Como eu faço para ver a temperatura de minha CPU?

eliasdiniz · 24 de Março de 2006, 19:51

podem me ajudar?

Meu processador eh um sempron.
Quando utilizo muito o ubuntu o sistema finaliza e mostra uma mensagem dizendo q a temperatura do processador tah muito alta.(em torno de 60°).
60° eh uma temperatura muito alta para um sempron?

pelo sensors saiu essas informações abaixo,
O que eu posso fazer para acabar com esse desligamento automático?

it87-isa-0290
Adapter: ISA adapter
VCore 1: +1.70 V (min = +1.42 V, max = +1.57 V) ALARM
VCore 2: +3.31 V (min = +2.40 V, max = +2.61 V) ALARM
+3.3V: +5.92 V (min = +3.14 V, max = +3.46 V) ALARM
+5V: +5.21 V (min = +4.76 V, max = +5.24 V)
+12V: +8.38 V (min = +11.39 V, max = +12.61 V) ALARM
-12V: -13.37 V (min = -12.63 V, max = -11.41 V) ALARM
-5V: -7.68 V (min = -5.26 V, max = -4.77 V) ALARM
Stdby: +3.28 V (min = +4.76 V, max = +5.24 V) ALARM
VBat: +0.00 V
fan1: 4821 RPM (min = 0 RPM, div =

fan2: 0 RPM (min = 664 RPM, div =

ALARM
fan3: 0 RPM (min = 664 RPM, div =

M/B Temp: +55°C (low = +15°C, high = +40°C) sensor = diode
CPU Temp: +0°C (low = +15°C, high = +45°C) sensor = disabled
Temp3: +0°C (low = +15°C, high = +45°C) sensor = disabled

desde já muito obrigado!

carlos2 · 08 de Agosto de 2006, 16:02

Tem determinadas placas que o sensors ainda não é compativel.
Por exemplo a minha é a P4S800, que o sensors só detecta a memória.
Para ver a temperatura eu uso o mbmon, ele lista as voltagens, temperaturas, e a velocidade da fan.

tem no repositório do ubuntu

no teminal:
sudo apt-get install mbmon;
depois é so entrar
sudo mbmon

carlos2

dudu_ubuntun · 31 de Agosto de 2006, 10:04

Ola
é impressão minha ou o sensors nao conseguiu detectar minha o chipset da minha cpu:

eduardo@eduardo:~$ sensors
it87-isa-0290
Adapter: ISA adapter
VCore 1: +1.49 V (min = +0.00 V, max = +4.08 V)
VCore 2: +2.94 V (min = +1.28 V, max = +1.68 V) ALARM
+3.3V: +5.66 V (min = +5.57 V, max = +7.55 V)
+5V: +5.19 V (min = +4.49 V, max = +5.48 V)
+12V: +7.49 V (min = +9.98 V, max = +13.95 V) ALARM
-12V: -11.77 V (min = -22.94 V, max = -17.05 V) ALARM
-5V: -2.76 V (min = -9.14 V, max = -7.75 V) ALARM
Stdby: +3.95 V (min = +4.49 V, max = +5.48 V) ALARM
VBat: +0.00 V
fan1: 4218 RPM (min = 664 RPM, div =

fan2: 0 RPM (min = 41 RPM, div = 128) ALARM
fan3: 0 RPM (min = 0 RPM, div = 2)
M/B Temp: +44°C (low = +127°C, high = +80°C) sensor = diode
CPU Temp: +0°C (low = +127°C, high = +126°C) sensor = disabled
Temp3: +0°C (low = +127°C, high = +126°C) sensor = disabled

Abaixo o cpuinfo:
eduardo@eduardo:~$ cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 8
model name : AMD Duron(tm) processor
stepping : 1
cpu MHz : 1800.157
cache size : 64 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow
bogomips : 3601.49

o resultado do sensors-detected:
#----cut here----
# I2C adapter drivers
# modprobe unknown adapter bt878 #0 [sw]
# modprobe unknown adapter NVIDIA I2C Device
# modprobe unknown adapter NVIDIA I2C Device
# modprobe unknown adapter NVIDIA I2C Device
i2c-sis96x
i2c-isa
# I2C chip drivers
eeprom
it87
#----cut here----

também tenho instalado o hddtemp que meu esse resultado:

eduardo@eduardo:~$ sudo hddtemp /dev/hda
/dev/hda: ST380011A: 37°C

Quando vou levantar o modulo do snesor tenho essa resposta:
eduardo@eduardo:~$ sudo modprobe i2c-sensor
FATAL: Module i2c_sensor not found.

Os ouyros modulos (i2c-sis96x, i2c-isa, eeprom, it87) levantam corretamente.
Pq o sensors nao mostra a temperatura da CPU???
Tem como o sensors mostrar também a temperatura do como o hddtemp?
Pela análise do o sensors meu pc tá mto ruim?
valeu

raphabonelli · 31 de Agosto de 2006, 12:13

Quando tento o

$sudo sensors-detect

Recebo um:
No i2c device files found. Use prog/mkdev/mkdev.sh to create them.

Kamei Hyoga · 31 de Agosto de 2006, 13:26

Citação de: mur online 07 de Março de 2006, 19:20

Eu também fiquei preocupado agora...
o que viria a ser essa linha:

Código Selecionar Expandir
+3.3V: +6.37 V (min = +3.14 V, max = +3.46 V) ALARM

Parece que não ta certo né?

Esse ALARM, pelo o q eu entendi, são os valores mínimos e máximos configurados. Se em algum momento esses valores forem atingidos. tanto o min. quanto o max. , um o alarme será ativado lhe avisando da situação.

ins3rt c0in · 11 de Setembro de 2006, 19:50

Eu tenho instalado aqui o sensors-applet, ele fica na barra do gnome mostrando a temperatura o tempo todo !

http://sensors-applet.sourceforge.net/index.php?content=packages

dudu_ubuntun · 12 de Setembro de 2006, 09:26

Realmente o applet ficou legal, coloquei para mostrar a CPU e a M/B, mas como a gente sempre quer mais...faltou a temperatura do hd (hddtemp) procurei alum applet para o hddtemp mas nao consegui, alguem sabe de algum?

silverfox · 12 de Setembro de 2006, 17:40

instalei o lm_sensors aqui

mas deu o seguinte erro

Código Selecionar

No i2c device files found. Use prog/mkdev/mkdev.sh to create them.

dudu_ubuntun · 13 de Setembro de 2006, 00:48

executa o mkdev.sh e depois o sensors-detected

tem o forum gringo que me ajudou bastante:
http://ubuntuforums.org/showthread.php?t=2780

silverfox · 13 de Setembro de 2006, 02:33

segui o topico desse forum, ja esta funcionando aqui...

instalei também o sensors-applet

Código Selecionar

silver@ubuntu:~$ sensors
w83697hf-isa-0290
Adapter: ISA adapter
VCore:     +1.58 V  (min =  +1.71 V, max =  +1.89 V)       ALARM
+3.3V:     +3.36 V  (min =  +3.14 V, max =  +3.47 V)
+5V:       +5.08 V  (min =  +4.76 V, max =  +5.24 V)
+12V:     +11.86 V  (min = +10.82 V, max = +13.19 V)
-12V:     -13.02 V  (min = -13.18 V, max = -10.80 V)
-5V:       -5.05 V  (min =  -5.25 V, max =  -4.75 V)
V5SB:      +5.54 V  (min =  +4.76 V, max =  +5.24 V)       ALARM
VBat:      +3.62 V  (min =  +2.40 V, max =  +3.60 V)       ALARM
fan1:     1534 RPM  (min = 67500 RPM, div = 4)              ALARM
fan2:     3096 RPM  (min =   -1 RPM, div = 2)              ALARM
temp1:       +41°C  (high =    +0°C, hyst =    +0°C)   sensor = thermistor   ALARM
temp2:     +47.0°C  (high =   +80°C, hyst =   +75°C)   sensor = thermistor
alarms:   Chassis intrusion detection                      ALARM
beep_enable:
          Sound alarm enabled

KurtKraut · 17 de Setembro de 2006, 16:02

Citação de: LedStyle online 08 de Março de 2006, 01:33
Acho que o que interessa é isso aqui:

Código Selecionar Expandir
M/B Temp: +41°C (low = -1°C, high = -1°C) sensor = thermistor CPU Temp: +63°C (low = +70°C, high = +80°C) sensor = thermistor

A primeira é a temperatura da placa mãe. A segunda a do processador.

Aloha,

M/B é a temperatura da RAM

DigoUnited · 05 de Julho de 2007, 13:45

Olha que estranho.. o meu só mostra isso aqui:

rodrigo@rodrigo-desktop:~$ sensors
k8temp-pci-00c3
Adapter: PCI adapter
Core0 Temp:
+37°C
Core1 Temp:
+37°C

rodrigo@rodrigo-desktop:~$

o q é isso e porque nao mostra o resto todo igual os citados no topico?

qdo eu digito sudo sensors-detect aparece:

rodrigo@rodrigo-desktop:~$ sudo sensors-detect
# sensors-detect revision 4171 (2006-09-24 03:37:01 -0700)

This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.

We can start with probing for (PCI) I2C or SMBus adapters.
Do you want to probe now? (YES/no): y
Probing for PCI bus adapters...
Found unknown SMBus adapter 10de:03eb at 0000:00:01.1.
Sorry, no known PCI bus adapters found.

We will now try to load each adapter module in turn.
If you have undetectable or unsupported adapters, you can have them
scanned by manually loading the modules before running this script.

To continue, we need module `i2c-dev' to be loaded.
Do you want to load `i2c-dev' now? (YES/no): y
Module loaded successfully.

We are now going to do the I2C/SMBus adapter probings. Some chips may
be double detected; we choose the one with the highest confidence
value in that case.
If you found that the adapter hung after probing a certain address,
you can specify that address to remain unprobed.

Next adapter: NVIDIA i2c adapter 2 at 0:0d.0
Do you want to scan it? (YES/no/selectively): yes

Next adapter: NVIDIA i2c adapter 1 at 0:0d.0
Do you want to scan it? (YES/no/selectively): yes
Client found at address 0x37
Client found at address 0x50
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... Success!
(confidence 1, driver `eeprom')
Probing for `EDID EEPROM'... Success!
(confidence 8, driver `eeprom'), other addresses: 0x51 0x52 0x53 0x54 0x55 0x56 0x57
Probing for `Maxim MAX6900'... No
Client found at address 0x51
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... Success!
(confidence 1, driver `eeprom')
Client found at address 0x52
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... Success!
(confidence 1, driver `eeprom')
Client found at address 0x53
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... Success!
(confidence 1, driver `eeprom')
Client found at address 0x54
Probing for `SPD EEPROM'... Success!
(confidence 1, driver `eeprom')
Client found at address 0x55
Probing for `SPD EEPROM'... Success!
(confidence 1, driver `eeprom')
Client found at address 0x56
Probing for `SPD EEPROM'... Success!
(confidence 1, driver `eeprom')
Client found at address 0x57
Probing for `SPD EEPROM'... Success!
(confidence 1, driver `eeprom')
Probing for `Sony Vaio EEPROM'... No

Next adapter: NVIDIA i2c adapter 0 at 0:0d.0
Do you want to scan it? (YES/no/selectively): y

Some chips are also accessible through the ISA I/O ports. We have to
write to arbitrary I/O ports to probe them. This is usually safe though.
Yes, you do have ISA I/O ports even if you do not have any ISA slots!
Do you want to scan the ISA I/O ports? (YES/no): y
Probing for `National Semiconductor LM78' at 0x290... No
Probing for `National Semiconductor LM78-J' at 0x290... No
Probing for `National Semiconductor LM79' at 0x290... No
Probing for `Winbond W83781D' at 0x290... No
Probing for `Winbond W83782D' at 0x290... No
Probing for `Winbond W83627HF' at 0x290... No
Probing for `Silicon Integrated Systems SIS5595'... No
Probing for `VIA VT82C686 Integrated Sensors'... No
Probing for `VIA VT8231 Integrated Sensors'... No
Probing for `AMD K8 thermal sensors'... Success!
(confidence 9, driver `k8temp')
Probing for `IPMI BMC KCS' at 0xca0... No
Probing for `IPMI BMC SMIC' at 0xca8... No

Some Super I/O chips may also contain sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no): y
Probing for Super-I/O at 0x2e/0x2f
Trying family `ITE'... Yes
Found unknown chip with ID 0x8726
(logical device 4 has address 0x290, could be sensors)
Trying family `National Semiconductor'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Fintek'... No
Probing for Super-I/O at 0x4e/0x4f
Trying family `ITE'... No
Trying family `National Semiconductor'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Fintek'... No

Now follows a summary of the probes I have just done.
Just press ENTER to continue:

Driver `eeprom' (should be inserted):
Detects correctly:
* Bus `NVIDIA i2c adapter 1 at 0:0d.0'
Busdriver `UNKNOWN', I2C address 0x50 (and 0x51 0x52 0x53 0x54 0x55 0x56 0x57)
Chip `EDID EEPROM' (confidence:

EEPROMs are *NOT* sensors! They are data storage chips commonly
found on memory modules (SPD), in monitors (EDID), or in some
laptops, for example.

Driver `k8temp' (should be inserted):
Detects correctly:
* ISA bus, undetermined address (Busdriver `i2c-isa')
Chip `AMD K8 thermal sensors' (confidence: 9)

I will now generate the commands needed to load the required modules.
Just press ENTER to continue:

To make the sensors modules behave correctly, add these lines to
/etc/modules:

#----cut here----
# I2C adapter drivers
# modprobe unknown adapter NVIDIA i2c adapter 0 at 0:0d.0
# modprobe unknown adapter NVIDIA i2c adapter 1 at 0:0d.0
# modprobe unknown adapter NVIDIA i2c adapter 2 at 0:0d.0
# Chip drivers
eeprom
k8temp
#----cut here----

Do you want to add these lines to /etc/modules automatically? (yes/NO)y
rodrigo@rodrigo-desktop:~$

Herofmb · 27 de Novembro de 2008, 12:11

Revivendo o tópico, estou conseguindo ver, atraves do sensors, a maior parte das temperaturas do meu pc, mas a M/B nao aparece. Uso uma mobo DG31PR da intel.

Tentei o mbmon mas aparece uma mensagem:

No Hardware Monitor found!!
InitMBInfo: Success

Pelo jeito essa placa mãe é chatinha de mostrar sua temp, alguem tem alguma ideia?

Aproveito pra deixar as estatisticas do sensors pra ver se está tudo ok =p

w83627dhg-isa-0290
Adapter: ISA adapter
VCore: +1.18 V (min = +0.00 V, max = +1.74 V)
in1: +10.61 V (min = +8.61 V, max = +5.60 V) ALARM
AVCC: +3.38 V (min = +2.43 V, max = +1.89 V) ALARM
3VCC: +3.38 V (min = +0.43 V, max = +0.03 V) ALARM
in4: +1.86 V (min = +0.51 V, max = +1.71 V) ALARM
in5: +1.25 V (min = +0.03 V, max = +1.73 V)
in6: +0.36 V (min = +0.56 V, max = +0.05 V) ALARM
VSB: +3.30 V (min = +2.16 V, max = +2.51 V) ALARM
VBAT: +3.17 V (min = +2.24 V, max = +1.10 V) ALARM
Case Fan: 0 RPM (min = 10546 RPM, div = 128) ALARM
CPU Fan: 969 RPM (min = 998 RPM, div =

ALARM
Aux Fan: 0 RPM (min = 10546 RPM, div = 128) ALARM
fan4: 0 RPM (min = 10546 RPM, div = 128) ALARM
fan5: 0 RPM (min = 10546 RPM, div = 128) ALARM
Sys Temp: +54.0°C (high = -93.0°C, hyst = +66.0°C) sensor = diode
CPU Temp: +39.0°C (high = +80.0°C, hyst = +75.0°C) sensor = diode
AUX Temp: +121.5°C (high = +80.0°C, hyst = +75.0°C) ALARM sensor = thermistor
cpu0_vid: +0.000 V

coretemp-isa-0000
Adapter: ISA adapter
Core 0: +31.0°C (crit = +85.0°C)

coretemp-isa-0001
Adapter: ISA adapter
Core 1: +31.0°C (crit = +85.0°C)

VLW

Como eu faço para ver a temperatura de minha CPU?

eliasdiniz