PixelView PlayTV Pro Ultra

jpnucci · 06 de Outubro de 2007, 15:52

Caro mstr,
Muito obrigado pela atenção.
Segui seu roteiro, passo a passo.
Se eu chamo apenas o tvtime, diz que não há sinal. Se eu chamo pelo video1, ele puxa a webcam...
E eu estou com a TV a cabo conectada na placa...
JP

mstr · 06 de Outubro de 2007, 16:53

posta o resultado desses comandos digitados no terminal
dmesg | grep cx88
dmesg | grep tuner
lsmod | grep cx88

para setar a tv a cabo ou a tv normal no tvtime vc tem que entrar em:

gestão de canais -> alterar a tabela de frequencias e escolher a que vc quiser

jpnucci · 06 de Outubro de 2007, 17:09

Lá vai:

jpnucci@jpnucci:~$ dmesg | grep cx88
[ 43.072335] CORE cx88[0]: subsystem: 0000:0000, board: PixelView PlayTV Ultra Pro (Stereo) [card=27,insmod option]
[ 43.314205] cx88[0]: i2c scan: found device @ 0xc2 [tuner (analog/dvb)]
[ 43.314839] cx88[0]: i2c scan: found device @ 0xc6 [

]
[ 43.329532] input: cx88 IR (PixelView PlayTV Ultra as /class/input/input5
[ 43.329583] cx88[0]/0: found at 0000:01:02.0, rev: 5, irq: 21, latency: 64, mmio: 0xfd000000
[ 43.349766] tuner 0-0061: chip found @ 0xc2 (cx88[0])
[ 43.350424] tuner 0-0063: chip found @ 0xc6 (cx88[0])
[ 43.356791] cx88[0]/0: registered device video0 [v4l2]
[ 43.356827] cx88[0]/0: registered device vbi0
[ 43.356864] cx88[0]/0: registered device radio0
jpnucci@jpnucci:~$ dmesg | grep tuner
[ 43.072339] TV tuner 38 at 0x1fe, Radio tuner 1 at 0x1fe
[ 43.314205] cx88[0]: i2c scan: found device @ 0xc2 [tuner (analog/dvb)]
[ 43.349766] tuner 0-0061: chip found @ 0xc2 (cx88[0])
[ 43.349793] tuner 0-0061: type set to 1 (Philips PAL_I (FI1246 and compatibles))
[ 43.349797] tuner 0-0061: type set to 1 (Philips PAL_I (FI1246 and compatibles))
[ 43.350424] tuner 0-0063: chip found @ 0xc6 (cx88[0])
jpnucci@jpnucci:~$ lsmod | grep cx88
cx8800 34944 0
cx88xx 68132 1 cx8800
ir_common 35460 1 cx88xx
i2c_algo_bit 7428 1 cx88xx
video_buf 26244 2 cx8800,cx88xx
tveeprom 16784 1 cx88xx
i2c_core 26112 4 tuner,cx88xx,i2c_algo_bit,tveeprom
videodev 29312 3 gspca,cx8800,cx88xx
compat_ioctl32 2304 1 cx8800
btcx_risc 5896 2 cx8800,cx88xx
v4l2_common 18432 4 tuner,cx8800,cx88xx,videodev

mstr · 06 de Outubro de 2007, 17:38

ta certo, e ta no /dev/video0 e dando conflito com sua webcam

tira webcam do computador que deve ser usb

reinicia

e tenta no tvtime que deve funcionar

apenas chamando tvtime

posta o arquivo /etc/modprobe.d/captura, vamos ver pq não esta direcionando para o /dev/video1

posta a saida de lspci -nn

jpnucci · 06 de Outubro de 2007, 21:55

Agradeço mais uma vez o esforço, amigo. É por esse tipo de coisa que eu estou migrando de vez para o Ubuntu, embora enfrente algumas dificuldades como essa.
Vamos lá: tirei a webcam e reinicei. Chamei tvtime. Ele continua dizendo que está sem sinal. E mexi na gestão de canais, ele não se modifica qualquer que seja a opção que eu coloque.

O arquivo /etc/modprobe.d/captura:
# cx88xx módulos
# quando inicializar o modulo cx88xx usa estas opções
# usar o /dev/video1, liberando o /dev/video0 para a webcam
alias /dev/video1 cx8800

# radio=1 para ativar o radio
options cx88xx card=27 tuner=38 radio=1 i2c_scan=1

O lspci -nn:

jpnucci@jpnucci:~$ lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface [8086:2570] (rev 02)
00:02.0 VGA compatible controller [0300]: Intel Corporation 82865G Integrated Graphics Controller [8086:2572] (rev 02)
00:1d.0 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 [8086:24d2] (rev 02)
00:1d.1 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 [8086:24d4] (rev 02)
00:1d.3 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 [8086:24de] (rev 02)
00:1d.7 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller [8086:24dd] (rev 02)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev c2)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge [8086:24d0] (rev 02)
00:1f.1 IDE interface [0101]: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller [8086:24db] (rev 02)
00:1f.3 SMBus [0c05]: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller [8086:24d3] (rev 02)
00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller [8086:24d5] (rev 02)
01:01.0 Multimedia audio controller [0401]: Creative Labs SB Audigy LS [1102:0007]
01:02.0 Multimedia video controller [0400]: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [14f1:8800] (rev 05)
01:08.0 Ethernet controller [0200]: Intel Corporation 82562EZ 10/100 Ethernet Controller [8086:1050] (rev 02)

jomafras · 06 de Outubro de 2007, 22:09

Eu estou achando incrível isso que tá acontecendo.

A minha placa de captura, que é igual a sua, eu configuro duma maneira tão simples que não dá pra entender, como a sua não funciona.

Veja, o que eu faço, desde o Ubuntu 6.10 :

Código Selecionar

sudo gedit /etc/modprobe.d/options

Aí eu adiciono :

# Placa de Captura
options cx88xx card=27 tuner=38

Não estou brincando, é só isso.

Não dá pra entender, mesmo.

mstr · 07 de Outubro de 2007, 00:57

pintinho,

digita no terminal
lspci -nn
e veja se é igual
01:02.0 Multimedia video controller [0400]: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [14f1:8800] (rev 05)
principalmente [14f1:8800]

jpnucci,
me lembrei que ja tinha visto esse codigo [14f1:8800],

o nome desta placa é Powercolor Real Angel 330

tem la na pagina mas parece que o card dela esta errado

e tem que instalar o tuner la explica como

detalhes do codigo [14f1:8800]

Vendor Details
Conexant Systems, Inc.

Vendor Id: 0x14F1
Short Name: Conexant
Contact:
Web Site: Found in a Dell Dimension 4800 desktop
Notes: PCI Simple Communications Controller

Produto
0x8800
Chip Number:    23880
Chip Description:    Conexant 23880 Video Capture (NTSC)
Notes:    Found on Hauppauge PCI TV Tuner Card with Remote Control (distributed by CompUSA)

jpnucci · 07 de Outubro de 2007, 02:46

Grande descoberta.
Segui o roteiro da sua página, mstr, mas novamente não funcionou.
Tentei isso daqui, mas nem consegui chegar no final: http://www.linuxtv.org/v4lwiki/index.php/Cx88_devices_(cx2388x)#Powercolor
O que você sugere? Desisto da placa? A essa altura, estou começando a achar que é a melhor opção...

mstr · 07 de Outubro de 2007, 12:42

se vc desistir nunca vai fazer ela funcionar

eu peguei essas coisas do topico de quem esta fazendo o firmware

mas ele não especifica a card e ai que começa o nosso problema

vamos tentar novamente verificar como esta sendo chamada

posta o resultado desses comandos digitados no terminal
grep -Rs cx88 /etc/modprobe.d/
grep -Rs cx88 /etc/rc?.d/
grep cx88 /etc/modules

jpnucci · 08 de Outubro de 2007, 18:21

Tem razão. Lá vai:

jpnucci@jpnucci:~$ grep -Rs cx88 /etc/modprobe.d/
/etc/modprobe.d/options.dpkg-old~:options cx88xx card=27 tuner=1 radio=1
/etc/modprobe.d/captura:# cx88xx módulos
/etc/modprobe.d/captura:# quando inicializar o modulo cx88xx usa estas opções
/etc/modprobe.d/captura:# alias /dev/video1 cx8800
/etc/modprobe.d/captura:# alias /dev/radio1 cx8800
/etc/modprobe.d/captura:options cx88xx card=3 tuner=71 radio=1 gbuffers=Y
/etc/modprobe.d/alsa-base:options cx88-alsa index=-2
/etc/modprobe.d/options~:options cx88xx card=27 tuner=38
/etc/modprobe.d/captura~:# cx88xx módulos
/etc/modprobe.d/captura~:# quando inicializar o modulo cx88xx usa estas opções
/etc/modprobe.d/captura~:# alias /dev/video1 cx8800
/etc/modprobe.d/captura~:# alias /dev/radio1 cx8800
/etc/modprobe.d/captura~:options cx88xx card=3 tuner=71 radio=0/1 gbuffers=Y
jpnucci@jpnucci:~$ grep -Rs cx88 /etc/rc?.d/
jpnucci@jpnucci:~$ grep cx88 /etc/modules
jpnucci@jpnucci:~$

mstr · 09 de Outubro de 2007, 00:13

voce ja instalou estes pacotes, eles ativarão o tuner

Código Selecionar

instalando o firmwares:
1- instalamos o mercurial
   apt-get install mercurial

2- instalamos os firmwares (firmwares são módulos binários), tudo no terminal
   cd /lib/firmware
   sudo wget http://mcentral.de/firmware/firmware_powerangel.tgz
   tar -xzvf firmware_powerangel.tgz

vamos fazer o teste no terminal é só ir digitando, depois colocaremos as coisas no lugar certo

Código Selecionar

sudo modprobe -r cx8800
sudo modprobe -r cx88xx
sudo modprobe -r tuner

se vc verificar com lsmod vera que estes modulos não estão + carregados
se der erro altere a ordem deles
agora vamos carregar os modulos

sudo modprobe cx8800
sudo modprobe xc3028-tuner

não especificamos a card e o tuner esta sendo carregado a parte
com
dmesg | grep cx88
dmesg | grep tuner
verifique se existe alguma card diferente de 0
o tuner é 71 mas como estamos carregando ele a parte não é necessario descrimina-lo
conforme o que tinha achado
Notes: Found on Hauppauge PCI TV Tuner Card with Remote Control
se isso estiver certo a card pode ser 1

e veja se o tvtime funciona

jpnucci · 09 de Outubro de 2007, 09:13

Deu um erro na hora do sudo modprobre cx8800. Segue abaixo:

jpnucci@jpnucci:~$ sudo modprobe -r cx8800
jpnucci@jpnucci:~$ sudo modprobe -r cx88xx
jpnucci@jpnucci:~$ sudo modprobe -r tuner
jpnucci@jpnucci:~$ sudo modprobe cx8800
WARNING: Error inserting cx88xx (/lib/modules/2.6.22-13-generic/kernel/drivers/media/video/cx88/cx88xx.ko): Unknown symbol in module, or unknown parameter (see dmesg)
FATAL: Error inserting cx8800 (/lib/modules/2.6.22-13-generic/kernel/drivers/media/video/cx88/cx8800.ko): Unknown symbol in module, or unknown parameter (see dmesg)
jpnucci@jpnucci:~$ sudo modprobe xc3028-tuner
jpnucci@jpnucci:~$ dmesg | grep cx88
[ 47.577843] cx88xx: Unknown parameter `gbuffers'
[ 47.588320] cx8800: Unknown symbol cx88_reset
[ 47.588421] cx8800: Unknown symbol cx88_call_i2c_clients
[ 47.588461] cx8800: Unknown symbol cx88_wakeup
[ 47.588545] cx8800: Unknown symbol cx88_risc_stopper
[ 47.588630] cx8800: Unknown symbol cx88_print_irqbits
[ 47.588670] cx8800: Unknown symbol cx88_set_scale
[ 47.588725] cx8800: Unknown symbol cx88_shutdown
[ 47.588794] cx8800: Unknown symbol cx88_vdev_init
[ 47.588859] cx8800: Unknown symbol cx88_core_put
[ 47.588924] cx8800: Unknown symbol cx88_audio_thread
[ 47.588992] cx8800: Unknown symbol cx88_core_irq
[ 47.589049] cx8800: Unknown symbol cx88_core_get
[ 47.589088] cx8800: Unknown symbol cx88_get_stereo
[ 47.589162] cx8800: Unknown symbol cx88_set_tvnorm
[ 47.589261] cx8800: Unknown symbol cx88_risc_buffer
[ 47.589410] cx8800: Unknown symbol cx88_set_stereo
[ 47.589566] cx8800: Unknown symbol cx88_sram_channels
[ 47.589635] cx8800: Unknown symbol cx88_set_tvaudio
[ 47.589675] cx8800: Unknown symbol cx88_sram_channel_dump
[ 47.589736] cx8800: Unknown symbol cx88_sram_channel_setup
[ 47.589812] cx8800: Unknown symbol cx88_free_buffer
[ 47.589852] cx8800: Unknown symbol cx88_boards
[ 47.590062] cx8800: Unknown symbol cx88_newstation
[ 284.071208] cx88xx: Unknown parameter `gbuffers'
[ 284.072011] cx8800: Unknown symbol cx88_reset
[ 284.072191] cx8800: Unknown symbol cx88_call_i2c_clients
[ 284.072238] cx8800: Unknown symbol cx88_wakeup
[ 284.072330] cx8800: Unknown symbol cx88_risc_stopper
[ 284.072624] cx8800: Unknown symbol cx88_print_irqbits
[ 284.072669] cx8800: Unknown symbol cx88_set_scale
[ 284.072727] cx8800: Unknown symbol cx88_shutdown
[ 284.072798] cx8800: Unknown symbol cx88_vdev_init
[ 284.072866] cx8800: Unknown symbol cx88_core_put
[ 284.072934] cx8800: Unknown symbol cx88_audio_thread
[ 284.073005] cx8800: Unknown symbol cx88_core_irq
[ 284.073065] cx8800: Unknown symbol cx88_core_get
[ 284.073108] cx8800: Unknown symbol cx88_get_stereo
[ 284.073184] cx8800: Unknown symbol cx88_set_tvnorm
[ 284.073939] cx8800: Unknown symbol cx88_risc_buffer
[ 284.074168] cx8800: Unknown symbol cx88_set_stereo
[ 284.074337] cx8800: Unknown symbol cx88_sram_channels
[ 284.074423] cx8800: Unknown symbol cx88_set_tvaudio
[ 284.074468] cx8800: Unknown symbol cx88_sram_channel_dump
[ 284.074538] cx8800: Unknown symbol cx88_sram_channel_setup
[ 284.074621] cx8800: Unknown symbol cx88_free_buffer
[ 284.074666] cx8800: Unknown symbol cx88_boards
[ 284.074891] cx8800: Unknown symbol cx88_newstation
jpnucci@jpnucci:~$ dmesg | grep tuner
jpnucci@jpnucci:~$

jomafras · 09 de Outubro de 2007, 16:18

Desculpe a demora, estava fora...
pintinho@ubuntu:~$ lspci -nn
00:00.0 Host bridge [0600]: VIA Technologies, Inc. K8T890 Host Bridge [1106:0238]
00:00.1 Host bridge [0600]: VIA Technologies, Inc. K8T890 Host Bridge [1106:1238]
00:00.2 Host bridge [0600]: VIA Technologies, Inc. K8T890 Host Bridge [1106:2238]
00:00.3 Host bridge [0600]: VIA Technologies, Inc. K8T890 Host Bridge [1106:3238]
00:00.4 Host bridge [0600]: VIA Technologies, Inc. K8T890 Host Bridge [1106:4238]
00:00.5 PIC [0800]: VIA Technologies, Inc. K8T890 I/O APIC Interrupt Controller [1106:5238]
00:00.7 Host bridge [0600]: VIA Technologies, Inc. K8T890 Host Bridge [1106:7238]
00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South] [1106:b188]
00:02.0 PCI bridge [0604]: VIA Technologies, Inc. K8T890 PCI to PCI Bridge Controller [1106:a238]
00:03.0 PCI bridge [0604]: VIA Technologies, Inc. K8T890 PCI to PCI Bridge Controller [1106:c238]
00:03.1 PCI bridge [0604]: VIA Technologies, Inc. K8T890 PCI to PCI Bridge Controller [1106:d238]
00:03.2 PCI bridge [0604]: VIA Technologies, Inc. K8T890 PCI to PCI Bridge Controller [1106:e238]
00:03.3 PCI bridge [0604]: VIA Technologies, Inc. K8T890 PCI to PCI Bridge Controller [1106:f238]
00:0c.0 Multimedia video controller [0400]: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [14f1:8800] (rev 05)
00:0f.0 RAID bus controller [0104]: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller [1106:3149] (rev 80)
00:0f.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06)
00:10.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81)
00:10.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81)
00:10.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81)
00:10.3 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81)
00:10.4 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 86)
00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South] [1106:3227]
00:11.5 Multimedia audio controller [0401]: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller [1106:3059] (rev 60)
00:11.6 Communication controller [0780]: VIA Technologies, Inc. AC'97 Modem Controller [1106:3068] (rev 80)
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
02:00.0 VGA compatible controller [0300]: nVidia Corporation GeForce 7300 LE [10de:01d1] (rev a1)
05:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller [11ab:4362] (rev 19)
pintinho@ubuntu:~$

mstr · 10 de Outubro de 2007, 02:56

jpnucci,

esse erro esta acontecendo pq no arquivo /etc/modprobe.d/captura

nesta linha
options cx88xx card=3 tuner=71 radio=1 gbuffers=Y

tire o gbuffers=y é isso que esta dando o erro, gbuffers espera um numero

é melhor neste teste voce colocar um # na frente pq qdo inicializa o modulo ele usa estas opções e isso não é necessario agora pq o teste vai ser feito manualmente

e faça o teste anterior novamente

pintinho,

é incrivel como placas iguais não respondem igualmente
ja vi um monte dessas coisas e é dificil explicar
verifica com lspci -vnn e verifique se o subdevice ou subsystem é 14f1:ea3d

jomafras · 12 de Outubro de 2007, 23:40

pintinho@ubuntu:~$ lspci -vnn
00:00.0 Host bridge [0600]: VIA Technologies, Inc. K8T890 Host Bridge [1106:0238]
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:815d]
Flags: bus master, 66MHz, medium devsel, latency 8
Memory at d0000000 (32-bit, prefetchable) [size=128M]
Capabilities: <access denied>

00:00.1 Host bridge [0600]: VIA Technologies, Inc. K8T890 Host Bridge [1106:1238]
Flags: bus master, medium devsel, latency 0

00:00.2 Host bridge [0600]: VIA Technologies, Inc. K8T890 Host Bridge [1106:2238]
Flags: bus master, medium devsel, latency 0

00:00.3 Host bridge [0600]: VIA Technologies, Inc. K8T890 Host Bridge [1106:3238]
Flags: bus master, medium devsel, latency 0

00:00.4 Host bridge [0600]: VIA Technologies, Inc. K8T890 Host Bridge [1106:4238]
Flags: bus master, medium devsel, latency 0

00:00.5 PIC [0800]: VIA Technologies, Inc. K8T890 I/O APIC Interrupt Controller [1106:5238] (prog-if 20 [IO(X)-APIC])
Flags: bus master, fast devsel, latency 0

00:00.7 Host bridge [0600]: VIA Technologies, Inc. K8T890 Host Bridge [1106:7238]
Flags: bus master, medium devsel, latency 0

00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South] [1106:b188] (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, medium devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Capabilities: <access denied>

00:02.0 PCI bridge [0604]: VIA Technologies, Inc. K8T890 PCI to PCI Bridge Controller [1106:a238] (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: d8000000-daffffff
Prefetchable memory behind bridge: c0000000-cfffffff
Capabilities: <access denied>

00:03.0 PCI bridge [0604]: VIA Technologies, Inc. K8T890 PCI to PCI Bridge Controller [1106:c238] (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Capabilities: <access denied>

00:03.1 PCI bridge [0604]: VIA Technologies, Inc. K8T890 PCI to PCI Bridge Controller [1106:d238] (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Capabilities: <access denied>

00:03.2 PCI bridge [0604]: VIA Technologies, Inc. K8T890 PCI to PCI Bridge Controller [1106:e238] (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: db000000-dcffffff
Capabilities: <access denied>

00:03.3 PCI bridge [0604]: VIA Technologies, Inc. K8T890 PCI to PCI Bridge Controller [1106:f238] (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
Capabilities: <access denied>

00:0c.0 Multimedia video controller [0400]: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [14f1:8800] (rev 05)
Flags: bus master, medium devsel, latency 32, IRQ 25
Memory at dd000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: <access denied>

00:0f.0 RAID bus controller [0104]: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller [1106:3149] (rev 80)
Subsystem: ASUSTeK Computer Inc. A7V600/K8V Deluxe/K8V-X/A8V Deluxe motherboard [1043:80ed]
Flags: bus master, medium devsel, latency 32, IRQ 21
I/O ports at c000 [size=8]
I/O ports at c400
I/O ports at c800 [size=8]
I/O ports at cc00
I/O ports at d000 [size=16]
I/O ports at d400 [size=256]
Capabilities: <access denied>

00:0f.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard [1043:80ed]
Flags: bus master, medium devsel, latency 32, IRQ 21
[virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
[virtual] Memory at 000003f0 (type 3, non-prefetchable)
[virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
[virtual] Memory at 00000370 (type 3, non-prefetchable)
I/O ports at d800 [size=16]
Capabilities: <access denied>

00:10.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038]
Flags: bus master, medium devsel, latency 32, IRQ 22
I/O ports at dc00 [size=32]
Capabilities: <access denied>

00:10.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038]
Flags: bus master, medium devsel, latency 32, IRQ 22
I/O ports at e000 [size=32]
Capabilities: <access denied>

00:10.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038]
Flags: bus master, medium devsel, latency 32, IRQ 22
I/O ports at e400 [size=32]
Capabilities: <access denied>

00:10.3 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038]
Flags: bus master, medium devsel, latency 32, IRQ 22
I/O ports at e800 [size=32]
Capabilities: <access denied>

00:10.4 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 86) (prog-if 20 [EHCI])
Subsystem: VIA Technologies, Inc. USB 2.0 [1106:3104]
Flags: bus master, medium devsel, latency 32, IRQ 22
Memory at de000000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>

00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South] [1106:3227]
Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard [1043:80ed]
Flags: bus master, stepping, medium devsel, latency 0
Capabilities: <access denied>

00:11.5 Multimedia audio controller [0401]: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller [1106:3059] (rev 60)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8174]
Flags: medium devsel, IRQ 26
I/O ports at ec00 [size=256]
Capabilities: <access denied>

00:11.6 Communication controller [0780]: VIA Technologies, Inc. AC'97 Modem Controller [1106:3068] (rev 80)
Flags: medium devsel, IRQ 26
I/O ports at 1000 [size=256]
Capabilities: <access denied>

00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Flags: fast devsel
Capabilities: <access denied>

00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
Flags: fast devsel

00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
Flags: fast devsel

00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Flags: fast devsel

02:00.0 VGA compatible controller [0300]: nVidia Corporation GeForce 7300 LE [10de:01d1] (rev a1) (prog-if 00 [VGA])
Subsystem: XFX Pine Group Inc. Unknown device [1682:2208]
Flags: bus master, fast devsel, latency 0, IRQ 24
Memory at d8000000 (32-bit, non-prefetchable) [size=16M]
Memory at c0000000 (64-bit, prefetchable) [size=256M]
Memory at d9000000 (64-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at da000000 [disabled] [size=128K]
Capabilities: <access denied>

05:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller [11ab:4362] (rev 19)
Subsystem: ASUSTeK Computer Inc. Marvell 88E8053 Gigabit Ethernet controller PCIe (Asus) [1043:8142]
Flags: bus master, fast devsel, latency 0, IRQ 23
Memory at dc000000 (64-bit, non-prefetchable) [size=16K]
I/O ports at b000 [size=256]
Expansion ROM at db000000 [disabled] [size=128K]
Capabilities: <access denied>