[Problemas] Intel 945 no Toshiba Satellite Laptop A135-S4467 Duo 2 Core

[Scarface]

Pessoal tentei jogar Counter Strike pelo Ubuntu e nao estou conseguindo.
Busquei no Google e naoa chei uma pessoa que tive o mesmo Toshiba que eu para poder trocar ideia.
O Counter Strike ja esta Instaldo no Laptop. fiz pelo Wine-doors
Pare esta tudo certo so que ao eu clicar para escolher o servidor ele some fecha sozinho..

Tenho um Laptop Toshiba Satellite Duo 2 Core
Placa de Video Intel 954

Aqui esta a minha configuracao..

Please alguem me ajuda.

scarface@scarface-laptop:~$ dmesg
[    0.000000] Linux version 2.6.20-16-generic (root@terranova) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Sep 23 19:50:39 UTC 2007 (Ubuntu 2.6.20-16.32-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] sanitize start
[    0.000000] sanitize end
[    0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f800 end: 000000000009f800 type: 1
[    0.000000] copy_e820_map() type is E820_RAM
[    0.000000] copy_e820_map() start: 000000000009f800 size: 0000000000000800 end: 00000000000a0000 type: 2
[    0.000000] copy_e820_map() start: 00000000000dc000 size: 0000000000024000 end: 0000000000100000 type: 2
[    0.000000] copy_e820_map() start: 0000000000100000 size: 000000003f580000 end: 000000003f680000 type: 1
[    0.000000] copy_e820_map() type is E820_RAM
[    0.000000] copy_e820_map() start: 000000003f680000 size: 0000000000080000 end: 000000003f700000 type: 4
[    0.000000] copy_e820_map() start: 000000003f700000 size: 0000000000900000 end: 0000000040000000 type: 2
[    0.000000] copy_e820_map() start: 00000000e0000000 size: 0000000010000000 end: 00000000f0000000 type: 2
[    0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2
[    0.000000] copy_e820_map() start: 00000000fed00000 size: 0000000000000400 end: 00000000fed00400 type: 2
[    0.000000] copy_e820_map() start: 00000000fed14000 size: 0000000000006000 end: 00000000fed1a000 type: 2
[    0.000000] copy_e820_map() start: 00000000fed1c000 size: 0000000000074000 end: 00000000fed90000 type: 2
[    0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
[    0.000000] copy_e820_map() start: 00000000ff000000 size: 0000000001000000 end: 0000000100000000 type: 2
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003f680000 (usable)
[    0.000000]  BIOS-e820: 000000003f680000 - 000000003f700000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003f700000 - 0000000040000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[    0.000000]  BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000] 118MB HIGHMEM available.
[    0.000000] 896MB LOWMEM available.
[    0.000000] found SMP MP-table at 000f7670
[    0.000000] Entering add_active_range(0, 0, 259712) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   229376
[    0.000000]   HighMem    229376 ->   259712
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   259712
[    0.000000] On node 0 totalpages: 259712
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 1760 pages used for memmap
[    0.000000]   Normal zone: 223520 pages, LIFO batch:31
[    0.000000]   HighMem zone: 237 pages used for memmap
[    0.000000]   HighMem zone: 30099 pages, LIFO batch:7
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP (v000 TOSCPL                                ) @ 0x000f75e0
[    0.000000] ACPI: RSDT (v001 TOSCPL TOSCPL00 0x06040000  LTP 0x00000000) @ 0x3f6888c2
[    0.000000] ACPI: FADT (v001 TOSCPL CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x3f690c78
[    0.000000] ACPI: SLIC (v001 TOSCPL TOSCPL00 0x06040000 LOHR 0x00000000) @ 0x3f690cec
[    0.000000] ACPI: MADT (v001 INTEL  CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x3f690e62
[    0.000000] ACPI: HPET (v001 INTEL  CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x3f690eca
[    0.000000] ACPI: MCFG (v001 INTEL  CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x3f690f02
[    0.000000] ACPI: BOOT (v001 PTLTD  $SBFTBL$ 0x06040000  LTP 0x00000001) @ 0x3f690fd8
[    0.000000] ACPI: MADT (v001 PTLTD    APIC   0x06040000  LTP 0x00000000) @ 0x3f690f70
[    0.000000] ACPI: SSDT (v001 SataRe  SataPri 0x00001000 INTL 0x20050624) @ 0x3f689fda
[    0.000000] ACPI: SSDT (v001 SataRe  SataSec 0x00001000 INTL 0x20050624) @ 0x3f689948
[    0.000000] ACPI: SSDT (v001  PmRef  Cpu0Tst 0x00003000 INTL 0x20050624) @ 0x3f688ea2
[    0.000000] ACPI: SSDT (v001  PmRef  Cpu1Tst 0x00003000 INTL 0x20050624) @ 0x3f688dfc
[    0.000000] ACPI: SSDT (v001  PmRef    CpuPm 0x00003000 INTL 0x20050624) @ 0x3f688916
[    0.000000] ACPI: DSDT (v001 TOSCPL CALISTGA 0x06040000 INTL 0x20060608) @ 0x00000000
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: 2 duplicate APIC table ignored.
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 6:15 APIC version 20
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] Processor #1 6:15 APIC version 20
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
[    0.000000] Detected 1596.123 MHz processor.
[   20.592954] Built 1 zonelists.  Total pages: 257683
[   20.592959] Kernel command line: root=UUID=50f5f162-e26d-4395-abb6-da95f8aa017c ro quiet splash
[   20.593111] mapped APIC to ffffd000 (fee00000)
[   20.593114] mapped IOAPIC to ffffc000 (fec00000)
[   20.593118] Enabling fast FPU save and restore... done.
[   20.593121] Enabling unmasked SIMD FPU exception support... done.
[   20.593129] Initializing CPU#0
[   20.593204] PID hash table entries: 4096 (order: 12, 16384 bytes)
[   20.594952] Console: colour VGA+ 80x25
[   20.595287] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[   20.595618] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[   20.621484] Memory: 1018392k/1038848k available (1993k kernel code, 19660k reserved, 900k data, 328k init, 121344k highmem)
[   20.621493] virtual kernel memory layout:
[   20.621494]     fixmap  : 0xfff4e000 - 0xfffff000   ( 708 kB)
[   20.621495]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   20.621496]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[   20.621497]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[   20.621499]       .init : 0xc03d9000 - 0xc042b000   ( 328 kB)
[   20.621500]       .data : 0xc02f2429 - 0xc03d36d4   ( 900 kB)
[   20.621501]       .text : 0xc0100000 - 0xc02f2429   (1993 kB)
[   20.621504] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   20.621672] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[   20.621678] hpet0: 3 64-bit timers, 14318180 Hz
[   20.622684] Using HPET for base-timer
[   20.701602] Calibrating delay using timer specific routine.. 3195.76 BogoMIPS (lpj=6391539)
[   20.701642] Security Framework v1.0.0 initialized
[   20.701647] SELinux:  Disabled at boot.
[   20.701661] Mount-cache hash table entries: 512
[   20.701788] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e39d 00000000 00000001
[   20.701796] monitor/mwait feature present.
[   20.701798] using mwait in idle threads.
[   20.701802] CPU: L1 I cache: 32K, L1 D cache: 32K
[   20.701804] CPU: L2 cache: 2048K
[   20.701807] CPU: Physical Processor ID: 0
[   20.701809] CPU: Processor Core ID: 0
[   20.701811] CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e39d 00000000 00000001
[   20.701821] Compat vDSO mapped to ffffe000.
[   20.701824] Remapping vsyscall page to ffffe000
[   20.701835] Checking 'hlt' instruction... OK.
[   20.717687] SMP alternatives: switching to UP code
[   20.718034] Early unpacking initramfs... done
[   21.060934] ACPI: Core revision 20060707
[   21.061239] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[   21.098280] CPU0: Intel(R) Core(TM)2 CPU         T5200  @ 1.60GHz stepping 06
[   21.098301] SMP alternatives: switching to SMP code
[   21.098390] Booting processor 1/1 eip 3000
[   21.108820] Initializing CPU#1
[   21.189142] Calibrating delay using timer specific routine.. 3192.09 BogoMIPS (lpj=6384180)
[   21.189149] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e39d 00000000 00000001
[   21.189154] monitor/mwait feature present.
[   21.189157] CPU: L1 I cache: 32K, L1 D cache: 32K
[   21.189159] CPU: L2 cache: 2048K
[   21.189161] CPU: Physical Processor ID: 0
[   21.189163] CPU: Processor Core ID: 1
[   21.189164] CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e39d 00000000 00000001
[   21.189651] CPU1: Intel(R) Core(TM)2 CPU         T5200  @ 1.60GHz stepping 06
[   21.189674] Total of 2 processors activated (6387.85 BogoMIPS).
[   21.189874] ENABLING IO-APIC IRQs
[   21.190080] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   21.337002] checking TSC synchronization across 2 CPUs: passed.
[    0.003999] Brought up 2 CPUs
[    0.184779] migration_cost=50
[    0.185059] Booting paravirtualized kernel on bare hardware
[    0.185162] Time:  2:28:27  Date: 09/14/107
[    0.185192] NET: Registered protocol family 16
[    0.185278] EISA bus registered
[    0.185286] ACPI: bus type pci registered
[    0.185412] PCI: BIOS BUG #81[49435000] found
[    0.185470] PCI: Using configuration type 1
[    0.185471] Setting up standard PCI resources
[    0.198335] ACPI: Interpreter enabled
[    0.198337] ACPI: Using IOAPIC for interrupt routing
[    0.198839] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.198845] PCI: Probing PCI hardware (bus 00)
[    0.199656] Boot video device is 0000:00:02.0
[    0.200368] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[    0.200373] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[    0.201577] PCI: Transparent bridge - 0000:00:1e.0
[    0.201656] PCI: Bus #07 (-#0a) is hidden behind transparent bridge #06 (-#06) (try 'pci=assign-busses')
[    0.201659] Please report the result to linux-kernel to fix this permanently
[    0.201731] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.209609] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.209874] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    0.210235] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[    0.211124] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[    0.211821] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.212086] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.212343] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.212600] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.212857] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.213112] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.213368] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.213625] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.260523] Linux Plug and Play Support v0.97 (c) Adam Belay
[    0.260533] pnp: PnP ACPI init
[    0.287912] pnp: PnP ACPI: found 10 devices
[    0.287916] PnPBIOS: Disabled by ACPI PNP
[    0.287958] PCI: Using ACPI for IRQ routing
[    0.287961] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[    0.288081] NET: Registered protocol family 8
[    0.288083] NET: Registered protocol family 20
[    0.288320] pnp: 00:01: ioport range 0xfe00-0xfe7f has been reserved
[    0.288323] pnp: 00:01: ioport range 0xfe80-0xfeff has been reserved
[    0.288329] pnp: 00:01: ioport range 0xff00-0xff7f has been reserved
[    0.288627] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
[    0.288633] PCI: Bridge: 0000:00:1c.0
[    0.288637]   IO window: 2000-2fff
[    0.288643]   MEM window: d6000000-d7ffffff
[    0.288648]   PREFETCH window: d0000000-d1ffffff
[    0.288656] PCI: Bridge: 0000:00:1c.1
[    0.288659]   IO window: 3000-3fff
[    0.288666]   MEM window: d8000000-d9ffffff
[    0.288671]   PREFETCH window: d2000000-d3ffffff
[    0.288678] PCI: Bridge: 0000:00:1c.2
[    0.288681]   IO window: 4000-4fff
[    0.288687]   MEM window: da000000-dbffffff
[    0.288692]   PREFETCH window: d4000000-d5ffffff
[    0.288705] PCI: Bus 7, cardbus bridge: 0000:06:04.0
[    0.288708]   IO window: 00005000-000050ff
[    0.288713]   IO window: 00005400-000054ff
[    0.288718]   PREFETCH window: 50000000-53ffffff
[    0.288724]   MEM window: 54000000-57ffffff
[    0.288728] PCI: Bridge: 0000:00:1e.0
[    0.288732]   IO window: 5000-5fff
[    0.288738]   MEM window: dc000000-dc0fffff
[    0.288743]   PREFETCH window: 50000000-53ffffff
[    0.288774] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16
[    0.288782] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[    0.288808] ACPI: PCI Interrupt 0000:00:1c.1 -> GSI 16 (level, low) -> IRQ 17
[    0.288815] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[    0.288840] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[    0.288847] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[    0.288862] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[    0.288879] ACPI: PCI Interrupt 0000:06:04.0[A] -> GSI 16 (level, low) -> IRQ 17
[    0.288912] NET: Registered protocol family 2
[    0.335732] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.335840] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.336357] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.336640] TCP: Hash tables configured (established 131072 bind 65536)
[    0.336642] TCP reno registered
[    0.351799] checking if image is initramfs... it is
[    1.026209] Freeing initrd memory: 7003k freed
[    1.026416] Simple Boot Flag at 0x36 set to 0x1
[    1.026926] audit: initializing netlink socket (disabled)
[    1.026942] audit(1192328907.784:1): initialized
[    1.027064] highmem bounce pool size: 64 pages
[    1.027155] VFS: Disk quotas dquot_6.5.1
[    1.027173] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.027222] io scheduler noop registered
[    1.027225] io scheduler anticipatory registered
[    1.027227] io scheduler deadline registered
[    1.027240] io scheduler cfq registered (default)
[    1.027499] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[    1.027563] assign_interrupt_mode Found MSI capability
[    1.027566] Allocate Port Service[0000:00:1c.0:pcie00]
[    1.027602] Allocate Port Service[0000:00:1c.0:pcie02]
[    1.027739] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[    1.027802] assign_interrupt_mode Found MSI capability
[    1.027804] Allocate Port Service[0000:00:1c.1:pcie00]
[    1.027842] Allocate Port Service[0000:00:1c.1:pcie02]
[    1.027974] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[    1.028036] assign_interrupt_mode Found MSI capability
[    1.028039] Allocate Port Service[0000:00:1c.2:pcie00]
[    1.028072] Allocate Port Service[0000:00:1c.2:pcie02]
[    1.028270] isapnp: Scanning for PnP cards...
[    1.381889] isapnp: No Plug & Play device found
[    1.404813] Real Time Clock Driver v1.12ac
[    1.404874] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[    1.405542] mice: PS/2 mouse device common for all mice
[    1.406165] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[    1.406326] input: Macintosh mouse button emulation as /class/input/input0
[    1.406365] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2

[Scarface]

[    1.406369] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[    1.406684] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.407013] i8042.c: Detected active multiplexing controller, rev 1.1.
[    1.407092] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.407095] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.407098] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.407100] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.407102] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.407239] EISA: Probing bus 0 at eisa.0
[    1.407248] Cannot allocate resource for EISA slot 1
[    1.407251] Cannot allocate resource for EISA slot 2
[    1.407253] Cannot allocate resource for EISA slot 3
[    1.407255] Cannot allocate resource for EISA slot 4
[    1.407258] Cannot allocate resource for EISA slot 5
[    1.407272] EISA: Detected 0 cards.
[    1.430693] input: AT Translated Set 2 keyboard as /class/input/input1
[    1.437348] TCP cubic registered
[    1.437356] NET: Registered protocol family 1
[    1.437380] Starting balanced_irq
[    1.437387] Using IPI No-Shortcut mode
[    1.437455] ACPI: (supports S0 S3 S4 S5)
[    1.437507]   Magic number: 11:211:460
[    1.437808] Freeing unused kernel memory: 328k freed
[    1.438656] Time: tsc clocksource has been installed.
[    2.660135] Capability LSM initialized
[    2.697566] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Ist] [20060707]
[    2.697820] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Cst] [20060707]
[    2.698189] Monitor-Mwait will be used to enter C-1 state
[    2.698192] Monitor-Mwait will be used to enter C-2 state
[    2.698195] Monitor-Mwait will be used to enter C-3 state
[    2.698201] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[    2.698720] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707]
[    2.698930] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Cst] [20060707]
[    2.699368] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[    3.356000] Time: hpet clocksource has been installed.
[    3.628000] usbcore: registered new interface driver usbfs
[    3.628000] usbcore: registered new interface driver hub
[    3.628000] usbcore: registered new device driver usb
[    3.628000] USB Universal Host Controller Interface driver v3.0
[    3.628000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
[    3.628000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[    3.628000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    3.628000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    3.628000] uhci_hcd 0000:00:1d.0: irq 19, io base 0x00001820
[    3.628000] usb usb1: configuration #1 chosen from 1 choice
[    3.628000] hub 1-0:1.0: USB hub found
[    3.628000] hub 1-0:1.0: 2 ports detected
[    3.644000] SCSI subsystem initialized
[    3.648000] libata version 2.20 loaded.
[    3.732000] ACPI: PCI Interrupt 0000:00:1d.1 -> GSI 19 (level, low) -> IRQ 20
[    3.732000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[    3.732000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    3.732000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[    3.732000] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001840
[    3.732000] usb usb2: configuration #1 chosen from 1 choice
[    3.732000] hub 2-0:1.0: USB hub found
[    3.732000] hub 2-0:1.0: 2 ports detected
[    3.756000] ieee1394: Initialized config rom entry `ip1394'
[    3.836000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[    3.836000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[    3.836000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    3.836000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[    3.836000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[    3.836000] usb usb3: configuration #1 chosen from 1 choice
[    3.836000] hub 3-0:1.0: USB hub found
[    3.836000] hub 3-0:1.0: 2 ports detected
[    3.940000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 17
[    3.940000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[    3.940000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    3.940000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[    3.940000] uhci_hcd 0000:00:1d.3: irq 17, io base 0x00001880
[    3.940000] usb usb4: configuration #1 chosen from 1 choice
[    3.940000] hub 4-0:1.0: USB hub found
[    3.940000] hub 4-0:1.0: 2 ports detected
[    4.044000] ata_piix 0000:00:1f.2: version 2.10ac1
[    4.044000] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[    4.200000] ACPI: PCI Interrupt 0000:00:1f.2 -> GSI 19 (level, low) -> IRQ 20
[    4.200000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[    4.200000] ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000118b0 irq 14
[    4.200000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x000118b8 irq 15
[    4.200000] scsi0 : ata_piix
[    4.364000] ata1.00: ata_hpa_resize 1: sectors = 312581808, hpa_sectors = 312581808
[    4.364000] ata1.00: ATA-7: Hitachi HTS541616J9SA00, SB4OC70P, max UDMA/100
[    4.364000] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    4.372000] ata1.00: ata_hpa_resize 1: sectors = 312581808, hpa_sectors = 312581808
[    4.372000] ata1.00: configured for UDMA/100
[    4.372000] scsi1 : ata_piix
[    4.708000] ata2.00: ATAPI, max UDMA/33
[    4.888000] ata2.00: configured for UDMA/33
[    4.888000] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54161 SB4O PQ: 0 ANSI: 5
[    4.896000] scsi 1:0:0:0: CD-ROM            PIONEER  DVD-RW  DVR-K17A 1.50 PQ: 0 ANSI: 5
[    4.896000] r8169 Gigabit Ethernet driver 2.2LK loaded
[    4.896000] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[    4.900000] PCI: Setting latency timer of device 0000:05:00.0 to 64
[    4.900000] eth0: RTL8101e at 0xf883e000, 00:16:d4:8d:b8:2c, IRQ 18
[    4.908000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
[    4.908000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[    4.908000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    4.908000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[    4.908000] ehci_hcd 0000:00:1d.7: debug port 1
[    4.908000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[    4.908000] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xdc444000
[    4.912000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    4.912000] usb usb5: configuration #1 chosen from 1 choice
[    4.912000] hub 5-0:1.0: USB hub found
[    4.912000] hub 5-0:1.0: 8 ports detected
[    5.016000] ACPI: PCI Interrupt 0000:06:04.1 -> GSI 17 (level, low) -> IRQ 16
[    5.064000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16]  MMIO=[dc005000-dc0057ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[    5.080000] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
[    5.080000] sda: Write Protect is off
[    5.080000] sda: Mode Sense: 00 3a 00 00
[    5.080000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.084000] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
[    5.084000] sda: Write Protect is off
[    5.084000] sda: Mode Sense: 00 3a 00 00
[    5.084000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.084000]  sda: sda1 sda2 sda3 sda4 < sda5 >
[    5.128000] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    5.128000] Uniform CD-ROM driver Revision: 3.20
[    5.128000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    5.132000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    5.132000] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    5.132000] sd 0:0:0:0: Attached scsi disk sda
[    5.380000] Attempting manual resume
[    5.380000] swsusp: Resume From Partition 8:5
[    5.380000] PM: Checking swsusp image.
[    5.380000] PM: Resume from disk failed.
[    5.416000] kjournald starting.  Commit interval 5 seconds
[    5.416000] EXT3-fs: mounted filesystem with ordered data mode.
[   15.680000] Linux agpgart interface v0.102 (c) Dave Jones
[   15.696000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   15.696000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   15.804000] iTCO_vendor_support: vendor-support=0
[   15.852000] ACPI: PCI Interrupt 0000:06:04.2[C] -> GSI 18 (level, low) -> IRQ 18
[   15.872000] Yenta: CardBus bridge found at 0000:06:04.0 [1179:ff00]
[   15.872000] Yenta: Enabling burst memory read transactions
[   15.872000] Yenta: Using CSCINT to route CSC interrupts to PCI
[   15.872000] Yenta: Routing CardBus interrupts to PCI
[   15.872000] Yenta TI: socket 0000:06:04.0, mfunc 0x10aa1b22, devctl 0x64
[   15.892000] agpgart: Detected an Intel 945GM Chipset.
[   15.892000] agpgart: Detected 7932K stolen memory.
[   15.908000] agpgart: AGP aperture is 256M @ 0xc0000000
[   15.976000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[   16.044000] sdhci: Secure Digital Host Controller Interface driver
[   16.044000] sdhci: Copyright(c) Pierre Ossman
[   16.076000] ieee80211_crypt: registered algorithm 'NULL'
[   16.076000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[   16.076000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[   16.104000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 17
[   16.104000] Socket status: 30000006
[   16.104000] Yenta: Raising subordinate bus# of parent bus (#06) from #06 to #0a
[   16.104000] pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
[   16.104000] cs: IO port probe 0x5000-0x5fff: clean.
[   16.104000] pcmcia: parent PCI bridge Memory window: 0xdc000000 - 0xdc0fffff
[   16.104000] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
[   16.104000] sdhci: SDHCI controller found at 0000:06:04.3 [104c:803c] (rev 0)
[   16.104000] ACPI: PCI Interrupt 0000:06:04.3[D] -> GSI 19 (level, low) -> IRQ 20
[   16.104000] mmc0: SDHCI at 0xdc005800 irq 20 DMA
[   16.180000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.0mp
[   16.180000] ipw3945: Copyright(c) 2003-2006 Intel Corporation
[   16.184000] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 16
[   16.184000] PCI: Setting latency timer of device 0000:04:00.0 to 64
[   16.184000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[   16.348000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21
[   16.348000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[   16.352000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x0
[   16.352000] synaptics: Toshiba Satellite A135 detected, limiting rate to 40pps.
[   16.384000] input: SynPS/2 Synaptics TouchPad as /class/input/input2
[   16.388000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
[   16.388000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   16.420000] intel_rng: FWH not detected
[   16.472000] cs: IO port probe 0x100-0x3af: clean.
[   16.472000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[   16.476000] cs: IO port probe 0x820-0x8ff: clean.
[   16.476000] cs: IO port probe 0xc00-0xcf7: clean.
[   16.476000] cs: IO port probe 0xa00-0xaff: clean.
[   17.272000] si3054: cannot initialize. EXT MID = 0000
[   17.436000] fuse init (API version 7.
[   17.536000] lp: driver loaded but no devices found
[   17.628000] Adding 1983988k swap on /dev/disk/by-uuid/55c86054-b830-4f21-bb5c-8c8a5d1f1cc0.  Priority:-1 extents:1 across:1983988k

[   17.752000] EXT3 FS on sda3, internal journal
[   18.056000] ipw3945: Detected geography ABG (11 802.11bg channels, 13 802.11a channels)
[   19.392000] NET: Registered protocol family 17
[   60.644000] NET: Registered protocol family 10
[   60.644000] lo: Disabled Privacy Extensions
[   60.644000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   65.988000] input: Power Button (FF) as /class/input/input3
[   65.988000] ACPI: Power Button (FF) [PWRF]
[   65.988000] input: Lid Switch as /class/input/input4
[   65.988000] ACPI: Lid Switch [liD0]
[   65.988000] input: Power Button (CM) as /class/input/input5
[   65.988000] ACPI: Power Button (CM) [PWRB]
[   66.040000] ibm_acpi: ec object not found
[   66.076000] Using specific hotkey driver
[   66.196000] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   66.196000] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   66.276000] ACPI: Battery Slot [BAT1] (battery present)
[   66.284000] ACPI: AC Adapter [ACAD] (on-line)
[   66.296000] No dock devices found.
[   66.368000] pcc_acpi: loading...
[   68.100000] r8169: eth0: link down
[   68.100000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   70.116000] [drm] Initialized drm 1.1.0 20060810
[   70.120000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 17
[   70.120000] [drm] Initialized i915 1.6.0 20060119 on minor 0
[   71.328000] ppdev: user-space parallel port driver
[   75.156000] apm: BIOS not found.
[   77.276000] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   77.384000] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[   77.400000] NFSD: starting 90-second grace period
[   78.284000] device eth0 entered promiscuous mode
[   78.284000] audit(1192354184.801:2): dev=eth0 prom=256 old_prom=0 auid=4294967295
[   81.964000] Bluetooth: Core ver 2.11
[   81.964000] NET: Registered protocol family 31
[   81.964000] Bluetooth: HCI device and connection manager initialized
[   81.964000] Bluetooth: HCI socket layer initialized
[   82.032000] Bluetooth: L2CAP ver 2.8
[   82.032000] Bluetooth: L2CAP socket layer initialized
[   82.152000] Bluetooth: RFCOMM socket layer initialized
[   82.152000] Bluetooth: RFCOMM TTY layer initialized
[   82.152000] Bluetooth: RFCOMM ver 1.8
[  206.348000] device eth0 left promiscuous mode
[  206.348000] audit(1192354312.892:3): dev=eth0 prom=0 old_prom=256 auid=4294967295
[  206.360000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[  206.440000] r8169: eth0: link down
[  206.440000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  283.816000] ieee80211_crypt: registered algorithm 'WEP'
[  283.868000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[  294.580000] eth1: no IPv6 routers present
[  487.052000] eth1: no IPv6 routers present
[  568.400000] r8169: eth0: link down
[  568.400000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  579.308000] eth1: no IPv6 routers present
[  599.032000] device eth0 entered promiscuous mode
[  599.032000] audit(1192354705.561:4): dev=eth0 prom=256 old_prom=0 auid=4294967295
[  599.240000] r8169: eth0: link down
[  599.240000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  599.440000] device eth0 left promiscuous mode
[  599.440000] audit(1192354705.969:5): dev=eth0 prom=0 old_prom=256 auid=4294967295
[  609.296000] ipw3945: Radio Frequency Kill Switch is On:
[  609.296000] Kill switch must be turned off for wireless networking to work.
[  611.168000] ipw3945: Detected geography ABG (11 802.11bg channels, 13 802.11a channels)
[  665.044000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[  665.056000] r8169: eth0: link down
[  665.056000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  754.656000] r8169: eth0: link down
[  754.656000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  763.064000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[  767.764000] r8169: eth0: link down
[  767.764000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  773.392000] eth1: no IPv6 routers present
[ 1528.940000] ISO 9660 Extensions: Microsoft Joliet Level 1
[ 1529.080000] ISOFS: changing to secondary root
scarface@scarface-laptop:~$
scarface@scarface-laptop:~$