [4294672.260000] input: AT Translated Set 2 keyboard on isa0060/serio0
Mar 21 08:35:02 localhost kernel: [4294672.281000] vga16fb: initializing
Mar 21 08:35:02 localhost kernel: [4294672.281000] vga16fb: mapped to 0xc00a0000
Mar 21 08:35:02 localhost kernel: [4294672.415000] Console: switching to colour frame buffer device 80x30
Mar 21 08:35:02 localhost kernel: [4294672.415000] fb0: VGA16 VGA frame buffer device
Mar 21 08:35:02 localhost kernel: [4294673.597000] Capability LSM initialized
Mar 21 08:35:02 localhost kernel: [4294673.629000] NET: Registered protocol family 1
Mar 21 08:35:02 localhost kernel: [4294673.662000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Mar 21 08:35:02 localhost kernel: [4294673.662000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Mar 21 08:35:02 localhost kernel: [4294673.662000] ACPI: bus type ide registered
Mar 21 08:35:02 localhost kernel: [4294673.675000] PIIX4: IDE controller at PCI slot 0000:00:04.1
Mar 21 08:35:02 localhost kernel: [4294673.675000] PIIX4: chipset revision 1
Mar 21 08:35:02 localhost kernel: [4294673.675000] PIIX4: not 100%% native mode: will probe irqs later
Mar 21 08:35:02 localhost kernel: [4294673.675000]     ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA
Mar 21 08:35:02 localhost kernel: [4294673.675000]     ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:pio, hdd:DMA
Mar 21 08:35:02 localhost kernel: [4294673.675000] Probing IDE interface ide0...
Mar 21 08:35:02 localhost kernel: [4294673.939000] hda: MAXTOR 6L040J2, ATA DISK drive
Mar 21 08:35:02 localhost kernel: [4294674.194000] hdb: SAMSUNG SV1022D, ATA DISK drive
Mar 21 08:35:02 localhost kernel: [4294674.245000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Mar 21 08:35:02 localhost kernel: [4294674.245000] Probing IDE interface ide1...
Mar 21 08:35:02 localhost kernel: [4294675.172000] hdd: HL-DT-ST GCE-8320B, ATAPI CD/DVD-ROM drive
Mar 21 08:35:02 localhost kernel: [4294675.223000] ide1 at 0x170-0x177,0x376 on irq 15
Mar 21 08:35:02 localhost kernel: [4294675.223000] Probing IDE interface ide2...
Mar 21 08:35:02 localhost kernel: [4294675.736000] Probing IDE interface ide3...
Mar 21 08:35:02 localhost kernel: [4294676.249000] Probing IDE interface ide4...
Mar 21 08:35:02 localhost kernel: [4294676.762000] Probing IDE interface ide5...
Mar 21 08:35:02 localhost kernel: [4294677.285000] hda: max request size: 128KiB
Mar 21 08:35:02 localhost kernel: [4294677.286000] hda: 78177792 sectors (40027 MB) w/1819KiB Cache, CHS=65535/16/63, UDMA(33)
Mar 21 08:35:02 localhost kernel: [4294677.286000] hda: cache flushes supported
Mar 21 08:35:02 localhost kernel: [4294677.287000]  /dev/ide/host0/bus0/target0/lun0: p1
Mar 21 08:35:02 localhost kernel: [4294677.290000] hdb: max request size: 128KiB
Mar 21 08:35:02 localhost kernel: [4294677.296000] hdb: Host Protected Area detected.
Mar 21 08:35:02 localhost kernel: [4294677.296000] ^Icurrent capacity is 19931181 sectors (10204 MB)
Mar 21 08:35:02 localhost kernel: [4294677.296000] ^Inative  capacity is 19931185 sectors (10204 MB)
Mar 21 08:35:02 localhost kernel: [4294677.296000] hdb: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
Mar 21 08:35:02 localhost kernel: [4294677.296000] hdb: task_no_data_intr: error=0x04 { DriveStatusError }
Mar 21 08:35:02 localhost kernel: [4294677.296000] ide: failed opcode was: 0xf9
Mar 21 08:35:02 localhost kernel: [4294677.296000] hdb: 19931181 sectors (10204 MB) w/480KiB Cache, CHS=19772/16/63, UDMA(33)
Mar 21 08:35:02 localhost kernel: [4294677.296000] hdb: cache flushes not supported
Mar 21 08:35:02 localhost kernel: [4294677.296000]  /dev/ide/host0/bus0/target1/lun0:<4>hdb: dma_timer_expiry: dma status == 0x61
Mar 21 08:35:02 localhost kernel: [4294707.296000] hdb: DMA timeout error
Mar 21 08:35:02 localhost kernel: [4294707.296000] hdb: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
Mar 21 08:35:02 localhost kernel: [4294707.296000]
Mar 21 08:35:02 localhost kernel: [4294707.296000] ide: failed opcode was: unknown
Mar 21 08:35:02 localhost kernel: [4294707.401000]  p1 p2 <<4>hdb: dma_timer_expiry: dma status == 0x61
Mar 21 08:35:02 localhost kernel: [4294737.401000] hdb: DMA timeout error
Mar 21 08:35:02 localhost kernel: [4294737.401000] hdb: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
Mar 21 08:35:02 localhost kernel: [4294737.401000]
Mar 21 08:35:02 localhost kernel: [4294737.401000] ide: failed opcode was: unknown
Mar 21 08:35:02 localhost kernel: [4294737.506000]  p5 >
Mar 21 08:35:02 localhost kernel: [4294737.521000] hdd: ATAPI 40X CD-ROM CD-R/RW drive, 8192kB Cache
Mar 21 08:35:02 localhost kernel: [4294737.521000] Uniform CD-ROM driver Revision: 3.20
Mar 21 08:35:02 localhost kernel: [4294738.315000] usbcore: registered new driver usbfs
Mar 21 08:35:02 localhost kernel: [4294738.315000] usbcore: registered new driver hub
Mar 21 08:35:02 localhost kernel: [4294738.318000] USB Universal Host Controller Interface driver v2.2
Mar 21 08:35:02 localhost kernel: [4294738.319000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
Mar 21 08:35:02 localhost kernel: [4294738.319000] PCI: setting IRQ 9 as level-triggered
Mar 21 08:35:02 localhost kernel: [4294738.319000] ACPI: PCI Interrupt 0000:00:04.2[D] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9
Mar 21 08:35:02 localhost kernel: [4294738.319000] uhci_hcd 0000:00:04.2: Intel Corporation 82371AB/EB/MB PIIX4 USB
Mar 21 08:35:02 localhost kernel: [4294738.381000] uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1
Mar 21 08:35:02 localhost kernel: [4294738.381000] uhci_hcd 0000:00:04.2: irq 9, io base 0x0000d400
Mar 21 08:35:02 localhost kernel: [4294738.381000] hub 1-0:1.0: USB hub found
Mar 21 08:35:02 localhost kernel: [4294738.381000] hub 1-0:1.0: 2 ports detected
Mar 21 08:35:02 localhost kernel: [4294738.429000] fealnx.c:v2.51 Nov-17-2001
Mar 21 08:35:02 localhost kernel: [4294738.430000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
Mar 21 08:35:02 localhost kernel: [4294738.430000] PCI: setting IRQ 10 as level-triggered
Mar 21 08:35:02 localhost kernel: [4294738.430000] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
Mar 21 08:35:02 localhost kernel: [4294738.430000] eth0: 100/10M Ethernet PCI Adapter at 0001d000, 00:02:44:59:35:6a, IRQ 10.
Mar 21 08:35:02 localhost kernel: [4294741.186000] ACPI: CPU0 (power states: C1[C1] C2[C2])
Mar 21 08:35:02 localhost kernel: [4294761.263000] hdb: dma_timer_expiry: dma status == 0x61
Mar 21 08:35:02 localhost kernel: [4294771.263000] hdb: DMA timeout error
Mar 21 08:35:02 localhost kernel: [4294771.263000] hdb: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
Mar 21 08:35:02 localhost kernel: [4294771.263000]
Mar 21 08:35:02 localhost kernel: [4294771.263000] ide: failed opcode was: unknown
Mar 21 08:35:02 localhost kernel: [4294791.376000] hdb: dma_timer_expiry: dma status == 0x61
Mar 21 08:35:02 localhost kernel: [4294801.376000] hdb: DMA timeout error
Mar 21 08:35:02 localhost kernel: [4294801.376000] hdb: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
Mar 21 08:35:02 localhost kernel: [4294801.376000]
Mar 21 08:35:02 localhost kernel: [4294801.376000] ide: failed opcode was: unknown
Mar 21 08:35:02 localhost kernel: [4294801.493000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
Mar 21 08:35:02 localhost kernel: [4294801.610000] cdrom: open failed.
Mar 21 08:35:02 localhost kernel: [4294801.863000] Attempting manual resume
Mar 21 08:35:02 localhost kernel: [4294801.902000] swsusp: Suspend partition has wrong signature?
Mar 21 08:35:02 localhost kernel: [4294801.970000] kjournald starting.  Commit interval 5 seconds
Mar 21 08:35:02 localhost kernel: [4294801.970000] EXT3-fs: mounted filesystem with ordered data mode.
Mar 21 08:35:02 localhost kernel: [4294805.583000] md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
Mar 21 08:35:02 localhost kernel: [4294812.400000] Adding 430072k swap on /dev/mapper/Ubuntu-swap_1.  Priority:-1 extents:1
Mar 21 08:35:02 localhost kernel: [4294812.801000] EXT3 FS on dm-0, internal journal
Mar 21 08:35:02 localhost kernel: [4294836.881000] parport: PnPBIOS parport detected.
Mar 21 08:35:02 localhost kernel: [4294836.881000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
Mar 21 08:35:02 localhost kernel: [4294836.978000] lp0: using parport0 (interrupt-driven).
Mar 21 08:35:02 localhost kernel: [4294837.052000] mice: PS/2 mouse device common for all mice
Mar 21 08:35:02 localhost kernel: [4294837.304000] logips2pp: Detected unknown logitech mouse model 0
Mar 21 08:35:02 localhost kernel: [4294837.351000] input: ImExPS/2 Logitech Explorer Mouse on isa0060/serio1
Mar 21 08:35:02 localhost kernel: [4294838.361000] ts: Compaq touchscreen protocol output
Mar 21 08:35:02 localhost kernel: [4294842.899000] cdrom: open failed.
Mar 21 08:35:02 localhost kernel: [4294844.675000] kjournald starting.  Commit interval 5 seconds
Mar 21 08:35:02 localhost kernel: [4294844.676000] EXT3 FS on hdb1, internal journal
Mar 21 08:35:02 localhost kernel: [4294844.676000] EXT3-fs: mounted filesystem with ordered data mode.
Mar 21 08:35:02 localhost kernel: [4294848.069000] Linux agpgart interface v0.101 (c) Dave Jones
Mar 21 08:35:02 localhost kernel: [4294848.095000] agpgart: Detected an Intel 440BX Chipset.
Mar 21 08:35:02 localhost kernel: [4294848.142000] agpgart: AGP aperture is 64M @ 0xe4000000
Mar 21 08:35:02 localhost kernel: [4294848.426000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Mar 21 08:35:02 localhost kernel: [4294848.442000] shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
Mar 21 08:35:02 localhost kernel: [4294848.442000] shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
Mar 21 08:35:02 localhost kernel: [4294850.018000] piix4_smbus 0000:00:04.3: Found 0000:00:04.3 device
Mar 21 08:35:02 localhost kernel: [4294853.341000] Real Time Clock Driver v1.12
Mar 21 08:35:02 localhost kernel: [4294853.517000] input: PC Speaker
Mar 21 08:35:02 localhost kernel: [4294853.887000] Floppy drive(s): fd0 is 1.44M
Mar 21 08:35:02 localhost kernel: [4294853.902000] FDC 0 is a post-1991 82077
Mar 21 08:35:02 localhost kernel: [4294854.798000] pnp: Device 01:01.01 activated.
Mar 21 08:35:02 localhost kernel: [4294854.820000] gameport: NS558 PnP Gameport is pnp01:01.01/gameport0, io 0x200, speed 727kHz
Mar 21 08:35:02 localhost kernel: [4294862.586000] ACPI: Power Button (FF) [PWRF]
Mar 21 08:35:02 localhost kernel: [4294862.586000] ACPI: Power Button (CM) [PWRB]
Mar 21 08:35:02 localhost kernel: [4294862.880000] ibm_acpi: ec object not found
Mar 21 08:35:10 localhost hp: unable to open /var/run/hplip/hpiod.port: No such file or directory: prnt/hpijs/hplip_api.c 75
Mar 21 08:35:10 localhost hpiod: 0.9.5 accepting connections at 32769...
Mar 21 08:35:20 localhost python: hpssd [ERROR] Unable to connect to hpiod.
Mar 21 08:35:20 localhost kernel: [4294883.418000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
Mar 21 08:35:20 localhost kernel: [4294883.418000] apm: overridden by ACPI.
Mar 21 08:35:24 localhost hcid[6467]: Bluetooth HCI daemon
Mar 21 08:35:24 localhost kernel: [4294886.926000] Bluetooth: Core ver 2.7
Mar 21 08:35:24 localhost kernel: [4294886.926000] NET: Registered protocol family 31
Mar 21 08:35:24 localhost kernel: [4294886.926000] Bluetooth: HCI device and connection manager initialized
Mar 21 08:35:24 localhost kernel: [4294886.926000] Bluetooth: HCI socket layer initialized
Mar 21 08:35:24 localhost kernel: [4294887.014000] Bluetooth: L2CAP ver 2.7
Mar 21 08:35:24 localhost kernel: [4294887.014000] Bluetooth: L2CAP socket layer initialized
Mar 21 08:35:24 localhost sdpd[6473]: Bluetooth SDP daemon
Mar 21 08:35:24 localhost kernel: [4294887.079000] Bluetooth: RFCOMM ver 1.5
Mar 21 08:35:24 localhost kernel: [4294887.079000] Bluetooth: RFCOMM socket layer initialized
Mar 21 08:35:24 localhost kernel: [4294887.079000] Bluetooth: RFCOMM TTY layer initialized
Mar 21 08:35:24 localhost anacron[6502]: Anacron 2.3 started on 2006-03-21
Mar 21 08:35:24 localhost anacron[6502]: Normal exit (0 jobs run)
Mar 21 08:35:25 localhost /usr/sbin/cron[6527]: (CRON) INFO (pidfile fd = 3)
Mar 21 08:35:25 localhost /usr/sbin/cron[6528]: (CRON) STARTUP (fork ok)
Mar 21 08:35:25 localhost /usr/sbin/cron[6528]: (CRON) INFO (Running @reboot jobs)
Mar 21 08:35:46 localhost gconfd (thustoon-6661): iniciando (versão 2.12.0), pid 6661 usuário 'thustoon'
Mar 21 08:35:46 localhost gconfd (thustoon-6661): Endereço "xml:readonly:/etc/gconf/gconf.xml.mandatory" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 0
Mar 21 08:35:46 localhost gconfd (thustoon-6661): Endereço "xml:readonly:/usr/share/gconf/local.mandatory" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 1
Mar 21 08:35:46 localhost gconfd (thustoon-6661): O endereço "xml:readwrite:/home/thustoon/.gconf" resolvido para uma fonte de configuração com permissões de escrita na posição 2
Mar 21 08:35:46 localhost gconfd (thustoon-6661): Endereço "xml:readonly:/etc/gconf/gconf.xml.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 3
Mar 21 08:35:46 localhost gconfd (thustoon-6661): Endereço "xml:readonly:/usr/share/gconf/local.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 4
Mar 21 08:35:46 localhost gconfd (thustoon-6661): Endereço "xml:readonly:/usr/share/gconf/cdd.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 5
Mar 21 08:35:46 localhost gconfd (thustoon-6661): Endereço "xml:readonly:/usr/share/gconf/debian.defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 6
Mar 21 08:35:46 localhost gconfd (thustoon-6661): Endereço "xml:readonly:/var/lib/gconf/defaults" resolvido para uma fonte de configuração com permissões apenas de leitura na posição 7
Mar 21 08:35:47 localhost kernel: [4294910.314000] NET: Registered protocol family 10
Mar 21 08:35:47 localhost kernel: [4294910.314000] Disabled Privacy Extensions on device c02eb280(lo)
Mar 21 08:35:47 localhost kernel: [4294910.315000] IPv6 over IPv4 tunneling driver
Mar 21 08:36:12 localhost gconfd (thustoon-6661): O endereço "xml:readwrite:/home/thustoon/.gconf" resolvido para uma fonte de configuração com permissões de escrita na posição 0
Mar 21 08:37:24 localhost kernel: [4295007.277000] CSLIP: code copyright 1989 Regents of the University of California
Mar 21 08:37:24 localhost kernel: [4295007.294000] PPP generic driver version 2.4.2
Mar 21 08:37:24 localhost kernel: [4295007.354000] NET: Registered protocol family 24
Mar 21 08:37:30 localhost kernel: [4295013.474000] NET: Registered protocol family 17
Mar 21 08:37:41 localhost kernel: [4295023.787000] eth0: no IPv6 routers present
Mar 21 08:41:01 localhost kernel: [4295223.978000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
Mar 21 08:41:01 localhost kernel: [4295223.978000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
Mar 21 08:41:01 localhost kernel: [4295224.093000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
Mar 21 08:41:01 localhost kernel: [4295224.093000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
Mar 21 08:42:29 localhost pppd[7450]: Plugin rp-pppoe.so loaded.
Mar 21 08:42:29 localhost pppd[7452]: pppd 2.4.3 started by root, uid 0
Mar 21 08:42:29 localhost pppd[7452]: PPP session is 317
Mar 21 08:42:29 localhost pppd[7452]: Using interface ppp0
Mar 21 08:42:29 localhost pppd[7452]: Connect: ppp0 <--> eth0
Mar 21 08:42:29 localhost pppd[7452]: Couldn't increase MTU to 1500
Mar 21 08:42:29 localhost pppd[7452]: Couldn't increase MRU to 1500
Mar 21 08:42:30 localhost pppd[7452]: Couldn't increase MRU to 1500
Mar 21 08:42:30 localhost pppd[7452]: PAP authentication succeeded
Mar 21 08:42:30 localhost pppd[7452]: peer from calling number 00:90:1A:41:B2:95 authorized
Mar 21 08:42:30 localhost pppd[7452]: Cannot determine ethernet address for proxy ARP
Mar 21 08:42:30 localhost pppd[7452]: local  IP address 201.48.113.102
Mar 21 08:42:30 localhost pppd[7452]: remote IP address 200.225.196.100
Mar 21 08:42:30 localhost pppd[7452]: primary   DNS address 200.225.197.34
Mar 21 08:42:30 localhost pppd[7452]: secondary DNS address 200.225.197.37
Mar 21 08:42:30 localhost kernel: [4295313.441000] ip_tables: (C) 2000-2002 Netfilter core team
Mar 21 08:42:43 localhost kernel: [4295326.309000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
Mar 21 08:42:43 localhost kernel: [4295326.309000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
Mar 21 08:42:43 localhost kernel: [4295326.439000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
Mar 21 08:42:43 localhost kernel: [4295326.439000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
Mar 21 08:42:43 localhost kernel: [4295326.624000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
Mar 21 08:42:43 localhost kernel: [4295326.624000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
Mar 21 08:42:44 localhost kernel: [4295326.745000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
Mar 21 08:42:44 localhost kernel: [4295326.745000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
Mar 21 08:48:29 localhost kernel: [4295672.683000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
Mar 21 08:48:29 localhost kernel: [4295672.683000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
Mar 21 08:48:30 localhost kernel: [4295672.795000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
Mar 21 08:48:30 localhost kernel: [4295672.795000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
Mar 21 08:48:34 localhost kernel: [4295677.268000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
Mar 21 08:48:34 localhost kernel: [4295677.268000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
Mar 21 08:48:34 localhost kernel: [4295677.392000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
Mar 21 08:48:34 localhost kernel: [4295677.392000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
Mar 21 08:48:34 localhost kernel: [4295677.506000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
Mar 21 08:48:34 localhost kernel: [4295677.506000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
Mar 21 08:48:35 localhost kernel: [4295678.656000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
Mar 21 08:48:35 localhost kernel: [4295678.656000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
Mar 21 08:49:45 localhost kernel: [4295748.693000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
Mar 21 08:49:45 localhost kernel: [4295748.693000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
Mar 21 08:49:46 localhost kernel: [4295748.796000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
Mar 21 08:49:46 localhost kernel: [4295748.796000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it kn[/code]

Eu ainda não desabilitei os serviços, ate que o boot devagar não me incomoda tanto. O que mais me deixa frustrado é não ter conseguido configurar minha placa de som. To sem som, se pelo menos eu tivesse som aqui eu ficaria mais tranquilo. To tentando seguir os tutoriais que acho, mas não consigo achar nada de forma bem clara, de um jeito que eu possa fazer e funcionar certo sem problemas. Tenho uma Sound Blaster Awe 64.PElo que vi no log, ele ta detectando a placa de som.

Alysson Neto

#23
22 de Março de 2006, 17:11
Não achei o motivo de ter que desconectar para usar os programas, quanto a sua placa achei esse post no forum gringo http://ubuntuforums.org/showthread.php?t=1805
"Eu rejeito sua realidade e substituo pela minha" Adam Savage,

xThustoonx

#24
23 de Março de 2006, 14:53
N3t0 consegui mexer nas opções de volume, mas meu som não funciona. Mas antes de processiguir, decidi seguir o conselho de vcs e instalar o XFCE. Eu rodei o comando:

sudo apt-get install xubuntu-desktop

Ele fez alguns dowloads, porém como faço agora para executar o XFCE? REbootei o sistema mas não aparece opção para escolher qual gerenciador de janelas usar...

xThustoonx

#25
23 de Março de 2006, 15:45
Citação de: "xThustoonx"N3t0 consegui mexer nas opções de volume, mas meu som não funciona. Mas antes de processiguir, decidi seguir o conselho de vcs e instalar o XFCE. Eu rodei o comando:

sudo apt-get install xubuntu-desktop

Ele fez alguns dowloads, porém como faço agora para executar o XFCE? REbootei o sistema mas não aparece opção para escolher qual gerenciador de janelas usar...


Pode deixar, o burrao aqui ja descobriu.
Cliquei em sessão e achei a opção para XFCE.

xThustoonx

#26
26 de Março de 2006, 14:24
REsolvi meu problema do som. Acho que depois vou postar aqui o que eu fiz que resolveu meu problema...

xThustoonx

#27
27 de Março de 2006, 08:22
Primeiro eu executei os comandos:

sudo -s
modprobe snd-sbawe;modprobe snd-pcm-oss;
modprobe snd-mixer-oss;modprobe snd-seq-oss

$ sudo modprobe sb

Não apareceu mensagem de erro nenhuma. Depois eu acrescentem em /etc/modules a linha:

sb io=0x220 irq=5 dma=1 dma16=3

Feito isso, eu reinstalei os drivers alsa. Voila! REbootei, o som esta funcinando, pelo menos pelo xmms. Mas no reboot ele fala que não encontrou a placa. O importante é que agora posso ouvir meus mp3 sossegadamente no ubuntu.

Minha placa é uma SOUND BLASTER AWE 64.
Imprimir
Ir para Topo Páginas 1 2
Ações