ERROR 17:CANNOT MOUNT SELECTED PARTITION

[fr4nc0w]

deu esse erro ! quando fui dar boot no ubuntu pelo Grub, ai só entra no windows..

eu tive q restaurar o meu grub pois instalei o Windows depois do linux, e dai quando fui entrar no linux deu isso ae...oq devo fazer?

meu eh ubuntu 7.05 ...espero ajuda de todos..

flw e vlw !

[clcampos]

Amigo vamos lá, primeiro acho que este título não pode ficar em maiúsculo... se não me engano.

Você poderia entrar com o LiveCD e postar o resultado do comando:

Código Selecionar Expandir

$ sudo fdisk -l

Poderia postar também o conteúdo do arquivo /boot/grub/menu.lst,  mas observe não é o arquivo do LiveCD e sim da partição onde o Linux esta instalado, então você deve montar a partição no Linux em um diretório e ai copiar o conteúdo do arquivo que vai estar em:

/diretório-de-montagem/boot/grub/menu.lst

[fr4nc0w]

E oq apareceu quando digitei  "fdisk -l"

Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *           1        3190    25623643+   7  HPFS/NTFS
/dev/sda2            3191        3280      722925   82  Linux swap / Solaris
/dev/sda3            3281        4074     6377805   83  Linux
/dev/sda4            4075       19457   123563947+   f  W95 Ext'd (LBA)
/dev/sda5            4075       19457   123563916    7  HPFS/NTFS

Disk /dev/sdb: 1014 MB, 1014751744 bytes
32 heads, 61 sectors/track, 1015 cylinders
Units = cylinders of 1952 * 512 = 999424 bytes

This doesn't look like a partition table
Probably you selected the wrong device.

   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1   ?      957875     1044294    84344761   69  Unknown
Partition 1 has different physical/logical beginnings (non-Linux?):
     phys=(68, 13, 10) logical=(957874, 21, 37)
Partition 1 has different physical/logical endings:
     phys=(288, 115, 43) logical=(1044293, 15, 36)
Partition 1 does not end on cylinder boundary.
/dev/sdb2   ?      871681     1829612   934940732+  73  Unknown
Partition 2 has different physical/logical beginnings (non-Linux?):
     phys=(371, 114, 37) logical=(871680, 1, 61)
Partition 2 has different physical/logical endings:
     phys=(366, 32, 33) logical=(1829611, 4, 30)
Partition 2 does not end on cylinder boundary.
/dev/sdb3   ?           2           2           0   74  Unknown
Partition 3 has different physical/logical beginnings (non-Linux?):
     phys=(371, 114, 37) logical=(1, 10, 12)
Partition 3 has different physical/logical endings:
     phys=(372, 97, 50) logical=(1, 10, 11)
Partition 3 does not end on cylinder boundary.
/dev/sdb4         1478321     1478348       26207+   0  Empty
Partition 4 has different physical/logical beginnings (non-Linux?):
     phys=(0, 0, 0) logical=(1478320, 8, 25)
Partition 4 has different physical/logical endings:
     phys=(0, 0, 0) logical=(1478347, 3, 40)
Partition 4 does not end on cylinder boundary.

Partition table entries are not in disk order

----------------------------------------------------

Abaixo o Menu.lst

# menu.lst - See: grub(8), info grub, update-grub(8)
#            grub-install(8), grub-floppy(8),
#            grub-md5-crypt, /usr/share/doc/grub
#            and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not change this entry to 'saved' or your
# array will desync and will not let you boot your system.
default      6

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout      10

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line)  and entries protected by the
# command 'lock'
# e.g. password topsecret
#      password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title      Windows 95/98/NT/2000
# root      (hd0,0)
# makeactive
# chainloader   +1
#
# title      Linux
# root      (hd0,1)
# kernel   /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
##      kopt_2_6_8=root=/dev/hdc1 ro
##      kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=e2464974-1964-47a4-934a-c964e3304f10 ro

## Setup crashdump menu entries
## e.g. crashdump=1
# crashdump=0

## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,1)

## should update-grub create alternative automagic boot options
## e.g. alternative=true
##      alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
##      lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash locale=pt_BR

## should update-grub lock old automagic boot options
## e.g. lockold=false
##      lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
##      altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
##      howmany=7
# howmany=all

## should update-grub create memtest86 boot option
## e.g. memtest86=true
##      memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## ## End Default Options ##

title      Ubuntu, kernel 2.6.20-16-generic
root      (hd0,1)
kernel      /boot/vmlinuz-2.6.20-16-generic root=UUID=e2464974-1964-47a4-934a-c964e3304f10 ro quiet splash locale=pt_BR
initrd      /boot/initrd.img-2.6.20-16-generic
quiet
savedefault

title      Ubuntu, kernel 2.6.20-16-generic (recovery mode)
root      (hd0,1)
kernel      /boot/vmlinuz-2.6.20-16-generic root=UUID=e2464974-1964-47a4-934a-c964e3304f10 ro single
initrd      /boot/initrd.img-2.6.20-16-generic

title      Ubuntu, kernel 2.6.20-15-generic
root      (hd0,1)
kernel      /boot/vmlinuz-2.6.20-15-generic root=UUID=e2464974-1964-47a4-934a-c964e3304f10 ro quiet splash locale=pt_BR
initrd      /boot/initrd.img-2.6.20-15-generic
quiet
savedefault

title      Ubuntu, kernel 2.6.20-15-generic (recovery mode)
root      (hd0,1)
kernel      /boot/vmlinuz-2.6.20-15-generic root=UUID=e2464974-1964-47a4-934a-c964e3304f10 ro single
initrd      /boot/initrd.img-2.6.20-15-generic

title      Ubuntu, memtest86+
root      (hd0,1)
kernel      /boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.
title      Other operating systems:
root


# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda1
title      Microsoft Windows XP Professional
root      (hd0,0)
savedefault
makeactive
chainloader   +1

[fr4nc0w]

So completando...

a particao linux ta formatada em EXT3

[clcampos]

Faça um backup do seu arquivo e substitua ele por este aqui para ver se funciona:

Código Selecionar Expandir


# menu.lst - See: grub(8), info grub, update-grub(8)
#            grub-install(8), grub-floppy(8),
#            grub-md5-crypt, /usr/share/doc/grub
#            and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not change this entry to 'saved' or your
# array will desync and will not let you boot your system.
default      6

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout      10

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line)  and entries protected by the
# command 'lock'
# e.g. password topsecret
#      password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title      Windows 95/98/NT/2000
# root      (hd0,0)
# makeactive
# chainloader   +1
#
# title      Linux
# root      (hd0,1)
# kernel   /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
##      kopt_2_6_8=root=/dev/hdc1 ro
##      kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=e2464974-1964-47a4-934a-c964e3304f10 ro

## Setup crashdump menu entries
## e.g. crashdump=1
# crashdump=0

## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,1)

## should update-grub create alternative automagic boot options
## e.g. alternative=true
##      alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
##      lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash locale=pt_BR

## should update-grub lock old automagic boot options
## e.g. lockold=false
##      lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
##      altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
##      howmany=7
# howmany=all

## should update-grub create memtest86 boot option
## e.g. memtest86=true
##      memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## ## End Default Options ##

title      Ubuntu, kernel 2.6.20-16-generic
root      (hd0,2)
kernel      /boot/vmlinuz-2.6.20-16-generic root=/dev/sda3 ro quiet splash locale=pt_BR
initrd      /boot/initrd.img-2.6.20-16-generic
quiet
savedefault

title      Ubuntu, kernel 2.6.20-16-generic (recovery mode)
root      (hd0,2)
kernel      /boot/vmlinuz-2.6.20-16-generic root=/dev/sda3 ro single
initrd      /boot/initrd.img-2.6.20-16-generic

title      Ubuntu, memtest86+
root      (hd0,3)
kernel      /boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.
title      Other operating systems:
root


# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda1
title      Microsoft Windows XP Professional
root      (hd0,0)
savedefault
makeactive
chainloader   +1


[fr4nc0w]

Vlw velho pela ajuda, mas vou fazer uma limpeza aki, e ja aproveito e instalo de volta meu ubuntu e tals, vo aumenta a partição dele q tinha apenas 7gb e tals, vai ser melhor...


flw e vlw msm em cara !

vc alias poderia deixar ai pra mim a melhor maneira e mais segura de recuperar o GRUB depois de uma instalacao de windows?
sendo que eu sempre acabo formatando meu windows...e quase nunca o linux..

flw !

[clcampos]

Não funcionou? Que erro deu?


Seguem bons temas sobre grub.

http://wiki.ubuntubrasil.org/Grub
http://ubuntuforum-pt.org/index.php?topic=4055.0
http://ubuntuforum-pt.org/index.php?topic=17086.0

E este é o melhor: Mil e uma maneiras de recuperar o Grub.