rede wife, placa mae Asus p5k3 deluxe. URGENTE!!!!!

kuroobi · 22 de Janeiro de 2009, 01:20

Salveee amigos!
Alguem pode me ajudar a instalar uma rede wife?

Minha placa mae eh uma Asus p5k3 deluxe, nao sei o nome da placa de rede la, no manual ta escrito asus wifi-ap solo uhauhauh
nao manjo nada, pelo que li ate aqui, nada consegui.

como vi, rodei o comando sudo lspci

aqui esta a resposta, se alguem me ajudar agrade;co mto

cyberox@cyberox-desktop:~$ sudo lspci
[sudo] password for cyberox:
00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 02)
00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 02)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02)
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02)
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02)
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)
00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 4 port SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)
00:1f.5 IDE interface: Intel Corporation 82801I (ICH9 Family) 2 port SATA IDE Controller (rev 02)
01:00.0 VGA compatible controller: nVidia Corporation G94 [GeForce 9600 GT] (rev a1)
02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller (rev 12)
03:00.0 SATA controller: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 03)
03:00.1 IDE interface: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 03)
05:03.0 FireWire (IEEE 1394): Agere Systems FW323 (rev 70)
05:04.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet (rev 10)
cyberox@cyberox-desktop:~$

qual eh a minha placa?? como instalo por favor?
ainda nao manjo quase nada, ja li bastante to cansado, se alguem nao me ajudar nao vou conseguir, sozinho soh consegui ate aqui,.

vlwww

kuroobi · 22 de Janeiro de 2009, 01:40

nao sei se ajuda, fui procurar no cd da placa, achei isso ( olha o caminho, tem drive wife, agora nao sei o qual instalo, nem como instalo, sera q to com a chave na mao, eh soh abrir a porta? alguem pode me ajudar pelo amor de Deus

kuroobi · 22 de Janeiro de 2009, 01:41

no Redme.txt ta escrito isso

Release Date: 2006-01-24, ver 1.1

RTL8187 Linux driver version 1.1

--This driver supports RealTek RTL8187 Wireless LAN driver for Linux Debian3.1 kernel 2.6.13

//-----------------------------------------------------------------------------

// Files description.

//-----------------------------------------------------------------------------

1. Include ko files

module_DB31.tar.gz

2. Script to load/unload modules

./load

./unload

3. Supplicant source code:

./wpa_supplicant-0.3.8.tar.gz

4. Example of supplicant configuration file:

./wpa1.conf

//-----------------------------------------------------------------------------

// Insert modules.

//-----------------------------------------------------------------------------

1. Insert modules:

insmod ieee80211_crypt-rtl.ko

insmod ieee80211_crypt_wep-rtl.ko

insmod ieee80211_crypt_tkip-rtl.ko

insmod ieee80211_crypt_ccmp-rtl.ko

insmod ieee80211-rtl.ko

insmod r8187.ko

//-----------------------------------------------------------------------------

// Remove modules.

//-----------------------------------------------------------------------------

1. Remove related modules:

rmmod r8187.ko

rmmod ieee80211-rtl.ko

rmmod ieee80211_crypt_ccmp-rtl.ko

rmmod ieee80211_crypt_tkip-rtl.ko

rmmod ieee80211_crypt_wep-rtl.ko

rmmod ieee80211_crypt-rtl.ko

//-----------------------------------------------------------------------------

// Enable the device.

//-----------------------------------------------------------------------------

1. Make sure RTL8187 dongle is plugged.

2. Enalbe the device:

ifconfig wlan0 up

//-----------------------------------------------------------------------------

// Disable the device.

//-----------------------------------------------------------------------------

1. Disable the device:

ifconfig wlan0 down

//-----------------------------------------------------------------------------

// Join a BSS and set up IP address.

//-----------------------------------------------------------------------------

1. Scan BSS available:

iwlist wlan0 scan

2. Join a BSS:

iwconfig wlan0 essid SSID_TO_JOIN

3. Set up IP address of the device:

ifconfig wlan0 IP_ADDRESS

//-----------------------------------------------------------------------------

// WPA supplicant

//-----------------------------------------------------------------------------

1. Unpack source code of WPA supplicant:

tar -zxvf wpa_supplicant-0.3.8.tar.gz

cd wpa_supplicant-0.3.8

2. Create .config file:

cp defconfig .config

3. Edit .config file, uncomment the following line:

#CONFIG_DRIVER_IPW=y.

4. Build WPA supplicant:

make

5. Edit wpa_supplicant.conf to set up SSID and its passphrase.

For example, the following setting in "wpa1.conf" means SSID to join is "BufAG54_Ch6"

and its passphrase is "87654321".

network={

ssid="BufAG54_Ch6"

proto=WPA

key_mgmt=WPA-PSK

pairwise=CCMP TKIP

group=CCMP TKIP WEP104 WEP40

psk="87654321"

priority=2

}

6. Execute WPA supplicant (Assume 8187 and related modules had been loaded):

./wpa_supplicant -D ipw -c wpa1.conf -i wlan0 &
Editar/Apagar Mensagem Responder Com Citação Multi-Quote Nessa Mensagem Resposta Rápida a essa mensagem
kuroobi
Ver Perfil Público
Enviar mensagem privada para kuroobi
Procurar todas as respostas por kuroobi
Adicionar kuroobi em seus Contatos
#4 (permalink) (permalink) Adicionar na Reputação de kuroobi's Denunciar Mensagem
Antigo 22/01/2009, 01:38
Avatar de kuroobi
kuroobi kuroobi está online agora [Criador deste tópico]
Usuário Registrado
kuroobi's Profile Fields

Data de Entrada: Jun 2008
Referências: (0)(0%+)
Mensagens: 346
kuroobi está em um caminho distinto
no Redme.txt ta escrito isso

Release Date: 2006-01-24, ver 1.1

RTL8187 Linux driver version 1.1

--This driver supports RealTek RTL8187 Wireless LAN driver for Linux Debian3.1 kernel 2.6.13

//-----------------------------------------------------------------------------

// Files description.

//-----------------------------------------------------------------------------

1. Include ko files

module_DB31.tar.gz

2. Script to load/unload modules

./load

./unload

3. Supplicant source code:

./wpa_supplicant-0.3.8.tar.gz

4. Example of supplicant configuration file:

./wpa1.conf

//-----------------------------------------------------------------------------

// Insert modules.

//-----------------------------------------------------------------------------

1. Insert modules:

insmod ieee80211_crypt-rtl.ko

insmod ieee80211_crypt_wep-rtl.ko

insmod ieee80211_crypt_tkip-rtl.ko

insmod ieee80211_crypt_ccmp-rtl.ko

insmod ieee80211-rtl.ko

insmod r8187.ko

//-----------------------------------------------------------------------------

// Remove modules.

//-----------------------------------------------------------------------------

1. Remove related modules:

rmmod r8187.ko

rmmod ieee80211-rtl.ko

rmmod ieee80211_crypt_ccmp-rtl.ko

rmmod ieee80211_crypt_tkip-rtl.ko

rmmod ieee80211_crypt_wep-rtl.ko

rmmod ieee80211_crypt-rtl.ko

//-----------------------------------------------------------------------------

// Enable the device.

//-----------------------------------------------------------------------------

1. Make sure RTL8187 dongle is plugged.

2. Enalbe the device:

ifconfig wlan0 up

//-----------------------------------------------------------------------------

// Disable the device.

//-----------------------------------------------------------------------------

1. Disable the device:

ifconfig wlan0 down

//-----------------------------------------------------------------------------

// Join a BSS and set up IP address.

//-----------------------------------------------------------------------------

1. Scan BSS available:

iwlist wlan0 scan

2. Join a BSS:

iwconfig wlan0 essid SSID_TO_JOIN

3. Set up IP address of the device:

ifconfig wlan0 IP_ADDRESS

//-----------------------------------------------------------------------------

// WPA supplicant

//-----------------------------------------------------------------------------

1. Unpack source code of WPA supplicant:

tar -zxvf wpa_supplicant-0.3.8.tar.gz

cd wpa_supplicant-0.3.8

2. Create .config file:

cp defconfig .config

3. Edit .config file, uncomment the following line:

#CONFIG_DRIVER_IPW=y.

4. Build WPA supplicant:

make

5. Edit wpa_supplicant.conf to set up SSID and its passphrase.

For example, the following setting in "wpa1.conf" means SSID to join is "BufAG54_Ch6"

and its passphrase is "87654321".

network={

ssid="BufAG54_Ch6"

proto=WPA

key_mgmt=WPA-PSK

pairwise=CCMP TKIP

group=CCMP TKIP WEP104 WEP40

psk="87654321"

priority=2

}

6. Execute WPA supplicant (Assume 8187 and related modules had been loaded):

./wpa_supplicant -D ipw -c wpa1.conf -i wlan0 &

clcampos · 30 de Janeiro de 2009, 11:04

Tópico trancado.

rede wife, placa mae Asus p5k3 deluxe. URGENTE!!!!!

kuroobi

kuroobi

kuroobi

clcampos