[AJUDA]Instalação modem no Ubuntu 8.04 no notebook Intelbrás N6000W

[Raphaell Borralho]

Bom, sou bem novo usuário de linux, optei pela distribuição Ubuntu Linux 8.04 - Hardy Heron, meus drivers identificaram tudo blz, so q eu uso internet discada um dos poucos drivers que nao identificou foi o do modem... já procurei diversos forum explicando como instalar o modem(winmodem), so que primeiro, nao consigo identificar o driver do modem, por tanto fiz diversos teste com vários drivers(slmodem-2.9.11-20080817,slamr-2.6.22-14-generic,SLMODEMD.gcc4.2) e ja segui diversos tutoriais e todos eles falharam...da erro no comando make.
Consegui instalar o Gnome PPP para criar um "discador", deu certo! mas... quando vo testar o modem ele da erro, diz que "o sistema nao conseguiu identificar o modem", e nao disca!!
Peço ajuda de vcs para instalar o modem, para começar usei o scanModem e ele me disse isso:

Only plain text email is forwarded by the  Discuss@Linmodems.org List Server,
as HTML can contain viruses. Use as the email Subject Line:
           YourName, YourCountry  kernel 2.6.24-19-generic
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@Linmodems.org are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
--------------------------  System information ----------------------------
CPU=i686, 
Linux version 2.6.24-19-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed Jun 18 14:43:41 UTC 2008
scanModem update of:  2008_10_24
The modem symbolic link is /dev/modem -> ttySL0
There are no blacklisted modem drivers in /etc/modprobe*  files
Attached USB devices are:
ID 0bda:0158 Realtek Semiconductor Corp.
ID 04f2:b052 Chicony Electronics Co., Ltd
ID 147e:2016 

USB modems not recognized

For candidate card in slot 00:1b.0, firmware information and bootup diagnostics are:
PCI slot   PCI ID      SubsystemID   Name
----------   ---------   ---------   --------------
00:1b.0   8086:284b   10ec:0268   Audio device: Intel Corporation 82801H

Modem interrupt assignment and sharing:
23:        342        331   IO-APIC-fasteoi   HDA Intel
--- Bootup diagnostics for card in PCI slot 00:1b.0 ----
[   53.000620] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 23
[   53.000649] PCI: Setting latency timer of device 0000:00:1b.0 to 64


===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.

The ALSA verion is 1.0.16
The modem cards detected by "aplay -l"  are:
placa 0: Intel [HDA Intel], dispositivo 6: Si3054 Modem [Si3054 Modem]

The /proc/asound/pcm file reports:
-----------------------
00-06: Si3054 Modem : Si3054 Modem : playback 1 : capture 1
00-04: ALC268 Analog : ALC268 Analog : capture 1
00-00: ALC268 Analog : ALC268 Analog : playback 1 : capture 1

about /proc/asound/cards:
------------------------
0 [Intel          ]: HDA-Intel - HDA Intel
                      HDA Intel at 0x96400000 irq 23

PCI slot 00:1b.0 has a High Definition Audio Card
The drivers are in the kernel modules tree at:
/lib/modules/2.6.24-19-generic/ubuntu/sound/alsa-driver/pci/hda/snd-hda-intel.ko
The modem codec file for the HDA card is: /proc/asound/card0/codec#1
--------------------------------------------------------
Codec: Motorola Si3054
Address: 1
Vendor Id: 0x10573055
Subsystem Id: 0x10573055
Revision Id: 0x100700
Modem Function Group: 0x1

The audio card hosts a softmodem chip:  0x10573055

The softmodem chip 0x10573055 is in principle supported by the COMM support of slmodemd
and the joint snd-hda-intel audio+modem driver, begun with ALSA version 1.0.13. 
For HDA cards with ALC883 chips, an upgrade to ALSA verions 1.0.15 way be necessary. Instructions for Upgrading snd-hda-intel and its dependent driver set are at:
http://linmodems.technion.ac.il/bigarch/archive-eighth/msg00838.html

If not a Conexant modem, the driver snd-hda-intel with its dependent drivers:
snd_hda_intel         344728  3
snd_pcm                78596  2 snd_hda_intel,snd_pcm_oss
snd_page_alloc         11400  2 snd_hda_intel,snd_pcm
snd_hwdep              10500  1 snd_hda_intel
snd                    56996  17 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_hwdep,snd_seq_dummy,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
----------
provide audio + modem support with the modem chip residing on the subsystem.
Any particular card can host any one of several soft modem chips.

=== Finished firmware and bootup diagnostics, next deducing cogent software. ===

Predictive  diagnostics for card in bus 00:1b.0:
   Modem chipset  detected on
NAME="Audio device: Intel Corporation 82801H "
CLASS=0403
PCIDEV=8086:284b
SUBSYS=10ec:0268
IRQ=23
HDA=8086:284b
SOFT=8086:284b.HDA
CHIP=0x10573055
IDENT=slmodemd
SLMODEMD_DEVICE=hw:0,6
Driver=snd-hda-intel

For candidate modem in:  00:1b.0
   0403 Audio device: Intel Corporation 82801H
      Primary device ID:  8086:284b
    Subsystem PCI_id  10ec:0268
    Softmodem codec or chipset from diagnostics: 0x10573055
                               from    Archives:
                        The HDA card softmodem chip is 0x10573055
     

Support type needed or chipset:   slmodemd supporting the snd-hda-intel audio+modem driver

An ALSA (Advanced Linux Sound Architecture) modem driver:  snd-hda-intel
provides Low Level support enabling contact with the modem hardware.
For all BUT Conexant chip soft modems (using hsfmodem software)
complementary High Level support is through a Smartlink utility:  slmodemd

Download from http://linmodems.technion.ac.il/packages/smartlink/
the package SLMODEMD.gcc4.2.tar.gz having a compiled slmodemd. Unpack under Linux with:
   $ tar zxf SLMODEMD.gcc4.2.tar.gz
and read instructions therein. But briefly, the modem is setup with command:
   sudo slmodemd -c YOUR_COUNTRY --alsa hw:0,6
reporting dynamic creation of ports:
   /dev/ttySL0 --> /dev/pts/N   , with N some number
Read DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow through guidance.

----------------end Softmodem section --------------

Writing DOCs/Intel.txt
Writing DOCs/Smartlink.txt
============ end Smartlink section =====================

Completed candidate modem analyses.

The base of the UDEV device file system is: /dev/.udev

Versions adequately match for the compiler installed: 4.2.3
             and the compiler used in kernel assembly: 4.2.3



Minimal compiling resources appear complete:
   make utility - /usr/bin/make
   Compiler version 4.2
   linuc_headers base folder /lib/modules/2.6.24-19-generic/build

However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed in  /usr/include/ .
For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default.
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.




If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$  apt-get update
$  apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb


Checking pppd properties:
   -rwsr-xr-- 1 root dip 269256 2007-10-04 16:57 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
    http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
   $ su - root  (not for Ubuntu)
        sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
   sudo chmod a+x /usr/sbin/pppd

Checking settings of:   /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx

In case of a message like:
   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html

Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 wlan0 wmaster0
Which can interfere with Browser naviagation.

Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================

# start/stop the daemon when the USB modem is connected
KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon"
Checking for modem support lines:
--------------------------------------
     /device/modem symbolic link:   lrwxrwxrwx 1 root root 6 2008-10-30 11:13 /dev/modem -> ttySL0
slmodemd created symbolic link /dev/ttySL0: 
     Within /etc/udev/ files:
/etc/udev/rules.d/030_sl-modem-daemon.rules:# start/stop the daemon when the USB modem is connected
/etc/udev/rules.d/030_sl-modem-daemon.rules:KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon"
/etc/udev/sl-modem-daemon.rules:# start/stop the daemon when the USB modem is connected
/etc/udev/sl-modem-daemon.rules:KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon"
     Within /etc/modprobe.conf files:
/etc/modprobe.d/sl-modem-daemon.modutils:install slamr modprobe --ignore-install ungrab-winmodem ;  modprobe --ignore-install slamr; test -e /dev/slamr0 || (/bin/mknod -m 660 /dev/slamr0 c 242 0 2>/dev/null && chgrp dialout /dev/slamr0)
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
     Within any ancient /etc/devfs files:

     Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------

Agradeço desde já a ajuda de vcs!

[Raphaell Borralho]

Bom gente... tentei instalar alguns modens que vi em vários tutoriais...+ ainda nao consegui...

Alguém pode me ajudar?