Tentando Instalar Placa de Captura "AVerTV GO 007 Plus/FM Plus"

[jomafras]

Tota,
Temos que tentar resolver :
Veja aí a minha placa como está e, vê se vc consegue alguma coisa a mais pro emanoeljulio

pintinho@ubuntu:~$ dmesg | grep cx88
[   34.488713] CORE cx88[0]: subsystem: 0000:0000, board: PixelView PlayTV Ultra Pro (Stereo) [card=27,insmod option]
[   34.866871] input: cx88 IR (PixelView PlayTV Ultra as /class/input/input2
[   34.866903] cx88[0]/0: found at 0000:00:0c.0, rev: 5, irq: 24, latency: 32, mmio: 0xdd000000
[   35.024722] tuner 1-0061: chip found @ 0xc2 (cx88[0])
[   35.025687] tuner 1-0063: chip found @ 0xc6 (cx88[0])
[   35.034780] cx88[0]/0: registered device video0 [v4l2]
[   35.034798] cx88[0]/0: registered device vbi0
[   35.034816] cx88[0]/0: registered device radio0

[emanoeljulio]

Não encontrei o termo alsa no relatorio do comando dmesg
dá uma olhada

Código Selecionar Expandir

a1d0
[    0.000000] ACPI: RSDT (v001 POSITI ABACAXIS 0x05000718 MSFT 0x00000097) @ 0x3fed0000
[    0.000000] ACPI: FADT (v002 A M I  OEMFACP  0x05000718 MSFT 0x00000097) @ 0x3fed0200
[    0.000000] ACPI: MADT (v001 A M I  OEMAPIC  0x05000718 MSFT 0x00000097) @ 0x3fed0500
[    0.000000] ACPI: MCFG (v001 A M I  OEMMCFG  0x05000718 MSFT 0x00000097) @ 0x3fed0580
[    0.000000] ACPI: SLIC (v001 POSITI ABACAXIS 0x05000718 MSFT 0x00000097) @ 0x3fed0384
[    0.000000] ACPI: OEMB (v001 A M I  AMI_OEM  0x05000718 MSFT 0x00000097) @ 0x3fede040
[    0.000000] ACPI: DSDT (v001  A7255 A725500D 0x0000000d INTL 0x02002026) @ 0x00000000
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] Processor #0 6:15 APIC version 20
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] Processor #1 6:15 APIC version 20
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24])
[    0.000000] IOAPIC[1]: apic_id 3, version 3, address 0xfecc0000, GSI 24-47
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 2 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 40000000 (gap: 3ff00000:bed00000)
[    0.000000] Detected 1800.090 MHz processor.
[   38.474672] Built 1 zonelists.  Total pages: 259795
[   38.474678] Kernel command line: root=UUID=a0e2b085-77b3-443a-bcbe-c93b99215631 ro quiet splash
[   38.474823] mapped APIC to ffffd000 (fee00000)
[   38.474825] mapped IOAPIC to ffffc000 (fec00000)
[   38.474827] mapped IOAPIC to ffffb000 (fecc0000)
[   38.474830] Enabling fast FPU save and restore... done.
[   38.474833] Enabling unmasked SIMD FPU exception support... done.
[   38.474842] Initializing CPU#0
[   38.474918] PID hash table entries: 4096 (order: 12, 16384 bytes)
[   38.477463] Console: colour VGA+ 80x25
[   38.477836] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[   38.478165] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[   38.501764] Memory: 1027160k/1047360k available (1992k kernel code, 19508k reserved, 900k data, 328k init, 129856k highmem)
[   38.501772] virtual kernel memory layout:
[   38.501773]     fixmap  : 0xfff4e000 - 0xfffff000   ( 708 kB)
[   38.501774]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   38.501775]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[   38.501776]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[   38.501777]       .init : 0xc03d9000 - 0xc042b000   ( 328 kB)
[   38.501778]       .data : 0xc02f2374 - 0xc03d36d4   ( 900 kB)
[   38.501779]       .text : 0xc0100000 - 0xc02f2374   (1992 kB)
[   38.501782] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   38.578765] Calibrating delay using timer specific routine.. 3602.51 BogoMIPS (lpj=7205029)
[   38.578802] Security Framework v1.0.0 initialized
[   38.578808] SELinux:  Disabled at boot.
[   38.578822] Mount-cache hash table entries: 512
[   38.578947] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001
[   38.578954] monitor/mwait feature present.
[   38.578956] using mwait in idle threads.
[   38.578959] CPU: L1 I cache: 32K, L1 D cache: 32K
[   38.578961] CPU: L2 cache: 2048K
[   38.578964] CPU: Physical Processor ID: 0
[   38.578965] CPU: Processor Core ID: 0
[   38.578967] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001
[   38.578975] Compat vDSO mapped to ffffe000.
[   38.578978] Remapping vsyscall page to ffffe000
[   38.578990] Checking 'hlt' instruction... OK.
[   38.594853] SMP alternatives: switching to UP code
[   38.595196] Early unpacking initramfs... done
[   38.890952] ACPI: Core revision 20060707
[   38.891240] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[   38.893971] CPU0: Intel(R) Core(TM)2 CPU          4300  @ 1.80GHz stepping 02
[   38.893993] SMP alternatives: switching to SMP code
[   38.894103] Booting processor 1/1 eip 3000
[   38.904692] Initializing CPU#1
[   38.982151] Calibrating delay using timer specific routine.. 3600.19 BogoMIPS (lpj=7200386)
[   38.982158] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001
[   38.982163] monitor/mwait feature present.
[   38.982166] CPU: L1 I cache: 32K, L1 D cache: 32K
[   38.982168] CPU: L2 cache: 2048K
[   38.982170] CPU: Physical Processor ID: 0
[   38.982171] CPU: Processor Core ID: 1
[   38.982172] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001
[   38.982697] CPU1: Intel(R) Core(TM)2 CPU          4300  @ 1.80GHz stepping 02
[   38.982720] Total of 2 processors activated (7202.70 BogoMIPS).
[   38.983061] ENABLING IO-APIC IRQs
[   38.983251] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   39.129942] checking TSC synchronization across 2 CPUs: passed.
[    0.003999] Brought up 2 CPUs
[    0.419228] migration_cost=397
[    0.419520] Booting paravirtualized kernel on bare hardware
[    0.419629] Time: 21:44:56  Date: 07/25/107
[    0.419658] NET: Registered protocol family 16
[    0.419746] EISA bus registered
[    0.419751] ACPI: bus type pci registered
[    0.419954] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
[    0.419956] PCI: Using configuration type 1
[    0.419958] Setting up standard PCI resources
[    0.434848] ACPI: Interpreter enabled
[    0.434850] ACPI: Using IOAPIC for interrupt routing
[    0.435465] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.435470] PCI: Probing PCI hardware (bus 00)
[    0.437110] Boot video device is 0000:02:00.0
[    0.437455] PCI: Transparent bridge - 0000:00:13.1
[    0.437522] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.458681] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.458806] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT]
[    0.459132] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP0._PRT]
[    0.466468] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SPPE._PRT]
[    0.466594] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
[    0.467741] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.467986] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.468229] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.468473] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.468716] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.468965] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.469215] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.469467] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.469722] ACPI: PCI Root Bridge [PCI1] (0000:80)
[    0.469726] PCI: Probing PCI hardware (bus 80)
[    0.472347] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
[    0.473054] Linux Plug and Play Support v0.97 (c) Adam Belay
[    0.473062] pnp: PnP ACPI init
[    0.478164] pnp: PnP ACPI: found 16 devices
[    0.478168] PnPBIOS: Disabled by ACPI PNP
[    0.478210] PCI: Using ACPI for IRQ routing
[    0.478212] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[    0.496749] PCI: Device 0000:80:01.0 not found by BIOS
[    0.496774] NET: Registered protocol family 8
[    0.496775] NET: Registered protocol family 20
[    0.497625] pnp: 00:0b: ioport range 0xa00-0xa0f has been reserved
[    0.497628] pnp: 00:0b: ioport range 0x290-0x29f has been reserved
[    0.497909] PCI: Bridge: 0000:00:01.0
[    0.497910]   IO window: disabled.
[    0.497916]   MEM window: disabled.
[    0.497920]   PREFETCH window: disabled.
[    0.497925] PCI: Bridge: 0000:00:02.0
[    0.497927]   IO window: disabled.
[    0.497932]   MEM window: fc000000-fe9fffff
[    0.497937]   PREFETCH window: d0000000-dfffffff
[    0.497942] PCI: Bridge: 0000:00:03.0
[    0.497943]   IO window: disabled.
[    0.497949]   MEM window: disabled.
[    0.497953]   PREFETCH window: disabled.
[    0.497958] PCI: Bridge: 0000:00:13.1
[    0.497961]   IO window: e000-efff
[    0.497967]   MEM window: fea00000-feafffff
[    0.497971]   PREFETCH window: disabled.
[    0.497992] PCI: Setting latency timer of device 0000:00:01.0 to 64
[    0.498009] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 16
[    0.498015] PCI: Setting latency timer of device 0000:00:02.0 to 64
[    0.498031] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 17
[    0.498037] PCI: Setting latency timer of device 0000:00:03.0 to 64
[    0.498052] PCI: Setting latency timer of device 0000:00:13.1 to 64
[    0.498078] NET: Registered protocol family 2
[    0.539477] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.539621] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.540359] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.540774] TCP: Hash tables configured (established 131072 bind 65536)
[    0.540778] TCP reno registered
[    0.551644] checking if image is initramfs... it is
[    1.135585] Freeing initrd memory: 6786k freed
[    1.136417] audit: initializing netlink socket (disabled)
[    1.136445] audit(1188078296.872:1): initialized
[    1.136570] highmem bounce pool size: 64 pages
[    1.136665] VFS: Disk quotas dquot_6.5.1
[    1.136688] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.136764] io scheduler noop registered
[    1.136766] io scheduler anticipatory registered
[    1.136768] io scheduler deadline registered
[    1.136778] io scheduler cfq registered (default)
[    1.137082] PCI: Setting latency timer of device 0000:00:02.0 to 64
[    1.137130] assign_interrupt_mode Found MSI capability
[    1.137133] Allocate Port Service[0000:00:02.0:pcie00]
[    1.137171] Allocate Port Service[0000:00:02.0:pcie02]
[    1.137283] PCI: Setting latency timer of device 0000:00:03.0 to 64
[    1.137338] assign_interrupt_mode Found MSI capability
[    1.137340] Allocate Port Service[0000:00:03.0:pcie00]
[    1.137371] Allocate Port Service[0000:00:03.0:pcie02]
[    1.137556] isapnp: Scanning for PnP cards...
[    1.491088] isapnp: No Plug & Play device found
[    1.510660] Real Time Clock Driver v1.12ac
[    1.510725] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[    1.510854] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.510974] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    1.511461] 00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.511646] 00:05: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    1.511912] ACPI: PCI Interrupt 0000:04:04.0[A] -> GSI 16 (level, low) -> IRQ 18
[    1.512085] 0000:04:04.0: ttyS2 at I/O 0xe808 (irq = 18) is a 16450
[    1.512192] 0000:04:04.0: ttyS3 at I/O 0xe810 (irq = 18) is a 8250
[    1.512238] Couldn't register serial port 0000:04:04.0: -28
[    1.512299] mice: PS/2 mouse device common for all mice
[    1.512830] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[    1.513078] input: Macintosh mouse button emulation as /class/input/input0
[    1.513110] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[    1.513113] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[    1.513406] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    1.513976] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.513979] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.514090] EISA: Probing bus 0 at eisa.0
[    1.514134] EISA: Detected 0 cards.
[    1.544297] TCP cubic registered
[    1.544308] NET: Registered protocol family 1
[    1.544331] Starting balanced_irq
[    1.544337] Using IPI No-Shortcut mode
f

[emanoeljulio]

continuação

Código Selecionar Expandir

[    1.544483] ACPI: (supports S0 S1 S3 S4 S5)
[    1.544526]   Magic number: 3:803:753
[    1.544889] Freeing unused kernel memory: 328k freed
[    1.545637] Time: tsc clocksource has been installed.
[    1.548644] input: AT Translated Set 2 keyboard as /class/input/input1
[    2.732476] Capability LSM initialized
[    2.766807] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [   AMI] OemTableId [  CPU1PM] [20060707]
[    2.766868] ACPI: Processor [CPU1] (supports 16 throttling states)
[    2.767052] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [   AMI] OemTableId [  CPU2PM] [20060707]
[    2.767091] ACPI: Processor [CPU2] (supports 16 throttling states)
[    2.767098] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
[    2.767105] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
[    3.138217] usbcore: registered new interface driver usbfs
[    3.138244] usbcore: registered new interface driver hub
[    3.138269] usbcore: registered new device driver usb
[    3.138958] USB Universal Host Controller Interface driver v3.0
[    3.139034] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 20 (level, low) -> IRQ 19
[    3.139046] uhci_hcd 0000:00:10.0: UHCI Host Controller
[    3.139230] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[    3.139256] uhci_hcd 0000:00:10.0: irq 19, io base 0x0000c480
[    3.139354] usb usb1: configuration #1 chosen from 1 choice
[    3.139377] hub 1-0:1.0: USB hub found
[    3.139383] hub 1-0:1.0: 2 ports detected
[    3.247452] ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 22 (level, low) -> IRQ 20
[    3.247469] uhci_hcd 0000:00:10.1: UHCI Host Controller
[    3.247581] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[    3.247609] uhci_hcd 0000:00:10.1: irq 20, io base 0x0000c800
[    3.247888] usb usb2: configuration #1 chosen from 1 choice
[    3.247916] hub 2-0:1.0: USB hub found
[    3.247922] hub 2-0:1.0: 2 ports detected
[    3.264691] SCSI subsystem initialized
[    3.269170] libata version 2.20 loaded.
[    3.271302] via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker
[    3.354637] ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 21
[    3.354654] uhci_hcd 0000:00:10.2: UHCI Host Controller
[    3.354688] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[    3.354724] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000c880
[    3.354805] usb usb3: configuration #1 chosen from 1 choice
[    3.354830] hub 3-0:1.0: USB hub found
[    3.354835] hub 3-0:1.0: 2 ports detected
[    3.454967] ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 23 (level, low) -> IRQ 22
[    3.454977] uhci_hcd 0000:00:10.3: UHCI Host Controller
[    3.454996] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[    3.455019] uhci_hcd 0000:00:10.3: irq 22, io base 0x0000cc00
[    3.455097] usb usb4: configuration #1 chosen from 1 choice
[    3.455118] hub 4-0:1.0: USB hub found
[    3.455124] hub 4-0:1.0: 2 ports detected
[    3.559643] VP_IDE: IDE controller at PCI slot 0000:00:0f.1
[    3.559673] VP_IDE: chipset revision 7
[    3.559676] VP_IDE: not 100% native mode: will probe irqs later
[    3.559703] VP_IDE: VIA vt8237a (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
[    3.559713]     ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:pio, hdb:pio
[    3.559724]     ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA
[    3.559733] Probing IDE interface ide0...
[    4.127163] Probing IDE interface ide1...
[    4.385080] usb 4-2: new full speed USB device using uhci_hcd and address 2
[    4.553405] usb 4-2: configuration #1 chosen from 1 choice
[    4.565021] usbcore: registered new interface driver libusual
[    4.568727] Initializing USB Mass Storage driver...
[    4.568813] scsi0 : SCSI emulation for USB Mass Storage devices
[    4.568862] usbcore: registered new interface driver usb-storage
[    4.568865] USB Mass Storage support registered.
[    4.568933] usb-storage: device found at 2
[    4.568935] usb-storage: waiting for device to settle before scanning
[    4.655114] hdc: LITE-ON DVDRW LH-20A1P, ATAPI CD/DVD-ROM drive
[    4.932845] hdd: SAMSUNG SP0802N, ATA DISK drive
[    4.989838] ide1 at 0x170-0x177,0x376 on irq 15
[    5.004768] sata_via 0000:00:0f.0: version 2.1
[    5.004793] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 21
[    5.004817] sata_via 0000:00:0f.0: routed to hard irq line 11
[    5.004853] ata1: SATA max UDMA/133 cmd 0x0001dc00 ctl 0x0001d882 bmdma 0x0001d400 irq 21
[    5.004879] ata2: SATA max UDMA/133 cmd 0x0001d800 ctl 0x0001d482 bmdma 0x0001d408 irq 21
[    5.004886] scsi1 : sata_via
[    5.210944] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    5.378589] ATA: abnormal status 0x7F on port 0x0001dc07
[    5.389318] ATA: abnormal status 0x7F on port 0x0001dc07
[    5.415103] ata1.00: ata_hpa_resize 1: sectors = 312581808, hpa_sectors = 312581808
[    5.415110] ata1.00: ATA-7: WDC WD1600AABS-00PRA0, 05.06H05, max UDMA/133
[    5.415114] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    5.420600] ata1.00: ata_hpa_resize 1: sectors = 312581808, hpa_sectors = 312581808
[    5.420605] ata1.00: configured for UDMA/133
[    5.420613] scsi2 : sata_via
[    5.625526] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[    5.636269] ATA: abnormal status 0x7F on port 0x0001d807
[    5.636369] scsi 1:0:0:0: Direct-Access     ATA      WDC WD1600AABS-0 05.0 PQ: 0 ANSI: 5
[    5.639733] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21
[    5.639745] ehci_hcd 0000:00:10.4: EHCI Host Controller
[    5.639774] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
[    5.639806] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfbfffc00
[    5.639813] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    5.639903] usb usb5: configuration #1 chosen from 1 choice
[    5.639931] hub 5-0:1.0: USB hub found
[    5.639939] hub 5-0:1.0: 8 ports detected
[    5.646242] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
[    5.646254] sda: Write Protect is off
[    5.646256] sda: Mode Sense: 00 3a 00 00
[    5.646269] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.646315] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
[    5.646323] sda: Write Protect is off
[    5.646324] sda: Mode Sense: 00 3a 00 00
[    5.646337] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.646340]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[    5.682578] sd 1:0:0:0: Attached scsi disk sda
[    5.686065] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    5.746520] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 22
[    5.746613] eth0: VIA Rhine II at 0x1c000, 00:16:17:fd:a1:76, IRQ 22.
[    5.747330] eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1.
[    5.753176] hdd: max request size: 512KiB
[    5.758328] hdd: Host Protected Area detected.
[    5.758330]  current capacity is 156363790 sectors (80058 MB)
[    5.758331]  native  capacity is 156365903 sectors (80059 MB)
[    5.760497] hdd: Host Protected Area disabled.
[    5.760502] hdd: 156365903 sectors (80059 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
[    5.760717] hdd: cache flushes supported
[    5.760763]  hdd: hdd1
[    5.765069] hdc: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
[    5.765078] Uniform CD-ROM driver Revision: 3.20
[    5.988349] usb 5-8: new high speed USB device using ehci_hcd and address 2
[    6.030500] Attempting manual resume
[    6.030503] swsusp: Resume From Partition 8:2
[    6.030504] PM: Checking swsusp image.
[    6.039606] PM: Resume from disk failed.
[    6.065881] kjournald starting.  Commit interval 5 seconds
[    6.065889] EXT3-fs: mounted filesystem with ordered data mode.
[    6.123842] usb 5-8: configuration #1 chosen from 1 choice
[    6.124077] scsi3 : SCSI emulation for USB Mass Storage devices
[    6.124126] usb-storage: device found at 2
[    6.124128] usb-storage: waiting for device to settle before scanning
[    6.124200] usb 4-2: USB disconnect, address 2
[   11.118710] usb-storage: device scan complete
[   11.119313] scsi 3:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
[   11.119819] scsi 3:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
[   11.120316] scsi 3:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
[   11.120816] scsi 3:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
[   11.122090] sd 3:0:0:0: Attached scsi removable disk sdb
[   11.122136] sd 3:0:0:0: Attached scsi generic sg1 type 0
[   11.123204] sd 3:0:0:1: Attached scsi removable disk sdc
[   11.123251] sd 3:0:0:1: Attached scsi generic sg2 type 0
[   11.124198] sd 3:0:0:2: Attached scsi removable disk sdd
[   11.124247] sd 3:0:0:2: Attached scsi generic sg3 type 0
[   11.125196] sd 3:0:0:3: Attached scsi removable disk sde
[   11.125233] sd 3:0:0:3: Attached scsi generic sg4 type 0
[   13.715737] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[   14.584097] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   14.648597] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   14.802892] input: PC Speaker as /class/input/input2
[   14.990717] parport: PnPBIOS parport detected.
[   14.990764] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   15.061178] Linux agpgart interface v0.102 (c) Dave Jones
[   15.126906] NET: Registered protocol family 17
[   15.366663] nvidia: module license 'NVIDIA' taints kernel.
[   15.619127] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 24 (level, low) -> IRQ 23
[   15.619144] PCI: Setting latency timer of device 0000:02:00.0 to 64
[   15.619269] NVRM: loading NVIDIA UNIX x86 Kernel Module  100.14.11  Wed Jun 13 18:21:22 PDT 2007
[   15.648969] Linux video capture interface: v2.00
[   15.688081] input: ImPS/2 Generic Wheel Mouse as /class/input/input3
[   15.736808] saa7130/34: v4l2 driver version 0.2.14 loaded
[   15.736897] ACPI: PCI Interrupt 0000:04:05.0[A] -> GSI 17 (level, low) -> IRQ 24
[   15.736905] saa7133[0]: found at 0000:04:05.0, rev: 209, irq: 24, latency: 32, mmio: 0xfeafe800
[   15.736912] saa7133[0]: subsystem: 1461:f31d, board: ASUSTeK P7131 Dual [card=78,insmod option]
[   15.736926] saa7133[0]: board init: gpio is 80648
[   15.878691] saa7133[0]: i2c eeprom 00: 61 14 1d f3 ff ff ff ff ff ff ff ff ff ff ff ff
[   15.878705] saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   15.878717] saa7133[0]: i2c eeprom 20: ff d2 fe ff ff ff ff ff ff ff ff ff ff ff ff ff
[   15.878729] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   15.878741] saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   15.878753] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   15.878764] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   15.878776] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   15.979346] tuner 1-004b: chip found @ 0x96 (saa7133[0])
[   16.039556] tuner 1-004b: setting tuner address to 61
[   16.083711] tuner 1-004b: type set to tda8290+75a
[   16.196515] tuner 1-004b: setting tuner address to 61
[   16.236864] tuner 1-004b: type set to tda8290+75a
[   16.304197] saa7133[0]: registered device video0 [v4l2]
[   16.304216] saa7133[0]: registered device vbi0
[   16.304233] saa7133[0]: registered device radio0
[   16.304327] ACPI: PCI Interrupt 0000:80:01.0[A] -> GSI 17 (level, low) -> IRQ 24
[   16.304349] PCI: Setting latency timer of device 0000:80:01.0 to 64
[   16.514804] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[   16.735943] lp0: using parport0 (interrupt-driven).
[   16.759743] Adding 248996k swap on /dev/disk/by-uuid/820486e3-1470-414a-b7ac-687af4ae96a2.  Priority:-1 extents:1 across:248996k
[   17.086167] EXT3 FS on sda3, internal journal
[   17.203703] NET: Registered protocol family 10
[   17.203789] lo: Disabled Privacy Extensions
[   27.964955] eth0: no IPv6 routers present
[   48.763286] kjournald starting.  Commit interval 5 seconds
[   48.763544] EXT3 FS on sda5, internal journal
[   48.763550] EXT3-fs: mounted filesystem with ordered data mode.
[   48.792689] NTFS driver 2.1.28 [Flags: R/O MODULE].
[   48.855894] NTFS volume version 3.1.
[   49.468254] input: Power Button (FF) as /class/input/input4
[   49.468413] ACPI: Power Button (FF) [PWRF]
[   49.495098] input: Sleep Button (CM) as /class/input/input5
[   49.495154] ACPI: Sleep Button (CM) [SLPB]
[   49.495200] input: Power Button (CM) as /class/input/input6
[   49.495217] ACPI: Power Button (CM) [PWRB]
[   49.532683] Using specific hotkey driver
[   49.616353] ibm_acpi: ec object not found
[   49.648659] No dock devices found.
[   49.688030] pcc_acpi: loading...
[   52.021342] ppdev: user-space parallel port driver
[   53.956791] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[   53.956796] apm: disabled - APM is not SMP safe.
[   54.865916] Bluetooth: Core ver 2.11
[   54.865987] NET: Registered protocol family 31
[   54.865990] Bluetooth: HCI device and connection manager initialized
[   54.865994] Bluetooth: HCI socket layer initialized
[   54.895455] Bluetooth: L2CAP ver 2.8
[   54.895461] Bluetooth: L2CAP socket layer initialized
[   55.036097] Bluetooth: RFCOMM socket layer initialized
[   55.036113] Bluetooth: RFCOMM TTY layer initialized
[   55.036116] Bluetooth: RFCOMM ver 1.8
[   58.265029] hda-intel: Invalid position buffer, using LPIB read method instead.
[   66.589013] eth0: no IPv6 routers present


[maudy]

Perae, tem alguma coisa errada.

Sua placa tem video, OK.

entre em terminal e de um dmesg |grep saa ( voce ja fez, mas agora vai estar diferente. O que eu quero é a parte onde esta escrito:

Código Selecionar Expandir

[  961.779484] saa7133[0]: i2c scan: found device @ 0x96  [???]
[  961.787300] saa7133[0]: i2c scan: found device @ 0xa0  [eeprom]
[  961.891206] tuner 0-004b: chip found @ 0x96 (saa7133[0])
[  962.198580] saa7133[0]: registered device video0 [v4l2]
[  962.199395] saa7133[0]: registered device vbi0
[  962.199465] saa7133[0]: registered device radio0
[  962.211881] saa7134 ALSA driver for DMA sound loaded
[  962.211917] saa7133[0]/alsa: saa7133[0] at 0xe8005000 irq 23 registered as card -2

Este é o meu caso, especificamente. E estou sem som.
Obrigado pela ajuda desde já.

[Tota]

O estranho é que pelo seu dmesg os modulos saa7134 e saa7134-alsa não estão acrregados, pelo menos eu não vi.

Temos que encontrar sua placa de som !

Código Selecionar Expandir



cat /proc/asound/cards



Tem que aparecer 2 placas de som. a da sua maquina e a da placa de captura.

Estamos no aguardo.

[maudy]

Turma, eu instalei o SOX via Synaptic e depois com este comando:

Código Selecionar Expandir

sudo sox -c 2 -sw -r 32000 -t ossdsp /dev/dsp1 -t ossdsp /dev/dsp
O som surgiu!!!!!

Mas como fazê-lo funcionar sempre, ao abrir o TVTIME e não ter que abrir o terminal para isto?

[Tota]

maudy,


Meu script esta na pagina 1 deste topico.

Copie num editor de texto, salve e mude as permissões de execussão, leitura e escrita.

[],s

[emanoeljulio]

Resposta para o comando

Código Selecionar Expandir

emanoel@emanoel:~$ cat /proc/asound/cards
0 [VT82xx         ]: HDA-Intel - HDA VIA VT82xx
                      HDA VIA VT82xx at 0xfebfc000 irq 24
emanoel@emanoel:~$


[emanoeljulio]

Antes de fazer aquele tutorial que vc postou como link http://mstr.ueuo.com/saa/instalar.php?m=ASUSTeK%20P7131%20Dual&c=78&t=54&p=7o comando  dmesg | grep saa713 aparecia assim

Código Selecionar Expandir

emanoel@emanoel:~$ dmesg | grep saa713
[   15.297527] saa7130/34: v4l2 driver version 0.2.14 loaded
[   15.297845] saa7133[0]: found at 0000:04:05.0, rev: 209, irq: 23, latency: 32, mmio: 0xfeafe800
[   15.297851] saa7133[0]: subsystem: 1461:f31d, board: Avermedia AVerTV GO 007 FM [card=57,insmod option]
[   15.297859] saa7133[0]: board init: gpio is 80658
[   15.298016] input: saa7134 IR (Avermedia AVerTV GO as /class/input/input3
[   15.444422] saa7133[0]: i2c eeprom 00: 61 14 1d f3 ff ff ff ff ff ff ff ff ff ff ff ff
[   15.444439] saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   15.444451] saa7133[0]: i2c eeprom 20: ff d2 fe ff ff ff ff ff ff ff ff ff ff ff ff ff
[   15.444462] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   15.444474] saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   15.444486] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   15.444497] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   15.444514] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   15.464594] saa7133[0]: i2c scan: found device @ 0x96  [???]
[   15.472701] saa7133[0]: i2c scan: found device @ 0xa0  [eeprom]
[   15.930527] tuner 1-004b: chip found @ 0x96 (saa7133[0])
[   16.254575] saa7133[0]: registered device video0 [v4l2]
[   16.254604] saa7133[0]: registered device vbi0
[   16.254630] saa7133[0]: registered device radio0
[   16.274017] saa7134 ALSA driver for DMA sound loaded
[   16.274043] saa7133[0]/alsa: saa7133[0] at 0xfeafe800 irq 23 registered as card -2
emanoel@emanoel:~$

depois de fazer tudo aquilo é  que sumiu as duas ultimas linha.
Como no texto vc pede para apagar as referências a saa7133 eu provavelmente apagei saa7133-alsa ... é possivel?

[maudy]

maudy,
Meu script esta na pagina 1 deste tópico.
Copie num editor de texto, salve e mude as permissões de execução, leitura e escrita.
[],s

Blz. Fiz isso (mudei as pemissões de leitura e escrita), restartei p TVTime e nada mudou. Usei como

Código Selecionar Expandir

chmod +x tvtime.sh. Confere?
Abs!!!

[emanoeljulio]

Não sei se isso pode ajudar mas qndo executo o script q vc postou mostra o seguinte

Código Selecionar Expandir

A correr tvtime 1.0.2.
A ler a configuração de /etc/tvtime/tvtime.xml
A ler a configuração de /home/emanoel/.tvtime/tvtime.xml
sox: Can't open input file '/dev/dsp1': No such file or directory


[Tota]

Bom,

Turma, eu instalei o SOX via Synaptic e depois com este comando:

Código Selecionar Expandir

sudo sox -c 2 -sw -r 32000 -t ossdsp /dev/dsp1 -t ossdsp /dev/dsp
O som surgiu!!!!!

Mas como fazê-lo funcionar sempre, ao abrir o TVTIME e não ter que abrir o terminal para isto?

Mas voce falou que o som estava rolando.

Verifique como o script esta escrito e coloque o sox que voce fez funcionar nele ( sem o sudo )

para terminar o script pelo terminal tem que teclar ctrl+c, porem se voce criar um lançador isto não é necessário.
( so depois de estar tudo funcionando.

Vou postar o script novamnete

Código Selecionar Expandir



#!/bin/sh
#
#Arquivo para configurar a placa PixelView PlayTV Mobile no Brasil
#Sistema PAL-M
#Por tota
#   
#
# Liga o som

sox -c 2 -s -w -r 32000 -t ossdsp /dev/dsp1 -t ossdsp -w -r 32000 /dev/dsp &

tvtime --mixer=/dev/mixer:pcm
wait tvtime
t=`pidof sox`;
kill $t;
amixer -c 0 sset PCM 80%,80% unmute

#sai
exit



o /dev/dsp1 é sua placa de som de captura. Se funcionou antes, tem que funcionar agora.

[maudy]

MA-GA-VI-LHA!!!!
Funcionou!!!!
Parabéns ao Tota!!!!!!!!!!!!!

Isso merece um belo post meu no blog!!!! Valeeeeeeeeeeeeeeeeeeeeeeeeeuuuuu!!

E depois me perguntam pq não uso outra distro... Ubuntu é bom por conta dos colegas que se ajudam!!!
Abração!
Maudy

[Tota]

emanoeljulio,

Vamos por partes.

1) voce seguiu a dica do link.

em /etc/modprobe.d/seu_arquivo  voce colocou os options

options saa7134 i2c_scan=1 card=XX tuner=XX video_nr=0 vbi_nr=0 radio_nr=0

Em /etc/rc5.d/seu_arquivo voce colocou

modprobe saa7134
modprobe saa7134-alsa

2) Seu comando cat esta reportando somente a placa principal. ( volte e verifique o que esta errado nos itens acima. Porisso sumiu do dmesg. Verifique com atenção o card= e o tuner=

3) Novamente dmesg ( para ver de novo seu alsa-1 )

4) tem que funcionar. Senão algo foi feito errado, um espaço, um caractere, alguma coisa.

[emanoeljulio]

Nada ... continua na mesma ... faremos assim ... já é tarde fica difícil pensar essa hora ... vou reinstalar o sistema e amanhã começarei do zero ... e veremos se terei sorte ... mas não posso deixa de te agradecer ... sua atenção foi incrível ... "vc é meu HERÓI " ... acho que isso aqui é um exemplo utópico para os atendimentos de TELEMARKETING ... rsrsrs ... valeu mesmo