hp psc 1210 identificada, mas não instala segue o erro

[catitao]

Probe for USB-connected devices ([y]/n)?  y

Probing "/dev/usb/lp0"...
   *** Found "psc 1200 series" but failed to communicate with it!
   *** Elapsed time for this attempt was 0 second(s).
   *** Check syslog file for ptal-mlcd error messages.
   *** See hpoj documentation for troubleshooting information.

Probing "%005%001"...
   No device found.

Probing "%004%001"...
   No device found.

Probing "%003%001"...
   No device found.

Probing "%002%001"...
   No device found.

Probing "%001%002"...
   No device found.

Probing "%001%001"...
   No device found.

----------------------------------------------------------------------

Press <Enter> alone to continue, or if you would like to add a
JetDirect-connected device, then enter its dotted-decimal
IP address or hostname here --->

----------------------------------------------------------------------

Done updating device configuration files stored under /etc/ptal.
If you make manual changes to those files, then be sure to run
"/etc/init.d/hpoj start" so they will take effect.

----------------------------------------------------------------------

Starting the HP OfficeJet Linux driver.
   No hpoj devices have been configured.
   As root, run "/etc/init.d/hpoj setup".

[dealer]

Aqui funcionou, com a ferramente de impressoras do GNOME, mais ele usa o driver do hpijs =]

[catitao]

ja funcionou precisava só reiniciar obrigado